Potential of adjuvants to reduce drift in agricultural spraying

The reduction of pesticide spraying drift is still one of the major challenges in Brazilian agriculture. The aim of this study was to evaluate the potential of different adjuvant products, such as surfactants, drift retardants, mineral oil and vegetable oil for reducing drift in agricultural spraying. The experiment consisted of quantifying drift of sprayings of 18 adjuvants dissolved in water under controlled conditions in a wind tunnel. Tests were performed in triplicates with spraying nozzles type Teejet XR8003 VK, pressure of 200kPa and medium drops. Solutions sprayed were marked with Brilliant Blue dye at 0.6% (m v-1). The drift was collected using polyethylene strips transversally fixed along the tunnel at different distances from the nozzle and different heights from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry in order to quantify deposits. The adjuvants from chemical groups of mineral oil and drift retardant resulted in lower values of drift in comparison with surfactants and water. The results obtained in laboratory show that the selection of appropriate class and concentration of adjuvants can significantly decrease the risk of drift in agricultural spraying. However, the best results obtained in laboratory should be validated with pesticide under field conditions in the future.

Effect of working pressure at different spray nozzles on drift quantification in wind tunnel

Each year, there is an increase in pesticide consumption and in its importance of use in the large-scale agricultural production, being fundamental the knowledge of application technology to the activity success. The objective of the present study was to evaluate the influence of working pressure on the drift generated by different spray nozzles, assessed in wind tunnel. The treatments were composed of two spray nozzles AXI 110015 and AXI 11002 with pressure levels of 276 and 414 kPa. The spray solution was composed by water and NaCl at 10%. The applications were conducted at wind speed of 2.0 m s-1, being the drift collected at 5.0; 10.0 and 15.0 m away from the spray boom and at heights of 0.2; 0.4; 0.6; 0.8 e 1.0 m from the tunnel floor. To both spray nozzles, the greatest drift was collected at the smallest distance to the spray-boom and at the lowest height. The AXI 11002 nozzle gave a smaller drift relative to the AXI 110015 nozzle for the two tested pressures and for all the collection points. Regardless of the nozzle, a rise in the working pressure increases the spray drift percentage at all distances in the wind tunnel.

Swine effluent treatment using anaerobic digestion at different loading rates

The industrial swine production is characterized by generation of significant effluent amounts that require treatment. The most adopted practices by Brazilian swine farmers have been wastewater storage in lagoons and its subsequent use as a biofertilizer. Nutrient accumulation in soil and water creates the need for an effective management of these residues. The anaerobic digestion process is an important alternative and low-cost treatment for organic matter reduction. However, its efficiency is limited by the digester capacity of solid degradation, especially at low hydraulic retention times. Thus, the present study aimed to verify the behavior of an upflow anaerobic digester by increasing the organic loading rate. This was accomplished in three stages using, as a parameter, volatile solids at 0.5; 1.0 and 1.5 kgVS m-3 d-1, respectively. This digester model proved to be quite robust and effective in swine manure treatment, achieving high efficiency of volatile solid removal at all stages of the study (stage 1: 61.38%; stage 2: 55.18%; and stage 3: 43.18%). Biogas production was directly related to the increasing organic load, reaching 0.14, 0.85, and 0.86 Nm³ kgVS-1add., respectively, with no significant difference (p<0.05) of biogas methane concentration among the studied stages (73.7, 75.0, and 77.9%).

Spray adjuvant characteristics affecting agricultural spraying drift

This study defined the main adjuvant characteristics that may influence or help to understand drift formation process in the agricultural spraying. It was evaluated 33 aqueous solutions from combinations of various adjuvants and concentrations. Then, drifting was quantified by means of wind tunnel; and variables such as percentage of droplets smaller than 50 μm (V50), 100 μm (V100), diameter of mean volume (DMV), droplet diameter composing 10% of the sprayed volume (DV0.1), viscosity, density and surface tension. Assays were performed in triplicate, using Teejet XR8003 flat fan nozzles at 200 kPa (medium size droplets). Spray solutions were stained with Brilliant Blue Dye at 0.6% (m/ v). DMV, V100, viscosity cause most influence on drift hazardous. Adjuvant characteristics and respective methods of evaluation have applicability in drift risk by agricultural spray adjuvants.

