213 resultados para Perfis estágios-défice de entalpia


Relevância:

20.00% 20.00%

Publicador:

Resumo:

An empirical equation: DMHmº = t i/b (where t i is the Kelvin temperature of the beginning of the thermal decomposition obtained from the thermogravimetry of the adducts; b is an empirical parameter wich depends on the metal halide and on the number of ligands) was obtained and tested for 53 adducts MX2.nL (where MX2 is a metal halide from the zinc group). The difference between experimental and calculated values was less than 6% for 22 adducts. To another 22 adducts, that difference was less than 10%. Only for 4 compounds the difference between experimental and calculated values exceeds 15%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An empirical equation: deltaD HmO = t i/2.2(2-n) is obtained and tested for 102 adducts (mainly adducts with zinc group halides). In the equation, t i is the Kelvin temperature of the beginning of the thermal decomposition of the adduct, (obtained by thermogravimetry), and n is the number of ligands. For 1/3 of the tested adducts the difference between experimental and calculated values was less than 5%. For about 1/3 of the adducts that difference exceeds 15%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work are presented two modified forms of Kapustinskii equation that could be used to estimate the values of the lattice enthalphies for adducts: DM Hm o=(-n.z+ .z- .10(2)/D).(1-d*/D) .K and DM Hm o=(-n.z+ .z-.10(2)/d).(1-d*/d).K.d. Two new parameters related with steric effects and donor power of the ligands, J anddare introduced. The proposed equations were tested for 49 adducts (mainly from the zinc group halides). The difference between experimental (calorimetric) and calculated values (using the proposed equations) values are less than 5% for 41 of the tested adducts.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

By using DSC data is shown that there are empirical correlations between lattice enthalpy, melting enthalpy and the temperature of melting for adducts, and that is possible, using only a single DSC curve, estimate the value of DM Hmq.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The quality of the gasoline utilized for fueling internal combustion engines with spark ignition is directly affected by the gasoline's properties. Thus, the fuel's properties must be in perfect equilibrium to allow the engine to perform optimally, not only insofar as fuel consumption is concerned, but also in order to reduce the emission of pollutants. Vapor pressure and vaporization enthalpy are important properties of a gasoline determining the fuel's behavior under different operating conditions in internal combustion engines. The study reported here involved the development of a device to determine the vapor pressure and the vaporization enthalpy of formulations containing volumes of 5, 15 and 25% of ethanol in four base gasolines (G1, G2, G3 and G4). The chemical composition of these gasolines was determined using a gas chromatographer equipped with a flame ionization detector (FID).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The effect of operational variables and their interaction in TPR profiles was studied using a fractional factorial experimental design. The heating rate and the reducing agent concentration were found to be the most important variables determining the resolution and sensitivity of the technique. They showed opposite effects. Therefore, they should be manipulated preferentially in order to obtain optimized TPR profiles. The effect of sample particle size was also investigated. The tests were carried out within a Cu/Zn/Al2O3 catalyst used for the water-gas shift reaction that presented two distinct species of Cu2+ in TPR profiles.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This article proposes an experimental procedure to determine the enthalpy (and entropy) of vaporization of organic liquid compounds, by the Smith-Menzies (isoteniscope) method. The values of vapor pressure at different temperatures were obtained and ΔvH (and ΔvS) were graphically determined, using the Clausius-Clapeyron equation. The results for diethyl-ether, propanone, ethanol and n-hexane are in very good agreement with those from literature. A historical and thermodynamic discussion on equations that correlates vapor pressures and temperature precedes the experimental proposition.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Behavior of mercury in soil profiles with archaeological black earth (ABE) and surroundings area (SA) from Sítio Ilha de Terra, Caxiuanã, can provide information on anthropogenic activity of the Amazonian habitat. The samples of ABE and SA soil profiles were submitted to mineralogical chemical (total and sequential) analysis. The data show that the Hg occurs mainly in goethite and kaolinite in the two soil profiles. The highest concentrations of Hg and Fe are observed in the SA profile. These results indicate that the prehistoric human occupation contributed to the decrease of the concentration of Hg in soil ABE from Caxiuanã.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work, the volatile chromatographic profiles of roasted Arabica coffees, previously analyzed for their sensorial attributes, were explored by principal component analysis. The volatile extraction technique used was the solid phase microextraction. The correlation optimized warping algorithm was used to align the gas chromatographic profiles. Fifty four compounds were found to be related to the sensorial attributes investigated. The volatiles pyrrole, 1-methyl-pyrrole, cyclopentanone, dihydro-2-methyl-3-furanone, furfural, 2-ethyl-5-methyl-pyrazine, 2-etenyl-n-methyl-pyrazine, 5-methyl-2-propionyl-furan compounds were important for the differentiation of coffee beverage according to the flavour, cleanliness and overall quality. Two figures of merit, sensitivity and specificity (or selectivity), were used to interpret the sensory attributes studied.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Methanolic transesterification of oils and fats was carried out in a two steps procedure, under basic and acidic catalysis. Palm, soybean, canola, corn, rice, grapeseed, sunflower, peanut, pequi and olive oils, besides tallow and lard were used as feedstock. Specific gravity, relative viscosity, thin layer chromatography and gas chromatography were used to characterize the biodiesel. Biodiesel was obtained in high yield and purity. Results were used to discuss the following key-concepts: 1 - triglycerides, composition and properties; 2 - nucleophilic acyl substitution under basic and acid conditions, 3 - thin layer chromatography, 4 - gas chromatography and its quantitative methods.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Neste artigo descreve-se a construção de um calorímetro simples, utilizando materiais de fácil aquisição, para a determinação de entalpia de neutralização (pressão constante) de reações ácido-base. Foram utilizadas para o desenvolvimento do experimento soluções de ácidos e bases fortes e fracos, além de termômetro e recipiente de poliestireno expandido (isopor) para a medida e manutenção da temperatura, respectivamente. Com este experimento, foi então possível determinar a entalpia de neutralização (ΔH) de algumas reações de neutralização e compará-las com o valor mais aceito de - 55,84 kJ mol -1, a 25 ºC [1].

