Diversidade fenotípica e patogênica de Colletotrichum, agente causal da antracnose em mangueira, e identificação de espécie

O presente trabalho teve como objetivo estudar a diversidade fenotípica e patogênica de 40 isolados de Colletotrichum obtidos de mangueira no Nordeste do Brasil e identificar diferentes espécies desse fitopatógeno, agente causal de antracnose, através da análise da seqüência da região ITS do rDNA. Quanto à caracterização morfológica e cultural, as colônias dos isolados apresentaram diversidade em relação à cor e aspecto, sendo mais comum à cor branco-cinza, característica de Colletotrichum gloeosporioides. Não foram observadas variações expressivas na morfologia dos 40 isolados. Os conídios apresentaram-se, predominantemente, hialinos e unicelulares, com formato variando de bastonete para cilíndrico. Todos os isolados produziram apressórios variados em formato e quantidade e apenas 10 isolados apresentaram setas. Para efeito do crescimento micelial e taxa de crescimento foi possível classificar os isolados em sete grupos. Vinte e dois isolados exibiram taxa de crescimento >10mm/dia, considerada típica da espécie C. gloeosporioides. Os isolados foram patogênicos em folhas destacadas de mangueira, induzindo sintomas de antracnose, na forma de manchas escuras levemente deprimidas, e apresentando variações quanto à agressividade. Na identificação específica, baseada na análise da seqüência ITS do DNA ribossomal, 36 isolados amplificaram com o oligonucleotídeos CgInt, específico para C. gloeosporioides e o ITS4, Os isolados CM1, CM4, CM5 e CM10, não amplificaram produtos para nenhum dos oligonucleotídeos específicos, sendo identificados como Colletotrichum spp. Os resultados desse trabalho demonstraram que isolados de Colletotrichum, obtidos de mangueira, apresentam ampla variabilidade morfofisiológica e patogênica. E que, possivelmente, existe mais de uma espécie de Colletotrichum que causa antracnose em mangueira no Nordeste do Brasil.

In vivo sensitivity reduction of Puccinia triticina races, causal agent of wheat leaf rust, to DMI and QoI fungicides

Experiments were carried out to determine in vivo the IC50 and the IC90 for demethylation-inhibitor fungicides (DMIs, triazoles) and quinone outside inhibitors (QoIs, strobilurins) to the five most frequent races of Puccinia triticina in 2007 growing season in Southern Brazil. The tests were done in a greenhouse with wheat seedlings. DMI fungicides were tested at the concentrations, in mg/L, 0.0; 0.02; 0.2; 2.0; 20.0; 100.0 and 200.0, and QoIs at the concentrations 0.0; 0.0001; 0.001; 0.01; 0.1; 1 and 10.0 mg of active ingredient/L water. Fungicides were preventively applied at 24 hours before the inoculation of seedlings with the fungal spores. The effect of treatments was assessed based on the number of uredia/cm². The lowest IC50 (inhibitory concentration) for DMI fungicides determined for MCG-MN, sensitive race, ranged from 0.33 to 0.91 mg/L, while the highest values for MDP-MR, MDT-MR, MDK-MR, MFH-HT races, varied from 9.63 to 85.64 mg/L (suspected insensitivity). QoI fungicide presented an IC50 varying from 0.0018 to 0.14 mg/L. The sensitivity reduction factor for DMIs varied from 8.8 to 238.8, and for QoIs from 0.3 to 1.5 mg/L. Sensitivity reduction was confirmed for the races MDP-MR, MDT-MR, MDK-MR, MFH-HT to DMIs, as well as their sensitivity to QoI fungicides.

Fungicide baseline for mycelial sensitivity of Exserohilum turcicum, causal agent of northern corn leaf blight

Northern corn leaf blight, caused by Exserohilum turcicum(Et), is one of the major corn diseases which can reduce grain yield and quality. The aim of this study was to determine the mycelial sensitivity of ten Etisolates, five from Argentina and five from Brazil, to six fungicides (carbendazim, captan, fludioxinil, metalaxyl, iprodione and thiram) used in seed treatment. The inhibitory concentration (IC50) was determined by using seven concentrations of the fungicides supplemented to the agar medium. The mycelial colony diameter was measured with a digital caliper. Experimental design was completely randomized with four replicates. Data on the percent mycelial growth inhibition were analyzed by logarithmic regression and the IC50 was calculated. The fungicide iprodione was the most potent, with IC50 < 0.01 mg/L, followed by fludioxonil, IC50 0.31 mg/L, and thiram, 1.37 mg/L. Carbendazim, metalaxyl and captan were classified as non-fungitoxic, showing IC50 > 50 mg/L for all isolates. Although iprodione is the most potent fungicide, it is not used for corn seed treatment. The IC50s obtained in this study can be used as baseline for future monitoring studies of Etsensitivity to fungicides.

