91 resultados para Cu(II) complexes.


Relevância:

80.00% 80.00%

Publicador:

Resumo:

The DGT technique allows one to measure quantitatively free and labile metal species in aquatic systems. Nevertheless, for this approach, knowledge is required of the diffusion coefficients of the analytes in a diffusive layer. In this study, the diffusion coefficients of Hg(II), As(III), Mn(II), Mg(II), Cu(II), Cd(II) were determined in agarose gel and those of Ba(II), Cd(II), Cu(II), Mg(II), Mn(II) e Zn(II) in cellulose acetate membranes. These materials presented good performance and the reported results can be used as a data base for further DGT studies.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A new solid phase extraction (SPE) method has been developed for the selective separation and preconcentration of Cu (II) ions in food and water samples prior to its flame atomic absorption spectrometry determination. The method is based on the adsorption of the Cu(II) - 2-{[4-Amino-3-(4-methylphenyl-5-oxo-4,5-dihydro-1H-1,2,4-triazol-1-yl]acetyl}-N-phenyl hydrazinecarbothioamide complex on Amberlite XAD-8 resin. The metal complex retained on the resin was eluted with 7.5 mL of 2.0 mol L-1 HCl in acetone. The optimum conditions for the SPE of Cu(II) ions were investigated, and the method was subsequently applied to sea water, stream water, rice, tea, and tobacco samples for the determination of Cu(II) levels.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The aim of this study was to produce membranes using the adapted cuprammonium method. The cellulose utilized was obtained from recycled agroindustrial residues: sugarcane bagasse, corn stover and soybean hulls. The levels of Cu (II) ions in regenerated cellulose membranes produced with cellulose from bagasse, corn stover and soybean hulls were 0.0236 wt%, 0.0255 wt% and 0.0268 wt%, respectively. These levels were approximately 15 times lower than those observed in previous studies (0.3634 wt%). Cellular viability data show that membranes produced from bagasse cellulose do not present toxicity to the cellular cultures studied. These results demonstrate an evolution in production of regenerated cellulose membranes from agroindustrial residues mainly due to a decrease in the Cu (II) ions level, showing the possibility of application of these systems with improved membranes processing.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Os autores estudaram o comportamento cromatográfico de preparações farmacêuticas comerciais contendo o íon Fe (II). Utilizando celulose microcristalina/Propanol: ácido clorídrico 4 N: ácido acético concentrado: ácido nítrico concentrado: clorofórmio (40: 5: 5: 10: 10), como sistema cromatográfico e alizarina como reagente de detecção, Fe (II), Mn (II), Mg (II), Cu (II), Zn (II) e Ca (II) foram separados e identificados pela Cromatografia Planar. O Fe (II) foi determinado pela reação com a ortofenantrolina, resultando em solução adequada para quantificação colorimétrica.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The performance of a carbon paste electrode (CPE) modified with SBA-15 nanostructured silica organofunctionalised with 2-benzothiazolethiol for determination of Cu(II) ions in sugar cane spirit (cachaça) is described, based on differential pulse anodic stripping voltammetry (DPASV) procedure. The Cu(II) oxidation peak was observed at 0.03 V (vs. SCE) in phosphate solution (pH 3.0). The results were obtained using optimised conditions such as 100 mV pulse amplitude, 3 min accumulation time, 25 mV s-1 scan rate in phosphate solution pH 3.0, resulting in a linear dynamic range from 8.0 x 10-7 to 1.0 x 10-5 mol L-1 Cu(II) and a limit of detection 2.0 x10-7 mol L-1. Cu(II) spiked in a cachaça sample was determined with 102.5 % mean recovery at mmol L-1 level. Interference from other metallic cations present in the sample was avoided by the standard addition procedure.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A novel heteronuclear 3d-4f compound having formula NdCu3L3·13H2O (where H3L = Schiff base derived from 5-bromosalicylaldehyde and glycylglycine and L³ = C11H8 N2O4Br) was obtained. It was characterized by elemental and thermal analyses and magnetic measurements. The Cu(II)-Nd(III) compound is stable up to 323 K. During dehydration process the water molecules are lost in two stages. The magnetic susceptibility data for this complex change with temperature according to the Curie-Weiss law with theta = -35 K. The magnetic moment values decrease from 5.00µB at 303 K to 4.38µB at 76 K.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A new Cu(II) trimers, [Cu3(dcp)2(H2O)8]. 4DMF, with the ligand 3,5-pyrazoledicarboxylic acid monohydrate (H3dcp) has been prepared by solvent method. Its solid-state structure has been characterized by elemental analysis, thermal analysis (TGA and DSC), and single crystal X-ray diffraction. X-ray crystallographic studies reveal that this complex has extended 1-D,2-D and 3-D supramolecular architectures directed by weak interactions (hydrogen bond and aromatic π-π stacking interaction) leading to a sandwich solid-state structure.