Multiple scales analysis of nonlinear oscillations of a portal frame foundation for several machines

An analytical study of the nonlinear vibrations of a multiple machines portal frame foundation is presented. Two unbalanced rotating machines are considered, none of them resonant with the lower natural frequencies of the supporting structure. Their combined frequencies is set in such a way as to excite, due to nonlinear behavior of the frame, either the first anti-symmetrical mode (sway) or the first symmetrical mode. The physical and geometrical characteristics of the frame are chosen to tune the natural frequencies of these two modes into a 1:2 internal resonance. The problem is reduced to a two degrees of freedom model and its nonlinear equations of motions are derived via a Lagrangian approach. Asymptotic perturbation solutions of these equations are obtained via the Multiple Scales Method.

Be-Fe coupled method for the analysis of 3D elastodynamic problems in the time domain

By coupling the Boundary Element Method (BEM) and the Finite Element Method (FEM) an algorithm that combines the advantages of both numerical processes is developed. The main aim of the work concerns the time domain analysis of general three-dimensional wave propagation problems in elastic media. In addition, mathematical and numerical aspects of the related BE-, FE- and BE/FE-formulations are discussed. The coupling algorithm allows investigations of elastodynamic problems with a BE- and a FE-subdomain. In order to observe the performance of the coupling algorithm two problems are solved and their results compared to other numerical solutions.

Buckling analysis of PVC sheets with RIB

This study has a technical and applied character. A PVC structured wall pipe can be produced by spirally winding a ribbed sheet having a male-female lock, chemically welded by an adhesive. These pipes are "flexible" and are used mainly in underground installations, to convey fluids in free duct regime. Initial studies have indicated that the buckling resistance of the ribs from the sheet coiling to the tube manufacturing is the critical design parameter. This study presents the theoretical analytical development in order to obtain the critical buckling moment of these sheets. This analysis uses concepts initially developed to calculate buckling resistance in monosymmetrical profiles that are very used in the metallic structure industry. Since the material used was PVC, that has different mechanical properties than steel and aluminum, it was necessary to consider the differences in the analytical treatment. It is important to emphasize that the results obtained are product of the co-operative work of engineers from industry and university.

Modeling of the Fluid-Structure Interaction in Inelastic Piping Systems

In many engineering applications, compliant piping systems conveying liquids are subjected to inelastic deformations due to severe pressure surges such as plastic tubes in modern water supply transmission lines and metallic pipings in nuclear power plants. In these cases the design of such systems may require an adequate modeling of the interactions between the fluid dynamics and the inelastic structural pipe motions. The reliability of the prediction of fluid-pipe behavior depends mainly on the adequacy of the constitutive equations employed in the analysis. In this paper it is proposed a systematic and general approach to consistently incorporate different kinds of inelastic behaviors of the pipe material in a fluid-structure interaction analysis. The main feature of the constitutive equations considered in this work is that a very simple numerical technique can be used for solving the coupled equations describing the dynamics of the fluid and pipe wall. Numerical examples concerning the analysis of polyethylene and stainless steel pipe networks are presented to illustrate the versatility of the proposed approach.

Analysis of open CNC architecture for machine tools

The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.

Variability and Genetic Structure in Populations of Arrabidaea bilabiata (Sprague) Sandwith in the Amazonas State

Weeds in pastures can intoxicate animals, and Arrabidaea bilabiata is the most important species for herbivores in floodplain areas in the Amazon Basin. Genetic diversity studies in natural populations may contribute to the better understanding of the range of toxicity and the genetic variability organization in this species. The objective of this study was to assess the variability and genetic structure in six populations of A. bilabiata sampled in floodplain areas in three municipalities of the Amazonas State, from the AFLP markers analysis. AFLP markers were efficient to characterize the genetic variability of the 65 individuals analyzed. From four combinations of oligonucleotides, a total of 309 AFLP fragments was obtained, where 304 (98.38%) were polymorphic. By the dendrogram and Bayesian cluster analysis, there was a formation of two isolated groups, the first one comprising individuals from Autazes municipality and the second one comprising individuals from Itacoatiara and Parintins. However, depending on the method to define the most probable cluster number, there was a separation of the six populations, according to their geographical origin. Mantel test confirmed that geographically closer populations are more akin, although low gene flow (0.538) is observed among the sampled populations. The molecular analysis of variance found that 49.29% of the genetic variability are among individuals inside populations and 50.71% among the populations analyzed. The results indicate the possibility that isolated A. bilabiata populations contain plants with different toxicity levels and suggest a strong adaptability of the species.

