Critical-point yield model to estimate yield damage caused by Cercospora zea-maydis in corn

A model to estimate damage caused by gray leaf spot of corn (Cercospora zea-maydis) was developed from experimental field data gathered during the summer seasons of 2000/01 and during the second crop season [January-seedtime] of 2001, in the southwest of Goiás state. Three corn hybrids were grown over two seasons and on two sites, resulting in 12 experimental plots. A disease intensity gradient (lesions per leaf) was generated through application, three times over the season, of five different doses of the fungicide propiconazol. From tasseling onward, disease intensity on the ear leaf (El), and El - 1, El - 2, El + 1, and El + 2, was evaluated weekly. A manual harvest at the physiological ripening stage was followed by grain drying and cleaning. Finally, grain yield in kg.ha-1 was estimated. Regression analysis, performed between grain yield and all combinations of the number of lesions on each leaf type, generated thirty linear equations representing the damage function. To estimate losses caused by different disease intensities at different corn growth stages, these models should first be validated. Damage coefficients may be used in determining the economic damage threshold.

Damage quantification and reaction of bean genotypes (Phaseolus vulgaris L.) to Meloidogyne incognita race 3 and M. javanica

The damage and the resistance levels of cultivars and accessions of common beans rescued in the South and mountain regions of Espírito Santo State, Brazil, to M. incognita race 3 and M. javanica parasitism were evaluated under a greenhouse. Four rescued bean genotypes ("FORT-10", "FORT-13", "FORT-16" and "FORT-19") and 2 commercial cultivars: "Pérola", and "Aporé", were tested. The cultivar "Rico-23" was included as standard of susceptibility to nematodes and non-inoculated plants constituted the control. Thus, the experiment was carried out in a completely randomized design in 3 (treatments considering nematodes) x 7 (genotypes and bean cultivars) factorial arrangement, with 7 replicates. Data were measured at 50 days after plant inoculation. For damage quantification, the following variables were evaluated: plant height (PHE), number of nodes (NNO), number of trifoliate leaves (NRT), fresh matter weight (FWE) and dry matter weight (DWE) of shoots, root weight (RWE), number of root nodules (NRO) and final population (FPO) of nematodes per root system. There were no significant differences between the effects caused by M. incognita and M. javanica, but both species showed inferior values of PHE, NNO, NRT, RWE, FWE and DWE compared to controls. Concerning the levels of resistance of bean plants to M. incognita, the genotypes "FORT-10", "FORT-13", "Aporé" and "FORT-16" behaved as moderately resistant, the cultivars "Rico 23" and "Pérola" low resistant, and the genotype "FORT-19" as highly susceptible. When parasitized by M. javanica, the beans "FORT-19", "Rico-23", "FORT-16" and "FORT-13" were low resistant, "Pérola" and "Aporé" susceptible and "FORT-10" highly susceptible.

Detection of beetle damage in forests by X-ray CT image processing

Some beetle species can have devastating economic impacts on forest and nursery industries. A recent example is Anophophora glabripennis, a species of beetle known in the United States as the ''Asian Longhorrned beetle'', which has damaged many American forests, and is a threat which can unintentionally reach south American countries, including Brazil. This work presents a new method based on X-ray computerized tomography (CT) and image processing for beetle injury detection in forests. Its results show a set of images with correct identification of the location of beetles in living trees as well as damage evaluation with time.

Pisolithus sp. tolerance to glyphosate and isoxaflutole in vitro

The ectomycorrhizal fungi have different tolerance to herbicides and may promote the survival and growth of the eucalypts tree. This study aimed to evaluate the tolerance of Pisolithus sp. isolates to glyphosate and isoxaflutole. The isolates evaluated were D3, D16, D17, Pt24 and UFVJM04. Glyphosate concentrations were: 0, 32, 63, 127 and 254 mg L-1 in liquid medium; 0, 32, 63, 127, 254, 507 and 1014 mg L-1 in solid medium. For isoxaflutole, the concentrations were 0, 295, 589, 1178 and 2355 mg L-1 for both media. Assays were independent for each herbicide and culture medium. The tolerance of isolates depended on the herbicide and its concentration in each type of culture medium. Pt24 was the most tolerant to glyphosate and the UFVJM04 to isoxaflutole. Glyphosate was more toxic to isolates of Pisolithus than isoxaflutole.

