Poultry carcass decomposition and physicochemical analysis of compounds in different Composter types

This study aimed to assess five composter types in poultry carcasses decomposition and to perform a physicochemical analysis of the compounds obtained. Composter types used were six-hole brick, wood, screen, windrow with three PVC pipes with six holes and windrow with three PVC pipes with 10 holes. Composting was followed by four periods using wood shaving like substrate with one bird carcass placed in each composter. Pile turning was performed every 10 days and temperature in each layer was measured on 1st, 7th, 14th, 19th and 29th day, at 3 p.m., as well as room temperature. Temperature during pile turning was also measured at five points per layer and carcass weighing performed to calculate decomposition percentage. Physicochemical parameters evaluated in substrates were moisture, ash, phosphorus, potassium, nitrogen, pH, organic carbon and C/N ratio, up to 30 days. Data were analyzed by repeated measures model, using MIXED method of SAS software. All values of final physicochemical composition of substrates were found according to values of IN-25, except nitrogen. The composter types were efficient in decomposition of poultry carcasses.

Environment in poultry production covered with thermal and aluminum roofing tiles

Brazil is a country of tropical climate, a fact that hinders the poultry production in the aspect of thermal comfort. Thus, we aimed to evaluate the thermal environment in commercial poultry houses with different covers during the months of December 2012 to May 2013, in the municipality of Rio Verde, Goiás. The experimental design was completely randomized in split plots with factorial arrangement of treatments 2x3, being two shed models (thermal and aluminum roof tiles) and three sections within each shed (initial, central and final) for 182 days, having the days as replicates. The thermal environment was assessed through thermal comfort indices: Temperature and Humidity Index, Black Globe Temperature and Humidity Index, Radiant Heat Load and Enthalpy. The data was analyzed by SISVAR 5.1., through the analysis of variance, the Scott Knott test used to compare the means, considering a significance level of 1%. The results showed a significant statistical difference between the sheds and the points assessed (P < 0.05). The thermal shed had the lowest values for the environmental variables (Dbt and Bgt) and thermal indices studied, but larger values for the RH compared to the shed with aluminum covering. The use of thermal covers minimizes the difference in temperature range throughout various times of the day, being at 14:00 o'clock the prominence time to others.

Effect of cycle time and airflow in biological nitrogen removal from poultry slaughterhouse wastewater using sequencing batch reactor

This study aimed to evaluate the influence of airflow (0.25, 0.50 and 0.75 L.L-1.min-1) and cycle time (10.45 h, 14.25 h and 17.35 h) on a sequencing batch reactor (SBR) performance in promoting nitrification and denitrification of poultry slaughterhouse wastewater. The operational stages included feeding, aerobic and anoxic reactions, sedimentation and discharge. SBR was operated in a laboratory scale with a working volume of 4 L, keeping 25% of biomass retained inside the reactor as inoculum for the next batch. In the anoxic stage, C: N ratio was maintained between 5 and 6 by adding cassava starch wastewater. A factorial design (22) with five repetitions was designed at the central point to evaluate the influence of cycle time and airflow on total inorganic nitrogen removal (N-NH4++N-NO2-+N-NO3-) and in the whole process (nitrification and denitrification). The highest total inorganic nitrogen removal (93.3%) was observed for airflow of 0.25 L.L-1.min‑1 and a cycle time of 14.25 h. At the end of the experiment, the sludge inside the reactor was characterized by fluorescent in situ hybridization (FISH), indicating the presence of ammonia and nitrite oxidizing bacteria.

