Computational modeling for irrigated agriculture planning. Part II: risk analysis

Techniques of evaluation of risks coming from inherent uncertainties to the agricultural activity should accompany planning studies. The risk analysis should be carried out by risk simulation using techniques as the Monte Carlo method. This study was carried out to develop a computer program so-called P-RISCO for the application of risky simulations on linear programming models, to apply to a case study, as well to test the results comparatively to the @RISK program. In the risk analysis it was observed that the average of the output variable total net present value, U, was considerably lower than the maximum U value obtained from the linear programming model. It was also verified that the enterprise will be front to expressive risk of shortage of water in the month of April, what doesn't happen for the cropping pattern obtained by the minimization of the irrigation requirement in the months of April in the four years. The scenario analysis indicated that the sale price of the passion fruit crop exercises expressive influence on the financial performance of the enterprise. In the comparative analysis it was verified the equivalence of P-RISCO and @RISK programs in the execution of the risk simulation for the considered scenario.

Broilers'toes asymmetry and walking ability assessment

Brazilian poultry production nowadays occupies important position in world's economy due to its technological advancement, which associated to the development of genetic strains of high growth may cause deviation in the growth rate and harm production. Morphological asymmetry has been pointed as an indicator of welfare, as maintained the pattern that leads to balance, the broiler chicken would have its normal locomotion characteristics, freely reaching water and feed. Thus, the objective of this research was to verify the possibility of using morphological asymmetry for evaluating walking ability of broiler chicken. The research was done in the Technology Center, at UNICAMP. The experiment was made using biomechanics analysis and following, the toes were measured. Results found did not show asymmetry useful for determining the locomotion ability of broiler chicken. New studies are recommended in order to search for other correlations that might help to estimate at field level, the locomotion difficulties of broiler chicken.

Yield and quality of elephant grass biomass produced in the cerrados region for bioenergy

The objective of this study was to evaluate the performance of two genotypes of elephant grass, fertilized with and without N, for biomass production for energy use under the edaphoclimatic conditions of the Cerrado. The genotypes Roxo and Paraíso, grown in a field experiment in a Latosol in the Cerrado region were evaluated for biomass yield, nitrogen accumulation, C:N and stem:leaf ratios, fibre, ash and P and K contents and calorific value. The accumulated dry biomass ranged from 30 to 42 Mg ha-1 and showed no response to nitrogen fertilization with the lowest biomass obtained by the genotype Paraíso and the highest by Roxo. The total N accumulation followed the same pattern as for dry matter, ranging from 347 to 539 kg N ha-1. C:N and stem:leaf ratio of the biomass produced did not vary with treatments. The fibre contents were higher in genotype Paraíso and the highest levels of ash in the genotype Roxo. The K content in the biomass was higher in genotype Roxo and P did not vary between genotypes. The calorific value averaged 18 MJ kg-1 of dry matter and did not vary with the levels of N in leaves and stems of the plant. Both genotypes, independent of N fertilization, produced over 30 Mg ha-1 of biomass under Cerrado conditions.

Performance of spray nozzles in land applications with high speed

The aim of this study was to evaluate different spray nozzles for land applications in high speed on the coverage and deposit in soybean plants pulverization. It was evaluated the AXI 110 04 plane jet nozzles operated at speed of 4.17m.s-1 (control), the grey APE and the AXI 110 08 plane jets, and the TD HiSpeed 110 06 and AXI TWIN 120 06 twin jets, at speed of 9.72m.s-1. The application volume was fixed in 120L ha-1. The application efficiency was evaluated by two different methods: analysis of the coverage area using fluorescent pigment and UV light and analysis of deposits through the recovery and quantification of FD&C N°1 brilliant blue marker by spectrophotometry. Both analyses were done in samples collected from top, middle and bottom parts of the plants. The spray nozzles showed differences in coverage and deposit pattern, so in the top part, the coverage was increased with smaller drops and the deposits were increased with medium drops. In the other parts of the plants, there were no statistical differences between the treatments for both coverage and deposits. The displacement speed did not influence the application efficiency for nozzles with the same drop pattern, and the obtained spray coverage and deposits at the medium and bottom parts of the plants were less than 50% of that found at the top of the soybean plants.

