Evaluation of an indicator for water yield in a watershed of Alto Rio Grande Region, State of Minas Gerais , Brazil

The Brazilian Law stipulates that water is a limited natural resource doted of economic value, thus it is necessary to develop mechanisms for its adequate management. Actions that encourage the farmers to apply soil conservation practices with the purpose of increase water yield from springs and to promote improvement of its quality, reducing production of sediment transportation, is being encouraged by governments, even with financial compensation for owners. From these assertions, this study aims to quantify the benefits of the conservation actions of the management units and to characterize a Water Yield Indicator (WYI) to support sustainable actions in the watershed of Alto Rio Grande region, in the state of Minas Gerais (MG). To assess the impact of actions it were identified four scenarios of land use and occupation of the watershed from Marcela stream which is located in Alto Rio Grande Region. After analyzing the results, it can be stated that the scenarios simulation has demonstrated important changes in water yield and that the definition of the Water Yield Index from the junction of the erosion potential with the water storage potential, has proved effective, as it integrate quantity and quality of water.

AGRICULTURAL MACHINERY AND IMPLEMENTS DESIGN PROCESS: GUIDELINES FOR SMALL AND MID-SIZED BUSINESSES

ABSTRACT This study aims at presenting the process of machine design and agricultural implements by means of a reference model, formulated with the purpose of explaining the development activities of new products, serving as a guideline to coach human resources and to assist in formalizing the process in small and medium-sized businesses (SMB), i.e. up to 500 employees. The methodology used included the process modeling, carried out from case studies in the SMB, and the study of reference models in literature. The modeling formalism used was based on the IDEF0 standard, which identifies the dimensions required for the model detailing: input information; activities; tasks; knowledge domains; mechanisms; controls and information produced. These dimensions were organized in spreadsheets and graphs. As a result, a reference model with 27 activities and 71 tasks was obtained, distributed over four phases of the design process. The evaluation of the model was carried out by the companies participating in the case studies and by experts, who concluded that the model explains the actions needed to develop new products in SMB.

Antimicrobial resistance and R-plasmid in Salmonella spp from swine and abattoir environments

Salmonella serovars isolated from swine are of particular interest not only because of the pathogenic potential for this animal species, but also due to its relevance with regard to public health. On basis of the profile of resistance to antimicrobials, 13 Salmonella strains were selected which belonged to the serovars Muenster (7), Derby (4), Typhimurium (1), and Braenderup (1). They were isolated from healthy swine as well as from the abattoir environment in the state of Rio de Janeiro. All strains of Salmonella were subjected to bacterial conjugation, and the E. coli K12 Nal r Lac+ F standard strain was used as receptor, with the purpose to verify the ability to transfer the resistance marks. Gene transfer phenomenon was detected in seven strains, and except SalmonellaTyphimurium which transconjugated to Sm, Tc and Su, the remaining ones were characterized by transferring mark Su only. By plasmidial analysis of strains used and their respective transconjugants, 63 Kb plasmid was found, which was probably related to S. Typhimurium resistance.

Health management practices and disease prevalence in dairy sheep systems in Argentina

