REAÇÃO DE CONDENSAÇÃO DO GLICEROL COM COMPOSTOS CARBONÍLICOS. SÍNTESE, CARACTERIZAÇÃO E APLICAÇÃO EM CRISTAIS LÍQUIDOS

Condensation reactions of glycerol with aldehydes and ketones were performed under thermal heating and microwave irradiation regimes. Homogeneous and heterogeneous catalysts were tested in both conditions. A silica sulfated (SiO2-SO3H) heterogeneous catalyst demonstrated the best performance relative to a selectivity of >95% in favor of 5-membered ketals. For acetals, preference in favor of 5-membered or 6-membered functional groups depends on the nature of the catalyst. Homogenous catalysts favor the more stable 6-membered acetals, whereas heterogeneous catalysts favor the less stable 5-membered acetals. However, the isomer ratios in the acetalization reaction are too low, and hence the reaction cannot be used in a synthetic plan for functional materials. Ketalization processes mediated by SiO2-SO3H show a high selectivity in favor of a 5-membered ring (1,3-dioxolane). The scope of condensation was tested with different ketones. A mechanism for heterogeneous catalysis related to the selectivity in the cyclization process is presented herein. Solketal, a commercial product, was also obtained by a condensation reaction of glycerol and propanone, and showed a high selectivity in favor of 1,3-dioxolane. It was transformed to potential allylic and chiral intermediates. A mesogenic core was connected to the organic framework of glycerol to produce a monomer liquid crystal material with a stable smectic-C mesophase.

Epidemiologia comparativa da pinta-preta do tomateiro sob quatro regimes de pulverização

Objetivando estudar o desenvolvimento da pinta-preta (Alternaria solani) do tomateiro (Lycopersicon esculentum) sob diferentes regimes de pulverização com calda Viçosa, um ensaio foi conduzido, utilizando os seguintes tratamentos: 1) aplicação semanal; 2) aplicação com base nos sistemas de previsão TOMCAST (VSD20); 3) CUFAST; e 4) FAST. As aplicações semanais foram iniciadas na segunda semana após o transplantio enquanto as outras foram feitas com base nos respectivos modelos de previsão. As avaliações da severidade foram feitas semanalmente com o auxílio de uma escala diagramática e os dados foram submetidos ao ajustamento dos modelos de Gompertz, logístico e monomolecular, por meio de análise de regressão linear. O modelo logístico se ajustou melhor aos dados e foi utilizado para determinar as taxas de progresso da doença (r) que, juntamente com a AACPD, foram utilizadas para comparar os tratamentos. O tratamento semanal proporcionou menor taxa de progresso de doença e AACPD, sem, no entanto, diferir significativamente dos efeitos dos tratamentos baseados nos modelos TOMCAST e FAST. Comparados com o regime de pulverização semanal, os regimes baseados nestes dois modelos permitiram uma redução da severidade da pinta-preta com 40 a 60% de redução no número de aplicações de fungicida.

Efeito da temperatura e de regimes de luz no crescimento do micélio, germinação de conídios e esporulação de Stenocarpella macrospora e Stenocarpella maydis

O objetivo deste trabalho foi avaliar a influência da temperatura (5 a 45 ºC) e do regime de luz no crescimento radial do micélio, na germinação dos conídios e na esporulação (produção de cirros) de Stenocarpella macrospora e de S. maydis. Foram utilizados um isolado monospórico de cada uma das espécies de Stenocarpella obtidos na área experimental da Universidade de Passo Fundo RS, a partir de colmos de milho infectados. A faixa de temperatura entre 23 e 28 ºC proporcionou crescimento do micélio mais rápido para os dois isolados, tanto sob luz contínua como sob fotoperíodo de 12 h. Não se observou crescimento do micélio nas temperaturas de 5 a 45 ºC. Considerando o período de luz, verificou-se que o crescimento do micélio de ambas espécies foi maior no fotoperíodo de 12 h. Os conídios de S. macrospora e S. maydis não germinaram mesmo após 24 h de incubação nas temperaturas de 5 e 45 ºC, independentemente do regime de luz. As temperaturas entre 28 e 33 ºC propiciaram a maior porcentagem de germinação dos conídios de S. maydis, enquanto os conídios de S. macrospora apresentaram maior germinação na faixa de temperatura entre 26 e 29 ºC. Os conídios de ambos isolados apresentaram uma maior velocidade de germinação na presença da luz. Ambos isolados apresentaram maior esporulação em colmos de milho na faixa de temperatura entre 30 e 35 ºC e sob regime de luz contínua.

