Germination and development of pecan cultivar seedlings by seed stratification

Abstract: The objective of this work was to evaluate the effect of seed stratification on germination rate, germination speed, and initial development of seedlings of six pecan (Carya illinoinensis) cultivars under subtropical climatic conditions in southern Brazil. For stratification, the seeds were placed in boxes with moist sand, in a cold chamber at 4°C, for 90 days. In the fourteenth week after sowing, the emergence speed index, total emergence, plant height, stem diameter, and number of leaves were evaluated. Seed stratification significantly improves the germination potential and morphological traits of the evaluated cultivars.

Addition of nitrogen had no effect on yield and quality of apples in an high density orchard carrying a dwarf rootstock

The effect of N addition on apple yield and quality may vary according to the tree vigor. Apple trees developed over vigorous rootstocks had shown no response to N application in Brazil. In this study it was evaluated the effect of N addition to the soil on yield and quality of ´Royal Gala´ apples grafted on a dwarf rootstock (M.9). The orchard was planted in 1995 (2,857 trees ha-1) on an Oxisol containing 40 g kg-1 of organic matter and pH 6.0. The experiment was carried out from 1998 up to 2005. Treatments consisted of rates of N (0, 50, 100 and 150 kg ha-1 year-1 from 1998 to 2001, and respectively 0, 100, 200 and 300 kg ha-1 afterwards), all broadcasted within the tree row in two equal splits, at bud break and after harvest, as ammonium sulfate. Addition of N to the soil had no effect on fruit yield over the six years regardless of the applied rate. Averaged across treatments and years, fruit yield was 52.3 t ha-1. Nitrogen in the leaves (average of 24 g kg-1) or in the fruits (average of 346 mg kg-1) as well as some attributes related to fruit quality (color, firmness, acidity, soluble solids, physiological disorders) were unaffected by N addition. Some plant parameters related to tree vigor, however, grew higher with the increase on N rate. Thus, it is not necessary to apply N to deep Brazilian soils containing high organic matter in order to assure good fruit quality and yield on high-density orchards carrying dwarf rootstocks probably because the N required for tree growth and fruit production is supplied from soil organic matter decay.

Agronomic and molecular traits of the 'Italia Muscat' clone in Sao Francisco River Valley

The objective of this study was to evaluate agronomic and molecular traits of the 'Italia Muscat' clone and compare it with the cv. 'Italia', providing information to support the cultivation of 'Italia Muscat' this cultivar in the São Francisco River Valley. Agronomic characteristics of both clones were evaluated for two seasons in 2004. The characteristics were phenology, bud break (%), bud fertility (%), yield (kg) mass of bunches (g), length and width of bunches (cm), mass of berries (g), length and diameter of berries (mm), TSS (ºBrix), ATT (% titratable acidity) and TSS/TTA. Molecular analysis of seven SSR markers were carried out. The clone 'Italia Muscat' showed larger berries, mass of bunches and better TSS/TA ratio than 'Italia'. The molecular analysis resulted in the same allelic profile in both clones, highlighting the need to use a larger number of microsatellite markers or other molecular technique to allow their discrimination. Based on their morpho-agronomic characteristics, 'Italia Muscat' seems to be a good table grape cultivar alternative for grape growers of São Francisco River Valley.

Estudo da biodisponibilidade de metais nos sedimentos da Lagoa da Pampulha

The presence of metals in the sediments of Pampulha Lake was investigated in order to determine the bioavailability of metals in these sediments for the cultivation of vegetables such as lettuce. The chemical analyses of metals and As were accomplished by the k0 neutron activation technique. The plans for recovering this lake foresee the removal of the deposited sediments and transport of the discarded material to a specific area after the dam. The present study suggests that this strategy of discarding sediments doesn't imply any risk for the local population, in relation to the bioavailability of metals in these sediments.

