Random regression models to estimate genetic parameters for milk production of Guzerat cows using orthogonal Legendre polynomials

The objective of this work was to compare random regression models for the estimation of genetic parameters for Guzerat milk production, using orthogonal Legendre polynomials. Records (20,524) of test-day milk yield (TDMY) from 2,816 first-lactation Guzerat cows were used. TDMY grouped into 10-monthly classes were analyzed for additive genetic effect and for environmental and residual permanent effects (random effects), whereas the contemporary group, calving age (linear and quadratic effects) and mean lactation curve were analized as fixed effects. Trajectories for the additive genetic and permanent environmental effects were modeled by means of a covariance function employing orthogonal Legendre polynomials ranging from the second to the fifth order. Residual variances were considered in one, four, six, or ten variance classes. The best model had six residual variance classes. The heritability estimates for the TDMY records varied from 0.19 to 0.32. The random regression model that used a second-order Legendre polynomial for the additive genetic effect, and a fifth-order polynomial for the permanent environmental effect is adequate for comparison by the main employed criteria. The model with a second-order Legendre polynomial for the additive genetic effect, and that with a fourth-order for the permanent environmental effect could also be employed in these analyses.

Defoliation of strawberry mother plants for the production of runner tips

The objective of this work was to determine the sink-source relationships and their effects on the number and growth of runner tips of 'Camino Real' strawberry stock plants. Three types of sources were evaluated: one defoliation at 96 days after planting (DAP), two defoliations at 50 and 96 DAP, and mother plants without defoliation. Four types of sink were accessed: runner tips collected weekly and monthly, four stolons with rooted runner tips in pots, and four freely-grown stolons. A completely randomized experimental design was used in a split-plot arrangement, with four replicates. The source types were placed in the plots, and sink types in the subplots. The number of runner tips, the crown diameter, and the dry matter mass were determined. Number and growth of tips were higher on plants without defoliation, and decreased 44.7% on twice-defoliated mother plants. The two-defoliation management did not reduce runner tip dry matter mass only on plants with rooted stolons, which produced runner tips 50% heavier. Defoliation of mother plants bearing rooting stolons can be used to reduce their growth, without reducing the emission and growth of runner tips.

Hormonal protocols for in vitro production of Zebu and taurine embryos

The objective of this work was to evaluate the effects of hormonal synchronization protocols, associated or not with follicular development stimulation, on the recovery of oocytes and on in vitro production of Bos indicus and B. taurus embryos, in different seasons. Ultrasound-guided follicular aspirations (n=237) were performed without pre-treatment (G1, control group) and after follicular wave synchronization (G2), or after follicular wave synchronization and follicle growth induction (G3). Bos indicus produced more oocytes and embryos than B. taurus (18.7±0.9 vs. 11.9±0.6 oocytes and 4.8±0.3 vs. 2.1±0.2 embryos). On average, oocyte and embryo yields were higher in G3 than in G2, and both were greater than in G1, which lead to a higher conversion of oocytes to embryos in these treatments. The hot or the cold season did not affect the B. indicus outcomes, whereas, in B. taurus, both oocyte recovery and embryo production were higher in the cold season. Follicular wave synchronization improves ovum pick-up and in vitro production of embryos in both cattle subspecies evaluated.

Management of slips and its effect on growth and production of 'Pérola' pineapple plants

The lack of good quality planting material has limited the expansion and contributed to yield reduction of the Brazilian pineapple culture. Alternatives of 'Pérola' pineapple slips management were studied aiming at obtaining superior planting material within a shorter time period and making good use of healthy slips of low vigor, that are commonly discarded by growers. Two experiments were carried out at the Experimental Field of Embrapa Cassava & Fruits, Cruz das Almas, Bahia, Brazil, and another one in a commercial plantation in the region of Itaberaba, BA, using blocks or entirely randomized designs with at least four replications. In the first one, the development of slips of different initial sizes (6 to 20 cm long), when grown on mother plants after fruit harvest, was compared with that of slips grown in a nursery after their removal from the mother plants. It became clear that larger slips grow more vigorously and that the removal from the mother plant delays their growth. However, results from the second study showed that those slips grown in nursery had vegetative and agronomic performance similar to that of conventional slips and close to that of plantlets produced from plant stem sections. Independently from the type of planting material used, the larger ones presented a more vigorous growth and produced higher yields. In the third study, it was observed the influence of mineral fertilization, pest control and growth regulator application after fruit harvest on slip development. The treatments applied did not significantly accelerate slip growth. Slips reached 50 cm length and at least 300 g fresh weight within 90 days after fruit harvest, indicating that vigorous plants have enough nutritional storage material for slips development.