Water distribuition characteristics and soil loss of LEPA Quad-Spray emitter nozzles

The objective of this study was to characterize water application rate, water application pattern width, flow rate, water distribution uniformity and soil loss caused by nozzles of the Low Energy Precision Aplication (LEPA) type Quad-Spray emitter. The study was carried out at the Hydraulic and Irrigation Laboratory of the Department of Engineering at the Federal University of Lavras, in Lavras, state of Minas Gerais - MG, Brazil. Twenty-two (22) LEPA Quad-Spray emitter nozzles were evaluated, with nozzle diameter ranging from 1.59 to 9.92 mm. The experimental design used was entirely randomized, with three replications.Increasing values of nozzle flow rate ranging from 77.44 up to 3,044 L h-1, were obtained with increasing nozzle diameter sizes. Application pattern width ranged from 0.56 up to 3.24m, according to nozzles diameter size. Low values of CDU (maximum of 35.73%) were observed when using the Quad-Spray nozzles. Observed average water application rates covered the range between 68.05 mm h-1 (the lowest value that was obtained with the 2.38mm nozzle) and 258.15 mm h-1 (the highest value that was observed with the 9.92 mm). Average water application rates increased in a simple non-linear function with the increase of nozzle size diameter. However, the weighted average increase in the amount of soil loss by erosion was not related to the increase of weighted average water application values.

Water storage in wetted strips under irrigated coffee trees with different criteria of irrigation management

The increasing demand for water resources accentuates the need to reduce water waste through a more appropriate irrigation management. In the particular case of irrigated coffee planting, which in recent years presented growth with the predominance of drip irrigation, the improvement of drip irrigation management techniques is a necessity. The proper management of drip irrigation depends on the knowledge of the spatial pattern of soil moisture distribution inside the wetted strip formed under the irrigation lines. In this study, grids of 24 tensiometers were used to determine the water storage within the wetted strip formed under drippers, with a 3.78 L h-1 discharge, evenly spaced by 0.4 m, subjected to two different management criteria (fixed irrigation interval and 60 kPa tension). Estimates of storage based on a one-dimensional analysis, that only considers depth variations, were compared with two-dimensional estimates. The results indicate that for high-frequency irrigation the one-dimensional analysis is not appropriate. However, under less frequent irrigation, the two-dimensional analysis is dispensable, being the one-dimensional sufficient for calculating the water volume stored in the wetted strip.

Powder flow criteria for design of vertical silo walls

For design of vertical silos walls involving the storage of bulk solids to be safe and reliable, it is important knowing the largest possible number of variables such as: flow properties, silo geometry and pattern of flow desired. In order to validate the theories of flow prediction and design of conical hoppers, the flow properties of two bulk solids were determined, the theories of Jenike's flowability and Enstad and Walker for hopper design were analyzed and the results were compared with those experimentally obtained in a reduced model of a semicircular-section silo. Results show that Enstad theory for the hopper design is adequate to occur mass flow inside the silo, and for the sizing of the discharge outlet, the Walker's theory was closer to the appropriate than Jenike's theory, which was higher around 100% than the experimental hopper outlet.

Data mining techniques for identification of spectrally homogeneous areas using NDVI temporal profiles of soybean crop

The aim of this study was to group temporal profiles of 10-day composites NDVI product by similarity, which was obtained by the SPOT Vegetation sensor, for municipalities with high soybean production in the state of Paraná, Brazil, in the 2005/2006 cropping season. Data mining is a valuable tool that allows extracting knowledge from a database, identifying valid, new, potentially useful and understandable patterns. Therefore, it was used the methods for clusters generation by means of the algorithms K-Means, MAXVER and DBSCAN, implemented in the WEKA software package. Clusters were created based on the average temporal profiles of NDVI of the 277 municipalities with high soybean production in the state and the best results were found with the K-Means algorithm, grouping the municipalities into six clusters, considering the period from the beginning of October until the end of March, which is equivalent to the crop vegetative cycle. Half of the generated clusters presented spectro-temporal pattern, a characteristic of soybeans and were mostly under the soybean belt in the state of Paraná, which shows good results that were obtained with the proposed methodology as for identification of homogeneous areas. These results will be useful for the creation of regional soybean "masks" to estimate the planted area for this crop.