Horizontal and vertical tree community structure in a lowland atlantic rain forest, southeastern Brazil

The horizontal and vertical tree community structure in a lowland Atlantic Rain Forest was investigated through a phytosociological survey in two 0.99 ha plots in the Intervales State Park, São Paulo State. All trees > 5 cm diameter at breast height were recorded. 3,078 individuals belonging to 172 species were identified and recorded. The Shannon diversity index was H' = 3.85 nat.ind.-1. The Myrtaceae family showed the greatest floristic richness (38 species) and the highest density (745 individuals) in the stand. Euterpe edulis Mart. had the highest importance value (33.98%) accounting for 21.8% of all individuals recorded. The quantitative similarity index was higher than the qualitative index, showing little structural variation between plots. However, the large number of uncommon species resulted in pronounced floristic differences. A detrended correspondence analysis (DCA) generated three arbitrary vertical strata. Stratum A (> 26 m), where Sloanea guianensis (Aubl.) Benth. and Virola bicuhyba (Schott. ex A.DC.) Warb. were predominant showed the lowest density. Stratum B (8 m < h < 26 m) had the greatest richness and diversity, and stratum C (< 8 m) showed the highest density. Euterpe edulis, Guapira opposita (Vell.) Reitz, Garcinia gardneriana (Planch. & Triana) Zappi, and Eugenia mosenii (Kausel) Sobral were abundant in strata B and C. The occurrence of strata in tropical forests is discussed and we recommend the use of DCA for others studies of the vertical distribution of tropical forest tree communities.

Plant species and habitat structure in a sand dune field in the brazilian Caatinga: a homogeneous habitat harbouring an endemic biota

One dune habitat in the semi-arid Caatinga Biome, rich in endemisms, is described based on plant species composition, woody plant density, mean height and phenology and a multivariate analysis of the micro-habitats generated by variables associated to plants and topography. The local flora is composed mainly by typically sand-dweller species of Caatinga, suggesting the existence of a phytogeographic unity related to the sandy areas in the Caatinga biome, which seems to be corroborated by faunal distribution. Moreover, some species are probably endemic from the dunes, a pattern also found in vertebrates. The plant distribution is patchy, there is no conspicuous herbaceous layer and almost 50% of the ground represents exposed sand. Phenology is not synchronized among species, occurring leaves budding and shedding, flowers development and anthesis, fruits production and dispersion both in rainy and dry seasons. Leaf shedding is low compared to the level usually observed in Caatinga areas and about 50% of the woody individuals were producing leaves in both seasons. Spectrum of dispersal syndromes shows an unexpected higher proportion of zoochorous species among the phanerophytes, accounting for 31.3% of the species, 78.7% of the total frequency and 78.6% of the total density. The habitat of the dunes is very simple and homogeneous in structure and most of environmental variance in the area is explained by one gradient of woody plants density and another of increase of Bromelia antiacantha Bertol. (Bromeliaceae) and Tacinga inamoena (K. Schum.) N.P. Taylor & Stuppy (Cactaceae) toward valleys, which seem to determine two kinds of protected micro-habitats for the small cursorial fauna.