Production of natural aroma by yeast in wastewater of cassava starch industry

ABSTRACT2-Phenylethanol (PE) is an aromatic alcohol with a characteristic odor of roses, widely used in food industry to modify certain aroma compositions in formulations with fruit, jam, pudding, and chewing gums, and also in cosmetic and fragrance industry. This compound occurs naturally in low concentrations in some essential oils from flowers and plants. An alternative to plants extraction are biotechnological processes. This study evaluated 2-phenylethanol’s production in cultivation of Saccharomyces cerevisiae in cassava wastewater originated from starch industry. The substrate was supplemented with glucose and L-phenylalanine in order to obtain higher 2-phenylethanol concentrations and better efficiency in glucose/2-phenylethanol conversion. It was performed using Rotatable Center Composite Design and response surface analysis. Cultures were performed under aerobic conditions in a batch system in Erlenmeyer flasks containing 50 mL of medium in shaker at 150 rpm and 24 ± 1 ºC. The highest PE values ​​were obtained with supplementation of 20.0 g.L-1 of glucose and 5.5 g.L-1 of L-phenylalanine, which has been experimentally validated, obtaining a PE production of 1.33 g.L-1 and PE/glucose yield factor of 0.070 g.g-1, equivalent to 74.3 and 89.7% ​​of desirability values according to the validated model.

Genes associated with pathogenicity of avian Escherichia coli (APEC) isolated from respiratory cases of poultry

The virulence mechanisms of avian pathogenic Escherichia coli (APEC) have been continually studied and are believed to be multi-factorial. Certain properties are primarily associated with virulent samples and have been identified in avian isolates. In this study a total of 61 E. coli, isolates from chicken flocks with respiratory symptomatology, were probed by Polimerase Chain Reation (PCR) for the presence of genes responsible for the adhesion capacity, P fimbria (papC) e F11 fimbria (felA), colicin production (cvaC), aerobactin presence (iutA), serum resistance (iss), temperature-sensitive hemagglutinin (tsh), and presence of K1 and K5 capsular antigens (kpsII). The iss gene was detected in 73,8%, tsh in 55,7%, iutA in 45,9%, felA in 39,3%, papC in 24,3%, cvaC in 23% and kpsII in18%.

Sparrows (Passer domesticus L.) as intermediary hosts of Toxoplasma gondii in poultry farms from the "agreste" region of Pernambuco, Brazil

This paper aimed to identify Toxoplasma gondii infection in house sparrows (Passer domesticus, Linneaus 1758) coming from poultry farms in the "agreste" region of the Brazilian state of Pernambuco. 151 sparrows (Passer domesticus) captured in eight broiler, egg layer and commercial laying poultry farms, were used. Indirect hemagglutination test was used to research anti-T. gondii antibodies. Animals that presented titration of 1:16 were destined to DNA research through Polymerase Chain Reaction (PCR) technique, followed by Nested-PCR. It was observed that, from 151 analyzed samples. 91 (60.3%) were reagents and 60 (39.7%) were not reagents. It was verified, through analysis of the distribution of infected animals frequency per farm, that in only one farm (12.5%) no animal reagent to T. gondii was captured. It was also observed that three (30.00%) of the ten samples destined to DNA research for T. gondii were positive to PCR and four (40.00%) were positive to Nested-PCR. Anti-T gondii antibodies occurrence and the molecular identification of the agent confirmed natural T. gondii infection in sparrows from poultry farms in Brazil. Other studies must be carried out to highlight the real importance of these animals in the epidemiological chain and their efficiency in the transmission of the parasite to felines. Therefore, researches that use parasite isolation and molecular techniques to determine genomic profile of the agent present in these poultry farms are needed.

Aspergillus fumigatus from normal and condemned carcasses with airsacculitis in commercial poultry

Carcass inspection is important for the detection of certain diseases and for monitoring their prevalence in slaughterhouses. The objective of this study was to assess the occurrence of aspergillosis caused by Aspergillus fumigatus in commercial poultry, through mycological and histopathological diagnosis, and to verify the causal association between the aspergillosis diagnosis criteria and condemnation due to airsacculitis in broilers through a case-control study. The study was carried out with 380 samples. Lungs were collected from broilers that were condemned (95) or not condemned (285) due to airsacculitis directly from the slaughter line. Forty-six (12%) lung samples were positive for A. fumigatus in mycological culture. Among all samples, 177 (46.6%) presented histopathological alterations, with necrotic, fibrinous, heterophilic pneumonia; heterophilic pneumonia and lymphoid hyperplasia being the most frequent. Out of the 380 lungs analyzed, 65.2% (30) showed histopathological alterations and isolation of fungi. The statistical analysis (McNemar's chi-square test) indicated a significant association between the presence of histopathological lesions and the isolation of A. fumigatus. Mycological cultivation and histopathological diagnosis increase the probability of detecting pulmonary alterations in birds condemned by the Final Inspection System, which suggests that such diagnostic criteria can improve the assessment and condemnation of birds affected by airsacculitis.