Vocalization data mining for estimating swine stress conditions

This study aimed to identify differences in swine vocalization pattern according to animal gender and different stress conditions. A total of 150 barrow males and 150 females (Dalland® genetic strain), aged 100 days, were used in the experiment. Pigs were exposed to different stressful situations: thirst (no access to water), hunger (no access to food), and thermal stress (THI exceeding 74). For the control treatment, animals were kept under a comfort situation (animals with full access to food and water, with environmental THI lower than 70). Acoustic signals were recorded every 30 minutes, totaling six samples for each stress situation. Afterwards, the audios were analyzed by Praat® 5.1.19 software, generating a sound spectrum. For determination of stress conditions, data were processed by WEKA® 3.5 software, using the decision tree algorithm C4.5, known as J48 in the software environment, considering cross-validation with samples of 10% (10-fold cross-validation). According to the Decision Tree, the acoustic most important attribute for the classification of stress conditions was sound Intensity (root node). It was not possible to identify, using the tested attributes, the animal gender by vocal register. A decision tree was generated for recognition of situations of swine hunger, thirst, and heat stress from records of sound intensity, Pitch frequency, and Formant 1.

Spatial variability of apparent electrical conductivity and soil properties in a coffee production field

Precision agriculture based on the physical and chemical properties of soil requires dense sampling to determine the spatial variability of these properties. This dense sampling is often expensive and time-consuming. One technique used to reduce sample numbers involves defining management zones based on information collected in the field. Some researchers have demonstrated the importance of soil electrical variables in defining management zones. The objective of this study was to evaluate the relationship between the spatial variability of the apparent electrical conductivity and the soil properties in the coffee production of mountain regions. Spatial variability maps were generated using a geostatistical method. Based on the spatial variability results, a correlation analysis, using bivariate Moran's index, was done to evaluate the relationship between the apparent electrical conductivity and soil properties. The maps of potassium (K) and remaining phosphorus (P-rem) were the closest to the spatial variability pattern of the apparent electrical conductivity.

Spraying systems and traveling speed in the deposit and spectrum of droplets in cotton plant

ABSTRACT Tractor traveling speed can influence the quality of spraying depending on the application technology used. This study aimed to evaluate the droplet spectrum, the deposition and uniformity of spray distribution with different spraying systems and traveling speeds of a self-propelled sprayer in two phenological stages of the cotton plant (B9 and F13). The experimental design was randomized blocks and treatments were three spraying techniques: common flat spray tips; tilted flat jet with air induction, at 120 L ha-1; and rotary atomizer disk, 20 L ha-1, combined with four traveling speeds: 12, 15, 18 and 25 km h-1, with four replications. Spraying deposition was evaluated for both leaf surfaces from the cotton plant apex and base (stage B9) and middle part of the plant (stage F13) with a cupric marker. A laser particle analyzer also assessed the droplet spectrum. The centrifugal power spray system produces more homogeneous droplet spectrum and increased penetration of droplets into the canopy in both phenological stages. Variation on the operating conditions necessary for increased traveling speed negatively influences the pattern of spraying deposits.

Estenose arterial pós-transplante hepático: tratamento com angioplastia transluminal percutânea

Vascular complications after liver transplantation include oclusion or stenosis at the sites of anastomosis in the hepatic artery, portal vein, and vena cava. Balloon angioplasty of these stenosis carries little risk and is a useful procedure for the treatment of these problems. The purpose of this paper was to assess whether percutaneous transluminal angioplasty can help to prolong allograft survival and impruve allograft function in patient with hepatic artery stenosis after liver transplantation. We report a 43-year-old mate with stenosis of hepatic artery anastomosis after liver transplantation. An abrupt elevation of liver enzymes and serum bilirrubin levels was noted on the fifth postoperative month. The patient underwent percutaneous liver biopsy, which revealed important ductal depletion due to hypoperfusion, even though Doppler ultrasound examination demonstrated arterial flow. An angiogram confirmed severe stenosis of the arterial anastomosis with poor intraparenchymal arterial perfusion pattern. In an attempt to preserve the graft, a percutaneous transluminal angioplasty was performed using microballoons mounted on a hydrophylic micro guidewire. Intervention proceeded without complications. Liver enzimes and bilirrubin levels decreased within twenty-four hours of angioplasty. Normal levels were achieved after one week. Seven month after angioplasty, the patient is in a optimal clinical condition with no signs of graft impairment. We conclude that percutaneous transluminal angioplasty of hepatic artery stenosis after liver transplantation is relatively safe and may help decrease allograft loss.

