Heterosis in papaya: inter and intragroup analysis

Papaya (Carica papaya L.) is a typical crop of tropical areas, and Brazil is one of the leading world producers. In recent decades, papaya culture has expanded to different regions of the country, but the number of cultivars available is still limited. In the present study, a complete diallel cross was carried out using eight accessions of papaya from the UENF/Caliman germplasm bank. Four genotypes belong to the Formosa heterotic group and four, to the Solo group. This study aimed to evaluate the occurrence and viability of exploring heterosis in heterotic intragroup hybrids. Fifty-six hybrid progenies were generated and evaluated. Among the Formosa intragroup hybrids, two hybrid combinations (MR x J4 and MR x SK) showed heterosis for all traits, as well as good average total fruit production. Among the Solo intragroup hybrids, three hybrid combinations (WM x GG, WM x SS and WM x SM) stand out for fruit production and high content of soluble solids. In Formosa x Solo hybrids, all hybrid combinations with the parent JS (JS x WM, JS x GG, JS x SS and JS x SM) showed high fruit quality and good average for fruit production. The heterotic profile of the hybrids tested allowed the identification of promising hybrids within Formosa and Solo heterotic groups. The analysis of the canonical variables also allowed the visualization of distinct groups of hybrids, depending on the provenance of the parents.

Repeatability, correlation and path analysis of physical and chemical characteristics of peach fruits

This study aimed to determine the number of measurements necessary to evaluate physical and chemical characteristics of peach fruits, study the relationships between them and their direct and indirect effects on the content of ascorbic acid and total carotenoids. The characteristics skin and pulp color, fruit weight, suture, equatorial and polar diameters, firmness, soluble solids (SS), titratable acidity (TA), SS/TA ratio, ascorbic acid and total carotenoids were evaluated in 39 cultivars of peach and 3 cultivars of nectarine from the orchard of the Universidade Federal de Viçosa. The repeatability coefficient was estimated by ANOVA and CPCOR. Phenotypic correlation coefficients (rf) were estimated and, after the multicollinearity diagnostics, they were unfolded to direct and indirect effects of the explanatory variables on the response variable using path analysis. There was agreement on the magnitude of repeatability coefficients obtained by the two methods; however, they varied among the 14 characteristics. The highest correlations were found between FW, SD, ED and PD. Seven fruits are sufficient to evaluate the physical and chemical characteristics of peach with a correlation coefficient of 90%. The characteristics considered in the path diagrams (b* skin, hº skin, b* pulp, hº pulp, ED, PD, FIR, SS, SS/AT and TC) are not the main determinants of the ascorbic acid. The yellow hue of the pulp (hº pulp) has the potential to be used in indirect selection for total carotenoids.

GROWTH, YIELD AND POSTHARVEST QUALITY OF WAX APPLE AS AFFECTED BY NAPHTHALENE ACETIC ACID APPLICATION

Results of this study represent the first report of the effect of Naphthalene Acetic Acid (NAA) on the pre and post harvest quality of wax apple fruit. The wax apple trees were spray treated with 0, 5, 10 and 20 mg L-1 NAA under field conditions during 2008 to 2011. The experiments were carried out in Completely Randomized Design (CRD) with six replications. Leaf chlorophyll content, chlorophyll fluorescence, photosynthetic yield, net photosynthetic rate, drymatter content of leaves and total soluble solids and K+content of wax apple fruits were significantly increased after treatments with 10 mg L-1. Polygalacturonase activity significantly decreased with NAA treatments. The application of 5 mg L-1 NAA increased 27% more bud and reduced 42% less fruit drop compared to the control. In addition, higher protein and phosphate synthase activity of leaves, fruit set, fruit growth, larger fruit size and yield were recorded in NAA treated plants. In storage, treated fruits exhibited higher TSS and firmness and less weight loss, browning, titratable acidity, respiration and ethylene production than the control. It is concluded that spraying with 5 and 10 mg L-1 NAA once a week under field conditions produced better fruit growth and yield of the wax apple and maintained better fruit quality in postharvest storage.

