Bleached kraft pulp production from Pinus tecunumanii (Eguiluz e Perry)

The use of 12-year-old Pinus tecunumanii (Eguiluz e Perry) grown in Colombia was evaluated for bleached kraft pulp production. Kraft pulps of kappa number 30 ± 1 were produced, and oxygen delignified and bleached to 90% ISO with ECF processes. The bleached pulps produced under optimum conditions were evaluated with regard to their strength properties. Pinus tecunumanii wood required low effective alkali charge to reach the desired kappa number and the unbleached pulp showed high oxygen delignification efficiency and bleachability when a OD(EO)DED sequence was used. The bleached pulps presented good physical-mechanical properties, which are comparable to those obtained with more traditional pines such as Pinus taeda and Pinus radiata. The results demonstrate that this tropical pine species is a suitable raw material for bleached kraft pulp production

The effect of wood supply and bleaching process on pulp brightness stability

One hundred different 5.5-year-old Eucalyptus grandis x Eucalyptus urophylla wood clones were cooked to kappa number 15-17.5 and the resulting kraft pulps oxygen-delignified to kappa 9.5-11.5 under fixed conditions, except for chemical charges. Thirteen samples showing large variations in effective alkali requirement, pulp yield and O-stage efficiency and selectivity were selected for brightness reversion studies. These samples were bleached to 90-91% ISO by DEDD and DEDP sequences and their brightness stability and chemical characteristics determined. Heat reversion of the eucalyptus kraft pulps was strongly influenced by the wood supply, with brightness loss varying in the range of 2.1-3.6 and 0.8-1.7 %ISO for ODEDD and ODEDP bleached pulps, respectively. Pulps bleached by the ODEDP sequence showed reversion values 1.3-1.9 % ISO lower than those bleached by the ODEDD sequence. Pulp carbonyl content decreased by 35-40% during the final peroxide bleaching stage. Carbonyl and carboxyl groups correlated positively with brightness reversion, as did permanganate number and acid soluble lignin. Pulp final viscosity and metal and DCM extractives contents showed no significant correlation with brightness reversion. Pulping, oxygen delignification and ECF bleaching performances also showed no correlation with brightness reversion.

Chemical characteristics and Kraft pulping of tension wood from Eucalyptus globulus labill

Tension (TW) and opposite wood (OW) of Eucalyptus globulus trees were analyzed for its chemical characteristics and Kraft pulp production. Lignin content was 16% lower and contained 32% more syringyl units in TW than in OW. The increase in syringyl units favoured the formation of β-O-4 bonds that was also higher in TW than in OW (84% vs. 64%, respectively). The effect of these wood features was evaluated in the production of Kraft pulps from both types of wood. At kappa number 16, Kraft pulps obtained from TW demanded less active alkali in delignification and presented slightly higher or similar pulp yield than pulps made with OW. Fiber length, coarseness and intrinsic viscosity were also higher in tension than in opposite pulps. When pulps where refined to 30°SR, TW pulps needed 18% more revolutions in the PFI mill to achieve the same beating degree than OW pulps. Strength properties (tensile, tear and burst indexes) were slightly higher or similar in tension as compared with opposite wood pulps. After an OD0(EO)D1 bleaching sequence, both pulps achieved up to 89% ISO brightness. Bleached pulps from TW presented higher viscosity and low amount of hexenuronic acids than pulps from OW. Results showed that TW presented high xylans and low lignin content that caused a decrease in alkali consumption, increase pulp strength properties and similar bleaching performance as compared with pulps from OW.

Química e colorimetria da madeira de Eucalyptus grandis W. Mill ex Maiden termorretificada

A termorretificação visa melhorar as características para agregar valor à madeira através da aplicação de calor. O objetivo foi avaliar as alterações químicas e colorimétricas da madeira termorretificada de Eucalyptus grandis submetida a 170, 200 e 230 ºC por 3, 5 e 7 h. Os teores de extrativos, lignina, holocelulose, composição elementar e os parâmetros colorimétricos foram determinados. Os teores de extrativos aumentaram nos tratamentos a 170 °C e diminuíram a partir de 200 °C, enquanto o teor de lignina total aumentou e o de holocelulose diminuiu a partir de 200 °C. O teor de carbono aumentou e o de oxigênio diminuiu a 230 °C por 5 e 7 h. A termorretificação reduziu a claridade, matriz vermelho (a*) e matriz amarelo (b*) da madeira de eucalipto em todos os tratamentos.

