461 resultados para Sociedade Técnica
Resumo:
Este trabalho foi realizado no Escritório de Desenvolvimento Rural - Jales, região noroeste do Estado de São Paulo, com o objetivo de efetuar um levantamento do potencial da cultura da banana 'Maçã' na região, determinando-se indicadores técnicos e econômicos de dois sistemas de produção, os quais utilizam, no plantio, mudas micropropagadas e convencional. O levantamento de dados necessários à realização da pesquisa nos aspectos ligados à elaboração das matrizes de coeficientes técnicos, base para estimativas de custos de produção, foi obtido diretamente junto a produtores da região, e a metodologia de custos foi baseada no custo total de produção. Os resultados econômicos mostraram-se satisfatórios na região para os dois sistemas de produção, mas a receita líquida obtida com a utilização de mudas micropropagadas foi 34% maior que a obtida no sistema convencional.
Resumo:
Objetivou-se estimar os custos de produção e lucratividade do caju in natura na Regional de Jales, noroeste do Estado de São Paulo. Os dados foram levantados junto a produtores, a partir da aplicação de questionário e da elaboração de planilhas, para caracterizar todo o processo produtivo e realizar análise econômica. A produção de fruta para mesa exige um sistema de cultivo mais intensivo, principalmente no controle de pragas e doenças; por sua vez, eleva o custo de produção que, via de regra, é compensada pelos preços alcançados. Os custos de produção são altos, mas o que deve ser destacada é a participação relativa das embalagens que pode chegar a um terço do custo operacional efetivo, seguido pelos custos pós-colheita. Os indicadores de lucratividade mostram que a produção de caju é rentável nesta região, e o índice de lucratividade foi de 46,50%.
Resumo:
Considerada praga-chave da cultura da goiaba, Conotrachelus psidii Marshall (Coleoptera: Curculionidae) tem causado grandes prejuízos em vários países produtores desta fruta. A pesquisa objetivou avaliar os parâmetros biológicos da praga, sob condições controladas, através do desenvolvimento de uma técnica de criação que permitiu efetuar observações diárias de pré-pupas e pupas. Constatou-se que o substrato adequado para manutenção dessas fases foi o solo argiloso umedecido com viabilidade de 78%, sendo este o tipo de solo utilizado na técnica de criação, que foi desenvolvida para trabalhos em câmara climatizada, à temperatura constante de 25 ± 1º C, fotoperíodo de 12 horas e UR de 70% ± 10%. Quanto aos aspectos biológicos, a duração média do período de ovo, larva, pré-pupa, pupa e ovo-pupa foi de: 4,25; 12,2; 106,6; 14,88 e 138,4 dias, respectivamente. A duração média do período da fase adulta, no solo, início da alimentação, pré-oviposição, longevidade e pós-oviposição foi de, 22; 11; 51,9; 149,32 e 7,18 dias, respectivamente. O período médio de oviposição foi de 120,27 dias, com um número médio de 343,63 ovos por fêmea. A técnica de criação desenvolvida permitiu acompanhar diariamente o desenvolvimento de pré-pupas, pupas e adultos do gorgulho-da-goiaba, sem que eles necessitassem reconstruir nova câmara, mostrando ser menos estressante e onerosa do ponto de vista energético.
Resumo:
A Agricultura de Precisão (AP) permite a utilização de diferentes ferramentas na obtenção de informações, e estas otimizam a tomada de decisão por parte do produtor, impactando positivamente na receita final. O objetivo do trabalho foi verificar o comportamento das variáveis produção (PROD), volume de copa (VC) e diâmetro de caule (DC) da variedade Maxi Gala com a utilização da técnica da cokrigagem. O experimento foi conduzido em uma área de 0,90 hectare de produção comercial da variedade Maxi Gala, na Fazenda São Paulino, da empresa RASIP, em Vacaria-RS, apresentando como coordenadas geográficas 28º31’17” de latitude sul e 50º49’17” de longitude oeste, durante as safras de 2010/2011 e 2011/2012. Coletaram-se 75 amostras para cada variável, em uma malha de 12 m na entrelinha e 10 m na linha. As variáveis avaliadas foram produção por planta , volume de copa e diâmetro de caule. Foram feitas a análise estatística descritiva dos dados e a análise espacial através dos semivariogramas. De posse dos modelos ajustados, realizou-se a interpolação pelo método da krigagem. Após, foi realizada a correlação simples dos parâmetros e elaborado os semivariogramas cruzados para interpolação, pela técnica da cokrigagem. Os parâmetros PROD versus DCapresentaram média correlação na variedade Maxi Gala, na safra de 2011. Nas safras de 2011 e 2012, os parâmetros VC versus DC também apresentaram média correlação. A técnica da cokrigagem pode ser uma ferramenta daAP a ser utilizada pela cultura da macieira no levantamento de informações.Verificou-se que houve resposta e redução na coleta de amostras das variáveis mais difíceis; na safra de 2011, reduziu-se a coleta de 15 amostras da PROD, e na safra de 2012, reduziu-se a coleta de 20 amostras do VC.