Características culturais e severidade da mancha foliar de Quambalaria eucalypti sob diferentes regimes de temperatura, luz e período de molhamento foliar

Quambalaria eucalypti foi recentemente relatado como agente etiológico da mancha foliar e do anelamento da haste de Eucalyptus spp., no Brasil. Em vista do pouco conhecimento disponível sobre este patossistema, procurou-se, neste trabalho, avaliar o crescimento micelial e a esporulação do fungo em diferentes meios de cultura, determinar "in vitro" a temperatura ótima para o crescimento micelial, esporulação e a germinação de conídios, avaliar a influência do regime de luz sobre a germinação de conídios e determinar a influência do binômio temperatura - tempo de câmara úmida sobre a severidade da doença. As temperaturas de 25, 13 e 37 ºC foram respectivamente, ótima, mínima e máxima, para o crescimento. A temperatura ótima para esporulação foi de 25 ºC. A interação entre meios de cultura e isolados foi significativa, sendo que os meios de batata-dextrose-ágar (BDA), V8-ágar (V8) e caldo de vegetais-ágar foram os mais favoráveis ao crescimento micelial, seguidos de caseína hidrolizada ágar e ágar água. Todavia, para a esporulação, a interação entre meios de cultura e isolados não foi significativa e o meio de BDA foi o mais favorável à esporulação do patógeno. A temperatura e o regime de luz não afetaram significativamente a germinação de conídios, com uma taxa média de 85 % de germinação. A interação entre temperatura e tempo de permanência em câmara úmida não foi significativa para severidade da doença. O modelo quadrático foi o que melhor representou a severidade em função da temperatura, com ponto ótimo estimado igual a 27 ºC. O modelo exponencial foi o que melhor representou a severidade em função do tempo de câmara úmida.

Thermal behaviour study of solid state compounds of manganese (II), zinc (II) and lead (II) with cinnamic acid

Compounds of cinnamic acid with manganese, zinc and lead have been prepared in aqueous solution. Thermogravimetry, derivative thermogravimetry (TG, DTG), differential scanning calorimetry (DSC), X-ray diffraction and complexometry have been used in the characterization as well as in the study of the thermal stability and interpretation concerning the thermal decomposition.

Preparation and thermal decomposition of solid state cinnamates of alkali earth metals, except beryllium and radium

Solid state compounds of general formula ML2.nH2O [where M is Mg, Ca, Sr or Ba; L is cinnamate (C6H5 -CH=CH-COO-) and n = 2, 4, 0.8, 3 respectively], have been synthetized. Thermogravimetry (TG), derivative thermogravimetry (DTG), differential scanning calorimetry (DSC) and X-ray diffraction powder patterns have been used to characterize and to study the thermal stability and thermal decomposition of these compounds.

Preparation and thermal behavior of mixture of basic carbonate and 4-dimethylaminocinnamylidenepyruvate with lanthanides (III) and yttrium (III) in the solid state

Solid Ln-OHCO3-DMCP compounds, where Ln represents lanthanides (III) and yttrium (III) ions and DMCP is the anion 4-dimethylaminocinnamylidenepyruvate, have been prepared. Thermogravimetry, derivative thermogravimetry (TG, DTG), differential scanning calorimetry (DSC), x-Ray diffraction powder patterns and elemental analysis have been used to characterize the compounds. The thermal stability as well as the thermal decomposition of these compounds were studied using an alumina crucible in an air atmosphere.

A thermal analysis study of dithizone and dithizonates of mercury, silver and bismuth

Solid dithizonates of Hg(I), Ag(I) and Bi(III) have been prepared. Thermogravimetry (TG), derivative thermogravimetry (DTG), differential scanning calorimetry (DSC), X ray diffraction powder patterns and elemental analysis have been used to characterize and to study the thermal stability and thermal decomposition of the dithizone and of these dithizonates.

