Estimativa da batimetria do açude do Saco-PE com auxílio de dados orbitais

A batimetria de um corpo d'água pode ser medida em campo, a partir de sondas batimétricas; no entanto, é um processo oneroso e que demanda tempo. Com isso, o objetivo principal deste estudo foi ajustar modelos de estimativa de batimetria de um lago a partir de dados orbitais. O trabalho foi realizado no açude do Saco, localizado na bacia hidrográfica do Rio Pajeú, na cidade de Serra Talhada - PE. Foram ajustados modelos de regressão entre os valores batimétricos, coletados com auxílio de uma sonda, as bandas espectrais verde e infravermelho próximo do satélite Landsat 5 TM e o índice da diferença normalizada da água. A avaliação dos modelos ajustados foi realizada pela análise do coeficiente de determinação, do erro quadrado médio e da eficiência do modelo. A batimetria do açude variou entre 0,3 e 10 metros de profundidade. Os melhores ajustes foram encontrados com a utilização dos modelos potencial e exponencial, com valores de coeficiente de determinação superiores a 0,46 e de eficiência do modelo próximos da unidade. Pode-se concluir que os modelos de batimetria, ajustados a partir de dados de sensoriamento remoto, estimaram com satisfatória exatidão os valores de batimetria do açude do Saco, principalmente nas partes mais rasas do lago.

Estrutura do tegumento seminal de quatro espécies de Leguminosae (Caesalpinioideae), ocorrentes numa área de caatinga (PE ­ Brasil)

Neste estudo observou-se que os tegumentos seminais de Caesalpinia ferrea, C. pyramidalis, Senna martiana e S. spectabilis var. excelsa estão compostos de um estrato de macrosclereídes, revestido por cutícula e subcutícula, seguido por uma camada de osteosclereídes, parênquima esclerificado e camada interna também de osteosclereídes. A impermeabilidade dos tegumentos seminais, possivelmente, se restringe à região das macroesclereídes.

Táxons de Mucor Fresen. (Zygomycota) em fezes de herbívoros, Recife, PE, Brasil

Visando contribuir para o conhecimento sobre Mucorales (Zygomycota) em Recife, PE, foram realizadas coletas mensais, de junho/1997 a maio/1998, totalizando 120 amostras de fezes dos herbívoros: Bison bonasus H. Smith, Bos indicus L., Bubalus bubalis H. Smith, Capra hircus L., Oryctolagus cuniculus Lilljeborg, Dasyprocta fuliginosa Wagler, Taurotragus oryx Wagner, Equus caballus L., Ovis aries L. e Mazama gouazoubira Fischer, mantidos em cativeiro no Parque Dois Irmãos e no Departamento de Zootecnia da Universidade Federal Rural de Pernambuco. As amostras de fezes foram acondicionadas em câmara úmida (placa de Petri) à temperatura ambiente sendo observadas diariamente, do 2º ao 15º dia de incubação. As colônias de interesse foram isoladas e, após desenvolvimento, mantidas em Batata Dextrose Ágar (BDA) e/ou "Synthetic Mucor Agar" (SMA). Foram identificados 11 táxons já conhecidos e uma forma nova: Mucor circinelloides f. circinelloides, M. circinelloides f. griseocyanus, M. circinelloides f. janssenii, M. circinelloides f. lusitanicus, M. hiemalis f. hiemalis, M. hiemalis f. luteus, M. genevensis, M. piriformis f. piriformis, M. piriformis f. nanus, M. racemosus f. chibinensis, M. subtilissimus e M. variosporus. Com exceção das fezes de Bubalus bubalis, todas desenvolveram representantes de táxons de Mucor, apresentando maior diversidade as fezes de Bison bonasus, Oryctolagus cuniculus, Dasyprocta fuliginosa e Mazama gouazoubira. O maior índice de similaridade (75%) foi verificado em táxons de Mucorales nas fezes de Dasyprocta fuliginosa e Ovis aries, assim como de Capra hircus e Oryctolagus cuniculus. Chave para identificação dos táxons isolados, assim como descrições, comentários e ilustrações foram incluídos.

Isolamento e seleção de fungos filamentosos do solo de sistemas agroflorestais do Município de Bom Jardim (PE) com base na capacidade de produção de enzimas hidrolíticas

O presente trabalho teve por objetivo isolar e identificar fungos de solo de sistemas agroflorestais e avaliar a atividade enzimática destes fungos. Estes foram isolados pela técnica de diluição sucessiva e avaliados quanto à capacidade de degradar amido, celulose e caseína. Foram identificadas 11 espécies de fungos anamorfos (Hyphomycetes) distribuídos em cinco gêneros: Aspergillus, Cladosporium, Curvularia, Fusarium e Penicillium. As espécies estudadas não apresentaram atividade amilolítica satisfatória. Cladosporium cladosporioides (Fres.) De Vries e Penicillium chrysogenum Thom apresentaram maior índice de relação enzimática (IRE) para protease e celulase. Entre as espécies estudadas seis apresentaram maior Índice de Relação Enzimática (IRE) para celulase em comparação as demais enzimas.