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Argilas constituem uma classe de complexos micro-heterogêneos e podem ser utilizados como substrato para adsorção. O seu comportamento de sorção em fase sólida intensificada pela presença de surfactantes, argilas organofílicas, é um importante fenômeno explorado pela tecnologia ambiental para a remoção de compostos orgânicos policíclicos (hidrocarbonetos aromáticos policíclicos, HPA) da água, introduzidos no ambiente por fontes antropogênicas. Este trabalho tem por objetivo estudar o comportamento fotofísico do antraceno, como modelo de HPA, em sistemas micro-heterogêneos argila-surfactantes-íons metálicos (M(II)= Cd(II), Cu(II), Hg(II), Ni(II) e Pb(II); surfactantes: CTACl; SDS; TR-X100). Os estudos foram conduzidos pelo monitoramento na mudança das propriedades de fluorescência estática e na supressão da emissão do antraceno utilizado como sonda fluorescente. Como supressores foram utilizados os cátions metálicos: Cd(II), Cu(II), Hg(II), Ni(II) e Pb(II). O perfil do espectro de fluorescência e os resultados dos ensaios de supressão da fluorescência da sonda permitiram inferir na localização do sítio de solubilização do antraceno nos sistemas micro-heterogêneos estudados e na conseqüente organização dos mesmos.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Thermal stability and thermal decomposition of succinic acid, sodium succinate and its compounds with Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and Zn(II) were investigated employing simultaneous thermogravimetry and differential thermal analysis (TG-DTA) in nitrogen and carbon dioxide atmospheres and TG-FTIR in nitrogen atmosphere. On heating, in both atmospheres the succinic acid melt and evaporate, while for the sodium succinate the thermal decomposition occurs with the formation of sodium carbonate. For the transition metal succinates the final residue up to 1180 ºC in N2 atmosphere was a mixture of metal and metal oxide in no simple stoichiometric relation, except for Zn compound, where the residue was a small quantity of carbonaceous residue. For the CO2 atmosphere the final residue up to 980 ºC was: MnO, Fe3O4, CoO, ZnO and mixtures of Ni, NiO and Cu, Cu2O.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Most drugs function by binding reversibly to specific biological targets, and therapeutic effects generally require saturation of these targets. One means of decreasing required drug concentrations is incorporation of reactive metal centers that elicit irreversible modification of targets. A common approach has been the design of artificial proteases/nucleases containing metal centers capable of hydrolyzing targeted proteins or nucleic acids. However, these hydrolytic catalysts typically provide relatively low rate constants for target inactivation. Recently, various catalysts were synthesized that use oxidative mechanisms to selectively cleave/inactivate therapeutic targets, including HIV RRE RNA or angiotensin converting enzyme (ACE). These oxidative mechanisms, which typically involve reactive oxygen species (ROS), provide access to comparatively high rate constants for target inactivation. Target-binding affinity, co-reactant selectivity, reduction potential, coordination unsaturation, ROS products (metal-associated vsmetal-dissociated; hydroxyl vs superoxide), and multiple-turnover redox chemistry were studied for each catalyst, and these parameters were related to the efficiency, selectivity, and mechanism(s) of inactivation/cleavage of the corresponding target for each catalyst. Important factors for future oxidative catalyst development are 1) positioning of catalyst reduction potential and redox reactivity to match the physiological environment of use, 2) maintenance of catalyst stability by use of chelates with either high denticity or other means of stabilization, such as the square planar geometric stabilization of Ni- and Cu-ATCUN complexes, 3) optimal rate of inactivation of targets relative to the rate of generation of diffusible ROS, 4) targeting and linker domains that afford better control of catalyst orientation, and 5) general bio-availability and drug delivery requirements.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The three organometallic complexes [(Cis-PtII (DDH) (2,5-Dihidroxibenzensulfonic)2, RhI (CO)2 Cl(2-Aminobenzothiazole) and RhI (CO)2 Cl(5-Cl-2-Methilbenzothiazole)] used in this study had been previously found to have a high in vitro activity against promastigote and amastigote like forms of Leishmania donovani. Here, the cytotoxic effect of these new organometallic complexes on the J-774 macrophages were studied. Only the RhI(CO)2 Cl (2-Aminobenzothiazole) complex induced substantial toxicity in the cells. Also, we assayed the effect of this complex on the parasite's biosynthesis of macromolecules. The RhI(CO)2Cl (5-Cl-2-Methylbenzothiazole) complex inhibited DNA, RNA, and protein synthesis. On the other hand, the two other compounds tested did not inhibit the incorporation of radioactive precursors. Finally important ultrastructural alterations in the parasites treated with the two non-cytotoxic complexes were observed.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This work reports the in vitro activity against Plasmodium falciparumblood forms (W2 clone, chloroquine-resistant) of tamoxifen-based compounds and their ferrocenyl (ferrocifens) and ruthenocenyl (ruthenocifens) derivatives, as well as their cytotoxicity against HepG2 human hepatoma cells. Surprisingly with these series, results indicate that the biological activity of ruthenocifens is better than that of ferrocifens and other tamoxifen-like compounds. The synthesis of a new metal-based compound is also described. It was shown, for the first time, that ruthenocifens are good antiplasmodial prototypes. Further studies will be conducted aiming at a better understanding of their mechanism of action and at obtaining new compounds with better therapeutic profile.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