KNOWLEDGE ON ADJUVANT PROPERTIES, DISPOSAL OF PESTICIDERESIDUES AND SPRAY DRIFT OCCURRENCE IN THE STATE OF MATO GROSSO

ABSTRACT This paper aimed at investigating the knowledge level of people working on pesticide spraying activities concerning spray adjuvant properties, as well as collecting information on disposal locations for residues from internal spray tank cleaning, and finally the understanding of pesticide spray drift occurrence in the state of Mato Grosso, Brazil. The information was gathered through a questionnaire answered by participants of a rural extension program in application technology located in nineteen grain and fiber producing regions of Mato Grosso state. Among the mentioned adjuvants, 49.0% belonged to the mineral oil class and 17.9% of participants did not know the functions performed by such products. In addition, 58.5% of the participants discarded residues into the field. Among the participants who answered the question about spray drift occurrence causes, 54.1% indicated problems relating to inadequate weather conditions. In conclusion, there is a lack of knowledge on adjuvant functions, besides of inappropriate residue disposal in the state of Mato Grosso. Spray drift was referred as a problem; however, most of participants were not able to discuss the causes of these losses.

Different pathways in the larval development of the crab Ucides cordatus (Decapoda, Ocypodidae) and their relation with high mortality rates by the end of massive larvicultures

One of the most limiting factors affecting the larval rearing of Ucides cordatus in the laboratory is a period of high mortality, which usually occurs late in the course of the larviculture during the metamorphosis from the zoeal to the megalopal phase. The objective of the present research was to analyze the post-embryonic development of U. cordatus on an individual basis and, in particular, to search for patterns linking disturbances in the molting process to the high larval death rates observed in massive larvicultures. A total of 50 larvae were individually reared from hatching to metamorphosis into the megalopal phase under controlled conditions, fed a combination of microalgae and rotifers. The survivorship rate was 70% until zoea V. The 35 surviving zoea V larvae followed two different pathways. Eleven underwent metamorphosis directly to megalopa, eighteen molted to zoea VI and six died as zoea V. In the last molting event, only two zoea VI larvae reached the megalopal stage, while the remaining sixteen died. In further observation under microscope, 13 of the dead zoea VI showed characteristics of the pre-molt stage and pereiopods disproportionably large in relation to the carapace. The observed pattern resembles the Molt Death Syndrome (MDS) described for other decapod species, in which larvae die in the late pre-molt phase of the molting cycle. We suggest that U. cordatus larvae develop disturbances in the molting process similar to the MDS described for other species and that these disturbances are related to a more complex pathway involving the emergence of larval stage zoea VI.

Response of weed populations to tillage, reduced herbicide and fertilizer rates in wheat (Triticum aestivum) production

Field experiments were carried out in 1999 and 2000 to investigate the effects of conventional (CT) and no-tillage (NT) systems, interacting with three herbicide dose levels and three nitrogen (N) levels on weed growth and wheat production of two varieties. There was a higher grain yield for NT system compared with CT in one year. CT weed biomass was lower than from NT weed biomass, in both varieties. No differences on wheat biomass and grain yield were observed between full and reduced herbicide rates. N fertilizer increased wheat biomass and grain yield significantly. Only N medium level had an effect upon weed biomass with respect to non-fertilized plots, while the highest fertilization rate lowered weed biomass. Conventional tillage, reduced herbicide rates and nitrogen fertilization were effective ways of limiting weed production in wheat.

