Effect of different surface roughnesses on a turbulent boundary layer

The classical treatment of rough wall turbulent boundary layers consists in determining the effect the roughness has on the mean velocity profile. This effect is usually described in terms of the roughness function delta U+. The general implication is that different roughness geometries with the same delta U+ will have similar turbulence characteristics, at least at a sufficient distance from the roughness elements. Measurements over two different surface geometries (a mesh roughness and spanwise circular rods regularly spaced in the streamwise direction) with nominally the same delta U+ indicate significant differences in the Reynolds stresses, especially those involving the wall-normal velocity fluctuation, over the outer region. The differences are such that the Reynolds stress anisotropy is smaller over the mesh roughness than the rod roughness. The Reynolds stress anisotropy is largest for a smooth wall. The small-scale anisotropy and interniittency exhibit much smaller differences when the Taylor microscale Reynolds number and the Kolmogorov-normalized mean shear are nominally the same. There is nonetheless evidence that the small-scale structure over the three-dimensional mesh roughness conforms more closely with isotropy than that over the rod-roughened and smooth walls.

Effect of wave frequency on the nonlinear interaction between Görtler vortices and three-dimensional Tollmien-Schlichting waves

The nonlinear interaction between Görtler vortices (GV) and three-dimensional Tollmien-Schlichting (TS) waves nonlinear interaction is studied with a spatial, nonparallel model based on the Parabolized Stability Equations (PSE). In this investigation the effect of TS wave frequency on the nonlinear interaction is studied. As verified in previous investigations using the same numerical model, the relative amplitudes and growth rates are the dominant parameters in GV/TS wave interaction. In this sense, the wave frequency influence is important in defining the streamwise distance traveled by the disturbances in the unstable region of the stability diagram and in defining the amplification rates that they go through.

Origin of successive cambia on stem in three species of Menispermaceae

The lianas observed in this study, Abuta convexa (Vell.) Diels, Abuta imene (Mart.) Eichler, and Chondrodendron platiphyllum (A. St.-Hil.) Miers, all have successive cambia in their stems. The terminology applied to stem histology in species with successive cambia is as diverse as the interpretations of the origins of this cambial variant. Therefore, this study specifically investigates the origin of successive cambia through a developmental analysis of the above-mentioned species, including an analysis of the terminology used to describe this cambial variation. For the first time, we have identified several developmental stages giving rise to the origins of successive cambia in this family. First, the pericycle originates in 1-3 layers of conjunctive tissue. After the differentiation of the first ring, the conjunctive tissue undergoes new divisions, developing approximately 10 rows of parenchyma cells. In the middle portion, a layer of sclereids is formed, again subdividing the conjunctive tissue into two parts: internal and external. New cambia originate in the internal part, from which new secondary vascular strands will originate, giving rise to the second successive vascular ring of the stem. The external part remains parenchymatous during the installation of the second ring and will undergo new periclinal division, repeating the entire process. New cambia will originate from the neoformed strands, which will form only rays. In the literature, successive cambia are formed by a meristem called "diffuse lateral meristem."However, based on the species of Menispermaceae studied in this report, it is demonstrated that the diffuse lateral meristem is the pericycle itself.

The effect of water stress on seed germination of three terrestrial bromeliads from restinga

Bromeliad seedlings are rarely found on sandy coastal plains (restinga), limited, probably, by stressful conditions and/or specific abiotic requirements for germination. The effect of water stress on rate, time, synchronicity and spreading of germination was evaluated here for three terrestrial bromeliads from the restinga of Maricá using osmotic solutions of polyethyleneglicol 6000 (PEG 6000), from 0.0 to -0.26 MPa for 30 days. Water stress induced by PEG lowered rate and increased time and synchronicity values, besides the number of daily events of bromeliad seed germination, under water potentials between 0.00 to -0.14 MPa. No seeds germinated under water potentials lower than -0.14 MPa. These results reinforce a constant and/or high moisture requirement for bromeliad seeds to germinate. We conclude that bromeliads are not able to act as pioneer plants through germination outside the vegetation islands of the restinga of Maricá, due to the inability of seeds to germinate under lower water potential.