EFFECTS OF HARVESTING ON LEAF PRODUCTION AND REPRODUCTIVE PERFORMANCE OF Copernicia prunifera (Mill.) H.E. Moore1

ABSTRACT This work aimed to evaluate the consequences of the monthly extraction of immature leaves in survival, leaf production and reproductive performance ofCopernicia prunifera H. E. Moore palm, popularly known as carnaúba. One hundred sixty reproductive adult palms were monitored for 17 months in four extractive communities located at the coast of the state of Piauí. As a result, it was observed that leaves, flowers, fruits and seeds production were reduced in the palm submitted to 50% or 75% monthly extraction. Higher levels of extraction were followed by smaller levels in seed germination. No deaths were observed even in the group subjected to 75% monthly leaves exploration. In order not to produce damage to palm trees development it is suggested that leaf extraction rate should not exceed 25% monthly as well as pausing of extractive activity preferentially during fruit maturation.

RELATIONSHIP BETWEEN CLIMATE VARIABLES, TRUNK GROWTH RATE AND WOOD DENSITY OF Eucalyptus grandis W. Mill ex Maiden TREES

ABSTRACT Climatic conditions stimulates the cambial activity of plants, and cause significant changes in trunk diameter growth and wood characteristics. The objective of this study was to evaluate the influence of climate variables in the diameter growth rate of the stem and the wood density of Eucalyptus grandis trees in different classes of the basal area. A total of 25 Eucalyptus trees at 22 months of age were selected according to the basal area distribution. Dendrometer bands were installed at the height of 1.30 meters (DBH) to monitor the diameter growth every 14 days, for 26 months. After measuring growth, the trees were felled and wood discs were removed at the DBH level to determine the radial density profile through x-ray microdensitometry and then re-scale the average values every 14 days. Climatic variables for the monitoring period were obtained and grouped every 14 days. The effect of the climate variables was determined by maximum and minimum growth periods in assessing trunk growth. These growth periods were related with precipitation, average temperature and relative air humidity. The re-scaled wood density values, calculated using the radial growth of the tree trunks measured accurately with steel dendrometers, enabled the determination of the relationship of small changes in wood density and the effect of the climatic variations and growth rate of eucalyptus tree trunks. A high sensitivity of the wood density to variation in precipitation levels was found.

Microencapsulation of pequi pulp by spray drying: use of modified starches as encapsulating agent

The aim of this study was to evaluate the microencapsulation of pequi pulp by spray drying. A central composite rotational design was used in order to evaluate the effect of the independent variables: inlet air temperature, surfactant concentration and modified starch concentration. The dependent variables were assumed as yield of the process and the product features microencapsulated. A selection of the best process condition was performed to obtain the best condition of a product with the highest vitamin C and carotenoids content. Powders showed moisture content below 2%. The experimental values of hygroscopicity, yield, water activity, total carotenoids and vitamin C powders ranged from 7.96 to 10.67 g of adsorbed water/100g of solids, 24.34 to 49.80%, 0.13 to 0.30, 145.78 to 292.11 mg of ascorbic acid/g of pequi solids and 15.51 to 123.42 mg of carotenoids/g of pequi solids, respectively. The inlet air temperature 140°C, the surfactant concentration of 2.5% and the modified starch concentration of 22.5% was recommended as the selected condition. By the scanning electron microscopy, it was observed that most of the particles had spherical shape and smooth surface.

The effect of timing temporary cements to treat induced pulp necrosis in the teeth of dogs

During endodontic therapy (pulpectomy, root canal debridement and root canal filling) microbiological management is a major concern. Bacteria present in dentine tubules, apical foramina and apical delta are causally related to failure of the procedure. Studies have shown that during single session endodontic treatment bacteria remain within dental structures. The aim of the present study was to evaluate endodontic treatment performed as two sessions, using temporary endodontic dressing materials for different periods in four groups of experimental dogs. A total of 80 roots of second and third upper premolar teeth and second, third and fourth lower premolar teeth were divided into four groups. The pulp chamber was opened with burrs and the pulp exposed for 60 days to induce pulpal inflammation and necrosis. Groups II, III and IV were treated with calcium hydroxide plus camphorated paramono-chlorophenol (PMCC) for 7, 15 and 30 days, respectively. In all groups, the root canals were filled with zinc oxide-eugenol and gutta-percha cones. Clinical and radiographical measurements were performed every 2 weeks. After 60 days a small block section containing the teeth, surrounding periapical tissues and the periodontium was removed for histological and microbiological study. Histological analysis revealed intense inflammatory response in all groups. Microbiological analysis showed microbial reduction inversely proportional to the period of time that the intracanal temporary medicament was left in place.

