Physical quality of an Oxisol cultivated with maize submited to cover crops in the pre-cropping period

The intensive use of land alters the distribution of the pore size which imparts consequences on the soil physical quality. The Least Limiting Water Range (LLWR) allows for the visualization of the effects of management systems upon either the improvement or the degradation of the soil physical quality. The objective of this study was to evaluate the physical quality of a Red Latosol (Oxisol) submited to cover crops in the period prior to the maize crop in a no-tillage and conventional tillage system, using porosity, soil bulk density and the LLWR as attributes. The treatments were: conventional tillage (CT) and a no-tillage system with the following cover crops: sunn hemp (Crotalaria juncea L.) (NS), pearl millet (Pennisetum americanum (L.) Leeke) (NP) and lablab (Dolichos lablab L.) (NL). The experimental design was randomized blocks in subdivided plots with six replications, with the plots being constituted by the treatments and the subplots by the layers analyzed. The no-tillage systems showed higher total porosity and soil organic matter at the 0-0.5 m layer for the CT. The CT did not differ from the NL or NS in relation to macroporosity. The NP showed the greater porosity, while CT and NS presented lower soil bulk density. No < 10 % airing porosity was found for the treatments evaluated, and value for water content where soil aeration is critical (θPA) was found above estimated water content at field capacity (θFC) for all densities. Critical soil bulk density was of 1.36 and 1.43 Mg m-3 for NP and CT, respectively. The LLWR in the no-tillage systems was limited in the upper part by the θFC, and in the bottom part, by the water content from which soil resistance to penetration is limiting (θPR). By means of LLWR it was observed that the soil presented good physical quality.

Chemical dispersants and pre-treatments to determine clay in soils with different mineralogy

Knowledge of the soil physical properties, including the clay content, is of utmost importance for agriculture. The behavior of apparently similar soils can differ in intrinsic characteristics determined by different formation processes and nature of the parent material. The purpose of this study was to assess the efficacy of separate or combined pre-treatments, dispersion methods and chemical dispersant agents to determine clay in some soil classes, selected according to their mineralogy. Two Brazilian Oxisols, two Alfisols and one Mollisol with contrasting mineralogy were selected. Different treatments were applied: chemical substances as dispersants (lithium hydroxide, sodium hydroxide, and hexametaphosphate); pre-treatment with dithionite, ammonium oxalate, and hydrogen peroxide to eliminate organic matter; and coarse sand as abrasive and ultrasound, to test their mechanical action. The conclusion was drawn that different treatments must be applied to determine clay, in view of the soil mineralogy. Lithium hydroxide was not efficient to disperse low-CEC electropositive soils and very efficient in dispersing high-CEC electronegative soils. The use of coarse sand as an abrasive increased the clay content of all soils and in all treatments in which dispersion occurred, with or without the use of chemical dispersants. The efficiency of coarse sand is not the same for all soil classes.

Digital soil mapping: strategy for data pre-processing

The region of greatest variability on soil maps is along the edge of their polygons, causing disagreement among pedologists about the appropriate description of soil classes at these locations. The objective of this work was to propose a strategy for data pre-processing applied to digital soil mapping (DSM). Soil polygons on a training map were shrunk by 100 and 160 m. This strategy prevented the use of covariates located near the edge of the soil classes for the Decision Tree (DT) models. Three DT models derived from eight predictive covariates, related to relief and organism factors sampled on the original polygons of a soil map and on polygons shrunk by 100 and 160 m were used to predict soil classes. The DT model derived from observations 160 m away from the edge of the polygons on the original map is less complex and has a better predictive performance.

Educação no asilo dos expostos da Santa Casa em São Paulo: 1896-1950

Este texto pretende identificar aspectos da educação das crianças de zero a seis anos, no Asilo dos Expostos da Santa Casa de Misericórdia de São Paulo, de 1896 até 1950. Para tanto, foram consultados os Relatórios dos Mordomos dos Expostos. O texto trata inicialmente das propostas para os bebês, e posteriormente das propostas para as crianças de três a seis anos. Em relação aos bebês, o aspecto mais importante foi o fato de as crianças não serem mais entregues às amas para serem criadas, permanecendo no berçário, que foi fundado em 1936. Com relação às crianças maiores, desde o início do século identifica-se a existência do jardim-de-infância, que irá também se renovar na década de 1940, com a chegada de profissionais ligadas à secretaria estadual de educação. As propostas e as concepções pedagógicas existentes na sociedade se manifestam nas funções educacionais do asilo.

