Risk stratification with troponin I in patients undergoing myocardial revascularization surgery

OBJECTIVE: To determine the immediate behavior and the prognostic value in terms of late survival of serum troponin I measurement in patients undergoing myocardial revascularization surgery with extracorporeal circulation. METHODS: We studied 88 random patients, 65 (73.8%) of the male sex, who underwent myocardial revascularization surgery with extracorporeal circulation. Troponin measurements were performed as follows: in the preoperative period, right after intensive care unit admission, and on the first and second postoperative days. Values below 0.1 nanogram per milliliter (ng/mL) were considered normal. The cut points for late prognostic assessment were 0.5 ng/mL; 1 ng/mL; 2.5 ng/mL; and 5 ng/mL. RESULTS: The serum troponin I levels were elevated on the first postoperative day, suggesting the occurrence of specific myocardial damage. Patients with a poor prognosis could be identified, because the serum levels above 2.5 ng/mL and 5 ng/mL in the postoperative period resulted, respectively, in mortality rates of 33% and 50% in a maximum 6-month follow-up. CONCLUSION: Troponin I values around 2.5 ng/mL in the postoperative period should call attention to the need for more aggressive diagnostic or therapeutical measures.

Ocorrência de domácias em espécies e híbridos da Família Vitaceae

The paper deals with the ocurrence of domatia in species and hybrids of Vitaceae family. The author found domaãtia in 95 of 157 hybrids studied. The domatia are always in the axils of the first and second ribs, and occasionaly also in ribs of others orders. The domatia found were of the types: "en touffe de poils", "en pertuis" and "en pochette", types according to the Chevalier's Classification (1941). It was found a varation of the type "en pertuis", the hole being not circular but narrow and long. One of the hybrids have domatia of two types: "en touffe de pois" and "en pertuis". Many of the domatia have mites in its interior.

Predation Potential of the Water Bugs Sphaerodema rusticum on the Sewage Snails Physa acuta

The sewage snail Physa acuta is a serious threat to certain economic plants and to the purification plant of sewage works by rendering the biofilters ineffective. Various attempts are being made to control it. The efficacy of the predacious water bugs Sphaerodema rusticum was judged experimentally, in the laboratory in the potential control of P. acuta. It is revealed that, when supplied separately, the first, second and third instar and the adult S. rusticum did not attack P. acuta belonging to 3.1-8 mm, 5.1-8 mm, 7.1-8 mm and <= 3 mm size classes respectively. In the remaining trials predation rate varied from zero to eight (average 2.3) individuals per predator per day. In experiments with P. acuta belonging to all the size classes supplied together, none, except the first instar S. rusticum, attacked the prey individuals belonging to the lowest (<= 3 mm) size class. The first and second instar S. rusticum, in both trials did not attack P. acuta larger than 4 mm and 5 mm in shell length respectively. The water bugs belonging to the third, fourth, fifth instar and adult stages though preyed upon P. acuta with 3.1-8 mm shell length. The average rate of predation by a single S. rusticum varied from 0.14-3.08 individuals per day depending upon the size of P. acuta and the stage of S. rusticum. A single S. rusticum, irrespective of instar and adult stages, destroyed on average 4.16 P. acuta daily irrespective of sizes. It is estimated that one S. rusticum could destroy 1,360 P. acuta in its life time. The results clearly indicate that the water bug S. rusticum may be used to control the snails P. acuta.