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Neste artigo é descrito a construção de um calorímetro simples para o desenvolvimento de um protocolo com o qual é possível determinar a entalpia de dissolução de sais. Para isto, foram utilizadas soluções de sais de carbonato de sódio, bicarbonato de sódio, sulfato de cobre e cloreto de sódio bem como termômetro e recipiente de poliestireno expandido (isopor). O experimento permite assimilar alguns conceitos sobre Termoquímica e pode ser aplicado em qualquer escola de ensino médio, visto que utiliza material de fácil aquisição e baixo custo.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

RESUMO Este artigo objetiva ser uma breve introdução à práxis soteriológica budista, enfatizando, num primeiro momento, as quatro nobres verdades (catvaryāryasatyaṇi), aquele conjunto de intuições fundamentais formuladas pelo Buda desde o seu primeiro sermão; depois se descreve o nobre óctuplo caminho (āryāṣṭāṇgikamarga), o conjunto de práticas ensinadas pelo Buda para a consecução da experiência do despertar; finalmente, descrevem-se os estágios do caminho tanto no ambiente theravādin quanto na tradição mahāyāna.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Imagens TM/Landsat 5 (bandas TM1-TM5 e TM7) de Altamira, PA, de 07.02.1991 foram transformadas em reflectância de superfície usando o modelo 6S de correção atmosférica com o objetivo de caracterizar espectralmente formações florestais secundárias. Dados biofísicos (DAP, G e H) foram coletados de 16 parcelas em campo, os quais foram utilizados no cálculo da área basal total (GT) e da rugosidade do dossel (Rug) e no estabelecimento de correlações entre os valores de reflectância de superfície dessas mesmas parcelas. Os coeficientes de correlação mais elevados foram verificados nas relações com a banda TM7. Regressões lineares foram estabelecidas tendo como variável dependente os parâmetros biofísicos e como variável independente, os valores de reflectância de superfície da banda TM7, a partir das quais foram elaborados mapas temáticos representativos da distribuição espacial dos parâmetros biofísicos. A reflectância de superfície não foi sensível a valores pequenos de dados biofísicos. Apesar disso, a metodologia aqui empregada mostrou-se eficaz para estimativas remotas de dados dendrométricos.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Os objetivos deste trabalho foram desenvolver e propor um procedimento para quantificação do volume de árvores em plantios clonais de eucalipto não desbastados. Para quantificar o volume de árvores, foram utilizados dados de 2.036 árvores de clones comerciais de eucalipto pertencentes à empresa CAF Santa Bárbara, onde foram ajustadas as equações de volume de cada estrato, sendo este determinado pela região e pelo clone, e as idades dos clones variaram de 4 a 5 anos. Para cada árvore foi ajustado um modelo de afilamento. Posteriormente, foram realizados abates de três árvores de clones novos, que não possuíam equação de volume específica, sendo uma árvore "pequena", uma "média" e uma "grande" em termos de dap e altura total. Com as três árvores cubadas, foi ajustado o modelo de afilamento, considerando-se as três árvores. De posse das estimativas dos parâmetros, foi calculada uma medida de similaridade com os parâmetros das equações de afilamento ajustadas para as 2.036 árvores dos clones comerciais e o parâmetro da equação do clone novo. A árvore do clone comercial que apresentou o menor valor de distância euclidiana, em comparação com o clone novo, foi considerada a mais similar; portanto, a equação de volume desse clone comercial foi usada para estimar o volume de árvores desse novo clone. Tal procedimento foi denominado método da similaridade de perfis. Esse método pode ser usado para estimar volume de árvores dos clones que não têm equações específicas, gerando estimativas semelhantes ao comparar dados observados e estimados, tanto de árvores individuais quanto de todo um talhão.