Analysis of the structural and electronic properties of 1-(5-Hydroxymethyl - 4 -[ 5 - (5-oxo-5-piperidin-1-yl-penta-1,3dienyl)-benzo[1,3]dioxol-2-yl] -tetrahydro-furan-2-yl)-5-methyl-1H-pyrimidine-2,4dione molecule

The structural and electronic properties of 1-(5-Hydroxymethyl - 4 -[ 5 - (5-oxo-5-piperidin- 1 -yl-penta- 1,3 -dienyl)-benzo [1,3] dioxol- 2 -yl]-tetrahydro -furan-2 -yl)-5-methy l-1Hpyrimidine-2,4dione (AHE) molecule have been investigated theoretically by performing density functional theory (DFT), and semi empirical molecular orbital calculations. The geometry of the molecule is optimized at the level of Austin Model 1 (AM1), and the electronic properties and relative energies of the molecules have been calculated by density functional theory in the ground state. The resultant dipole moment of the AHE molecule is about 2.6 and 2.3 Debyes by AM1 and DFT methods respectively, This property of AHE makes it an active molecule with its environment, that is AHE molecule may interacts with its environment strongly in solution.

Estimation of standard enthalpy of formation of alkanes in gaseous state by calculating size, structural and electronic parameters in the molecules

A quantitative analysis is made on the correlation ship of thermodynamic property, i.e., standard enthalpy of formation (ΔH fº) with Kier's molecular connectivity index(¹Xv),vander waal's volume (Vw) electrotopological state index (E) and refractotopological state index (R) in gaseous state of alkanes. The regression analysis reveals a significant linear correlation of standard enthalpy of formation (ΔH fº) with ¹Xv, Vw, E and R. The equations obtained by regression analysis may be used to estimate standard enthalpy of formation (ΔH fº) of alkanes in gaseous state.

Structural aspects and floristic similarity among tropical dry forest fragments with different management histories in northern Minas Gerais, Brazil

In order to produce useful knowledge to the initiatives of protection and management of forest fragments, more specifically for tropical dry forests which suffer with frequent anthropic activities, and due to the lack of specific studies, this article aimed describe the structure and the floristic similarity among three areas of dry forest with different management histories. The study was developed in Capitão Enéas municipality, Northern Minas Gerais, Brazil, where three fragments were evaluated, being one in regeneration for 30 years, another submitted to occasional fire and the third with selective cut in small scale. The sampling was developed through the point quarter method considering all the alive phanerophyte individuals with circumference at breast height (CBH) > 15 cm. In the three fragments, 512 individuals, distributed in 60 species, 47 genera, and 23 families were sampled. The most representative families were Fabaceae (26), Anacardiaceae (4), Bignoniaceae (3) and Combretaceae (3). However, fourteen families were represented by only one species. Only eight species were common to all fragments - Myracrodruon urundeuva standed out with 26.9% of all sampled individuals - while a great number of species were exclusive of each fragment. The floristic and structural differences between the fragments are possibly related to the history and intensity of management in each area besides the topography variations and the presence or absence of limestone outcrops. These results show the importance of each fragment, indicating that the loss of anyone would cause negative impacts on the regional flora and consequently to the associated biodiversity.

STRUCTURAL LEAF CHANGES IN TREES AROUND A SUBWAY AIR DUCT

ABSTRACTWhile a number of papers have shown that subway systems have an impact on the air quality through the release of particulate matters, no information about the impact of such particles on tree attributes is available. Tree leaves from three different species from the exit side of a subway station in Rio de Janeiro, Brazil, were more asymmetrical than leaves from the entrance side. This leaves also presenting changes in leaves cuticle and chlorophyll content.

PHYTOSOCIOLOGY AND STRUCTURAL CHARACTERIZATION OF WOODY REGENERATION FROM A REFORESTATION WITH NATIVE SPECIES IN SOUTHEASTERN BRAZIL

ABSTRACT In Brazil, specifically in São Paulo State, there are guidelines based on the high diversity of tropical forests that instructs the restoration projects in the state (current SMA 32/2014). The main goal of this study was verify the importance and effectiveness of the high diversity of arboreal species originated from a reforestation, and its influence in a woody regenerating composition. We developed a phytosociologic study in a woody regenerating stratum of a nine year old reforestation at a Private Reserve of Natural Heritage (RPPN), in Mogi-Guaçu, São Paulo State. All specimens with height > 30 cm and Diameter at Breast Height (DBH) < 5 cm were evaluated. The woody regenerating diversity was smaller than the overstory diversity and the species composition was similar to the overstory. The Simpson index (1-D) was 0.85, Shannon index (H') was 2.46 and the Pielou index (J') was 0.60. The zoochoric dispersion syndrome was major among the species. Our results suggest that the use of high diversity of native seedlings in a reforestation leads to high diversity of species in woody regeneration stratum, after one decade of planting.