Growth and production of irrigated vitória pineapple grown in semi-arid conditions

This study aimed to evaluate the growth characteristics of irrigated Vitória pineapple plants grown in semi-arid conditions and determine its developmental stages based on those characteristics. It was used a randomized block design with four replicates. The experimental treatments were: plant harvest at 270, 330, 390, 450, 510, 570, 690, 750, and 810 days after planting (DAP). The following variables were determined: plant height, stem diameter, D-leaf length, D-leaf fresh and dry mass, biomass production of plants and plant parts (organs), and vegetative biomass. Five phenological stages are proposed based on vegetative biomass production: < 20% biomass production (V1); 21-40% (V2); 41-60% (V3); 61-80% (V4); and > 80% (V5). The maximum growth rate for plant height, D-leaf length, and stem diameter was observed at the end of the phenological stage V1 (390-411 DAP), and at the end of stage V5 these plant traits had average values of 106, 82, and 7 cm, respectively. The maximum biomass accumulation rates were observed at stages V4 and V5, resulting in a final fruit yield and total fresh biomass of 72 t ha-1 and 326 t ha-1, respectively. Finally, we estimated that 80% of the accumulated biomass may remain in the field after fruit and slip harvest, and could be incorporated as plant residue into the soil.

Production of fungal protein by solid substrate fermentation of cactus Cereus peruvianus and Opuntia ficus indica

Agricultural wastes from cactus Cereus peruvianus and Opuntia ficus indica were investigated for protein production by solid substrate fermentation. Firstly, the polyelectrolytes were extracted and used in water cleaning as auxiliary of flocculation and coagulation. The remaining fibrous material and peels were used as substrate for fermentation with Aspergillus niger. Glucoamylase and cellulase were the main enzymes produced. Amino acids were determined by HPLC and protein by Lowry's method. After 120 hours of fermentation the protein increased by 12.8%. Aspartic acid (1.27%), threonine (0.97%), glutamic acid (0.88%), valine (0.70%), serine (0.68%), arginine (0.82%), and phenylalanine (0.51%) were the principal amino acids produced.

Production of silica gel from residual rice husk ash

This paper presents a study on the production of silica gel in hydrothermal process using residual rice husk ash. Measurements of the chemical composition, X-ray diffraction, infrared spectroscopy, particle size distribution, and pozzolanic activity were carried out in order to characterize the obtained material, and the optimal silica gel was selected for use as a mineral additive in cement pastes. The compressive strengths were determined for cement pastes containing silica gel (0.0, 2.5 or 5% by mass) in different times. The results indicate that the mixtures containing silica gel showed improved mechanical behavior over all time periods evaluated.

Preparation and immobilization of diNOsarcobalt(III) complex in zeolite y for the catalyzed production of hydrogen peroxide

A complex cation, diNOsarcobalt(III), [Co(diNOsar)]3+, (diNOsar = 1,8-dinitro-3,6,10,13,16,19-hexaazabicyclo-[6.6.6]eicosane), was synthesized and immobilized in the cavities of a Y zeolite by the reaction of precursor species in the pores of the zeolite. The encapsulated material was compared to the compound diNOsarcobalt(III) chloride, [Co(diNOsar)]Cl3. Both diNOsarcobalt(III) chloride and the zeolite-encapsulated complex, [Co(diNOsar)]3+/zeolite, were obtained in high yield and characterized by ultraviolet-visible and infrared spectroscopy. X-ray diffraction demonstrated the incorporation of the complex cation into the pores of the zeolite. The catalytic production of hydrogen peroxide from oxygenated water confirmed the successful synthesis of the complex diNOsarcobalt(III) immobilized in the zeolite.

Advances in ethanol reforming for the production of hydrogen

Catalytic steam reforming of ethanol (SRE) is a promising route for the production of renewable hydrogen (H2). This article reviews the influence of doping supported-catalysts used in SRE on the conversion of ethanol, selectivity for H2, and stability during long reaction periods. In addition, promising new technologies such as membrane reactors and electrochemical reforming for performing SRE are presented.

Simple method for mass production of polypyrrole/carbon nanotubes hybrid artificial muscle

Large scale preparation of hybrid electrical actuators represents an important step for the production of low cost devices. Interfacial polymerization of polypyrrole in the presence of multi-walled carbon nanotubes represents a simple technique in which strong interaction between components is established, providing composite materials with potential applications as actuators due to the synergistic interaction between the individual components, i.e., fast response of carbon nanotubes, high strain of polypyrrole, and diversity in the available geometry of resulting samples.

