Utilização de modelagem numérica para o estudo da dispersão de poluentes emitidos pela usina termoelétrica Presidente Médici

The purpose of the present study is to evaluate the atmospheric behavior in the dispersion of the pollutants SO2, PM10 and NOx emitted by the President Medici power plant in Candiota, RS. The RAMS atmospheric model was applied and the simulations were conducted from april in 20 to 24, 2004. The concentrations of the pollutants simulated by RAMS were compared with the data measured at the air quality monitoring stations. The results showed significant influence of the emissions generated by the power plant on the concentration of the pollutants.

Perfil espacial e temporal de poluentes nas águas da represa municipal de São José do Rio Preto, São Paulo, Brasil

In this manuscript, seasonal and spatial trends of water collected from two sampling places in the Preto River in the Turvo-Grande watershed were evaluated. Water samples were collected during June/07 to July/08 and parameters sulphate, total organic carbon, ammonia, conductivity, dissolved oxygen, temperature, dissolved total solids and nitrate were quantified. Seasonal trend indicated sanitary effluents as a point source of contamination in both sampling points. Vertical trends demonstrated that the Municipal Dam was not stratified and received a diffuse source of pollutants from flooding and agriculture runoffs. It was also verified that there is relatively fast ammonia consumption kinetics having a half-life time of 1.43 h which can explain the low ammonia concentrations found in these aquatic bodies.

Desenvolvimento e aplicação de sistema passivo de coleta de poluentes atmosféricos para monitoramento de Cd, Cr, Pb, Cu, Fe, Mn, Zn e particulados totais

The objective of this study was to assess a new monitoring technique of particulate and trace metals in the atmosphere via the use of a passive sampler of air pollutants in the city of Goiânia. The average particulate weight and average concentrations of metals Fe, Cr, Zn, Pb, Cu, Mn, and Cd were 0.1104 g and 257.5; 23.4; 17.8; 6.7; 1.9; 0.8; 0.2 μg/m²/day, respectively. Higher Pb and Cr concentrations were obtained in areas with intense traffic. This study revealed that it is possible to monitor trace metals with passive sampling, developed at a low cost and operational facility.

Alteração da atividade enzimática em organismos aquáticos por poluentes de origem agrícola: uma abordagem geral e sobre a suscetibilidade da fosfatase ácida

The input of agrochemicals in the aquatic compartment can results in biochemical injuries for living organisms. In this context, the knowledge of alterations of enzymatic activities due the presence of agriculture pollutants contributes for the elucidation of the mechanisms of toxicity, implementation of economic methods for monitoring purposes and establishment of maximum allowed concentrations. In the present work, the above considerations are discussed, and data concerning changes in enzymatic function by pesticides and fertilizer contaminants are reviewed. Also, we focused on the acid phosphatase due its susceptibility to several pollutants and diversity in cellular functions.

Uma análise do coeficiente de remoção de poluentes em função do espectro de gotas de chuva em diferentes localidades no Brasil e Alemanha

The pollutant transference among reservoirs atmosphere-hydrosphere, relevant to the atmospheric chemistry, depends upon scavenging coefficient (Λ) calculus, which depends on the raindrop size distribution as well as on the rainfall systems, both different to each locality. In this work, the Λ calculus will be evaluated to gas SO2 and particulate matter fine and coarse among five sites in Germany and two in Brazil. The results show three possible classifications in function of Λ, comparable to literature, however with a greater range due to the differences of rainfall system sites. This preliminary study supports future researches

Alternativas verdes para o preparo de amostra e determinação de poluentes fenólicos em água

The restricted availability of water sources suitable for consumption and high costs for obtaining potable water has caused an increase of the conscience concerning the use. Thus, there is a high demand for "environmentally safe methods" which are according to the principles of Green Chemistry. Moreover, these methods should be able to provide reliable results for the analysis of water quality for various pollutants, such as phenol. In this work, greener alternatives for sample preparation for phenol determination in aqueous matrices are presented, which include: liquid phase microextraction, solid phase microextraction, flow analysis, cloud point extraction and aqueous two-phase systems.

Transporte de glifosato pelo escoamento superficial e por lixiviação em um solo agrícola

Glyphosate was determined in runoff and leaching waters in agricultural soil that received an application of active ingredient and was exposed to simulated intensive rain conditions. The concentrations decreased during the simulation period and the concentrations of the runoff were higher than those achieved in the samples of leaching waters. The concentrations were lower than the pattern in the Brazilian Regulation MS N. 518/2004 for drinking water. The transported load of the applied active ingredient by the leaching was of 15.4% (w/w) and for the runoff was of 1.7% (w/w).

Aplicações de cromatografia líquida de alta eficiência para o estudo de poluentes orgânicos emergentes

Emerging organic pollutants (EOP) include many environmental contaminants based on commercial products such as pharmaceuticals, personal care products, detergents, gasoline, polymers, etc. EOP may be candidates for future regulation as they offer potential risk to environmental and human health due to their continual entrance into the environment and to the fact that even the most modern wastewater treatment plants are not able to totally transform / remove these compounds. High performance liquid chromatography is recommended to separate emerging organic pollutants with characteristics of high polarity and low volatility, especially pharmaceuticals, from environmental matrices.

Avaliação do efeito de gases poluentes na corrosão metálica: um experimento para o ensino da corrosão

In this work one proposes a didactic experience to simulate atmospheric corrosion of copper and nickel, due to sulfur dioxide presence. This is an opportunity to understand some basic aspects of atmospheric corrosion, by using fundamental concepts in chemistry, reactions of extraction and characterization of pollutants, as well as their participation in corrosion process. This subject opens a space for discussion about necessity of pollutant gases emissions control for preservation of materials and the environment.