Numerical evaluation of the modulus of longitudinal elasticity in structural round timber elements of the Eucalyptus genus

Currently, the standards that deal with the determination of the properties of rigidity and strength for structural round timber elements do not take in consideration in their calculations and mathematical models the influence of the existing irregularities in the geometry of these elements. This study has as objective to determine the effective value of the modulus of longitudinal elasticity for structural round timber pieces of the Eucalyptus citriodora genus by a technique of optimization allied to the Inverse Analysis Method, to the Finite Element Method and the Least Square Method.

The position effect of structural Eucalyptus round timber on the flexural modulus of elasticity

Round timber has great use in civil construction, performing the function of beams, columns, foundations, poles for power distribution among others, with the advantage of not being processed, such as lumber. The structural design of round timber requires determining the elastic properties, mainly the modulus of elasticity. The Brazilian standards responsible for the stiffness and strength determination of round timber are in effect for over twenty years with no technical review. Round timber, for generally present an axis with non-zero curvature according to the position of the element in the bending test, may exhibit different values of modulus of elasticity. This study aims to analyze the position effect of Eucalyptus grandis round timber on the flexural modulus of elasticity. The three-point bending test was evaluated in two different positions based on the longitudinal rotation of the round timber element. The results revealed that at least two different positions of the round timber element are desired to obtain significant modulus of elasticity.

Alternative methodology for calculating the modulus of elasticity of wooden beams of structural dimensions

This study aims to present an alternative calculation methodology based on the Least Squares Method for determining the modulus of elasticity in bending wooden beams of structural dimensions. The equations developed require knowledge of three or five points measured in displacements along the piece, allowing greater reliability on the response variable, using the statistical bending test at three points and non-destructively, resulting from imposition of measures from small displacements L/300 and L/200, the largest being stipulated by the Brazilian norm NBR 7190:1997. The woods tested were Angico, Cumaru, Garapa and Jatoba. Besides obtaining the modulus of elasticity through the alternative methodology proposed, these were also obtained employing the Brazilian norm NBR 7190:1997, adapted to the condition of non-destructive testing (small displacements) and for pieces of structural dimensions. The results of the modulus of elasticity of the four species of wood according to both calculation approaches used proved to be equivalent, implying the good approximation provided by the methodology of calculation adapted from the Brazilian norm.

A importância do anel de silicone na derivação gástrica em Y-de-ROUX para o tratamento da obesidade

OBJETIVO: Analisaram prospectivamente pacientes obesos submetidos à derivação gástrica em y-de-roux com anel de silicone de diferentes tamanhos. MÉTODO: Os pacientes foram acompanhados durante cinco anos e através de exame endoscópico foram classificados em dois Grupos: anel com diâmetro interno até 10 mm (184 pacientes) e anel com diâmetro interno maior que 10 mm (107pacientes). Foi mensurada a porcentagem de perda do excesso de peso com um, dois e cinco anos de pós-operatório, e comparados os grupos entre si em cada ano da coleta dos dados. RESULTADOS: Houve maior emagrecimento no grupo com anel de diâmetro interno até 10 mm. A análise estatística mostrou que houve significância comparando-se os dois grupos entre si, um, dois e cinco anos após a cirurgia, sendo o emagrecimento sempre maior no grupo com anel de menor diâmetro. Não houve diferença estatisticamente significante ao se comparar outros dados da amostra como idade, sexo e IMC. CONCLUSÃO: A restrição determinada pelo anel aumenta a porcentagem de perda do excesso de peso.

Retalhos tubulares de pele de ratos com dois tipos de cateter de silicone

OBJETIVO: Avaliar o processo inflamatório e a fibrose em retalhos tubulares confeccionados na pele do dorso de ratos Wistar, moldados com cateteres de silicone com diferenças de resistência à compressão diametral. MÉTODO: Vinte ratos Wistar foram submetidos à confecção de três retalhos tubulizados de pele em região dorsal. Um retalho não foi moldado e os outros dois receberam, respectivamente, como molde interno, durante um período de sete dias, cateteres de silicone com diâmetros iguais e diferentes resistências à compressão diametral. Os animais foram divididos em dois grupos e sacrificados, respectivamente, no sétimo e vigésimo primeiro dia após a cirurgia. Realizou-se estudo histopatológico para a avaliação da fibrose e do processo inflamatório. RESULTADOS: Não foram encontradas diferenças significativas quanto à presença de fibrose ou processo inflamatório entre os três grupos estudados. CONCLUSÃO: A presença do cateter de silicone, independente de sua resistência à compressão diametral, não aumentou a intensidade da reação inflamatória e da fibrose nas margens suturadas de retalhos tubulares da pele de ratos Wistar.