Production of policlonal antisera specific to plant viruses by rabbit oral immunization

Serological techniques are of great importance for plant virus identification and characterization. The major limiting factor for using these techniques for plant virus identification is the requirement of a good virus purified preparation to be used in immunizing animals for antiserum production. In the present study, two New Zealand rabbits were orally immunized with extracts from cowpea (Vigna unguiculata) plants systemically infected with Cowpea severe mosaic virus (CPSMV) and with extracts from papaya (Carica papaya) infected with Papaya lethal yellowing virus (PLYV). The leaf extracts were prepared in saline solution 0.15 M in the rate of 1:1 (w/v) and clarified by a centrifugation of 10,000 g for 10 min. The clarified extracts containing the viruses were orally administered to the New Zealand rabbits in two series of five daily doses of 1.0 ml each. The obtained policlonal antisera were shown to be very specific to their respective viruses in double immunodiffusion and indirect ELISA. These seem to be the first antisera specific for plant virus obtained by rabbit oral immunization. The results open up some possibilities for producing antisera to plant viruses of difficult purification. It is a simple, fast and inexpensive method for production of antisera for plant viruses when compared to the traditional techniques that involve rabbit injections with purified virus preparations.

Production of caffeine alkaloid by Claviceps sorghi

The ergot disease of sorghum (Sorghum bicolor), caused by the fungus Claviceps sorghi, restricted to the Indian sub-continent, is a disease in which the pathogen infects the florets, colonizing the unfertilized ovaries. Losses are higher in hybrid seed production fields due to a higher susceptibility of male sterile lines. The sclerotia of C. sorghi have never been found to contain alkaloids with a tetracyclic ergoline ring system, which is normal in most ergot pathogens. In this work, we show that sclerotia of C. sorghi contain caffeine alkaloid and the ability to produce it in vitro.

Soybean pod blight and root rot caused by lineages of the Fusarium graminearum and the production of mycotoxins

Surveys of soybean (Glycine max) seed grown in South Brazil revealed infection with Fusarium graminearum. To determine if members of this complex were pathogenic to soybean, six strains derived from soybean were added to soil at a rate of 10³ macroconidia/ ml or individual pods were inoculated with 10(4) macroconidia/ml. Seedlings grown in infested soil developed small necrotic lesions in the crown and upper roots. Pods inoculated with conidia developed large (>1 cm), dark brown, necrotic lesions. Younger pods inoculated with the fungus blighted and dropped from the plant. Strains of the F. graminearum complex recovered from lesions on the crown, roots and pods of soybean plants were identified as lineage 1, 2 or 8 by obtaining the DNA sequence from the EF1-alpha gene and comparing it to strains of the known lineage. Two strains of F. graminearum lineage 7 from the U.S. caused similar symptoms of the disease on soybean. Mycotoxin tests on soybean and wheat (Triticum aestivum) indicate that most Brazilian strains produce nivalenol as the major trichothecene mycotoxin rather than deoxynivalenol. In addition, strains from lineages 2 and 8 produce the novel trichothecene, 3-acetylnivalenol.

Effect of temperature, leaf wetness, and rainfall on the production of Guignardia citricarpa ascospores and on back spot severity on sweet orange

The black spot of citrus (Citrus sp.) is caused by Guignardia citricarpa with ascospore production depending on temperature, leaf wetness, and rainfall. The number of ascospores produced was monitored using a spore trap and climatic factors were recorded using an automated meteorological station of 'Natal' and 'Valencia' sweet orange (Citrus sinensis) orchards in Mogi Guaçu in the state of São Paulo, Brazil, from November 2000 to March 2001. The fruits were bagged to prevent infection and the bags removed from different sets of fruit for one week during each of the 18 weeks of the season in both orchards. Ascospores were produced during the entire experimental period, from spring through summer, primarily after rain events. In both orchards, ascospore production reached a peak in January and February. Ascospore production was related to leaf wetness only in the Natal orange orchard but was not related to total rainfall or temperature in either orchard. Disease was most severe on fruit exposed the 7th, 8th, and 13th weeks after beginning the experiment in both cultivars as well as after the 16th week for 'Natal'. There was a strong relationship between disease severity and total rainfall for both orchards and a weak correlation between temperature and severity in the 'Natal' block only. There was no relationship between severity and leaf wetness or ascospore numbers.

Expression of Grapevine leafroll-associated virus 3 coat protein gene in Escherichia coli and production of polyclonal antibodies

Grapevine leafroll-associated virus 3 (GLRaV-3), the main viral species of the grapevine leafroll complex, causes yield and quality reduction in grapes (Vitis spp.). The coat protein gene was RT-PCR-amplified from total RNA extracted from infected grapevine leaves and the amplified fragment was cloned and completely sequenced. The fragment was subsequently subcloned into the pRSET-C expression vector. The recombinant plasmid was used to transform Escherichia coli BL21:DE3 and express the capsid protein. The coat protein, fused to a 6 His-tag, was purified by affinity chromatography using an Ni-NTA resin. The identity of the purified protein was confirmed by SDS-PAGE and Western blot. The in vitro-expressed protein was quantified and used for rabbit immunizations. The antiserum was shown to be sensitive and specific for the detection of GLRaV-3 in grapevine extracts in Western blot and DAS-ELISA assays, with no unspecific or heterologous reactions against other non-serologically related viruses being observed.