Desenvolvimentismo e pragmatismo: o ideário do MEC nos anos 1950

Este artigo tem como objetivo mostrar como o desenvolvimentismo e o pragmatismo, dois pensamentos de natureza distinta, contribuem, cada um à sua maneira, para fundamentar uma política de reconstrução nacional nos anos 1950, em particular no âmbito do Ministério da Educação e Cultura - MEC. A idéia central é que, por circularem nos mesmos espaços institucionais, esses dois pensamentos acabam por interagir um com o outro, de tal modo que a ideologia desenvolvimentista se transforma em um solo fértil para a retomada e expansão do pragmatismo. Para explicar esse fenômeno, recorda-se que ambos se ancoram em uma concepção de cunho prático baseada na política. Chama-se a atenção para a maneira como o Instituto Superior de Estudos Brasileiros - Iseb - e o Instituto Nacional de Estudos Pedagógicos - Inep -, dois órgãos do MEC responsáveis por fomentar um pensamento nacional, se apropriam desses ideários para a formulação e a implementação de políticas de reconstrução nacional.

O papel da igreja na educação escolar masculina na década de 1950

É possível afirmar que estudos sobre colégios católicos, ao propiciarem uma compreensão acerca das estratégias de socialização por eles utilizadas, estariam cooperando para elucidação das novas configurações de poder da Igreja. Acreditamos que os valores e comportamentos ali fabricados constituam a base da ação de sua liderança leiga, que expressariam certos modos de pensar da Igreja. Este texto pretende mostrar que o trabalho educacional religioso, desenvolvido por um tradicional colégio católico para moços no Rio de Janeiro nos anos 1950, ao moldar certo tipo de aluno, espera que a moral cristã impregne suas vidas. Os conceitos de socialização e juventude, o Rio de Janeiro e a Igreja nos anos 1950 são os temas abordados num primeiro momento. Em uma segunda etapa, chama-se a atenção para o conjunto de práticas de educação religiosa utilizado pela escola, bem como para algumas características sociais dos alunos que se encontravam sujeitos a essa ação pedagógica.

Progresso genético do melhoramento de arroz de terras altas no período de 1950 a 2001

O objetivo deste trabalho foi quantificar o progresso genético obtido pelo melhoramento genético na cultura do arroz de terras altas, no período de 1950 a 2001. Foram feitos quatro experimentos de campo, nas localidades: Aeroporto e Agronomia, em Viçosa, MG; e nas Fazendas Capivara e Palmital, em Santo Antônio de Goiás, GO, e Goianira, GO, respectivamente. Os experimentos foram realizados no delineamento de blocos ao acaso, com três repetições. Avaliaram-se 25 cultivares, desenvolvidas no período de 1950 a 2001. Foram coletados e analisados os dados referentes à produtividade de grãos, altura das plantas e dias para a floração. A fim de se obter estimativa mais precisa do ganho genético, optou-se por dividir as cultivares nos grupos precoce e tardio. Para a obtenção da estimativa do progresso genético, foi realizada a regressão linear das médias das cultivares por década de lançamento. Os ganhos genéticos para a produtividade de grãos foram de 0,3 e 2,09% ao ano, nos grupos precoce e tardio, respectivamente. A altura média das plantas das cultivares reduziu-se em 21 cm no grupo precoce e em 38 cm no tardio, no período avaliado. Houve acréscimo médio de dez dias no ciclo, no grupo de cultivares precoce, e decréscimo de 13 dias no grupo tardio.

Methods for assessment of pre-harvest sprouting in wheat cultivars

The objective of this work was to test methods for pre-harvest sprouting assessment in wheat cultivars. Fourteen wheat cultivars were grown in Londrina and Ponta Grossa municipalities, Paraná state, Brazil. They were sampled at 10 and 17 days after physiological maturity and evaluated using the methods of germination by rainfall simulation (in a greenhouse), in-ear grain sprouting, and grains removed from the ears. The in-ear grain sprouting method allowed the differentiation of cultivars, but showed different resistance levels from the available description of cultivars. The sprouting of grain removed from the ears did not allow a reliable distinction of data on germination in any harvest date or location. The method of rainfall simulation is the most suitable for the assessment of cultivars as to pre-harvest sprouting, regardless of the sampling date and evaluated location.