A cross-sectional survey of 19 dairy sheep farms in Argentina was carried out with the purpose to know farm management, health practices, and occurrence and mortality of diseases. The survey comprised 40% of all sheep milking farms in Argentina. A questionnaire was conducted by way of personal interviews with sheep owners during farm visits. The proportions of farms reporting routine vaccination for clostridial diseases, contagious ecthyma, pneumonia and mineral and vitamin parenteral administration were 63%, 47.3%, 16.6% and 42.1% respectively. Regular treatment against lice was used in 37.5% of the farms, and 89.5% o the farmers treated against gastrointestinal nematodes (GIN). The mean number of GIN drenches per farm was 2.26±1.78 annually. In 68.4% of the milking flocks the California Mastitis Test was regularly done and 55.6% of the farmer managers had sampled their flocks once a year for Brucella ovis antibodies. During the pre-mating period respectively 68.4% and 50% of farmers clinically examined their rams and ewe for general health and teeth condition. The udders of ewes were frequently inspected at the start of each milking period. The most important parasite problems noticed were GIN (reported by 57.9% of farmers), lice (57.9%) and scabies (10.5%) and the most frequent infectious diseases were ecthyma (73.7%), pneumonia and other respiratory problems (57.9%), clinical mastitis (55.6%), clostridial diseases (36.9%) and foot lameness (35.2%). Photosensitivity (47.4%) and ruminal acidosis (42.1%) were reported as other frequent toxic or metabolic disorders. Owners mentioned that the mean lifespan or milk productive time per ewe was 4.5±1.4 years. Perinatal lamb mortality was 8.5% and the total flock mortality rates, above the first 24 h of life was 6.9%. The high rates of lamb mortality during the pre-weaning (10.3%) and post-weaning (5.9%) periods indicate that this problem, as well as the most prevalent diseases, should be the subject of further studies.

Hot tool temperature analysis though infrared images

Textile manufacture occupies a prominent place in the national economy. Because of its importance researches have been made on the development of new materials, equipment and methods used in the production process. The cutting of textiles starts in the basic stage, to be followed by the process of the making of clothes and other articles. In the hot cutting of fabric, one of the variables of great importance in the control of the process is the contact temperature between the tool and the fabric. This work presents a technique for the measurement of the temperature based on the processing of infrared images. With this purpose, it was developed a system which is composed of an infrared camera, a framegrabber PC board and a software which analyses the punctual temperature in the cut area enabling the operator to achieve the necessary control of other variables involved in the process.

Diversity and structure of the tree community of a fragment of tropical secondary forest of the brazilian Atlantic Forest domain 15 and 40 years after logging

Two adjacent tracts of tropical secondary forest, situated in Itambé do Mato Dentro, south-eastern Brazil, which had been regenerating for 15 and 40 years after clearing, were compared with the purpose of detecting differences in species diversity and composition, species guild composition (regeneration, stratification and dispersion), and stand structure. Four and three 1,125 m² plots laid on the 15- and 40-year-old stands, respectively, sampled 2,430 trees with diameter at the base of the stem > 5 cm. The number of species (S = 199) was high for this forest type and significantly higher for the older stand. Tree density was significantly higher in the younger stand, particularly for smaller trees, whereas the two stands did not differ in both basal area and volume per hectare. Trees of shade-tolerant and understory species were significantly more abundant in the older stand. Though sharing a large proportion of species (49%), the two stands differed significantly in the abundance of many species. Live stumps probably contributed to the relatively quick restoration of some forest characteristics, particularly species diversity, basal area and volume.

Reference values for lung function tests: III. Carbon monoxide diffusing capacity (transfer factor)

Carbon monoxide diffusing capacity (DLCO) or transfer factor (TLCO) is a particularly useful test of the appropriateness of gas exchange across the lung alveolocapillary membrane. With the purpose of establishing predictive equations for DLCO using a non-smoking sample of the adult Brazilian population, we prospectively evaluated 100 subjects (50 males and 50 females aged 20 to 80 years), randomly selected from more than 8,000 individuals. Gender-specific linear prediction equations were developed by multiple regression analysis with single breath (SB) absolute and volume-corrected (VA) DLCO values as dependent variables. In the prediction equations, age (years) and height (cm) had opposite effects on DLCOSB (ml min-1 mmHg-1), independent of gender (-0.13 (age) + 0.32 (height) - 13.07 in males and -0.075 (age) + 0.18 (height) + 0.20 in females). On the other hand, height had a positive effect on DLCOSB but a negative one on DLCOSB/VA (P<0.01). We found that the predictive values from the most cited studies using predominantly Caucasian samples were significantly different from the actually measured values (P<0.05). Furthermore, oxygen uptake at maximal exercise (VO2max) correlated highly to DLCOSB (R = 0.71, P<0.001); this variable, however, did not maintain an independent role to explain the VO2max variability in the multiple regression analysis (P>0.05). Our results therefore provide an original frame of reference for either DLCOSB or DLCOSB/VA in Brazilian males and females aged 20 to 80 years, obtained from the standardized single-breath technique.