Effect of diflubenzuron on immature stages of Haematobia irritans (L.) (Diptera: Muscidae) in Uberlândia, State of Minas Gerais, Brazil

Horn fly immatures were raised in media containing different concentrations of diflubenzuron in order to verify their susceptibility to this insect growth regulator (IGR). The 50% and 95% lethal concentrations of diflubenzuron for the population (LC50, LC95) were determined as well as the effect of this IGR on the different immature horn fly stages. The tests were performed using the progeny of adults collected in the field. The immatures were maintained in a growth chamber at 25.0 ± 0.5ºC and 12-12 h photoperiod. IGR concentrations of 300 ppb, 100 ppb and 50 ppb were lethal for 100% of the sample. Pupae malformation occurred in the breeding media containing different diflubenzuron concentrations. Values for LC50 , LC95 (± 95% fiducial limits) and the slope of the regression line were respectively, 25.521 ± 1.981 ppb, 34.650 ± 2.001 ppb and 12.720 ± 1.096. The third larval instar was more sensitive to the sub-lethal concentration of the product than the first and second ones were. The results indicate that this IGR can be an important tool for controlling horn fly populations as well as for managing horn fly resistance to conventional insecticides against Haematobia irritans in Uberlândia, State of Minas Gerais.

Application of control measures for infections caused by multi-resistant gram-negative bacteria in intensive care unit patients

Multi-resistant gram-negative rods are important pathogens in intensive care units (ICU), cause high rates of mortality, and need infection control measures to avoid spread to another patients. This study was undertaken prospectively with all of the patients hospitalized at ICU, Anesthesiology of the Hospital São Paulo, using the ICU component of the National Nosocomial Infection Surveillance System (NNIS) methodology, between March 1, 1997 and June 30, 1998. Hospital infections occurring during the first three months after the establishment of prevention and control measures (3/1/97 to 5/31/97) were compared to those of the last three months (3/1/98 to 5/31/98). In this period, 933 NNIS patients were studied, with 139 during the first period and 211 in the second period. The overall rates of infection by multi-resistant microorganisms in the first and second periods were, respectively, urinary tract infection: 3.28/1000 patients/day; 2.5/1000 patients/day; pneumonia: 2.10/1000 patients/day; 5.0/1000 patients/day; bloodstream infection: 1.09/1000 patients/day; 2.5/1000 patients/day. A comparison between overall infection rates of both periods (Wilcoxon test) showed no statistical significance (p = 0.067). The use of intervention measures effectively decreased the hospital bloodstream infection rate (p < 0.001), which shows that control measures in ICU can contribute to preventing hospital infections.

Failure to demonstrate experimental vertical transmission of the epidemic strain of Chikungunya virus in Aedes albopictus from La Réunion Island, Indian Ocean

Aedes albopictus was responsible for transmission in the first outbreak of chikungunya (CHIK) on La Réunion Island, Indian Ocean, in 2005-2006. The magnitude of the outbreak on this island, which had been free of arboviral diseases for over 30 years, as well as the efficiency of Ae. albopictus as the main vector, raises questions about the maintenance of the CHIK virus (CHIKV) through vertical transmission mechanisms. Few specimens collected from the field as larvae were found to be infected. In this study, Ae. albopictus originating from La Réunion were orally infected with a blood-meal containing 10(8) pfu/mL of the CHIKV epidemic strain (CHIKV 06.21). Eggs from the first and second gonotrophic cycles were collected and raised to the adult stage. The infectious status of the progeny was checked (i) by immunofluorescence on head squashes of individual mosquitoes to detect the presence of viral particles or (ii) by quantitative RT-PCR on mosquito pools to detect viral RNA. We analysed a total of 1,675 specimens from the first gonotrophic cycle and 1,709 from the second gonotrophic cycle without detecting any viral particles or viral RNA. These laboratory results are compared to field records.

The impact of the nelfinavir resistance-conferring mutation D30N on the susceptibility of HIV-1 subtype B to other protease inhibitors

The human immunodeficiency virus type 1 (HIV-1) protease mutation D30N is exclusively selected by the protease inhibitor (PI) nelfinavir and confers resistance to this drug. We demonstrate that D30N increases the susceptibility to saquinavir (SQV) and amprenavir in HIV-1 subtype B isolates and that the N88D mutation in a D30N background neutralizes this effect. D30N also suppresses indinavir (IDV) resistance caused by the M46I mutation. Interestingly, in patients with viruses originally containing the D30N mutation who were treated with IDV or SQV, the virus either reversed this mutation or acquired N88D, suggesting an antagonistic effect of D30N upon exposure to these PIs. These findings can improve direct salvage drug treatment in resource limited countries where subtype B is epidemiologically important and extend the value of first and second line PIs in these populations.