Occurrence of Mycoplasma synoviae on commercial poultry farms of Pernambuco, Brazil

The state of Pernambuco is the largest producer of eggs in the North and Northeast of Brazil and second one in the broiler production. Mycoplasmas are important avian pathogens, which cause respiratory and joint diseases that result in large economic losses. The aim of the present study was to investigate the occurrence of Mycoplasma gallisepticum (MG) and Mycoplasma synoviae (MS) in broilers and commercial laying hens in the state of Pernambuco, Brazil. Tracheal fragments were analyzed from 55 healthy broilers, 35 broilers with respiratory signs and 30 commercial laying hens with respiratory signs, from 24 commercial poultry farms, each sample was composed of a pool of five birds. The bacteriological exam, PCR and nested PCR were used for the detection of Mycoplasma gallisepticum (MG) and Mycoplasma synoviae (MS). All samples were negative in bacteriological isolation. In the PCR analyses, seven samples from birds with respiratory signs were positive for MS and one was positive for MG, the latter of which was confirmed as the MG-F vaccine strain. The occurrence of MS in chickens with respiratory signs may indicate inadequate sanitary management on poultry farms, favoring the propagation of mycoplasmosis.

Monitoring and molecular characterization of group Drotavirus in Brazilian poultry farms

Abstract: Rotaviruses are etiological agents of diarrhea both in humans and in several animal species. Data on avian Group D rotaviruses (RVD) are scarce, especially in Brazil. We detected RVD in 4 pools of intestinal contents of broilers, layer and broiler breeders out of a total of 111 pools from 8 Brazilian states, representing an occurrence of 3.6%, by a specific RVD RT-PCR targeting the VP6 gene. Phylogenetic tree confirmed that the Brazilian strains belong to group D and 3 of the sequences were identical in terms of amino acid whereas one showed 99.5% identity with the others. The sequences described in this study are similar to other sequences previously detected in Brazil, confirming the conserved nature of the VP6 protein.

Experimental results and modeling of poultry carcass cooling by water immersion

Poultry carcasses have to be chilled to reduce the central breast temperatures from approximately 40 to 4 °C, which is crucial to ensure safe products. This work investigated the cooling of poultry carcasses by water immersion. Poultry carcasses were taken directly from an industrial processing plant and cooled in a pilot chiller, which was built to investigate the influence of the method and the water stirring intensity on the carcasses cooling. A simplified empiric mathematical model was used to represent the experimental results. These results indicated clearly that the understanding and quantification of heat transfer between the carcass and the cooling water is crucial to improve processes and equipment. The proposed mathematical model is a useful tool to represent the dynamics of carcasses cooling, and it can be used to compare different chiller operational conditions in industrial plants. Therefore, this study reports data and a simple mathematical tool to handle an industrial problem with little information available in the literature.

Cassava starch in the Brazilian food industry

Cassava starch is a valued raw material for producing many kinds of modified starches for food applications. Its physicochemical properties, as well as its availability, have made it an interesting and challenging ingredient for the food industry. In the present work, food grade modified cassava starches were purchased from producers and analyzed for selected physicochemical characteristics. Samples of sour cassava starch were included, as well as one sample of native cassava starch. Results showed that almost all modified starches were resistant to syneresis, produced pastes more stable to stirred cooking, and some of them were difficult to cook. The sour cassava starches presented high acidity and resulted in clear and unstable pastes during stirred cooking, susceptible to syneresis.