Complicações locais após a injeção de silicone líquido industrial: série de casos

OBJETIVO: analisar uma série de casos de pacientes submetidos à injeção de silicone líquido industrial de maneira clandestina e por pessoas não habilitadas. MÉTODOS: análise retrospectiva de prontuários de pacientes atendidos no período de setembro de 2003 a dezembro de 2010. Foram avaliados: sexo, idade, local e volume de silicone injetado, tempo decorrido entre a aplicação e as manifestações clínicas, complicações, tratamento e evolução. Definiu-se como precoce as manifestações ocorridas até 30 dias da injeção e manifestações tardias após este período. RESULTADOS: Foram atendidos 12 pacientes, oito eram do sexo masculino, sendo sete transexuais. O volume injetado variou de 5ml a 2000ml, sendo desconhecido em três casos. Os locais mais frequentemente utilizados para injeção foram a região de coxas e glúteos. Oito casos apresentaram manifestações precoces, com quadros de inflamação e/ou infecção. Foi necessária a realização de desbridamento cirúrgico em cinco casos. Três pacientes com histórico de injeção na região mamária foram submetidas à adenomastectomia. Houve um óbito por quadro de choque séptico refratário. CONCLUSÃO: O uso do silicone líquido industrial deve ser totalmente contraindicado como material de preenchimento e modificação do contorno corporal, podendo apresentar graves complicações e até mesmo óbito.

Development and evaluation of a recombinant DNA vaccine candidate expressing porcine circovirus 2 structural protein

Porcine circovirus 2 (PCV2) is generally associated with the porcine circovirosis syndrome, which is considered an important disease of swine and has potentially serious economic impact on the swine industry worldwide. This article describes the construction of a recombinant plasmid expressing the PCV2 structural protein and the evaluation of cellular and humoral immune responses produced by this recombinant vaccine in BALB/c mice. The vaccine candidate was obtained and analyzed in vivo, in an effort to determine the ability to induce a specific immune response in mice. DNA was extracted from a Brazilian PCV2 isolate and the gene coding for Cap protein was amplified by PCR and inserted into an expression plasmid. Groups of BALB/c mice were inoculated intra-muscularly and intradermally in a 15-day interval, with 100 µg and 50 µg of the vaccine construct, respectively. Another group was inoculated intramuscularly with 100 µg of empty plasmid, corresponding to the control group. Seroconversion and cellular response in BALB/c mice were compared and used for vaccine evaluation. Seroconversion was analyzed by ELISA. After a series of 3 immunizations the spleen cells of the immunized animals were used to perform lymphocyte proliferation assays. Seroconversion to PCV2 was detected by ELISA in the animals inoculated with the vaccine construct when compared with control groups. Lymphocyte proliferation assays showed a stronger cell proliferation in the inoculated animals compared with the control group. Thus, the vaccine candidate construct demonstrated to be able to induce both humoral and cellular responses in inoculated mice.

A frequency-domain pseudo-force method for dynamic structural analysis nonlinear systems and nonproportional damping

A frequency-domain method for nonlinear analysis of structural systems with viscous, hysteretic, nonproportional and frequency-dependent damping is presented. The nonlinear effects and nonproportional damping are considered through pseudo-force terms. The modal coordinates uncoupled equations are iteratively solved. The treatment of initial conditions in the frequency domain which is necessary for the treatment of the uncoupled equations is initially adressed.

Object-oriented Programming Applied to the Development of Structural Analysis and Optimization Software

This paper presents the development of a two-dimensional interactive software environment for structural analysis and optimization based on object-oriented programming using the C++ language. The main feature of the software is the effective integration of several computational tools into graphical user interfaces implemented in the Windows-98 and Windows-NT operating systems. The interfaces simplify data specification in the simulation and optimization of two-dimensional linear elastic problems. NURBS have been used in the software modules to represent geometric and graphical data. Extensions to the analysis of three-dimensional problems have been implemented and are also discussed in this paper.