Can larval lacewings Chrysoperla externa (Hagen): (Neuroptera, Chrysopidae) be reared on pollen?

The aim of this study was to verify the viability of exclusive use of elephant grass pollen, Pennisetum purpureum (Schum), to feed larvae of the lacewing Chrysoperla externa (Hagen, 1861). The insects were kept at 24ºC and the duration and survival rate of each instar and the larval and pupal phases were recorded. The diet provided complete development of the larvae. The average duration of the first and second instars was the same (6.9 days), while the third instar lasted an average of 10.0 days and the pupal phase 13.2 days. The average survival of the larvae was above 80% for the first, second and third instars, and 70.0% and 33.3% for the larval and pupal phase, respectively. These results indicate that the exclusive use of elephant grass pollen can provide complete development of the immature stages of this predator.

Availability of a soluble phosphorus source applied to soil samples with different acidicity levels

Considerations on the interactions of P in the soil-plant system have a long history, but are still topical and not yet satisfactorily understood. One concern is the effect of liming before or after application of soluble sources on the crop yield and efficiency of available P under these conditions. The aim of this study was to evaluate the effect of soil acidity on availability of P from a soluble source, based on plant growth and chemical extractants. Nine soil samples were incubated with a dose of 200 mg kg-1 P in soil with different levels of previously adjusted acidity (pH H2O 4.5; 5.0; 5.5; 6.0 and 6.5) and compared to soils without P application. After 40 days of soil incubation with a P source, each treatment was limed again so that all pH values were adjusted to 6.5 and then sorghum was planted. After the first and second liming the P levels were determined by the extractants Mehlich-1, Bray-1 and Resin, and the fractionated inorganic P forms. In general, the different acidity levels did not influence the P availability measured by plant growth and P uptake at the studied P dose. For some soils however these values increased or decreased according to the initial soil pH (from 4.5 to 6.5). Plant growth, P uptake and P extractable by Mehlich-1 and Bray-1 were significantly correlated, unlike resin-extractable P, at pH values raised to 6.5. These latter correlations were however significant before the second liming. The P contents extracted by Mehlich-1 and Bray-1 were significantly correlated with each other in the entire test range of soil acidity, even after adjusting pH to 6.5, besides depending on the soil buffering capacity for P. Resin was also sensitive to the properties that express the soil buffering capacity for P, but less clearly than Mehlich-1 and Bray-1. The application of triple superphosphate tended to increase the levels of P-Al, P-Fe and P-Ca and the highest P levels extracted by Bray-1 were due to a higher occurrence of P-Al and P-Fe in the soils.

Decision criteria for optimizing postemergence johnsongrass control in soybean crops in Argentina

Field studies were established in Zavalla and Oliveros, Argentina, during four years in order to optimize Johnsongrass (Sorghum halepense (L.) Pers.) chemical control by means of the thermal calendar model in comparison with other criteria (weed height or days after sowing). The effect of three application dates of postemergence herbicides was determined by visual control, density of tillers originated from rhizome bud regrowth, and from crown and shoot bud regrowth, and soybean yield. Following the thermal calendar model criterion, applications during the second date afforded the best control. Weed height for the first date showed little variability between experiments but was highly variable in the second and third application dates, achieving in some cases values greater than 120 cm. For all years, no significant differences were detected for crop yield between the first and second application dates, and yields were always lower for the third date. The greatest rhizome bud regrowth was observed for the earliest application date and the highest crown and shoot bud regrowth was determined for the last application date. Parameters associated with control efficiency showed the best behaviour for the second date. However, plant height at this moment may interfere with herbicide application and the variability exhibited by this parameter highlights the risk of determining control timing using only one decision criterion.