Rice seedling and plant development as affected by increasing rates of penoxsulam under controlled environments

Rice is a major staple in many countries. Weed control is one of the factors limiting higher rice yield. ALS (acetolactate synthase)-inhibiting herbicides are desirable weed control herbicides because of their high efficacy, low toxicity to mammalians, and low rates used. An important herbicide characteristic is high selectivity to the crop, since it facilitates fast crop establishment and greater crop advantage over the weeds. The objectives of this work were to study the effects of increasing rates of the ALS-inhibiting herbicide penoxsulam on seed integrity and germination, and seedling and plant development of rice cv. BRS Pelota under controlled laboratory and greenhouse conditions. The results showed that penoxsulam affected rice germination and seedling and plant growth at rates above 54 g a.i. ha-1, and that penoxsulam is safe for rice seedling development at the currently recommended rates.

Glyphosate drift affects arbuscular mycorrhizal association in coffee

Mycorrhizal association promotes better survival and nutrition of colonized seedling on field, and consequently, increasing of productivity. However, the weed management can interfere on this association, due to incorrect use of glyphosate. This work has assessed the effects of glyphosate drift on the growth and nutrition of arabica coffee plants (Catuaí Vermelho - IAC 99) colonized with arbuscular mycorrhizal fungi (AMF). The experiment was conducted in 2 x 5 factorial scheme, and included inoculated and non-inoculated plants, and five glyphosate subdoses (0.0, 57.6, 115.2, 230.4, and 460.8 g ha-1 of glyphosate), in randomized blocks with five replication. The inoculation was carried during the greenhouse phase of seedlings production with a mixture of Rhizophagus clarus and Gigaspora margarita, and after to transplanting, when the plants had seven pairs of leaves, glyphosate subdoses were applied. The product caused intoxication in up to 60% of non-inoculated and 45% on inoculated plants, when the highest dose of 460.8 g a.e. ha-1 was applied. A negative effect was noted on the growth and phosphorus content of coffee plants, this effect increased depending on glyphosate subdose, but regardless of inoculation. Glyphosate drift reduces the growth and nutrition of plants colonized by species of AMF and native fungi, negatively affecting root colonization of plants treated.

Behavior of RR soybeans subjected to different formulations and rates of glyphosate in the reproductive period

Recent studies indicate that glyphosate applied in post-emergence in RR soybean can eventually cause phytotoxic effects. However, there are many questions that need to be clarified in the scientific and technical contexts, involving the issue of RR soybeans regarding the use of glyphosate. This study has assessed the impact of the application of different doses and formulations of glyphosate in the reproductive period of RR soybean (R1 stage). For that purpose, an experiment in the field was conducted in two harvests (2011/12 and 2012/13), in which a 2 x 5 factorial design was used (formulations versus doses) totaling 10 treatments. In these two experiments the variables related to agronomic performance were: phytotoxicity (7, 14, 21 and 28 days after application), plant height, number of pods per plant, yield and weight of 100 grains (end of soy cycle). The results obtained allowed characterizing phytotoxicity and damages to the height and yield in RR soybean, with increasing rates of glyphosate applied in the reproductive period.

MANAGEMENT OF MAIZE STOVER WITH UNDERDOSES RATES OF GLYPHOSATE APPLICATIONS IN NO-TILLAGE

ABSTRACTGlyphosate has significant effects on the growth and development of plants when in underdoses. This work was developed to verify the effect of the application of glyphosate in underdoses in lignin synthesis and consequently decomposition of maize stover. Two experiments were conducted; the first one in a greenhouse for underdoses adjustments and the second one in the production area. The experimental design of the first trial was completely randomized with four replications. The treatments consisted in the application of the underdoses: 0, 25, 50 and 100 g ha-1 of glyphosate. In the production area, the experimental design was a randomized block with four replications, in underdoses: 0, 12.5, 25 and 50 g ha-1. The results were submitted to analysis of variance and regression. The underdoses of 25 g a.e. ha-1in a greenhouse promoted 36% increase in productivity of stover, in addition to increasing the lignin content in 16%, with no change in the unwanted growth of maize plants. In the production area, the concentration of 12.5 g a.e. ha-1 of glyphosate reduced the lignin content and the other underdoses have not changed this feature in maize plants. None of the underdoses affected the height and biomass produced by the maize plants. The highest underdose tested promoted acceleration in the decomposition of maize stover.