Análise de praguicidas organofosforados em água por extração em fase sólida (SPE) utilizando discos C18 e cromatografia em fase gasosa: avaliação da contaminação do reservatório de Furnas (MG-Brasil)

Solid phase extraction (SPE) in C18 disks has been optimized and validated for extraction of 5 organophosphorus (OP) pesticides in water. Extraction has been followed by separation and detection by gas chromatography/flame photometry. Excellent linearity was obtained for all compounds (r greater than 0.99), with CVs between 1.0-6.9%, recoveries between 73-95% and quantification limits between 2.5-5.0 µg L-1. Samples from Furnas dam were analyzed monthly during one year and 10% showed OP pesticide residues.

A novel method for fast enrichment and monitoring of hexavalent and trivalent chromium at the ppt level with modified silica MCM-41 and its determination by inductively coupled plasma optical emission spectrometry

Chromium(III) at the ng L-1 level was extracted using partially silylated MCM-41 modified by a tetraazamacrocyclic compound (TAMC) and determined by inductively coupled plasma optical emision spectrometry (ICP OES). The extraction time and efficiency, pH and flow rate, type and minimum amount of stripping acid, and break- through volume were investigated. The method's enrichment factor and detection limit are 300 and 45.5 pg mL-1, respectively. The maximum capacity of the 10 mg of modified silylated MCM-41 was found to be 400.5±4.7 µg for Cr(III). The method was applied to the determination of Cr(III) and Cr(VI) in the wastewater of the chromium electroplating industry and in environmental and biological samples (black tea, hot and black pepper).

Perfil espacial e temporal de poluentes nas águas da represa municipal de São José do Rio Preto, São Paulo, Brasil

In this manuscript, seasonal and spatial trends of water collected from two sampling places in the Preto River in the Turvo-Grande watershed were evaluated. Water samples were collected during June/07 to July/08 and parameters sulphate, total organic carbon, ammonia, conductivity, dissolved oxygen, temperature, dissolved total solids and nitrate were quantified. Seasonal trend indicated sanitary effluents as a point source of contamination in both sampling points. Vertical trends demonstrated that the Municipal Dam was not stratified and received a diffuse source of pollutants from flooding and agriculture runoffs. It was also verified that there is relatively fast ammonia consumption kinetics having a half-life time of 1.43 h which can explain the low ammonia concentrations found in these aquatic bodies.

Citric acid as multifunctional agent in blowing films of starch/PBAT

Citric acid was used as a compatibilizer in the production of starch and PBAT films plasticized with glycerol and processed by blow extrusion. Films produced were characterized by WVP, mechanical properties, FT-IR-ATR and SEM. WPV ranged from 3.71 to 12.73×10-11 g m-1 s-1 Pa-1, while tensile strength and elongation at break ranged from 1.81 to 7.15 MPa and from 8.61 to 23.63%, respectively. Increasing the citric acid concentration improved WVP and slightly decreased film resistance and elongation. The films micrographs revealed a more homogeneous material with the addition of citric acid. However, the infrared spectra revealed little about cross-linking esterification reaction

APLICAÇÃO DE ÓXIDOS DE FERRO NANOESTRUTURADOS COMO ADSORVENTES E FOTOCATALISADORES NA REMOÇÃO DE POLUENTES DE ÁGUAS RESIDUAIS

New techniques for treating wastewater, particularly the removal or degradation of organic pollutants and heavy metals, among other pollutants, have been extensively studied. The use of nanostructured iron oxides as adsorbent and photocatalyst for the removal of these contaminants has proved a promising approach, not only because of their high treatment efficiency, but also for their cost-effectiveness, having the flexibility for in situ and ex situ applications. In this review, we briefly introduced the most used kinds of iron oxide nanoparticles, some synthesis techniques for iron oxide nanostructure formation, their potential benefits in environmental clean-up, and their recent advances and applications in wastewater treatment. These advances range from the direct applications of synthesized nanoparticles as adsorbents for removing toxic contaminants or as catalysts to oxidize and break down noxious contaminants (including bacteria and viruses) in wastewater, to integrating nanoparticles into conventional treatment technologies, such as composite photocatalytic filters (membranes, sand and ceramic) that combine separation technology with photocatalytic activity. Finally, the impact of nanoparticles on the environment and human health is briefly discussed.