Bilateral Killian-Jamieson diverticula demonstrated by videofluoroscopic swallowing study: case report

The authors report the case of a 56-year-old male patient complaining of dysphagia for solids and food impaction, submitted to videofluoroscopic swallowing study that demonstrated the presence of two esophageal diverticula. The videofluoroscopic swallowing study was critical in the identification and diagnosis of the diverticula, an esophageal cause of dysphagia.

Ressonância magnética nuclear de platina-195 em compostos organometálicos

A brief review of 195Pt NMR is presented, focusing organometallic compounds. This article gives initially basic information of NMR processes involving 195Pt nucleus. It is followed by a discussion of the factors which affect the chemical shifts and coupling constants. Finally, some aspects of 195Pt NMR of solids are commented.

Ação promotora do berílio em catalisadores da síntese do estireno

The catalytic dehydrogenation of ethylbenzene in presence of steam is the main commercial route to produce styrene. The industrial catalysts are potassium- and chromia-doped hematite which show low surface areas leading to bad performance and short life. In order to develop catalysts with high areas, the effect of beryllium on the textural properties and on the catalytic performance of this iron oxide was studied. The influence of the amount of the dopant, the starting material and the calcination temperature were also studied. In sample preparations, iron and beryllium salts (nitrate or sulfate) were hydrolyzed with ammonia and then calcinated. The experiments followed a factorial design with two variables in two levels (Fe/Be= 3 and 7; calcination temperature= 500 and 700ºC). Solids without any dopant were also prepared. Samples were characterized by elemental analysis, infrared spectroscopy, surface area and porosity measurements, X-ray diffraction, DSC and TG. The catalysts were tested in a microreactor at 524ºC and 1 atm, by using a mole ratio of steam/ ethylbenzene=10. The selectivity was measured by monitoring styrene, benzene and toluene formation. It was found that the effect of beryllium on the characteristics of hematite and on its catalytic performance depends on the starting material and on the amount of dopant. Surface areas increased due to the dopant as well as the nature of the precursor; samples produced by beryllium sulfate showed higher areas. Beryllium-doped solids showed a higher catalytic activity when compared to pure hematite, but no significant influence of the anion of starting material was noted. It can be concluded that beryllium acts as both textural and structural promoter. Samples with Fe/Be= 3, heated at 500ºC, lead to the highest conversion and were the most selective. However, catalysts prepared from beryllium sulfate are the most promising to ethylbenzene dehydrogenation due to their high surface area which could lead to a longer life.

Cinética não-isotérmica na análise térmica de sólidos

In this work, a computer program called Thermal Kinetics was implemented to simulate thermal analysis experiments by numerical integration of the kinetics equations. The computer program was tested in two different examples: non-isothermal transformation of a Cu-Al alloy and non-isothermal decomposition of calcium oxalate monohydrated. In spite of the rather crude approximations of the model, the simulated profiles are very similar to the experimental curves. Both, the dalpha /dt and the dalpha /dT profiles reproduce the experimental transition temperatures with an error smaller than 25%.

Propriedades texturais e catalíticas de óxidos de ferro contendo cromo e cobre

Chromium and copper-doped hematites were prepared with the aim of studying the synergistic effect of these dopants on the textural and on the catalytic properties of the iron oxides towards the high temperature shift reaction. It was found that the most active catalysts were those with the highest amount of copper. They had the Fe(II)/Fe(III) ratio near the stoichiometric value of magnetite, the highest surface areas under the reactional atmosphere and the greatest tendency to produce the active form; they also were poorly crystalline solids. The best performance was shown by the catalyst with Fe/Cu=10, heated at 300ºC. It can thus be concluded that copper acts both as textural and structural promoter in these catalysts.

