Simulating maize yield in sub‑tropical conditions of southern Brazil using Glam model

The objective of this work was to evaluate the feasibility of simulating maize yield in a sub‑tropical region of southern Brazil using the general large area model (Glam). A 16‑year time series of daily weather data were used. The model was adjusted and tested as an alternative for simulating maize yield at small and large spatial scales. Simulated and observed grain yields were highly correlated (r above 0.8; p<0.01) at large scales (greater than 100,000 km²), with variable and mostly lower correlations (r from 0.65 to 0.87; p<0.1) at small spatial scales (lower than 10,000 km²). Large area models can contribute to monitoring or forecasting regional patterns of variability in maize production in the region, providing a basis for agricultural decision making, and Glam‑Maize is one of the alternatives.

Yield and mineral nutrition of soybean, maize, and Congo signal grass as affected by limestone and slag

The objective of this work was to evaluate the efficiency of superficial application of limestone and slag, and their effects on soil chemical attributes and on yield and mineral nutrition of soybean, maize, and Congo signal grass (Urochloa ruziziensis). The experiment was carried out in a Rhodic Hapludox under no tillage system. The treatments consisted of the use of limestone or slag (silicates of calcium and magnesium) to correct soil acidity, and of a control treatment without the use of soil correctives. Rates were calculated in order to raise soil base saturation up to 70%. Soybean was sown in November 2006 and maize in December 2007. Congo signal grass was sown right after the harvests of soybean and maize, and it was cropped during the off-seasons. Soil chemical attributes were evaluated at 6, 12, and 18 months after the application of the corrective materials. Slag is an efficient source for soil acidity correction, being able to raise the exchangeable base levels in the soil profile faster than lime. Both limestone and slag increase dry matter yield of Congo signal grass, and grain yield of soybean and maize. Slag is more effective in improving maize grain yield.

Cassava and corn starch in maltodextrin production

Maltodextrin was produced from cassava and corn starch by enzymatic hydrolysis with alpha-amylase. The cassava starch hydrolysis rate was higher than that of corn starches in maltodextrin production with shorter dextrose equivalent (DE). DE values do not show directly the nature of the obtained oligosaccharides. Maltodextrin produced from cassava and corn starch was analysed by high performance liquid chromatography (HPLC), and the analysis showed that maltodextrin production differs according to the source of the starch. This is important in defining the application of the maltodextrin, according to its desired function.

Effect of the radiolitic sterilization in polyethylene/starch blends

Samples of LDPE/modified starch blends 80/20 m/m before and after exposure to gamma rays were examined by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction. The effect of gamma radiation is clearly seen in the samples irradiated at a dose of 25 kGy. The main alteration in the polymeric material after exposure at the radiation range was a decrease in the mechanical properties, alterations in the chemical structure of the blend with an increase in the carbonyl and vinyl indices and the appearance of new crystalline symmetry generating a crystalline domain not existing before in the blend.

Citric acid as multifunctional agent in blowing films of starch/PBAT

Citric acid was used as a compatibilizer in the production of starch and PBAT films plasticized with glycerol and processed by blow extrusion. Films produced were characterized by WVP, mechanical properties, FT-IR-ATR and SEM. WPV ranged from 3.71 to 12.73×10-11 g m-1 s-1 Pa-1, while tensile strength and elongation at break ranged from 1.81 to 7.15 MPa and from 8.61 to 23.63%, respectively. Increasing the citric acid concentration improved WVP and slightly decreased film resistance and elongation. The films micrographs revealed a more homogeneous material with the addition of citric acid. However, the infrared spectra revealed little about cross-linking esterification reaction

Starch/poly (butylene adipate-co-terephthalate)/montmorillonite films produced by blow extrusion

This study aims to prepare biodegradable films from cassava starch, poly (butylene adipate-co-terephthalate) (PBAT), and montmorillonite (MMT) using blow-extrusion process and analyze the effects of different types and concentrations of MMT on the microstructure, physicochemical, and mechanical properties of the resulting films. The films were produced by blending 30% of PBAT with glycerol (17.5%), starch (49.0-52.5%), and four different types of montmorillonite (Cloisite® Na+, 10A, 15A, and 30B) at two different concentrations (1.75% and 3.5%). All the films prepared in this study showed an increase in the basal spacing of MMT layers. In particular, the films with 10A and 30B showed the highest increase in intercalation basal spacing, suggesting the formation of intercalated composites. The addition of nanoclays decreased the elongation of films. The addition of Cloisite® 10A resulted in films with the lowest WVP values and the highest stability to water adsorption under different RH conditions.