Reação à Bipolaris maydis, agente causal da mancha foliar, em híbridos apomíticos de Panicum maximum

A mancha foliar, causada por Bipolaris maydis, é a principal doença de Panicum maximum. A seleção de genótipos resistentes é a melhor estratégia para o controle desta doença. Com o objetivo de identificar fontes de resistência de P. maximum à mancha foliar, 92 híbridos apomíticos, originários de cruzamentos das cultivares Tanzânia-1 e Mombaça, e outros três genótipos sexuais foram testados. Em blocos casualizados, com oito repetições cada, inocularam-se plantas com 30 dias de idade e, após 12 dias, a severidade da doença foi avaliada. Foram verificadas diferenças significativas (P<0,05), de genótipos entre e dentro das progênies, com relação a resistência à mancha foliar. Identificaram-se híbridos com resistência à doença, com destaque para os híbridos MS81, A109, B109, B89 e A4.

UMA TEORÍA CAUSAL PARA LOS CASOS FREGE

Fodor ha argumentado a favor de un par de tesis que pueden caracterizarse como constituyendo un dilema: Por un lado, si adoptamos una teoría funcional para los conceptos explicamos semánticamente los casos Frege pero caemos en el holismo semántico. Por otro lado, si adoptamos una teoría causal/informacional evitamos el holismo pero no explicamos los casos Frege semánticamente. Fodor (por ej, 1994, 1998 y 2008) intenta evitar la segunda parte del dilema argumentando que los casos de Frege pueden tener una explicación sintáctica y no semántica. En este trabajo intentaré ofrecer una salida alternativa al dilema fodoriano. Propondré una explicación semántica de los casos Frege que incorpora tanto elementos de una teoría causal como de una de rol funcional. Afirmaré que el contenido cognitivo o estrecho de un concepto (el tipo de contenido aparentemente exigido por los casos Frege) es el conjunto de contenidos causales/informacionales de las representaciones que figuran en su rol funcional. Considero que individuar a las representaciones en los roles por medio de sus contenidos causales permite evitar el holismo (evitando el proceso de ramsificación típicamente empleado para individuar a los roles) y que identificar el contenido cognitivo con contenidos causales/informacionales de las representaciones en los roles permite evitar el referencialismo de las propuestas causales (podemos distinguir sentido de referencia en términos causales).

Use data from permanent sampling points in growth and yield modeling

This study was carried to evaluate the efficiency of the Bitterlich method in growth and yield modeling of the even-aged Eucalyptus stands. 25 plots were setup in Eucalyptus grandis cropped under a high bole system in the Central Western Region of Minas Gerais, Brazil. The sampling points were setup in the center of each plot. The data of four annual mesurements were colleted and used to adjust the three model types using the age, the site index and the basal area as independent variables. The growths models were fitted for volume and mass of trees. The efficiency of the Bitterlich method was confirmed for generating the data for growth and yield modeling.

Hipsometric relationship modeling using data sampled in tree scaling and inventory plots

This work evaluated eight hypsometric models to represent tree height-diameter relationship, using data obtained from the scaling of 118 trees and 25 inventory plots. Residue graphic analysis and percent deviation mean criteria, qui-square test precision, residual standard error between real and estimated heights and the graybill f test were adopted. The identity of the hypsometric models was also verified by applying the F(Ho) test on the plot data grouped to the scaling data. It was concluded that better accuracy can be obtained by using the model prodan, with h and d1,3 data measured in 10 trees by plots grouped into these scaling data measurements of even-aged forest stands.

MODELING A COMPUTER APPLICATION FOR MANAGEMENT OF MAINTENANCE ACTIVITIES OF UNPAVED ROADS

ABSTRACTThis study presents a contribution to the modeling of a computer application employing a method of serviceability performance for unpaved roads, aiming the management of maintenance/restoration activities of the primary surface layer. The proposed methodology consisted of field inspections during dry (April to September) and rainy (October to March) periods, during which objective evaluations were performed to survey of defects and their densities and degrees of severity. To aid the functional classification of analyzed road sections and the determination of the defect with major influence on the serviceability of these roads, the method of serviceability performance proposed by Silva (2009)was implemented in the Visual Basic for Applications (VBA) language in Microsoft Excel software. With the use of the computer application proposed it was possible to identify among the defects analyzed in field, through the index of serviceability of the sampling unit per defect type (ISUdef), which one had the greatest influence on determining the relative serviceability index per road section (IST). The results allow us to conclude that the computer application Road achieved satisfactory results, since the objective evaluation criteria applied to road sections denotes consistency regarding their serviceability.