Thermal behavior studies of solid state compounds of 4-dimethylaminocinnamylidenepyruvate with alkali earth metals, except beryllium and radium

Solid state compounds of general formula M(DMCP)2.nH2O, where M represents Mg, Ca, Sr, Ba, and DMCP is 4-dimethylaminocinnamylidenepyruvate, and n = 1, except for Ca, where n = 2.5, have been prepared. Thermogravimetry, derivative thermogravimetry (TG, DTG), differential scanning calorimetry (DSC), X-ray diffraction powder patterns and complexometry were used to characterize and to study the thermal decomposition of these compounds.

Thermal decomposition and stability in a series of heterobimetallic carbonyl compounds of the type [Fe(CO)4(HgX)2] (X=Cl, Br, I)

Heterobimetallic carbonyl compounds of the type [Fe(CO)4(HgX)2] (X= Cl, Br, I), which have metal-metal bonds, have been prepared in order to study their thermal stabilities as a function of the halogen coordinated to mercury atoms. The characterization of the above complexes was carried out by elemental analysis, IR and NMR spectroscopies. Their thermal behaviour has been investigated and the final product was identified by IR spectroscopy and by X-ray powder diffractogram.

Thermal behaviour studies of solid state compounds of cinnamylidenepyruvate with trivalent lanthanides and yttrium (III) in an atmosphere of CO2

Solid state cinnamylidenepyruvate of trivalent lanthanides (except for promethium) and yttrium, were prepared. Thermogravimetry, derivative thermogravimetry (TG, DTG), differential scanning calorimetry (DSC), X-ray diffraction powder patterns and complexometry were used to characterize and to study the thermal behavior of these compounds in a dynamic CO2 atmosphere. The results obtained showed significative differences on the thermal stability and thermal decomposition of these compounds, with regard to the thermal behavior study in a dynamic air atmosphere.

Synthesis, characterization and thermal behaviour of solid state compounds of 2-chlorobenzylidenepyruvate with trivalent aluminium, gallium, indium and scandium metals

Solid state compounds M-2-Cl-BP, where 2-Cl-BP is 2-chlorobenzylidenepyruvate and M represents Al, Ga, In, and Sc were prepared. X-ray powder diffractometry, infrared spectroscopy and simultaneous thermogravimetry-differential thermal analysis (TG-DTA), have been used to characterize and to study the thermal behavior of these compounds. The results provided information concerning the stoichiometry, crystallinity, thermal stability and thermal decomposition of the compounds.

Synthesis and thermal studies of solid state 2-chloro-benzylidenepyruvic acid and its compounds with sodium, aluminium (III), gallium (III) and indium (III) cations

The synthesis of sodium 2-chlorobenzylidenepyruvate and its corresponding acid as well as binary, binary together with it's acid or hydroxo-2-chorobenzylidenepyruvate of aluminium (III), gallium (III) and indium (III), were isolated. Chemical analysis, thermogravimetry, derivative thermogravimetry (TG/DTG), simultaneous thermogravimetry-differential thermal analysis (TG-DTA) and X-ray powder diffractometry have been employed to characterize and to study the thermal behaviour of these compounds. The results provided information concerning the stoichiometry, crystallinity, thermal stability and thermal decomposition.

Thermal behavior of alginic acid and its sodium salt

An evaluation of hydration and thermal decomposition of HAlg and its sodium salt is described using thermogravimetry (TG) and differential scanning calorimetry (DSC). TG curves in N2 and air, were obtained for alginic acid showed two decomposition steps attributed to loss of water and polymer decomposition respectively. The sodium alginate decomposed in three steps. The first attributed to water loss, followed by the formation of a carbonaceous residue and finally the Na2CO3. DSC curves presented peaks in agreement with the TG data. In the IR alginic acid presented bands at 1730 and 1631 cm-1, while sodium alginate presented a doublet at 1614 e 1431 cm-1, evidencing the presence of salified carboxyl groups.

Synthesis, characterization and thermal behaviour of solid state compounds of 4-methoxybenzoate with Manganese, Nickel and Copper

Solid state M-L compounds, where M stands for bivalent Mn, Ni, Cu and L is 4-methoxybenzoate, have been synthesized. Simultaneous thermogravimetry - differential thermal analysis (TG-DTA), X-ray powder diffractometry, infrared spectroscopy, elemental analysis and complexometry were used to characterize and to study the thermal behaviour of these compounds. The results led to information about the composition, dehydration, thermal stability and thermal decomposition of the isolated compounds.