Spontaneous rupture of ovarian cystadenocarcinoma: pre- and post-rupture computed tomography evaluation

AbstractEpithelial ovarian tumors are the most common malignant ovarian neoplasms and, in most cases, eventual rupture of such tumors is associated with a surgical procedure. The authors report the case of a 54-year-old woman who presented with spontaneous rupture of ovarian cystadenocarcinoma documented by computed tomography, both before and after the event. In such cases, a post-rupture staging tends to be less favorable, compromising the prognosis.

Automated flow-injection method for cadmium determination with pre-concentration and reagent preparation on-line

The spectrophotometric determination of Cd(II) using a flow injection system provided with a solid-phase reactor for cadmium preconcentration and on-line reagent preparation, is described. It is based on the formation of a dithizone-Cd complex in basic medium. The calibration curve is linear between 6 and 300 µg L-1 Cd(II), with a detection limit of 5.4 µg L-1, an RSD of 3.7% (10 replicates in duplicate) and a sample frequency of 11.4 h-1. The proposed method was satisfactorily applied to the determination of Cd(II) in surface, well and drinking waters.

Flow analysis by using solenoid valves for As(III) determination in natural waters by an on-line separation and pre-concentration system coupled to a tungsten coil atomizer

A flow system coupled to a tungsten coil atomizer in an atomic absorption spectrometer (TCA-AAS) was developed for As(III) determination in waters, by extraction with sodium diethyldithiocarbamate (NaDDTC) as complexing agent, and by sorption of the As(III)-DDTC complex in a micro-column filled with 5 mg C18 reversed phase (10 µL dry sorbent), followed by elution with ethanol. A complete pre-concentration/elution cycle took 208 s, with 30 s sample load time (1.7 mL) and 4 s elution time (71 µL). The interface and software for the synchronous control of two peristaltic pumps (RUN/ STOP), an autosampler arm, seven solenoid valves, one injection valve, the electrothermal atomizer and the spectrometer Read function were constructed. The system was characterized and validated by analytical recovery studies performed both in synthetic solutions and in natural waters. Using a 30 s pre-concentration period, the working curve was linear between 0.25 and 6.0 µg L-1 (r = 0.9976), the retention efficiency was 94±1% (6.0 µg L-1), and the pre-concentration coefficient was 28.9. The characteristic mass was 58 pg, the mean repeatability (expressed as the variation coefficient) was 3.4% (n=5), the detection limit was 0.058 µg L-1 (4.1 pg in 71 µL of eluate injected into the coil), and the mean analytical recovery in natural waters was 92.6 ± 9.5 % (n=15). The procedure is simple, economic, less prone to sample loss and contamination and the useful lifetime of the micro-column was between 200-300 pre-concentration cycles.

The pre-history of cryoscopy: what was done before raoult?

Cryoscopy is considered one of the foundations of the modern theory of solutions and of physical chemistry. This paper shows in order the first regularities pointed out by several scientists on the subject, in the first chapter of its birth as a scientific discipline. The study is focused on the identification of the different steps that helped, first qualitatively and then quantitatively, to adjust the different classes of possible solutions, including those that formed hydrates, to a basic formulation that the French scientist François-Marie Raoult would later generalize in the law that bears his name.

The importance of pre-treatment of spent hydrotreating catalysts on metals recovery

This work describes a three-step pre-treatment route for processing spent commercial NiMo/Al2O3 catalysts. Extraction of soluble coke with n-hexane and/or leaching of foulant elements with oxalic acid were performed before burning insoluble coke under air. Oxidized catalysts were leached with 9 mol L-1 sulfuric acid. Iron was the only foulant element partially leached by oxalic acid. The amount of insoluble matter in sulfuric acid was drastically reduced when iron and/or soluble coke were previously removed. Losses of active phase metals (Ni, Mo) during leaching with oxalic acid were compensated by the increase of their recovery in the sulfuric acid leachate.

Bioanalytical method for the quantification of the monastrol derivative anticancer candidate lasom 65 in pre-clinical pharmacokinetic investigations

A simple HPLC/UV method was developed for the determination of the anticancer candidate LaSOM 65 in rat plasma. Samples were cleaned by protein precipitation with acetonitrile (recovery > 95%), after which they were subjected to chromatography under the isocratic elution of an acetonitrile:water (45:55, ν/ν) solution with detection at 303 nm. The method was linear (r² > 0.98) over the concentration range (0.05-2 µg mL-1) with intra- and inter-day precision ranging from 9.6% to 13.6% and 4.3% to 5.4%, respectively. The accuracy of the method ranged from 85% to 113.6%, and it showed sufficient sensitivity to determine pharmacokinetic parameters of LaSOM 65 after intravenous administration to Wistar rats.