Efficiency of distinct data mining algorithms for classifying stress level in piglets from their vocalization

Among the challenges of pig farming in today's competitive market, there is factor of the product traceability that ensures, among many points, animal welfare. Vocalization is a valuable tool to identify situations of stress in pigs, and it can be used in welfare records for traceability. The objective of this work was to identify stress in piglets using vocalization, calling this stress on three levels: no stress, moderate stress, and acute stress. An experiment was conducted on a commercial farm in the municipality of Holambra, São Paulo State , where vocalizations of twenty piglets were recorded during the castration procedure, and separated into two groups: without anesthesia and local anesthesia with lidocaine base. For the recording of acoustic signals, a unidirectional microphone was connected to a digital recorder, in which signals were digitized at a frequency of 44,100 Hz. For evaluation of sound signals, Praat® software was used, and different data mining algorithms were applied using Weka® software. The selection of attributes improved model accuracy, and the best attribute selection was used by applying Wrapper method, while the best classification algorithms were the k-NN and Naive Bayes. According to the results, it was possible to classify the level of stress in pigs through their vocalization.

Mechanical damage during harvest and loading affect orange postharvest quality

Brazil is the world’s largest orange producer; however, part of this production is lost during postharvest. This loss can be minimized by controlling incidence of physical damage throughout the harvest and loading operations. Impacts can negatively modify quantitative and qualitative fruits aspects. The main goal of this study was to measure the impact magnitude in two types of harvest (manual and detachment) and during all steps from picking into bags until loading for transport to the processing industry and additionally evaluating, in laboratory, the physico-chemical quality of the fruit subjected to various impacts, similar to those found in the field. In order to evaluate the impact magnitude, an instrumented sphere was used (760 mm, Techmark, Inc, USA). The following physico-chemical parameters were evaluated during 6-days of storage: weight loss, soluble solids contents, titratable acidity, ascorbic acid content, pH, firmness and peel color. The greatest impacts were observed during harvest, during the detachment practice, and when loading and unloading from bulk storage, with average acceleration values between 249.5 and 531.52G. The impact incidence in oranges were responsible for reducing the soluble solids, titratable acidity, ascorbic acid and weight by to 5.5%; 8.7%; 4.6% and 0.5%, respectively, compared to the control. Impacts during harvest and the various pre-industry manipulation steps must be controlled as they interfere in postharvest quality and physiology of ‘Valência’ oranges.

Damage control surgery: it's evolution over the last 20 years

In less than twenty years, what began as a concept for the treatment of exsanguinating truncal trauma patients has become the primary treatment model for numerous emergent, life threatening surgical conditions incapable of tolerating traditional methods. Its core concepts are relative straightforward and simple in nature: first, proper identification of the patient who is in need of following this paradigm; second, truncation of the initial surgical procedure to the minimal necessary operation; third, aggressive, focused resuscitation in the intensive care unit; fourth, definitive care only once the patient is optimized to tolerate the procedure. These simple underlying principles can be molded to a variety of emergencies, from its original application in combined major vascular and visceral trauma to the septic abdomen and orthopedics. A host of new resuscitation strategies and technologies have been developed over the past two decades, from permissive hypotension and damage control resuscitation to advanced ventilators and hemostatic agents, which have allowed for a more focused resuscitation, allowing some of the morbidity of this model to be reduced. The combination of the simple, malleable paradigm along with better understanding of resuscitation has proven to be a potent blend. As such, what was once an almost lethal injury (combined vascular and visceral injury) has become a survivable one.

AT1-receptor mediated vascular damage in myocardium, kidneys and liver in rats

The systemic aspect of vascular damage induced by angiotensin II (ANG II) has been poorly explored in the literature. Considering the presence of ANG II and its specific receptor AT1, in several organs, all tissues might be potentially affected by its effects. The aims of this study were: To evaluate the early histological changes in the heart, liver and kidneys, produced by ANG II infusion, to evaluate the protective effect of losartan. Wistar rats were distributed into three groups: control (no treatment), treated with ANG II, and treated with ANG II + losartan. ANG II was continuously infused over 72 hours by subcutaneous osmotic pumps. Histological sections of the myocardium, kidneys and liver were stained and observed for the presence of necrosis. There were ANG II-induced perivascular inflammation and necrosis of the arteriolar wall in the myocardium, kidney, and liver by, which were partially prevented by losartan. There was no significant correlation between heart and kidney damage. Tissue lesion severity was lower than that of vascular lesions, without statistical difference between groups. ANG II causes vascular injury in the heart, kidneys and liver, indicating a systemic vasculotoxic effect; the mechanisms of damage/protection vary depending on the target organ; perivascular lesions may occur even when anti-hypertensive doses of losartan are used.

