Simulation of Steady-State Nonlinear Heat Transfer Problems Through the Minimization of Quadratic Functionals

In this work it is presented a systematic procedure for constructing the solution of a large class of nonlinear conduction heat transfer problems through the minimization of quadratic functionals like the ones usually employed for linear descriptions. The proposed procedure gives rise to an efficient and easy way for carrying out numerical simulations of nonlinear heat transfer problems by means of finite elements. To illustrate the procedure a particular problem is simulated by means of a finite element approximation.

Simulation of Active Control Using Fuzzy Logic Applied to a Pulse Combustor

This work analyzes an active fuzzy logic control system in a Rijke type pulse combustor. During the system development, a study of the existing types of control for pulse combustion was carried out and a simulation model was implemented to be used with the package Matlab and Simulink. Blocks which were not available in the simulator library were developed. A fuzzy controller was developed and its membership functions and inference rules were established. The obtained simulation showed that fuzzy logic is viable in the control of combustion instabilities. The obtained results indicated that the control system responded to pulses in an efficient and desirable way. It was verified that the system needed approximately 0.2 s to increase the tube internal pressure from 30 to 90 mbar, with an assumed total delay of 2 ms. The effects of delay variation were studied. Convergence was always obtained and general performance was not affected by the delay. The controller sends a pressure signal in phase with the Rijke tube internal pressure signal, through the speakers, when an increase the oscillations pressure amplitude is desired. On the other hand, when a decrease of the tube internal pressure amplitude is desired, the controller sends a signal 180º out of phase.

Wind tunnel simulation of atmospheric boundary layer flows

The present work shows how thick boundary layers can be produced in a short wind tunnel with a view to simulate atmospheric flows. Several types of thickening devices are analysed. The experimental assessment of the devices was conducted by considering integral properties of the flow and the spectra: skin-friction, mean velocity profiles in inner and outer co-ordinates and longitudinal turbulence. Designs based on screens, elliptic wedge generators, and cylindrical rod generators are analysed. The paper describes in detail the experimental arrangement, including the features of the wind tunnel and of the instrumentation. The results are compared with experimental data published by other authors and with naturally developed flows.

Seismic motion simulation based on Cassino Parallel Manipulator

In this paper we present a study of feasibility by using Cassino Parallel Manipulator (CaPaMan) as an earthquake simulator. We propose a suitable formulation to simulate the frequency, amplitude and acceleration magnitude of seismic motion by means of the movable platform motion by giving a suitable input motion. In this paper we have reported numerical simulations that simulate the three principal earthquake types for a seismic motion: one at the epicenter (having a vertical motion), another far from the epicenter (with the motion on a horizontal plane), and a combined general motion (with a vertical and horizontal motion).

Neutron tomography using projection data obtained by Monte Carlo simulation for nondestructive evaluation

This work present the application of a computer package for generating of projection data for neutron computerized tomography, and in second part, discusses an application of neutron tomography, using the projection data obtained by Monte Carlo technique, for the detection and localization of light materials such as those containing hydrogen, concealed by heavy materials such as iron and lead. For tomographic reconstructions of the samples simulated use was made of only six equal projection angles distributed between 0º and 180º, with reconstruction making use of an algorithm (ARIEM), based on the principle of maximum entropy. With the neutron tomography it was possible to detect and locate polyethylene and water hidden by lead and iron (with 1cm-thick). Thus, it is demonstrated that thermal neutrons tomography is a viable test method which can provide important interior information about test components, so, extremely useful in routine industrial applications.

Testing and simulation of fractionary electromechanical rotative drives

This paper concerns the development of drives that use electromechanical rotative motor systems. It is proposed an experimental drive test structure integrated to simulation softwares. The objective of this work is to show that an affordable model validation procedure can be obtained by combining a precision data acquisition with well tuned state-of-the-art simulation packages. This is required for fitting, in the best way, a drive to its load or, inversely, to adapt loads to given drive characteristics.

Aquatic plant community in porto primavera reservoir

Aiming to identify the populations of aquatic plants present in the Porto Primavera reservoir and evaluate the behavior of Hydrilla verticillata colonization of this water body a survey was carried out in 2007. The data was based on presence or absence, only were assessed the presence or absence of the species and the data were subjected to cluster analysis to establish differences in distribution and occurrence of populations. The community of aquatic plants showed 24 species distributed in 16 botanical families. Cyperaceae and Pontederiaceae were the most representative in terms of species richness. The submerged macrophyte Hydrilla verticillata showed the highest frequency of occurrence in the water body, showing a different behavior from the other populations of the water body. Species like Eichhornia crassipes, Eichhornia azurea, Typha dominguensis and Oxycaryum cubense also showed different behavior in relation to other populations within the community, forming large populations in lagoons and backwater areas.