BIOSSENSOR ELETROQUÍMICO BASEADO NA ENZIMA TIROSINASE PARA A DETERMINAÇÃO DE FENOL EM EFLUENTES

AbstractThis work describes the development of a biosensor based on the tyrosinase enzyme (Tyr) for the determination of phenol (PHEN) in laboratory effluent samples derived from ammoniacal nitrogen analysis of the water samples from the Muquém dam in the city of Cariús, CE, using square-wave voltammetry (SWV). The electrode modification consisted of the immobilization of gold nanoparticles, multi-walled carbon nanotubes, cobalt phthalocyanine, and Tyr on a glassy carbon electrode. The electrolyte, pH, enzyme quantity, and voltammetric parameters were optimized to detect PHEN. The analytical curves presented a linear range from 4.97 × 10-6 mol L-1 to 6.10 × 10-5 mol L-1, and the detection limit (DL) and quantitation limit (QL) values were 4.81 × 10-6 mol L-1 and 4.97 × 10-6mol L-1, respectively. The repetition of measurements with the same biosensor and repetition for three other prepared biosensors exhibited a relative standard deviation (RSD) of 5.50 and 1.75%, respectively. The percentage recovery of PHEN in effluent samples varied from 86.40 to 105.04%. The stability of the biosensor was evaluated (at 21 days) with satisfactory results, showing 97.86% of the initial response. Moreover, the DL and recovery percentages agreed with the established values from CONAMA and ABNT, respectively. Thus, the electrode configuration developed seems a promising tool in the detection and quantification of PHEN in complex samples.

Associação de adjuvantes à picoxistrobina + ciproconazol no controle da ferrugem asiática da soja

O principal problema fitossanitário da soja no Brasil é a ferrugem asiática. O uso de fungicidas é uma medida eficiente no controle da doença. Substâncias adicionadas à calda, como os adjuvantes podem influenciar a eficácia do fungicida. Testou-se nas safras 2008/09 e 2009/10 o efeito de seis adjuvantes (Assist®, Aureo®, Break ThruÒ, Joint®, Natur'l Oil® e Silwet®) adicionados a picoxistrobina + ciproconazol, além da testemunha (sem fungicida) e da testemunha padrão (Nimbus®), totalizando oito tratamentos. Para avaliação da doença, foram coletados folíolos nos terços superior, médio e inferior da cultura, observando número de lesões e urédias por folíolo nas três linhas centrais de cada parcela e incidência da doença. Na safra 2009/10, durante a segunda aplicação, foram utilizados papeis hidrossensíveis, avaliando-se o diâmetro da mediana volumétrica (DMV), o diâmetro da mediana numérica (DMN), o coeficiente de variação de gotas (CV), a densidade de gotas, o volume recuperado (L ha-1) e a área coberta pela calda fungicida (%). Nas duas safras não houve efeito dos adjuvantes testados sobre a eficiência de controle da doença quando comparados à testemunha padrão (fungicida + Nimbus®), podendo ser usados como alternativa. Na safra 2009/10 o adjuvante Aureo proporcionou menores valores de DMN, DMV, CV, volume recuperado e área coberta, enquanto que os tratamentos com maiores valores foram Assist, Joint, Nimbus e Silwet. Não foram observados sintomas de fitotoxidade associados à adição dos adjuvantes testados.