Spatial variation in the structure and floristic composition of "restinga" vegetation in southeastern Brazil

We examined large-scale spatial variation of structural parameters and floristic composition in open Clusia scrub, a vegetation type of the Brazilian "restingas" (sandy coastal plain vegetation). This vegetation is organized in islands separated by sandy stretches with sparse herbaceous vegetation. We located 12 sample areas on three consecutive beach ridges, lying parallel to the coastline and at different distances from the ocean, in close proximity to two lagoons (Cabiúnas and Comprida). Each sample area was divided into three strips. We used the line intercept method to sample all woody plants ³ 50 cm tall. We used nested ANOVA to verify structural variation between different sampling scales. TWINSPAN analysis was performed to examine the variation in floristic composition between areas. The overall diversity index was 3.07. Six species are repeatedly dominant throughout the entire sampling area. There was homogeneity in relation to diversity and species richness between beach ridges but not within beach ridges. Floristic composition and structural parameters did not vary in relation to distance from the sea but floristic composition did vary as a function of proximity to Cabiúnas or Comprida lagoon. Differences in plant cover between sample areas may be related to the paleoformation of this sandy coastal plain.

Structural analysis of the vegetation on a highland granitic rock outcrop in Southeast Brazil

Granitic rock outcrops of the Brazilian southeast are either coastal or inland. The latter can often have high altitudes, such as in the summits of "Serra do Mar" and "Serra da Mantiqueira", where they are known as "Campos de Altitude". The landscape on these high altitude plateaux is often a mosaic of shrubs and treelets within a bunchgrass matrix, with sparse pteridophytes and other herbs, interspersed with variable extensions of rock outcrops. Despite the pervasiveness of rock outcrops in the Brazilian landscape, studies on the structural analysis of the vegetation on such formations are scarce. This study aimed to analyze the structure of the vegetation on a highland granitic rock outcrop in "Parque Estadual da Serra do Brigadeiro", state of Minas Gerais, Southeast Brazil (42°20' - 42°40' S and 20°20' - 21°00' W, 1,722 m of elevation ). Quantitative parameters of absolute and relative frequency and dominance (cover) were estimated. The group analysis used the Jaccard similarity index. Trilepis lhotzkiana, Panicum sp. 1, and Vellozia variegata presented the highest relative frequencies, relative dominances and importance values. These three species, along with Dyckia bracteata, Rhynchospora emaciate, and Tibouchina cf. manicata, represented 98.3% of the relative dominance. The remaining 1.7% referred to 22 remaining species. The distinction among quadrats within formed groups by cluster analysis was due to the great number of low frequency species.

Floristic and vegetation structure of a granitic grassland in Southern Brazil

A floristic and structural survey of a natural grassland community was conducted on Morro do Osso, a granitic hill in Porto Alegre, RS, Brazil. Structural data were surveyed in 39 one square meter plots placed over two major grassland areas. An accidental fire has occurred in one of the areas approximately one year prior to our survey, leading to further analysis of parameters differences between sites. The floristic list contains 282 species, whereas the structural survey has found 161 species. Families with highest accumulated importance values were Poaceae, Asteraceae and Fabaceae. The diversity and evenness indexes were 4.51 nats ind-1 and 0.86, respectively. Cluster analysis denoted two groups coinciding with the areas distinguished by the fire disturbance. A similarity analysis between our data and two other data sets from nearby granitic hills resulted in 28% to 35% similarity, with equivalent species-family distribution and many common dominant species, corroborating the concept of a continuous flora along the South Brazilian granitic hills.

Influence of edaphic variables on the floristic composition and structure of the tree-shrub vegetation in typical and rocky outcrop cerrado areas in Serra Negra, Goiás State, Brazil

The present study analyzed the influence of edaphic variables on the floristic compositions and structures of the arboreal and shrub vegetation of typical cerrado (TC) and rocky outcrop cerrado (RC) communities in the Serra Negra mountain range in Piranhas Municipality, Goiás State, Brazil. Ten 20×50m plots were established in each community, and all individuals with minimum diameters ³5cm measured at 30cm above soil level were sampled. Composite soil samples were collected at 0-20cm depths in each plot for physical and chemical analyses. The proportions of above-ground rock cover work also estimated in each RC plot. A total of 2,009 individuals (83 species, 69 genera, and 34 families) were recorded. Qualea parviflora was the only species consistently among the 10 most structurally important taxa in both communities, and was considered a generalist species. The observed and estimated species richnesses were greater in RC than in TC, although plant basal areas and heights did not differ between them. There were positive correlations between rock cover×plant density and rock cover×basal areas. TWINSPAN and PCA analysis separated the TC and RC plots, and three RC habitat specialist species (Wunderlichia mirabilis, Norantea guianensis, and Tibouchina papyrus) were identified. Soil variables were found to have greater effects on the species compositions of the TC and RC sites than the geographic distances between sampling plots. According to CCA analysis, the exclusive (or more abundant species) of each community were correlated with soil variables, and these variables therefore determined the selection of some species and influenced the differentiation of the vegetation structures of the communities studied.