Effects of nutrient impoverishment on phytoplankton biomass: a mesocosms experimental approach in a shallow eutrophic reservoir (Garças Pond), São Paulo, southeast Brazil

Nutrient impoverishment in mesocosms was carried out in a shallow eutrophic reservoir aiming to evaluate the nutrient removal technique as a method for eutrophication reduction. Garças Pond is located in the Parque Estadual das Fontes do Ipiranga Biological Reserve situated in the southeast region of the municipality of São Paulo. Three different treatments were designed, each consisting of two enclosures containing 360 liters of water each. Mesocosms were made of polyethylene bags and PVC pipes, and were attached to the lake bottom. Treatment dilutions followed Carlson's trophic state index modified by Toledo and collaborators, constituting the oligotrophic, mesotrophic, and eutrophic treatments. Ten abiotic and 9 biological samplings were carried out simultaneously. Trophic states previously calculated for the treatments were kept unaltered during the entire experiment period, except for the mesotrophic mesocosms in which TP reached oligotrophic concentrations on the 31st day of the experiment. In all three treatments a reduction of DO was observed during the study period. At the same time, NH4+ and free CO2 rose, indicating decomposition within the enclosures. Nutrient impoverishment caused P limitation in all three treatments during most of the experiment period. Reduction of algal density, chlorophyll a, and phaeophytin was observed in all treatments. Competition for nutrients led to changes in phytoplankton composition. Once isolated and diluted, the mesocosms' trophic state did not change. This led to the conclusion that isolation of the allochthonous sources of nutrients is the first step for the recovery of the Garças Pond.

Cryptoglena, Monomorphina and Phacus (Euglenophyceae) of a reservoir in the State of Rio Grande do Sul, southern Brazil

Taxonomic survey of representatives of genera Cryptoglena Ehrenberg emend. Kosmala & Zakry´s, Monomorphina Mereschkowsky emend. Kosmala & Zakry´s and Phacus Dujardin (Euglenaceae, Euglenophyceae) of a reservoir in the municipality of Triunfo (30°02'15" S, 51°13'13" W), state of Rio Grande do Sul, southern Brazil. Samplings were performed at two stations during 14 consecutive months, from February 1995 to March 1996. Sixteen taxa including nine species, three varieties that are not typical of their respective species and one taxonomic forma also not typical of Phacus, two species of Monomorphina and one of Cryptoglena were identified. Phacuspseudobicarinatus is described as a new species. Phacuslongicauda (Ehrenberg) Dujardin var. longicauda, P. longicauda (Ehrenberg) Dujardin var. tortus Lemmermann, P. orbicularis Hübner, P. pleuronectes (O.F. Müller) Dujardin and P. pseudobicarinatusnov. sp. were the best represented taxa geographycally, occurring in more than 55% of samples studied. Phacuslongicauda var. longicauda and P. longicauda var. tortus were characteristic by their wide tolerance to the following environmental variables: pH, water temperature, organic matter concentration, total phosphorus and the nitrogen series (nitrite, nitrate, ammonium and total nitrogen). Phacusundulatus f. major is cited for the first time for Brazil.

The genera Chara and Nitella (Chlorophyta, Characeae) in the subtropical Itaipu Reservoir, Brazil

The family Characeae, represented by two genera in Brazil, Chara and Nitella, is considered to include the closest living relatives of land plants, and its members play important ecological role in aquatic ecosystems. The present taxonomic survey of Chara and Nitella was performed in tributaries that join to form the Brazilian shore of the Itaipu Reservoir on the Paraná River. Thirteen species were recorded, illustrated, and described: C. braunii var. brasiliensis R.Bicudo, C. guairensis R.Bicudo, N. acuminata A.Braun ex Wallman, N. furcata (Roxburgh ex Bruzileus) C.Agardh, and N. subglomerata A.Braun, already cited for the reservoir, and C. hydropitys Reichenbach, C. rusbyana Howe, N. axillaris A.Braun, N. glaziovii G.Zeller, N. gracilis (Smith) C.Agardh, N. hyalina (DC.) C.Agardh, N. inversa Imahori, and N. microcarpa A.Braun that represent new occurrences for the Itaipu Reservoir and Paraná State. Among the species encountered, C. guairensis, N. furcata, and N. glaziovii are widely distributed, while C. hydropitys and C. rusbyana have more restricted distributions.

Sugarcane spirit market share simulation: an application of conjoint analysis

This study evaluated the influence of packaging and labeling attributes of sugarcane spirit on consumers' behavior by applying the results of conjoint analysis in sugarcane spirit market share simulation. Firstly, a conjoint analysis was performed aiming to estimate the part-worths of each consumer for some sugarcane spirit packaging and labeling attributes. These part-worths were used in the market share simulation using the maximum utility model. It was observed that some packaging and labeling attributes affected consumer's purchase intention and that most consumers showed a similar preference pattern regarding these attributes. These consumers showed preference for the Seleta brand, which was bottled in 700 mL clear glass bottles with a metal screw cap that bore a label illustration unrelated to sugarcane spirit production process and had the information "aged 36 months in oak barrels". This study also showed that conjoint analysis and the use of its results in the market share simulation proved important tools to better understand consumer behavior towards intention to purchase sugarcane spirit.