Isolation, expansion and differentiation of cellular progenitors obtained from dental pulp of agouti (Dasyprocta prymnolopha Wagler, 1831)

Abstract: The study aimed to isolate, expand, differentiate and characterize progenitor cells existent in the dental pulp of agouti. The material was washed with PBS solution and dissociated mechanically with the aid of a scalpel blade on plates containing culture medium D-MEM/F-12, and incubated at 5% CO2-37⁰C. The growth curve, CFU assay, osteogenic/adipogenic differentiation and characterization were obtained from the isolation. The cells began to be released from the explant tissue around the 7th day of culture. By day 22 of culture, cells reached 80% confluence. At the UFC test, 81 colonies were counted with 12 days of cultivation. The growth curves before and after freezing showed a regular growth with intense proliferation and clonogenic potential. The cell differentiation showed formation of osteoblasts and fat in culture, starting at 15 days of culture in a specific medium. Flow cytometry (FACs) was as follows: CD34 (positive), CD14 (negative), CD45 (negative), CD73 (positive), CD79 (negative), CD90 (positive), CD105 (positive), demonstrating high specificity and commitment of isolated cells with mesenchymal stem cells strains. These results suggest the existence of a cell population of stem cells with mesenchymal features from the isolated tissue in the explants of agouti dental pulp, a potential model for study of stem cell strains obtained from the pulp tissue.

Controle químico de plantas daninhas na semeadura direta de tomate (Lycopersicon esculentum Mill.)

Em dois ensaios, um conduzido em Viçosa, MG, e outro em Domingos Martins, ES, estudou-se o comportamento dos herbicidas metribuzin, chloramben, napropamide, diphenamid, pebulate e trifluralin, nas doses de 0,36; 2,40; 2,50; 2,00; 3,60 e 0,67 kg/ha, respectivamente, e a combinação de 0,35 kg/ha de metribuzin com cada um dos demais, nas mesmas doses, no controle de plantas daninhas e na tolerância da cultura do tomate semeado diretamente no local definitivo. Num terceiro ensaio, conduzido em Viçosa, fez-se o mesmo estudo, combinando pebulate, nas doses 4,32 e 5,76 kg/ha, com chloramben, napropamide, diphenamid e metribuzin, nas doses de 3,40; 3,00; 5,00 e 0,70 kg/ha, respectivamente, e também os mesmos compostos, isoladamente, nas mesmas doses. Todos os herbicidas avaliados exerceram controle sobre as plantas daninhas; entretanto, a eficiência de cada um foi muito influenciada pela espécie presente. Apenas pebulate apresentou eficiente controle da tiririca (Cyperus rotundus L.). Chloramben, napropamide, diphenamid e trifluralin controlaram eficientemente capim-marmelada (Brachiaria plantaginea (Link.) Hitch.) e capim-colchão (Digitaria Sanguinalis (L.) Scop.). Metribuzin apresentou excelente controle de picão-preto (Bidens pilosa L.) e botão-de-ouro (Galin-soga parviflora Cav.). As misturas demetribuzin ou de pebulate com os demais herbicidas aumentaram a eficiência de controle e o número de espécies controladas. Nenhum dos herbicidas, nas doses estudadas, causou danos à cultura e os maiores pesos de matéria verde da parte aérea das plantas de tomate foram obtidos nos tratamentos que proporcionaram maior controle de plantas daninhas.

Efeitos alelopaticos de alguns extratos vegetais na germinação do tomateiro (Lycopersicon esculentum Mill. cv. Santa Cruz)

O presente trabalho teve por finalidade avaliar os possíveis efeitos alelopáticos de três plantas daninhas (Cyperus rotundus, Sorghum halepense e Cynodon dactylon), uma leguminosa (Canavalia ensiformis) e colza (Brassica napus), na germinação das sementes do tomateiro (Lycopersicon esculentum cv. Santa Cruz) utilizado como indicador. Tubérculos de tiririca, rizomas de capim massambará, o sistema radicular de grama seda, além de folhas e raízes de feijão-de-porco e colza, foram homogeneizados em solução aquosa, submetidos a filtração e centrifugação. A aplicação do sobrenadante no substrato de germinação das sementes de tomateiro mostrou afetar o processo germinativo e o desenvolvimento da radícula e do hipocótilo. C. rotundus, S. halepense e raízes de C. ensiformis possuem substâncias altamente inibitórias à germinação do tomateiro 'Santa Cruz'', sendo que a planta indicadora também mostrou-se sensível às substâncias presentes nas folhas de B. napus e em C. dactylon.