Resumo:
This paper describes the theoretical basis and the experimental requirements for the application of the Taylor dispersion technique for measurements of diffusion coefficients in liquids, emphasizing its simplicity and accuracy in comparison to other usual techniques. Some examples are discussed describing the use of this methodology on studies of solute-solvent interactions, solute aggregation, solute partitioning into macromolecular systems and on the assessment of nanoparticles sizes.
Resumo:
A brief discussion of the non-chromatographic continuous separation techniques is presented emphasizing the pervaporation process. It makes interesting choices for implementing various preliminary operations of the analytical process in order to accommodate the raw sample to the measuring instrument. Discussions include the perceived advantages and disadvantages, the underlying principles of pervaporation process, the flexible module and fields of application.
Resumo:
This review presents some characteristics related to slurry sampling in trace analysis in terms of its advantages, limitations and applications, as well as the latest advance in this area, such as mechanization, chemical modifiers, stabilization agents and others. The reviewed applications include foods, biological and geological materials.
Resumo:
The solution fluorescence of N-alkyl-2,3-naphthalimides (1-4) in polar protic and aprotic solvents was compared to the emission from solid samples resulting from the imide complexation with b-cyclodextrin or adsorption on the surface of microcrystalline cellulose. Solid samples of the inclusion complex 2,3-naphthalimides/b-cyclodextrin show maximum for fluorescence emission significantly different to the observed in methanolic solution. Beside this, a clear effect on the alkyl chain length could be observed for these samples which is probably due to differences in probe location inside the cyclodextrin cavity. The constancy for fluorescence quantum yield and fluorescence lifetime for the imides 1 - 4 adsorbed on microcrystalline cellulose suggests that, independently of the polarity of the solvent used for sample preparation, the probe is preferentially located on the cellulose surface. An increase of fluorescence quantum yield and fluorescence lifetime for solid samples, when compared to the values obtained in solution for the different solvents employed in this study (acetonitrile, methanol and water), is fully in accordance with a decrease of the probe mobility due to inclusion in b-cyclodextrin or to adsorption on cellulose.
Resumo:
In this work we first introduce the reader to the basic concepts of biology, bioenergetics and biochemistry, concerning the area of cell biology. Then we explain what diauxism is and an example of this phenomenon, applied to S. cerevisiae, is presented. Finally, thermograms obtained by microcalorimetry, from S. cerevisiae that undergo diauxism, are discussed from a biochemical point of view.
Resumo:
The combination of cyclic voltammetry and on line mass spectrometry, called differential electrochemical mass spectrometry (DEMS), is already a well established method for on line identification and quantitative detection of the products and intermediates of electrochemical reactions. This article aims to show the principles of the method and how this technique have been used to study electrochemical problems such the electrocatalytic oxidation of organic molecules, as methanol and ethanol, at noble metal electrodes.
Resumo:
The self-assembly technique is a powerful tool to fabricate ultrathin films from organic compounds aiming at technological applications in molecular electronics. This relatively new approach allows molecularly flat films to be obtained on a simple and cheap fashion from various types of material, including polyelectrolytes, conducting polymers, dyes and proteins. The resulting multilayer films may be fabricated according to specific requirements since their structural and physical properties may be controlled at the molecular level. In this review we shall comment upon the evolution of preparation methods for ultrathin films, the process of adsorption and their main properties, as well as some examples of technological applications of layer-by-layer or self-assembled films.
Resumo:
A differential pulse polarographic study with the objective to determine iron (III) in presense of copper (II) in a supporting electrolyte based on citrate - EDTA was made. The best experimental conditions found were a supporting electrolyte of citrate 0.25 mol L-1, EDTA 0.050 mol L-1 and KNO3 0.50 mol L-1, pH 5.00. In this media iron (III) showed a polarographic peak in -0.08 V and the copper (II) in -0.34 V, both vs. Ag/AgCl (saturated KCl). Thus, a analytical method was developed and applied to determine iron (III) in brass alloy, a matrix were copper is in large excess over iron. The results obtained showed no interference of copper in the iron determination. The value of 0.21% of iron in the sample alloy composition was obtained and the method was validated by atomic absortion and recovery test, and the results exhibited a good agreement with the proposed method.
Resumo:
This review focus the more relevant foundations and applications of the Metallo-Organic Decomposition (MOD) technique, mainly within the last decade. The technique has grown significantly, mainly due to the good results concerning the preparation of multicomponent oxide systems with composition, structural and morphologic control, in a relatively simple way. This opened new opportunities to obtain materials with well-defined electrical and optical properties.
Resumo:
This paper describes an experimental design technique, known as variables search, developed to expose the critical variables and screen out the irrelevant ones. It is easy to learn and use and clearly dissociates the main and interactions effects from each other. An example of air separation process by pressure swing adsorption was used to demonstrate how the variables search technique works. The phases of identification of the critical variables is shown, step by step,.
Resumo:
Diffusion coefficients provide uniquely detailed and easily interpreted information on molecular organization and phase structure. They are quite sensitive to structural changes, and to binding and association phenomena, in particular for liquid colloidal or macromolecular systems. This paper describes the principles of diffusion measurements in liquids by pulsed magnetic field gradient spin-echo (PFG-SE) NMR spectroscopy. The important PFG-SE technique known as DOSY is presented and discussed. This is a noninvasive technique that can provide individual multicomponent translational diffusion coefficients with good precision in a few minutes, without the need for radioactive isotopic labelling.