MODELING AND SIMULATION OF RELIEF INFLUENCE ON EUCALYPTUS FORESTS: INTERACTION BETWEEN SOLAR IRRADIANCE AND PRODUCTIVITY

ABSTRACT This study aimed to verify the differences in radiation intensity as a function of distinct relief exposure surfaces and to quantify these effects on the leaf area index (LAI) and other variables expressing eucalyptus forest productivity for simulations in a process-based growth model. The study was carried out at two contrasting edaphoclimatic locations in the Rio Doce basin in Minas Gerais, Brazil. Two stands with 32-year-old plantations were used, allocating fixed plots in locations with northern and southern exposure surfaces. The meteorological data were obtained from two automated weather stations located near the study sites. Solar radiation was corrected for terrain inclination and exposure surfaces, as it is measured based on the plane, perpendicularly to the vertical location. The LAI values collected in the field were used. For the comparative simulations in productivity variation, the mechanistic 3PG model was used, considering the relief exposure surfaces. It was verified that during most of the year, the southern surfaces showed lower availability of incident solar radiation, resulting in up to 66% losses, compared to the same surface considered plane, probably related to its geographical location and higher declivity. Higher values were obtained for the plantings located on the northern surface for the variables LAI, volume and mean annual wood increase, with this tendency being repeated in the 3PG model simulations.

Computational modeling for irrigated agriculture planning. Part I: general description and linear programming

Linear programming models are effective tools to support initial or periodic planning of agricultural enterprises, requiring, however, technical coefficients that can be determined using computer simulation models. This paper, presented in two parts, deals with the development, application and tests of a methodology and of a computational modeling tool to support planning of irrigated agriculture activities. Part I aimed at the development and application, including sensitivity analysis, of a multiyear linear programming model to optimize the financial return and water use, at farm level for Jaíba irrigation scheme, Minas Gerais State, Brazil, using data on crop irrigation requirement and yield, obtained from previous simulation with MCID model. The linear programming model outputted a crop pattern to which a maximum total net present value of R$ 372,723.00 for the four years period, was obtained. Constraints on monthly water availability, labor, land and production were critical in the optimal solution. In relation to the water use optimization, it was verified that an expressive reductions on the irrigation requirements may be achieved by small reductions on the maximum total net present value.

Computational modeling for irrigated agriculture planning. Part II: risk analysis

Techniques of evaluation of risks coming from inherent uncertainties to the agricultural activity should accompany planning studies. The risk analysis should be carried out by risk simulation using techniques as the Monte Carlo method. This study was carried out to develop a computer program so-called P-RISCO for the application of risky simulations on linear programming models, to apply to a case study, as well to test the results comparatively to the @RISK program. In the risk analysis it was observed that the average of the output variable total net present value, U, was considerably lower than the maximum U value obtained from the linear programming model. It was also verified that the enterprise will be front to expressive risk of shortage of water in the month of April, what doesn't happen for the cropping pattern obtained by the minimization of the irrigation requirement in the months of April in the four years. The scenario analysis indicated that the sale price of the passion fruit crop exercises expressive influence on the financial performance of the enterprise. In the comparative analysis it was verified the equivalence of P-RISCO and @RISK programs in the execution of the risk simulation for the considered scenario.

Modeling and simulation of forced-air cooling of strawberries using variable convective coefficient

In the forced-air cooling process of fruits occurs, besides the convective heat transfer, the mass transfer by evaporation. The energy need in the evaporation is taken from fruit that has its temperature lowered. In this study it has been proposed the use of empirical correlations for calculating the convective heat transfer coefficient as a function of surface temperature of the strawberry during the cooling process. The aim of this variation of the convective coefficient is to compensate the effect of evaporation in the heat transfer process. Linear and exponential correlations are tested, both with two adjustable parameters. The simulations are performed using experimental conditions reported in the literature for the cooling of strawberries. The results confirm the suitability of the proposed methodology.

Characterization of soil parameters of two soils of Rio Grande do Sul in modeling the prediction of tractive effort

The interaction between the soil and tillage tool can be examined using different parameters for the soil and the tool. Among the soil parameters are the shear stress, cohesion, internal friction angle of the soil and the pre-compression stress. The tool parameters are mainly the tool geometry and depth of operation. Regarding to the soils of Rio Grande do Sul there are hardly any studies and evaluations of the parameters that have importance in the use of mathematical models to predict tensile loads. The objective was to obtain parameters related to the soils of Rio Grande do Sul, which are used in soil-tool analysis, more specifically on mathematical models that allow the calculation of tractive effort for symmetric and narrow tools. Two of the main soils of Rio Grande do Sul, an Albaqualf and a Paleudult were studied. Equations that relate the cohesion, internal friction angle of the soil, adhesion, soil-tool friction angle and pre-compression stress as a function of water content in the soil were obtained, leading to important information for use of mathematical models for tractive effort calculation.