GLYPHOSATE DRIFT IN EUCALYPTUS PLANTS

ABSTRACTWith the present study we aim to assess the damage caused to Eucalyptus plants exposed to glyphosate drift in different canopy portions. The drift simulation was carried out through application of 1,080 g ha-1 of glyphosate in five canopy portions (0, 25, 50, 75 and 100% of the low branches), in four areas of cultivation. Areas I and II, plants with 0.91 and 2.98 m, and height of canopy drift exposition of 0.30 and 1.0 m, respectively. In areas III and IV both cultivations were 8.15 m high, varying the height of drift exposition between 2.0 and 2.5 m, respectively. At 30 and 480 days after application (DAA), the survival rate was assessed, and at 300 and 480 DAA diameter at breast height (DBH), height, volume and their respective increment were determined. The medium annual increment (MAI) was determined at 480 DAA. Area I, in which the plants were 0.91 m high, we observed that treatment with 100% of the low branches exposed to drift led to stand reduction of the plants around 18.75 and 38.19% at 30 and 480 DAA, respectively. Areas I and II showed reduction in plant growth in height and DBH, wood volume and MAI, to the extent that there was an increase in the portion of canopy exposed to glyphosate drift. However, in areas III and IV, in which 8.15 m height plants were found, no changes were verified for the evaluated characteristics, regardless of the portion of canopy exposed to glyphosate drift.

Influence of body mass and environmental oxygen tension on the oxygen consumption rates of an enteropneust, Glossobalanus crozieri

The present study deals with a species of enteropneust, Glossobalanus crozieri, focusing on two aspects of its respiration: a) oxygen consumption and body mass, and b) the influence of environmental oxygen tension on the respiratory rate. Preliminarily, the body water content was shown to be 85% of the whole body weight. The regression coefficient of the oxygen consumption on the wet body mass (0.578) seems to agree with the view that in enteropneusts respiration is mainly cutaneous. The respiratory rate was significantly reduced at O2 tensions from 76 mmHg downwards, suggesting conformity rather than regulation

Eradication of Helicobacter pylori infection in patients with duodenal ulcer and non-ulcer dyspepsia and analysis of one-year reinfection rates

Helicobacter pylori (HP) infection is endemic worldwide. The proposed treatment is expensive and there are few reports regarding reinfection rates in Brazil. The aim of this study was to compare the eradication rates obtained with two therapeutic options and to evaluate reinfection one year after treatment. This was a prospective randomized trial with 55 patients. Thirty-nine patients had active duodenal ulcer (DU) and 16 non-ulcer dyspepsia (NUD), and all tested positive for HP. Diagnosis was based on at least two positive tests: ultrarapid urease test, histology and/or culture. Patients were randomized to two groups: group OMC treated with 40 mg omeprazole (once a day), 500 mg metronidazole and 250 mg clarithromycin (twice daily) for 7 days, or group NA treated with 300 mg nizatidine (once a day) and 1000 mg amoxicillin (twice daily) for 14 days. Those patients in whom HP was eradicated were followed up for one year to evaluate reinfection. Twenty-five patients were randomized for OMC and 30 for NA. HP eradication occurred in 20/25 patients (80%) treated with OMC and 13/30 (43%) treated with NA (P = 0.01). After reallocation because of initial treatment failure, the overall eradication rate was 44/51 patients (86%). After an average follow-up of one year, we evaluated 34 patients (23 with DU and 11 with NUD). Reinfection occurred in 3/34 patients (7.6%). We conclude that OMC is effective for HP eradication, and that NA should not be used. Reinfection occurs in 7.6% of the patients in the first year after eradication.