Estimativa da área foliar de plantas daninhas: Solanum americanum Mill

A maria pretinha (Solanum americanum Mill) é uma planta daninha infestante de diversas culturas e além da competição pode causar outros problemas. Nos estudos envolvendo a biologia e o controle de plantas daninhas, a área foliar é uma das mais importantes características a serem avaliadas, mas tem sido pouco estudada porque sua determinação exige equipamentos sofisticados ou utiliza técnicas destrutivas. Visando obter equações que permitissem a estimativa da área foliar desta planta daninha utilizando características lineares do limbo foliar, facilmente mensuráveis em plantas no campo, foram estudadas correlações entre a área foliar real e as seguintes características das folhas: comprimento ao longo da nervura principal (C), largura máxima do limbo (L) e o produto (C x L). Para tanto, foram mensuradas 200 folhas coletadas de plantas sujeitas às mais diversas condições ecológicas em que a espécie sobrevive, considerando-se todas as folhas das plantas desde que não apresentassem deformações oriundas de fatores, tais como, pragas, moléstias e granizo. Todas as equações, lineares simples, geométricas e exponenciais, permitiram boa estimativa da área foliar (Af) da maria pretinha. Do ponto de vista prático, sugere-se optar pela equação linear simples envolvendo o produto (C x L), a qual apresentou o menor QM Resíduo. Assim, a estimativa da área foliar de S. americanum pode ser efetuada pela equação AF = 0,5632 x (C x L), com coeficiente de determinação (R2) de valor igual a 0,9516.

Characterization of a methionine-rich protein from the seeds of Cereus jamacaru Mill. (Cactaceae)

We describe here the isolation and characterization of a major albumin from the seeds of Cereus jamacaru (Cactaceae), to which we gave the trivial name of cactin. This protein has a molecular mass of 11.3 kDa and is formed by a light chain (3.67 kDa) and a heavy chain (7.63 kDa). This protein was isolated using a combination of gel filtration chromatography and reverse-phase HPLC. The amino acid composition of cactin was determined and found to resemble that of the 2S seed reserve protein from the Brazil nut, a protein remarkable for its high methionine content. The usefulness of cactin as a molecular marker in the taxonomy of the Cactaceae is discussed.

Lipopolysaccharide-induced dental pulp cell apoptosis and the expression of Bax and Bcl-2 in vitro

Lipopolysaccharide exerts many effects on many cell lines, including cytokine secretion, and cell apoptosis and necrosis. We investigated the in vitro effects of lipopolysaccharide on apoptosis of cultured human dental pulp cells and the expression of Bcl-2 and Bax. Dental pulp cells showed morphologies typical of apoptosis after exposure to lipopolysaccharide. Flow cytometry showed that the rate of apoptosis of human dental pulp cells increased with increasing lipopolysaccharide concentration. Compared with controls, lipopolysaccharide promoted pulp cell apoptosis (P < 0.05) from 0.1 to 100 μg/mL but not at 0.01 μg/mL. Cell apoptosis was statistically higher after exposure to lipopolysaccharide for 3 days compared with 1 day, but no difference was observed between 3 and 5 days. Immunohistochemistry showed that expression of Bax and Bcl-2 was enhanced by lipopolysaccharide at high concentrations, but no evident expression was observed at low concentrations (0.01 and 0.1 μg/mL) or in the control groups. In conclusion, lipopolysaccharide induced dental pulp cell apoptosis in a dose-dependent manner, but apoptosis did not increase with treatment duration. The expression of the apoptosis regulatory proteins Bax and Bcl-2 was also up-regulated in pulp cells after exposure to a high concentration of lipopolysaccharide.

Participation of the GABAergic system in the anesthetic effect of Lippia alba (Mill.) N.E. Brown essential oil

The objective of this study was to identify the possible involvement of the GABAergic system in the anesthetic effect of Lippia alba essential oil (EO). We propose a new animal model using silver catfish (Rhamdia quelen) exposed to an anesthetic bath to study the mechanism of action of EO. To observe the induction and potentiation of the anesthetic effect of EO, juvenile silver catfish (9.30 ± 1.85 g; 10.15 ± 0.95 cm; N = 6) were exposed to various concentrations of L. alba EO in the presence or absence of diazepam [an agonist of high-affinity binding sites for benzodiazepinic (BDZ) sites coupled to the GABA A receptor complex]. In another experiment, fish (N = 6) were initially anesthetized with the EO and then transferred to an anesthetic-free aquarium containing flumazenil (a selective antagonist of binding sites for BDZ coupled to the GABA A receptor complex) or water to assess recovery time from the anesthesia. In this case, flumazenil was used to observe the involvement of the GABA-BDZ receptor in the EO mechanism of action. The results showed that diazepam potentiates the anesthetic effect of EO at all concentrations tested. Fish exposed to diazepam and EO showed faster recovery from anesthesia when flumazenil was added to the recovery bath (12.0 ± 0.3 and 7.2 ± 0.7, respectively) than those exposed to water (9.2 ± 0.2 and 3.5 ± 0.3, respectively). In conclusion, the results demonstrated the involvement of the GABAergic system in the anesthetic effect of L. alba EO on silver catfish.