A New Model to Determine the Dispersion of Fatigue Damage Evaluations

Reliable predictions of remaining lives of civil or mechanical structures subjected to fatigue damage are very difficult to be made. In general, fatigue damage is extremely sensitive to the random variations of material mechanical properties, environment and loading. These variations may induce large dispersions when the structural fatigue life has to be predicted. Wirsching (1970) mentions dispersions of the order of 30 to 70 % of the mean calculated life. The presented paper introduces a model to estimate the fatigue damage dispersion based on known statistical distributions of the fatigue parameters (material properties and loading). The model is developed by expanding into Taylor series the set of equations that describe fatigue damage for crack initiation.

An Inspection System to Identify Fatigue Damage on Steel-Bridge Structures

Crack formation and growth in steel bridge structural elements may be due to loading oscillations. The welded elements are liable to internal discontinuities along welded joints and sensible to stress variations. The evaluation of the remaining life of a bridge is needed to make cost-effective decisions regarding inspection, repair, rehabilitation, and replacement. A steel beam model has been proposed to simulate crack openings due to cyclic loads. Two possible alternatives have been considered to model crack propagation, which the initial phase is based on the linear fracture mechanics. Then, the model is extended to take into account the elastoplastic fracture mechanic concepts. The natural frequency changes are directly related to moment of inertia variation and consequently to a reduction in the flexural stiffness of a steel beam. Thus, it is possible to adopt a nondestructive technique during steel bridge inspection to quantify the structure eigenvalue variation that will be used to localize the grown fracture. A damage detection algorithm is developed for the proposed model and the numerical results are compared with the solutions achieved by using another well know computer code.

Tolerance of eucalypt (Eucalyptus spp.) seedlings to imazapyr in nutritive solution

Imazapyr has presented excellent results in controlling coppices in stand reforms of eucalypt forests, despite differences in the efficacy levels. To find out whether these different responses are caused by the genetic variability of the cultivated materials, two experiments were carried out under greenhouse conditions with different imazapyr doses in a hydroponic system in plastic vases containing 2,500 mL solution. The clones IEF-1 (Eucalyptus grandis x Eucalyptus sp. hybrid), GE 463 (E. urophylla x E. grandis), and MN 445 (E. grandis x Eucalyptus sp. hybrid) were used in the first assay, and IEF-1, IEF2 (E. grandis x E. urophylla) x Eucalyptus sp. hybrid) and the clones 129 and 7182 (E. grandis x Eucalyptus sp. hybrids) in the second assay. Thirty days after transplanting the seedlings to a nutritive solution, imazapyr was applied to the solution at doses of 0.00, 0.05, 0.10, 0.20, 0.40, 0.80, 1.60 and 3.20 muL L-1. Clone GE 463 proved to be more tolerant to imazapyr than clones IEF-1 and MN 445 in the first assay; however, in the second, clone 7182 was the most tolerant. Thus, doses should also be differentiated when controlling coppices, according to the cultivated clone.