Ostwald ripening in porous materials

The process of coarsening of an ensemble of clusters is investigated for the case that elastic strains due to matrix - cluster interactions change the process qualitatively as compared with dependencies established theoretically first by Lifshitz and Slezov. Such a qualitatively different behavior occurs always when the energy of elastic deformation in cluster growth increases more rapidly than linear with the volume of a cluster. Analytic solutions, for limiting cases, as well as numerical solutions, for the general case of coarsening in an ensemble of pores with a given pore size distribution, are presented. Possible applications are discussed.

Reações de Diels-Alder entre compostos carbonílicos a,b-insaturados e ciclopentadieno

We review herewith the use of solids such as activated alumina and other modern Lewis acid catalysts, as well as the influence of different solvents, including water, on the title reactions, described in the last seven years.

Parâmetros e símbolos a serem utilizados em Ressonância Magnética Nuclear

NMR is now frequently the technique of choice for determination of chemical structure in solution. Its uses also span structure in solids and mobility at the molecular level in all phases. The research literature in the subject is vast and ever-increasing. Unfortunately, many articles do not contain sufficient information for experiments to be repeated elsewhere, and there are many variations in the usage of symbols for the same physical quantity. It is the aim of the present recommendations to provide simple check-lists that will enable such problems to be minimised in a way that is consistent with general IUPAC formulation. The area of medical NMR and imaging is not specifically addressed in these recommendations, which are principally aimed at mainstream use of NMR by chemists (of all sub-disciplines) and by many physicists, biologists, material scientists and geologists etc. working with NMR.

Glicídios no mel

A review about composition, origin and importance of carbohydrates in honey is presented. Fructose and glucose are the major carbohydrates, ranging from 65-85 % of the total soluble solids. Other minor carbohydrates, chiefly di- and trisaccharides, have been also identified. Fructose, glucose and sucrose are mainly originated from nectar. Oligosaccharides are mainly formed by trans-alpha-D-glucosylation reactions catalysed by honeybee alpha-D-glucosidase. The profile of carbohydrates can be useful for the identification of the brazilian region in which honey was produced and may also be useful for testing brazilian honey authenticity.

Propelente sólido compósito polibutadiênico: I- influência do agente de ligação

In the Brazilian Complete Spacial Mission, the research of Vehicle Satellite Launcher is important. The solid propellant composite used in this vehicle is made with ammonium perchlorate, aluminiun powder and hydroxy terminated polibutadiene resin. In the propellant the bonding agent has a function to promote the interaction between solids and polimeric matrix, improving mechanical properties as stress, strain, aging characteristics and moisture embrittlement. Due its importance in propellant, bonding agent is consider as industrial secret and the literature about it is generic, without greater informations.

Catalisadores Ni/Al2O3 promovidos com molibdênio para a reação de reforma a vapor de metano

Mo-promoted Ni/Al2O3 catalysts for the methane steam reforming reaction were studied in this work. The Ni/Al2O3 catalysts were prepared by precipitation and molibdenum was added by impregnation up to 2%wt. The solids were tested using a micro-reactor under two H2Ov/C conditions and were characterized by ICP-OES, XRD, N2 adsoption, H2 chemisorption and TPR. NiO and NiAl2O4 phases were observed and the metallic area decreased with the increase of the Mo content. From the catalytic tests high stability was verified for H2Ov/C=4.0. On the other hand, only the catalyst containing 0,05% Mo stayed stable during 30 hours of the test at H2Ov/C=2.0.

Tratamento de efluente da indústria de processamento de coco utilizando eletroflotação

Electroflotation (EF) with aluminum electrodes was applied in the treatment of Brazilian industrial coconut wastewater. The results show that EF with polarity inversion is a very good treatment when compared to others. The removal of pollutants in the wastewater after EF with polarity inversion was 96.3% of oils and grease, 99% of color and 66% of total organic carbon. Also, metal concentrations, turbidity and total solids were reduced.