Genetic variation among pathogens causing "Helminthosporium" diseases of rice, maize and wheat

Twenty isolates of four fungal species, agents of "Helminthosporium" diseases in cereals, were collected from different regions: nine Bipolarisoryzae isolated from rice (Oryza sativa), seven B.sorokiniana from wheat (Triticum aestivum), two B. maydis, and two Exserohilumturcicum from maize (Zea mays). The strains were compared by PCR-RFLP and RAPD analysis. Size polymorphism among the isolates in the ITS region comprising the 5.8 S rDNA indicated genetic differences among the isolates, while a UPGMA phenogram constructed after the digestion of this region with restriction enzymes showed inter- and intra-specific polymorphism. The RAPD profiles indicated an expressive level of polymorphism among different species, compared with a low level of polymorphism among isolates of the same species. A UPGMA phenogram grouped the isolates according to the species and their host plant. RAPD profiles did not reveal polymorphism that directly correlated climatic factors with geographic source of the isolates of B. sorokiniana, and B. oryzae. Teleomorphic species revealed high similarity with their correspondent anamorphs.

Temporal progress of southern rust in maize under different environmental conditions

The progress of the severity of southern rust in maize (Zea mays) caused by Puccinia polysora was quantified in staggered plantings in different geographical areas in Brazil, from October to May, over two years (1995-1996 and 1996-1997). The logistic model, fitted to the data, better described the disease progress curves than the Gompertz model. Four components of the disease progress curves (maximum disease severity; area under the disease progress curve, AUDPC; area under the disease progress curve around the inflection point, AUDPCi; and epidemic rate) were used to compare the epidemics in different areas and at different times of planting. The AUDPC, AUDPCi, and the epidemic rate were analyzed in relation to the weather (temperature, relative humidity, hours of relative humidity >90%, and rainfall) and recorded during the trials. Disease severity reached levels greater than 30% in Piracicaba and Guaíra in the plantings between December and January. Lower values of AUDPC occurred in later plantings at both locations. The epidemic rate was positively correlated (P < 0.05) with the mean daily temperatures and negatively correlated with hours of relative humidity >90%. The AUDPC was not correlated with any weather variable. The AUDPCi was negatively related to both variables connected to humidity, but not to rain. Long periods (mostly >13 h day-1) of relative humidity >90% (that corresponded to leaf wetness) occurred in Castro. Severity of southern rust in maize has always been low in Castro, thus the negative correlations between disease and the two humidity variables.

Effect of Fusarium graminearum and infection index on germination and vigor of maize seeds

Pathogens in maize (Zea mays) seeds cause serious problems, such as the loss of their capacity to germinative. The objectives of this study were to identify the optimal period for infection of maize seeds on agar colonized by Fusarium graminearum, when incubated for 4, 8, 16 and 32 h, and to evaluate the effect of the fungus on the germination and vigor of seeds with different infection levels. After the respective incubation periods, the seeds were removed from the culture medium and submitted to the blotter test for 3 min with and without superficial disinfection with 1% solution of sodium hypochlorite. Once the optimal period for seed incubation was identified, seeds from the same sample were again placed on the colonized agar for infection. Germination and vigor tests (accelerated aging and cold test) were performed with a mixture of healthy seeds (placed on PDA medium) and inoculated seeds, resulting in seeds with 0, 20, 40, 60, 80 and 100% rates of infection. The results showed that a period of 32 h was long enough to obtain seeds infected by the pathogen. There were no significant effects of fungal infection on seed germination at any of the infection levels, probably due to the high vigor of the maize seed lot tested. Regarding vigor tests, infection levels differed significantly from the control (0% infection), but there were no significant differences among the infection levels.

Adsorption isotherm studies of Cd (II), Pb (II) and Zn (II) ions bioremediation from aqueous solution using unmodified and EDTA-modified maize cob

The need to clean-up heavy metal contaminated environment can not be over emphasized. This paper describes the adsorption isotherm studies of Cd (II), Pb (II) and Zn (II) ions from aqueous solution using unmodified and EDTA-modified maize cob. Maize cob was found to be an excellent adsorbent for the removal of these metal ions. The amount of metal ions adsorbed increased as the initial concentration increased. Also, EDTA - modification enhanced the adsorption capacity of maize cob probably due to the chelating ability of EDTA. Among the three adsorption isotherm tested, Dubinin-Radushkevich gave the best fit with R² value ranging from 0.9539 to 0.9973 and an average value of 0.9819. This is followed by Freundlich isotherm (Ave. 0.9783) and then the Langmuir isotherm (Ave. 0.7637). The sorption process was found to be a physiosorption process as seen from the apparent energy of adsorption which ranged from 2.05KJ\mol to 4.56KJ\mol. Therefore, this study demonstrates that maize cob which is an environmental pollutant could be used to adsorb heavy metals and achieve cleanliness thereby abating environmental nuisance caused by the maize cob.