Tolerance of sugarcane cultivars to chemical eradication

Knowledge of the minimum rate of glyphosate required to eradicate sugarcane ratoons can reduce the amount of herbicide used. To confirm this hypothesis, this study aimed to investigate the tolerance of different sugarcane cultivars to chemical eradication, at different glyphosate rates. The experiment was conducted in a randomized block design in a split-plot scheme, with four replications. The sugarcane cultivars (IACSP94-2094, IACSP94-2101, IACSP93-3046, IACSP94‑4004, IAC86-2480, and RB72454) were allocated in plots and the glyphosate rates (0, 1,440, 2,160, 2,880, 3,600, and 4,320 g ha-1), in the sub plots. The traits evaluated were signs of poisoning symptoms; total chlorophyll content, plant height, percentage of dead tillers, and dry weight of the plants. At 45 days after application (DAA), the glyphosate rate of 1,440 g a.e. ha-1 eradicated the cultivars IACSP94-2094 and IACSP94-2101, as well as RB72454 with application of 2,160 g a.e. ha‑1. Application of glyphosate 2,880 g a.e. ha-1 eradicated both IACSP93-3046 and IAC86-2480 and glyphosate 3,600 g a.e. ha-1 eradicated IACSP94-4004. The most tolerant cultivar was IACSP94‑4004, eradicated at the rate of 3,600 g. a.e. ha-1. This confirms the hypothesis that knowing the cultivar's tolerance leads, in practice, to a smaller amount of herbicide applied to the environment, which also reduces production costs.

Leaf contents of nitrogen and phenolic compounds and their bearing with the herbivore damage to Tibouchina pulchra Cogn. (Melastomataceae), under the influence of air pollutants from industries of Cubatão, São Paulo

The Atlantic Forest on the slopes of Serra do Mar around Cubatão (São Paulo, Brazil) has been affected by massive emissions of pollutants from the local growing industrial complex. The effects of air pollution on the amounts of leaf nitrogen, total soluble phenols and total tannins of Tibouchina pulchra Cogn., a common species in the area of Cubatão, were investigated, as well as the possible influence of the altered parameters on the leaf area damaged by herbivores. Fully expanded leaves were collected at two sites: the valley of Pilões river (VP), characterized by a vegetation virtually not affected by air pollution and taken as a reference; and valley of Mogi river (VM), close to the core region of the industrial complex, and severely affected by air pollution. No differences were observed for any parameters between samples collected in the summer and winter in both sites. On the other hand, compared to VP, individuals growing in VM presented higher amounts of nitrogen and lower amounts of total soluble phenols and total tannins, as well as higher percentages of galls per leaf and higher leaf area lost to herbivores. Regression analysis revealed that the increase in leaf area lost to herbivores can be explained by the increase of the content of nitrogen and decrease in the contents of total soluble phenols and total tannins. Although significant, the coefficients of explanation found were low for all analyses, suggesting that other biotic or abiotic factors are likely to influence leaf attack by herbivores.

The seed coat as a modulator of seed-environment relationships in Fabaceae

The seed coat is one of the main determinants of seed germination, vigor and longevity potentials. It is also intimately associated with temporal and spatial dispersion of seed germination in a large number of plant species. The understanding of its properties and characteristics may explain, anticipate or even allow the modification of seed performance under certain environmental conditions. There is a growing volume of evidence associating seed coat characteristics to specific seed problems. For example, susceptibility to mechanical damage is related to lignin content of the seed coat, while seed longevity and tolerance to field weathering depends on seed coat integrity. Seed performance in many legumes has been associated with certain seed coat structures, such as the hilum, strophiole and micropyle. In soybean, permeability is also related with porosity, color, and cerosity, that affect seed vigor, storage potential, resistance to shrinking and fungi infection, and to susceptibility to imbibition damage. The understanding of these associations is necessary before genetic alterations through breeding for desirable characteristics and is fundamental for the development and improvement of seed pre-sowing treatments, production, handling and quality evaluation procedures, which may ultimately result in reduction of seed quality losses and increase the efficiency of agricultural production systems.

Leaf damage in a mangrove swamp at Sepetiba Bay, Rio de Janeiro, Brazil

Leaf damage to Rhizophora mangle L., Avicennia schaueriana Stapf. & Leechman, and Laguncularia racemosa L. was studied in a two hectare mangrove swamp site in Sepetiba Bay. Seventeen arthropod morphospecies were identified as being responsible for the damage, and their species diversity was highest on A. schaueriana, followed by R. mangle and L. racemosa. Damage in terms of relative area was greatest in L. racemosa. Almost 9% of mangrove canopy leaf area demonstrated some damage. Loss of leaf area to herbivory was 12.1%, 8.3% and 6.2% in L. racemosa, A. schaueriana and R. mangle respectively. L. racemosa and A. schaueriana showed high percentages of leaf-margin damage in terms of the total damaged leaf area (82.2% and 56.3% respectively), while the most important type of damage in R. mangle was necrosis, representing 58.1% of the total damaged leaf area.