Sample size for measurement of root traits on common bean by image analysis

Evaluation of root traits may be facilitated if they are assessed on samples of the root system. The objective of this work was to determine the sample size of the root system in order to estimate root traits of common bean (Phaseolus vulgaris L.) cultivars by digital image analysis. One plant was grown per pot and harvested at pod setting, with 64 and 16 pots corresponding to two and four cultivars in the first and second experiments, respectively. Root samples were scanned up to the completeness of the root system and the root area and length were estimated. Scanning a root sample demanded 21 minutes, and scanning the entire root system demanded 4 hours and 53 minutes. In the first experiment, root area and length estimated with two samples showed, respectively, a correlation of 0.977 and 0.860, with these traits measured in the entire root. In the second experiment, the correlation was 0.889 and 0.915. The increase in the correlation with more than two samples was negligible. The two samples corresponded to 13.4% and 16.9% of total root mass (excluding taproot and nodules) in the first and second experiments. Taproot stands for a high proportion of root mass and must be deducted on root trait estimations. Samples with nearly 15% of total root mass produce reliable root trait estimates.

Método Melhorado para Calcular a Leitura Infinita de Cinéticas de Primeira Ordem

Infinity readings for first order kinetics can be calculated from any three measurements (triads) of a physical property l at three equallyspaced times. Accurate results can be obtained from time intervals aslow as 0.4 half-life. Calculation of infinity readings l¥ from severaltriads at increasing values of time gives an insight into the deviation of the first order kinetics when parallel, consecutive or other spurious reactions occur along with the main first order reaction, not allowing direct measurements or calculation of l¥. The proposed method is more sensitive in distinguishing between first and second order kinetics than the Guggenheim and Kezdy-Swinbourne methods.

Efeito do tratamento térmico na microestrutura, turbostraticidade e superfície de carbono vítreo reticulado analisado por XPS, espalhamento Raman e voltametria cíclica

The structural and surface properties of reticulated vitreous carbon (RVC) were discussed as a function of its heat treatment temperature (HTT), for samples produced in the range from 700 to 2000 ºC, using the furfuryl precursor resin. The samples were analyzed by x-ray photoelectron spectroscopy, first and second order Raman scattering as well as electrochemical response. Exploring the material turbostraticity concept, the interdependence between the RVC chemical surface variation and its defects were demonstrated. The influence of heteroatom presence was discussed in the material ordering for HTT lower than 1300 ºC while the graphitization process evolution was also pointed out for HTT higher than 1500 ºC.

Biomassa e energia

Biomass was the dominating source of energy for human activities until the middle 19th century, when coal, oil, gas and other energy sources became increasingly important but it still represents ca. 10% of the worldwide energy supply. The major part of biomass for energy is still "traditional biomass" used as wood and coal extracted from native forests and thus non-sustainable, used with low efficiency for cooking and home heating, causing pollution problems. This use is largely done in rural areas and it is usually not supported by trading activities. There is now a strong trend to the modernization of biomass use, especially making alcohol from sugar cane thus replacing gasoline, or biodiesel to replace Diesel oil, beyond the production of electricity and vegetable coal using wood from planted forests. As recently as in 2004, sustainable "modern biomass" represented 2% of worldwide energy consumption. This article discusses the perspectives of the "first" and "second" technology generations for liquid fuel production, as well as biomass gaseification to make electricity or syngas that is in turn used in the Fischer-Tropsch process.

Cadeia do biodiesel da bancada à indústria: uma visão geral com prospecção de tarefas e oportunidades para P&D&I

Contextualized overview of the Biodiesel Production Chain, from the lab bench to the industry, with critical evaluation of state-of-art and technological development through scientific articles and patents, focusing on feedstock, reaction/production, first and second generation processes, specification and quality, transport, storage, co-products (effluents and sub-products), and emissions. Challenges are identified and solutions are proposed based on the Brazilian feedstock, edaphoclimatic conditions, process monitoring in remote regions, state policy, and environment preservation, among others. Forecasts are made based on the technology assessment, identifying future trends and opportunities for R&D&I.