Sugar fractionation and pectin content during the ripening of guava cv. Pedro Sato

Guava is one of the most complete and balanced fruits in in terms of s nutritional value. Highly perishable, due to its intense metabolism during ripening, its shelf life can reach 3 to 5 days under room temperature. The firmness of the green and mature fruits is due mainly to the pectin polymers. The loss of firmness during the guava ripening is due to hydrolytic enzyme activity, which promotes intense solubilization of the cell wall pectins. Given the above, with the purpose of trying to explain the rapid firmness decrease, the centesimal composition and sugar fraction of the guava fruit were determined during ripening at room temperature. The guavas were picked at the half-mature stage and stored for 8 days at 22 ± 1 ºC and 78 ± 1% relative humidity. The analyses conducted were: centesimal composition, sugar fractionation, and infrared absorption spectrometry. The results showed that the guava sugars did not vary during ripening. The estimated pectin levels (5.7%) were higher than those mentioned in the literature (2.4%), which can better explain the role of the pectin in the fruit firmness.

Post-harvest conservation of camu–camu fruits (Myrciaria dubia (Kunth) Mc Vaugh) using different temperatures and packages

Abstract The camu-camu tree (Myrciaria dubia (Kunth) Mc Vaugh) is fruit-bearing tree belonging to the family Myrtaceae. This work was conducted with the purpose of evaluating the type of storage temperature and package which allow better conservation of the quality attributes of camu-camu. The experimental design utilized was the completely randomized with three replications in a factorial arrangement (3x3x8), constituted of three different storage temperatures (laboratory ambiente or 25 ± 2 °C, 15 °C and 20 °C), three types of packages (no package, PET and PVC) and fourteen days’ storage, the fruits being analyzed every two days. The fruits were evaluated as to fresh mass loss, pH, soluble solids contents, titrable acidity, ascorbic acid, carotenoids, anthocyanins, chlorophylls A and B and maturation index (SS/AT). According to the results obtained, the quality attributes and ascorbic acid content were conserved for longer time in the fruits stored on PVC-film covered expanded polystyrene trays at 15 °C. It follows that the best temperature for the storage of camu-camu is 15 °C and the package that best keeps its quality attributes is the PVC-film covered expanded polystyrene tray.

Para superar el estancamiento económico en México: "nudos críticos" de un proyecto nacional de desarrollo

This article is devoted to analyze changes in economic policy to be adopted by Mexico if a national development project were implemented. Starting from an evaluation of the main economic and political outcomes of Vicente’s Fox administration, the author proposes an alternative development strategy which permits Mexico to overcome economic stagnation. That strategy would be based in recovering the internal market as the dynamical focus of the economy with the purpose of satisfying basic needs of people. To be successful this strategy should to confront the "critical knots" of the Neo-liberal model: to reverse the uneven distribution of income; abandoning the fixing of restrictive monetary, fiscal and exchange rate policies; and mobilizing economic surplus by means of a profound revision of debt service schemes. It concludes that to implement a national development project it is required a political and economic strategy to dismantle neoliberalism, which is an antinational structure of power.

Elites estatais e industrialização: ensaio de comparação entre Brasil, Argentina e México (1920-1970)

The purpose of this article is to stress on the importance of the sociology of state elites to fully understand developmental processes. With that purpose in mind, we comparatively analyze the industrialization process in Argentina, Brazil and Mexico from 1920 to 1970. Our analysis shows that although Argentina was in a much better condition to initiate its industrialization process in the early thirties, it was overtaken by Brazil and Mexico already in the late fifties. The article suggests that this took place because Brazil and Mexico, among other things, had a state elite willing to take development seriously, whereas Argentina lacked it.