Stability of the anthocyanins extracted from residues of the wine industry

Anthocyanins are highly important due to their antioxidant capacity. They are the most important among the phenolic compounds and one of the main natural dyes used in the food industry. In this research, residue of processed grapes was used to investigate the presence of anthocyanins, the possibility of their extraction from the residue, and their stability. The extraction solution consisted of 70 mL of ethanol 70% and 30 mL of HCl 0.1% at pH 2.0. The results found for the processed grapes residue was 26.20 mg.100 g-1. In order to evaluate stability, caffeic acid was added at 0.5:1 w/v; 0.8:1 w/v; and 1:1 w/v concentrations. Anthocyanins extract reached the greatest stability at 0.5:1 w/v concentration, with 82.47% color retention and a half-life period of 15 days. Therefore, the use of this organic acid as a stabilizer for anthocyanins is feasible.

Okara, a soymilk industry by-product, as a non-meat protein source in reduced fat beef burgers

Okara is a by-product generated during the manufacture of soymilk and tofu. Wet okara was added to beef burgers at 0%, 20%, and 25%. The effects of okara on certain physicochemical, textural, and sensory properties of reduced fat beef burgers were investigated. The beef burgers formulated with okara (104.0-106.0 kcal/100 g) had 60% less calories than commercial beef burgers (268.8 kcal/100 g). The texture profile analysis showed that the addition of wet okara led to a significant increase in hardness (p < 0.05) and a concomitant reduction in the values of chewiness, springiness, and cohesiveness. Lower sensory scores (p < 0.05) of flavour were observed in the beef burgers containing 25% wet okara. However, the sensory evaluation results showed that juiciness, appearance, tenderness, and overall acceptability of beef burgers formulated with okara did not differ statistically from that of the control (0% okara). Wet okara (20%) can be used as a non-meat protein source in the production of reduced-fat beef burgers without changing their sensory quality.

Detection of exopolysaccharide production and biofilm-related genes in Staphylococcus spp. isolated from a poultry processing plant

Staphylococcus spp. can survive in biofilms for long periods of time, and they can be transferred from one point to another and cause environmental contamination in food processing. The aim of this study was to detect Staphylococcus strains isolated from a poultry processing plant by the presence of adhesion genes and the phenotypic production of exopolysaccharide. In the present study, the production of exopolysaccharide and the presence of adhesion genes in 65 strains of Staphylococcus spp. were evaluated. All strains of Staphylococcus spp. produced exopolysaccharide, as confirmed by formation of black and opaque colonies in Congo Red Agar. The variation of sucrose content was critical for the production of exopolysaccharide in Congo Red Agar since at low sucrose concentrations all strains presented a characteristic result, i.e., there was no exopolysaccharide production. The atl gene was found in all strains, and the icaA and icaD genes were found in 97% of them. The data obtained suggest that Staphylococcus spp. isolated from the poultry processing plant evaluated has a potential for biofilm formation. An efficient control of this microorganism in food processing environment is necessary as they may represent a potential risk to consumers.

Prevalence of Listeria monocytogenes in poultry meat

Abstract The objectives of this study were i) to isolate Listeria spp. and Listeria monocytogenes in broiler wing meat samples, ii) to confirm the isolates by PCR, based on prs and hly A gene sequences, iii) to determine the seasonal and monthly distribution of the isolates. A total of 120 broiler wing meat samples (60 packaged pieces wrapped using strech film in styrofoam plates and 60 unpackaged pieces) bought from different markets in Hatay province were analysed. Listeria spp. was isolated from 57 (47.5%) out of 120 samples. Fifty-four, out of 57 Listeria spp. isolates were identified as L. monocytogenes. L. monocytogenes was isolated from the samples collected during the spring, winter, summer, and autumn at the levels of 26.6%, 40%, 53.3%, 60%, respectively. In this study, the isolation rates were found to be the highest in autumn, while the isolation rates were found to be the lowest in spring. As a consequence, high prevalence of Listeria spp. and L. monocytogenes in poultry wing meat samples may pose a risk for human health. We consider that with obeying the rules of good hygiene practices (GHP), good manufacturing practices (GMP) and HACCP can minimize the contamination with Listeria spp.