OBJETIVO: Comparar resultados imediatos e após 12 meses de seguimento entre valvoplastia por balão e comissurotomia na estenose mitral. MÉTODOS: Oitenta e oito portadores de estenose mitral sintomáticos com anatomia favorável foram randomizados nos dois grupos. Todos os pacientes submeteram-se a avaliação clínica e Doppler ecocardiográfica antes, imediatamente após e 12 meses depois do procedimento. RESULTADOS: Gradiente médio mitral (mmHg) diminuiu (p<0,001) de 12,18±5,84 para 5,80±2,66 no grupo comissurotomia (GC) e de 11,66±6,13 para 4,98±2,40 (p<0,001) no grupo valvuloplastia (GV). Área valvar mitral (cm²) aumentou de 0,98±0,21 para 2,52±0,46 no GC e de 1,05±0,25 para 2,18±0,40 no GV (p<0,001). Em ambos os grupos ocorreu uma diminuição discreta na área valvar mitral ao final do acompanhamento. Não ocorreram óbitos. Um paciente do GV apresentou insuficiência mitral significativa e necessitou tratamento cirúrgico. Aos 12 meses de acompanhamento todos os pacientes do GC e 97,7% dos pacientes do GV estavam em classe funcional I ou II (NYHA). CONCLUSÃO: Os procedimentos foram seguros e mostraram melhora semelhante no gradiente mitral e classe funcional. A área valvar mitral aumentou expressivamente mais no GC, e apresentou, também, uma redução mais significativa após 12 meses. A maioria dos pacientes não alterou a classe funcional no acompanhamento.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

No sentido de se obter o quadro sintomatológico da carência dos micronutrientes, assim como dados analíticos, cultivou-se em solução nutritiva purificada plantas de algodão da variedade I. A. C. 11. Foi obtido o quadro sintomatológico das carências de B, Cu, Fe, Mn, Mo e Zn. A análise química das folhas novas afetadas pelas carências apresentou os seguintes valores (ppm): B=33; Cu=4,8; Fe=238; Mn=8,7; Mo = 0,12: Zn=25,2.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

No presente trabalho, os autores apresentam os resultados de um ensaio de campo empregando os cultivares Agroceres 256, Agroceres 504, Centralmex, H-7974 e Piranao no sentido de aquilatar diferenças na acumulação e exportação de micronutrientes. O ensaio foi conduzido num regossol de fertilidade mediana, exceto em relação ao K que é baixo, situado no município de Piracicaba, SP. O delineamento experimental utilizado foi de blocos ao acaso com 4 repetições. Foram seguidas as práticas culturais comuns e a adubação constituiu de 83 g da fórmula 30--120-70 por metro linear por ocasião do plantio e 33 g por metro linear da fórmula 50-0-4, em cobertura 22 dias após a germinação. Plantas foram coletadas a partir dos 20 dias após a germinação, em intervalos de 20 dias até os 120 dias. As plantas foram divididas em "colmo + folhas", pendão e espiga e analisadas para B, Cu, Fe, Mn e Zn. Concluíram os autores que diferenças na acumulação de micronutrientes manifestam-se antes da fase de crescimento intenso. Os cultivares atingem o máximo da quantidade dos nutrientes nas seguintes épocas, em dias:Cu (61-85); Fe (71-76); Mn (82-94); Zn (87-108). Verificaram, ainda, que as quantidades máximas extraídas em mg/planta são:Cu (2,06--3,49); Fe (26,66-36,28); Mn (9,92-14,39); Zn (5,88-6,69). Finalmente a exportação de nutrientes nas espigas por hectare (50.000 plantas) colhidas é: Cu (26-35 g); Fe (200-220 g); Mn (90-140 g) e Zn (160-250 g).