Molecular biology of the kallikrein-kinin system: from structure to function

The participation of the kallikrein-kinin system, comprising the serine proteases kallikreins, the protein substrates kininogens and the effective peptides kinins, in some pathological processes like hypertension and cardiovascular diseases is still a matter of controversy. The use of different experimental set-ups in concert with the development of potent and specific inhibitors and antagonists for the system has highlighted its importance but the results still lack conclusivity. Over the last few years, transgenic and gene-targeting technologies associated with molecular biology tools have provided specific information about the elusive role of the kallikrein-kinin system in the control of blood pressure and electrolyte homeostasis. cDNA and genomic sequences for kinin receptors B2 and B1 from different species were isolated and shown to encode G-protein-coupled receptors and the structure and pharmacology of the receptors were characterized. Transgenic animals expressing an overactive kallikrein-kinin system were established to study the cardiovascular effects of these alterations and the results of these investigations further corroborate the importance of this system in the maintenance of normal blood pressure. Knockout animals for B2 and B1 receptors are available and their analysis also points to the role of these receptors in cardiovascular regulation and inflammatory processes. In this paper the most recent and relevant genetic animal models developed for the study of the kallikrein-kinin system are reviewed, and the advances they brought to the understanding of the biological role of this system are discussed.

Cloning and characterization of Echinococcus granulosus (Cestode) EgactI and EgactII actin gene promoters and their functional analysis in the NIH3T3 mouse cell line

We report here for the first time the structure and function of a promoter from a cestode. The ability of DNA fragments respectively encompassing the 935-bp and 524-bp regions upstream from the ATG codon from the EgactI and EgactII actin genes of Echinococcus granulosus to promote transcription was studied in the NIH3T3 mouse cell line. The results of transfection assays showed that both regions have strong promoter activity in these cells. The fragments were tested in both orientations and the 524-bp fragment of EgactII presented a bidirectional promoter activity. Deletion analysis of EgactI and EgactII promoters indicated the presence of regulatory regions containing putative silencer elements. These results indicate that both EgactI and EgactII promoters are functional and that the preliminary functional evaluation of E. granulosus and possibly of other cestode promoters can be performed in heterologous cell lines.

Aggrecan structure in amphibian cartilage

The structure of the large proteoglycan present in the bullfrog epiphyseal cartilage was studied by immunochemical and biochemical methods. The isolated monomer showed a polydisperse behavior on Sepharose CL2B, with a peak at Kav = 0.14. Chondroitin sulfate chains were identified by HPLC analysis of the products formed by chondroitinase digestion and mercuric acetate treatment. These chains have approximately 38 disaccharides, a Di45:Di68 ratio of 1.6 and GalNAc4S + GalNAc4,6S are the main non-reducing terminals. Keratan sulfate was identified by the use of two monoclonal antibodies in Western blots after chondroitinase ABC treatment. A keratan sulfate-rich region (~110 kDa) was isolated by sequential treatment with chondroitinase ABC and proteases. We also employed antibodies in Western blotting experiments and showed that the full length deglycosylated core protein is about 300 kDa after SDS-PAGE. Domain-specific antibodies revealed the presence of immunoreactive sites corresponding to G1/G2 and G3 globular domains and the characterization of this large proteoglycan as aggrecan. The results indicate the high conservation of the aggrecan domain structure in this lower vertebrate.