Comparação de diferentes metodologias para estimativa de curvas intensidade-duração-freqüência para Pelotas - RS

Nos projetos agrícolas de obras hidráulicas, onde não se dispõe de dados observados de vazão, é necessário explorar ao máximo as informações relativas às curvas Intensidade-Duração-Freqüência (IDF). Diante disso, é preciso obter maneira de desenvolver metodologias de estimativas de curvas IDF, em locais que possuam pouco ou nenhum dado pluviográfico. O objetivo do trabalho foi comparar as metodologias de desagregação de precipitações diárias para verificar o ganho de informação em termos de curvas IDF, comparadas àquela obtida a partir de dados observados (histórica). Os métodos utilizados foram: (a) Método das Relações (CETESB, 1979); (b) BELTRAME et al. (1991); (c) ROBAINA & PEITER (1992); (d) Modelo Bartlett-Lewis do Pulso Retangular Modificado (DAMÉ, 2001). Utilizou-se de série de dados de precipitação diária de Pelotas - RS, referente ao período de 1982-1998. Para estimar as curvas IDF, a partir dos registros históricos, foram estabelecidas as durações de 15; 30; 60; 360; 720 e 1.440 minutos, e os períodos de retorno de 2; 5 e 10 anos. Os valores de intensidades máximas foram comparados entre si, pelo teste "t" de Student, para os coeficientes linear e angular, e pelo Erro Relativo Médio Quadrático. O método que melhor representou as intensidades máximas de precipitação, nos períodos de retorno de 2 e 10 anos, foi o Método das Relações (CETESB, 1979).

Intensity-duration-frequency ratios obtained from annual records and partial duration records in the locality of Pelotas - RS, Brazil

The intensity-duration-frequency occurrence ratio (IDF) is a tool commonly used for precipitation-runoff data transformation, which is established from observations of intense precipitations over a period sufficiently long as to allow the occurrence of extremes at the observation site. This study focused on verifying the existence or absence of new data, in terms of IDF ratio, by using partial duration records produced from data on maximum daily disaggregated rainfall for pre determined durations. The partial duration records considered a base value of 55 mm, totaling 279 values. After the rainfall series were established, their independence and seasonality were assessed. Using the Student's t-test statistics, it was established that no new data, as IDF ratio, emerged from the analysis of the partial duration series with the recommended base value of precipitation, as compared to the historical records.

Monotonic trend and change points in southern Brazil precipitation

Scientific evidence on climate changes at global level has gained increasing interest in the scientific community in general. The impacts of climate change as well as anthropogenic actions may cause errors in hydro-agricultural projects existent in the watershed under study. This study aimed to identify the presence or absence of trend in total annual precipitation series of the watershed of the Mirim Lagoon, state of Rio Grande do Sul-RS / Brazil / Uruguay (Brazilian side) as well as to detect the period in which they occurred. For that, it was analyzed the precipitation data belonging to 14 weather stations. To detect the existence of monotonic trend and change points, it was used the nonparametric tests of Mann-Kendall and Mann-Whitney, the "t" test of Student for two samples of unpaired data (parametric), as well as the technique of progressive mean. The Weather Station 3152014 (Pelotas) presented changes in the trend in the series of annual precipitation in the period from 1953 to 2007. The methodologies that use subdivided series were more efficient in detecting change in trend when compared with the Mann-Kendall test, which uses the complete series (from 1921 to 2007).

Mechanical properties of castor beans subject to different drying temperatures aiming to disrupt the bean coat

In castor oil extraction process, the bean coat is abrasive to the equipment and releases substances that modify the oil color, reducing its quality. A potential solution would be to run the extraction by compressing only the endosperm. Due to lack of information, the objective of this study was to evaluate the influence of forced air drying at 40, 60, 80 and 100 ºC and farmyard drying, in the mechanical properties of the beans, aiming to break the bean coat. Castor beans were subjected to compression tests, in two perpendicular directions, at a strain rate of 0.6 mm.s-1. Average values of force, deformation energy, strain, all at rupture, and stiffness were used to evaluate the effects of dehydration. It was observed that the heat treatments did not alter the mechanical properties of castor beans, the strain and stiffness values discriminate the differences between the directions and had the lowest coefficients of variation. It was concluded that forced air drying, more costly than farmyard drying, does not bring benefits to the decortication. However, regardless the heat treatment used, the mechanical stress lengthwise is the most suitable to promote decortication.