An update on the physiology of two- and three-toed sloths

Physiological and pharmacological research undertaken on sloths during the past 30 years is comprehensively reviewed. This includes the numerous studies carried out upon the respiratory and cardiovascular systems, anesthesia, blood chemistry, neuromuscular responses, the brain and spinal cord, vision, sleeping and waking, water balance and kidney function and reproduction. Similarities and differences between the physiology of sloths and that of other mammals are discussed in detail.

Effect of lung resection and sham surgery on the frequency of infection in alloxan-diabetic rats

The present study was carried out in order to determine the effect of lung resection on the frequency of infections in alloxan-diabetic rats. Adult female Wistar rats were injected with alloxan (40 mg/kg, iv) to induce diabetes mellitus (group D; N = 45) or with vehicle (1.0 ml/kg, iv) to be used as controls (group C; N = 45). Thirty-six days after receiving alloxan both groups were randomly divided into three subgroups: no operation (NO; N = 15), sham operation (SO; N = 15), and left pneumonectomy (PE; N = 15). The rats were sacrificed 36 days after surgery and their lungs were examined microscopically and macroscopically. The occurrence of thoracic wall infection, thoracic wall abscess, lung abscess and pleural empyema was similar in groups D and C. In contrast, the overall infection rate was higher (P<0.05) in the diabetic rats (SO-D and PE-D subgroups, but not in the NO-D subgroup). Considering that the overall infection rate was similar in the SO-D and PE-D subgroups, we suggest that surgery but not pneumonectomy was related to the higher prevalence of infection in diabetic rats.

Effect of three exercise programs on patients with chronic obstructive pulmonary disease

We compared the effect of three different exercise programs on patients with chronic obstructive pulmonary disease including strength training at 50_80% of one-repetition maximum (1-RM) (ST; N = 11), low-intensity general training (LGT; N = 13), or combined training groups (CT; N = 11). Body composition, muscle strength, treadmill endurance test (TEnd), 6-min walk test (6MWT), Saint George's Respiratory Questionnaire (SGRQ), and baseline dyspnea (BDI) were assessed prior to and after the training programs (12 weeks). The training modalities showed similar improvements (P > 0.05) in SGRQ-total (ST = 13 ± 14%; CT = 12 ± 14%; LGT = 11 ± 10%), BDI (ST = 1.8 ± 4; CT = 1.8 ± 3; LGT = 1 ± 2), 6MWT (ST = 43 ± 51 m; CT = 48 ± 50 m; LGT = 31 ± 75 m), and TEnd (ST = 11 ± 20 min; CT = 11 ± 11 min; LGT = 7 ± 5 min). In the ST and CT groups, an additional improvement in 1-RM values was shown (P < 0.05) compared to the LGT group (ST = 10 ± 6 to 57 ± 36 kg; CT = 6 ± 2 to 38 ± 16 kg; LGT = 1 ± 2 to 16 ± 12 kg). The addition of strength training to our current training program increased muscle strength; however, it produced no additional improvement in walking endurance, dyspnea or quality of life. A simple combined training program provides benefits without increasing the duration of the training sessions.

Influence of spray drying operating conditions on microencapsulated rosemary essential oil properties

Spray drying is an important method used by the food industry in the production of microencapsulated flavors to improve handling and dispersion properties. The objective of this study was to evaluate the influence of the process conditions on the properties of rosemary essential oil microencapsulated by spray drying using gum Arabic as encapsulant. The effects of the wall material concentration (10-30%), inlet air temperature (135-195 ºC), and feed flow rate (0.5-1.0 L.h-1) on the moisture content, hygroscopicity, wettability, solubility, bulk and tapped densities, particle density, flowability, and cohesiveness were evaluated using a 2³ central composite rotational experimental design. Moisture content, hygroscopicity and wettability were significantly affected by the three factors analyzed. Bulk density was positively influenced by the wall material concentration and negatively by the inlet air temperature. Particle density was influenced by the wall material concentration and the inlet air temperature variables, both in a negative manner. As for the solubility, tapped density, flowability, and cohesiveness, the models did not fit the data well. The results indicated that moderate wall material concentration (24%), low inlet air temperature (135 ºC), and moderate feed flow rate (0.7 L.h-1) are the best spray drying conditions.