Thermal behavior of corn starch granules modified by acid treatment at 30 and 50°C

Unprocessed native starches are structurally too weak and functionally too restricted for application in today's advanced food technologies. Processing is necessary to engender a range of functionality. Naturals or natives starches can be modified by using several methods physical, chemical, enzymatic or combined, according industrial purposes. In this work, native corn starch was hydrolyzed by hydrochloric acid solution and investigated by using thermoanalytical techniques (thermogravimetry - TG, differential thermal analysis - DTA and differential scanning calorimetry - DSC), as well as optical microscopy and X-ray diffractometry. After acid treatment at 30 and 50°C, a decrease of gelatinization enthalpy (ΔHgel) was verified. Optical microscopy and X-ray diffractometry allowed us to verify the granules contorn and rugosity typical of cereal starches.

Infecção mista pelo Sugarcane mosaic virus e Maize rayado fino virus provoca danos na cultura do milho no estado de São Paulo

Os dois principais vírus que infectam o milho no Brasil são o Sugarcane mosaic virus (SCMV) e o Maize rayado fino virus (MRFV), cujos principais vetores são o afídeo Rhopalosiphum maidis e a cigarrinha Dalbulus maidis, respectivamente. O MRFV é freqüentemente encontrado em infecções mistas com fitoplasmas e espiroplasmas, causando as doenças denominadas enfezamentos do milho. Em uma lavoura de milho próxima a Santo Antonio da Posse, SP, cercada por campos de cana-de-açúcar, foi encontrada alta incidência de plantas apresentando mosaico, riscas, nanismo e espigas com falhas no enchimento de grãos. Análises serológicas com anti-soros específicos detectaram a presença do SCMV e MRFV nessas plantas. A infecção pelo SCMV também foi confirmada por RT-PCR com primers específicos e análise de seqüências. Em observações de preparações contrastadas negativamente em TEM, partículas flexuosas (ca.770 nm) e isométricas (ca.30 nm) foram detectadas. Em cortes ultrafinos, inclusões citoplasmáticas, típicas de Potyviridae, foram observadas; não foi encontrada a presença de espiroplasmas nem de fitoplasmas. Esses resultados mostram que a infecção conjunta por SCMV e MRFV pode ser responsável pelos danos encontrados nessa lavoura.

Aplicação do modelo CERES-maize na análise de estratégias de irrigação para milho "safrinha" em Londrina-PR

Usando-se a capacidade do modelo CERES-maize de simular o crescimento do milho sob várias condições de ambiente e manejo, foram analisadas estratégias de irrigação para o milho "safrinha", em diferentes épocas de semeadura, em Londrina - PR. Os tratamentos simulados constituíram-se no cultivo da cultivar de milho XL-520, em 12 épocas de semeaduras, no período de janeiro a abril, adotando-se cinco critérios para aplicação de irrigação, além de um nível sem irrigação e outro de produção potencial. Para as simulações, foram utilizados os dados meteorológicos da série histórica disponível para o local, características do solo predominante da região e manejo, seguindo as recomendações técnicas regionais para o cultivo. Os resultados revelaram que a irrigação foi uma alternativa viável, pois elevou notoriamente o rendimento em todas as épocas de semeadura, variando, em média, entre 5.800 e 8.000 kg ha-1, reduzindo os riscos de estabelecimento e frustração de safra para essa cultivar. Em todos os níveis, a irrigação resultou em rendimentos mais estáveis ao longo de todo o período de análise, em relação à condição sem irrigação, exceto no primeiro decêndio de janeiro.

Simulação do rendimento e riscos climáticos para o milho safrinha em Londrina - PR, utilizando o modelo CERES-Maize

Modelos matemáticos possibilitam simular realisticamente o crescimento e o desenvolvimento fenológico de culturas sob ampla gama de condições ambientais e de manejo, a um baixo custo. O objetivo deste trabalho foi investigar os efeitos da época de semeadura no estabelecimento e rendimento do milho safrinha para Londrina - PR, mediante simulações de longo período com o modelo CERES. Os tratamentos consistiram na combinação de 12 épocas de semeadura, uma em cada decêndio, de janeiro a abril, sob dois cenários: sem limitação hídrica (produção potencial) e com limitação hídrica, considerando-se uma cultivar de ciclo precoce, XL-520, durante 24 anos. Os resultados mostraram decréscimos de rendimentos de até 38% da produtividade potencial e de 44% da produtividade sob restrição hídrica à medida que se atrasou a semeadura, devido à coincidência dos períodos críticos de desenvolvimento com condições subótimas de radiação solar, temperatura e disponibilidade hídrica. Observaram-se aumentos na duração do ciclo de 120 a 140 dias quando o milho foi semeado em janeiro e de 160 a 170 dias para semeadura em abril. O ciclo mais longo influiu na seqüência de cultivos e semeaduras após o terceiro decêndio de março, só permitindo o cultivo da cultura de verão após outubro. Também houve tendência de aumento de falhas no estabelecimento do cultivo, devido à deficiência hídrica, à medida que se atrasou a semeadura. Há risco de geadas de 4% para os cultivos semeados em final de março e 8% para os semeados em abril.