Leiomioma perfurado do intestino delgado

A perforated jejunal leiomyoma is a rare condition; only seven cases have been described in the literature. We report a case of a 45 years old man with a perforate acute abdomen. At laparotomy, a 12 cm multilobulated firm mass, located 20 cm distal from Treitz ligament, was removed. Histological sections disclosed a jejunal leiomyoma. The benign pattern of the lesion was confirmed with no mitosis and no atypical cellurarity. Five years later, the patient is free of the disease.

Complicated diverticular disease: the changing paradigm for treatment

The term "complicated" diverticulitis is reserved for inflamed diverticular disease complicated by bleeding, abscess, peritonitis, fistula or bowel obstruction. Hemorrhage is best treated by angioembolization (interventional radiology). Treatment of infected diverticulitis has evolved enormously thanks to: 1) laparoscopic colonic resection followed or not (Hartmann's procedure) by restoration of intestinal continuity, 2) simple laparoscopic lavage (for peritonitis +/- resection). Diverticulitis (inflammation) may be treated with antibiotics alone, anti-inflammatory drugs, combined with bed rest and hygienic measures. Diverticular abscesses (Hinchey Grades I, II) may be initially treated by antibiotics alone and/or percutaneous drainage, depending on the size of the abscess. Generalized purulent peritonitis (Hinchey III) may be treated by the classic Hartmann procedure, or exteriorization of the perforation as a stoma, primary resection with or without anastomosis, with or without diversion, and last, simple laparoscopic lavage, usually even without drainage. Feculent peritonitis (Hinchey IV), a traditional indication for Hartmann's procedure, may also benefit from primary resection followed by anastomosis, with or without diversion, and even laparoscopic lavage. Acute obstruction (nearby inflammation, or adhesions, pseudotumoral formation, chronic strictures) and fistula are most often treated by resection, ideally laparoscopic. Minimal invasive therapeutic algorithms that, combined with less strict indications for radical surgery before a definite recurrence pattern is established, has definitely lead to fewer resections and/or stomas, reducing their attendant morbidity and mortality, improved post-interventional quality of life, and less costly therapeutic policies.

Alcohol and brief intervention for trauma victims

Objective:to describe the causes and severities of trauma in patients who met the criteria for alcohol abuse or dependence according to Mini International Neuropsychiatric Interview, and to display the pattern of alcohol consumption and subsequent changes one year after trauma.Methods:a transversal and longitudinal quantitative study carried out between November 2012 and September 2013 in the ED. Medical and nursing students collected blood samples, applied the J section of the Mini International Neuropsychiatric Interview (MINI) and submitted alcohol abusers and dependents to BI. One year after admission, patients were contacted and asked about their patterns of alcohol use and their reasons for any changes.Results:from a sample of 507 patients admitted to the ED for trauma, 348 responded to MINI, 90 (25.9%) being abusers and 36 (10.3%) dependent on alcohol. Among the abusers, the most frequent cause of injury was motorcycle accident (35.6%) and among the dependents it was predominantly interpersonal violence (22.2%). Positive blood samples for alcohol were identified in 31.7% of the abusers and 53.1% of the dependents. One year after trauma, 66 abusers and 31 dependents were contacted, and it was ascertained that 36.4% of the abusers and 19.4% of the dependents had decreased alcohol consumption. The main reported reason for the reduction was the experienced trauma.Conclusion:the motorcycle accident was the most common cause of injury. The detection of problematic alcohol use and implementation of BI are important strategies in the ED, however for alcohol abusers and dependents, BI was not the most reported reason for any changes in patterns of alcohol use.