Degradação de poluentes emergentes por processos Fenton e foto-Fenton

A continuous photochemical treatment system was developed for aiming the treatment of aqueous solutions containing relevant micro-pollutants (microcystin-LR, sulfamethoxazole and 17-b estradiol). The continuous photo-Fenton process provided high degradation efficiency. However, contact time between samples and the irradiated region is short relative to total treatment time, indicating that observed changes are predominantly due to the Fenton process. Higher degradation efficiency was observed in systems operated using two treatment cycles, the first involving a batch Fenton process and the second a continuous photo-Fenton treatment.

Avaliação do transporte do ácido 2,4-diclorofenoxiacético através de um lisímetro

The objective of this study was to evaluate the transport of one of the most toxic and best-selling herbicides in Brazil. The active ingredient 2,4-dichlorophenoxyacetic acid (2,4-D) was applied onto the surface of a tank-type lysimeter, filled with undisturbed soil, in Curitiba, Parana State. Samples of infiltration and runoff water were obtained during rain simulations. The concentrations of the active ingredient 2,4-D showed a rapid decrease in the environment, with mass losses of 29.12% by infiltration and 0.87% by runoff.

APLICAÇÃO DE ÓXIDOS DE FERRO NANOESTRUTURADOS COMO ADSORVENTES E FOTOCATALISADORES NA REMOÇÃO DE POLUENTES DE ÁGUAS RESIDUAIS

New techniques for treating wastewater, particularly the removal or degradation of organic pollutants and heavy metals, among other pollutants, have been extensively studied. The use of nanostructured iron oxides as adsorbent and photocatalyst for the removal of these contaminants has proved a promising approach, not only because of their high treatment efficiency, but also for their cost-effectiveness, having the flexibility for in situ and ex situ applications. In this review, we briefly introduced the most used kinds of iron oxide nanoparticles, some synthesis techniques for iron oxide nanostructure formation, their potential benefits in environmental clean-up, and their recent advances and applications in wastewater treatment. These advances range from the direct applications of synthesized nanoparticles as adsorbents for removing toxic contaminants or as catalysts to oxidize and break down noxious contaminants (including bacteria and viruses) in wastewater, to integrating nanoparticles into conventional treatment technologies, such as composite photocatalytic filters (membranes, sand and ceramic) that combine separation technology with photocatalytic activity. Finally, the impact of nanoparticles on the environment and human health is briefly discussed.

O efeito da complexidade estrutural da fonte de nitrogênio no transporte de amônio em Saccharomyces cerevisiae

O estudo do efeito da complexidade estrutural da fonte de nitrogênio no transporte de amônio em Saccharomyces cerevisiae foi realizado cultivando-se o microrganismo em um meio mínimo contendo glicose e fontes de nitrogênio, variando de um simples sal de amônio (sulfato de amônio) a aminoácidos livres (casaminoácidos) e peptídeos (peptona). O transporte de amônio foi avaliado acompanhando-se a entrada do análogo metilamônio, utilizando duas metodologias diferentes: transporte de metilamônio radioativo e efluxo de potássio acoplado ao transporte de metilamônio em células crescidas em diferentes condições de cultivo. A cinética de transporte de amônio é detectada nos meios contendo peptona e amônio e não no meio suplementado com casaminoácidos, e o transporte medido em diferentes fases de crescimento sugere que o processo é mais estável em células crescidas em peptona. Os resultados descritos neste trabalho indicam que a complexidade estrutural interfere com a expressão do transportador do íon amônio e que a complementação do meio de cultura com uma fonte de nitrogênio na forma de peptídeos é a mais eficiente não só para a expressão do transportador de amônio, mas também de conferir maior estabilidade ao processo.

Aplicação de material zeolítico sintetizado de cinzas de carvão como adsorvente de poluentes em água

Cinzas leve de carvão tratadas pelo método hidrotérmico foram usadas como adsorvente de baixo custo para a remoção de íons metálicos e corante de solução aquosa. As isotermas de adsorção das cinzas leve tratadas foram estudadas e os resultados foram ajustados pelos modelos de Langmuir e Freundlich. A isoterma de Freundlich descreveu melhor o processo de adsorção do azul de metileno. Os dados de equilíbrio para a adsorção dos íons zinco e cádmio se ajustaram melhor á equação de Langmuir. O valor máximo de capacidade de adsorção obtido foi de 0,78 (mg g-1)(L mg)1/n para o azul de metileno, 38,1 mg g-1 para o Zn2+ e 67, 5 mg g-1 para o Cd2+. Os materiais sintetizados exibiram capacidades de adsorção muito maiores do que as das cinzas leves usadas como matéria-prima. O estudo mostrou que o material zeólitico pode efetivamente adsorver azul de metileno e íons metálicos com eficiências de remoção na faixa de 82-99%.

Uso de informações obtidas no transporte de madeira e no inventário florestal para estimar o volume em esteréos

O objetivo deste trabalho foi desenvolver uma metodologia para estimação do volume em estéreos sem uma amostragem prévia do empilhamento das toras. Os dados necessários são provenientes do inventário florestal e do transporte da madeira. Foi adotado o "método dos espaços vazios" para ilustrar o emprego das informações supracitadas. Foram utilizados dados de 91 parcelas de inventário pré-corte e de transporte do volume de um plantio de híbrido Eucalyptus grandis x Eucalyptus urophylla, com uma área de 243,1 ha. As equações geradas para estimar o volume em estéreos resultaram em um erro de -0,76% ou -2,34 st/ha para a equação advinda de deduções do método dos espaços vazios e de 4,54% ou 11,61 st/ha para a equação gerada com o emprego do modelo de taper de Demaerschalk. Estes resultados evidenciam que a metodologia apresentada gera resultados promissores, permitindo utilizar informações representativas da situação de uso da unidade estéreos.