In vitro studies of multiwalled carbon nanotube/ultrahigh molecular weight polyethylene nanocomposites with osteoblast-like MG63 cells

Carbon nanotubes are highly versatile materials; new applications using them are continuously being developed. Special attention is being dedicated to the possible use of multiwalled carbon nanotubes in biomaterials contacting with bone. However, carbon nanotubes are also controversial in regards to effects exerted on living organisms. Carbon nanotubes can be used to improve the tribological properties of polymer/composite materials. Ultrahigh molecular weight polyethylene (UHMWPE) is a polymer widely used in orthopedic applications that imply wear and particle generation. We describe here the response of human osteoblast-like MG63 cells after 6 days of culture in contact with artificially generated particles from both UHMWPE polymer and multiwalled carbon nanotubes (MWCNT)/UHMWPE nanocomposites. This novel composite has superior wear behavior, having thus the potential to reduce the number of revision hip arthroplasty surgeries required by wear failure of acetabular cups and diminish particle-induced osteolysis. The results of an in vitro study of viability and proliferation and interleukin-6 (IL-6) production suggest good cytocompatibility, similar to that of conventional UHMWPE (WST-1 assay results are reported as percentage of control ± SD: UHMWPE = 96.19 ± 7.92, MWCNT/UHMWPE = 97.92 ± 8.29%; total protein: control = 139.73 ± 10.78, UHMWPE = 137.07 ± 6.17, MWCNT/UHMWPE = 163.29 ± 11.81 µg/mL; IL-6: control = 90.93 ± 10.30, UHMWPE = 92.52 ± 11.02, MWCNT/UHMWPE = 108.99 ± 9.90 pg/mL). Standard cell culture conditions were considered as control. These results, especially the absence of significant elevation in the osteolysis inductor IL-6 values, reinforce the potential of this superior wear-resistant composite for future orthopedic applications, when compared to traditional UHMWPE.

Drag reduction by polyethylene glycol in the tail arterial bed of normotensive and hypertensive rats

This study was designed to evaluate the effect of drag reducer polymers (DRP) on arteries from normotensive (Wistar) and spontaneously hypertensive rats (SHR). Polyethylene glycol (PEG 4000 at 5000 ppm) was perfused in the tail arterial bed with (E+) and without endothelium (E-) from male, adult Wistar (N = 14) and SHR (N = 13) animals under basal conditions (constant flow at 2.5 mL/min). In these preparations, flow-pressure curves (1.5 to 10 mL/min) were constructed before and 1 h after PEG 4000 perfusion. Afterwards, the tail arterial bed was fixed and the internal diameters of the arteries were then measured by microscopy and drag reduction was assessed based on the values of wall shear stress (WSS) by computational simulation. In Wistar and SHR groups, perfusion of PEG 4000 significantly reduced pulsatile pressure (Wistar/E+: 17.5 ± 2.8; SHR/E+: 16.3 ± 2.7%), WSS (Wistar/E+: 36; SHR/E+: 40%) and the flow-pressure response. The E- reduced the effects of PEG 4000 on arteries from both groups, suggesting that endothelial damage decreased the effect of PEG 4000 as a DRP. Moreover, the effects of PEG 4000 were more pronounced in the tail arterial bed from SHR compared to Wistar rats. In conclusion, these data demonstrated for the first time that PEG 4000 was more effective in reducing the pressure-flow response as well as WSS in the tail arterial bed of hypertensive than of normotensive rats and these effects were amplified by, but not dependent on, endothelial integrity. Thus, these results show an additional mechanism of action of this polymer besides its mechanical effect through the release and/or bioavailability of endothelial factors.

Efeitos do cádmio sobre o crescimento das leveduras Saccharomyces cerevisiae PE-2 e Saccharomyces cerevisiae IZ-1904, e a capacidade da vinhaça em atenuar a toxicidade

O presente trabalho teve por finalidade estudar os efeitos do cádmio sobre a levedura Saccharomyces cerevisiae, bem como avaliar a possibilidade de se utilizar a vinhaça como fornecedora de agentes ligantes, visando minimizar os efeitos deletérios do mesmo. Primeiramente montou-se um ensaio visando observar a ação tóxica de diferentes concentrações de cádmio (0; 0,05; 0,1 e 0,5mM), avaliada pelo crescimento de duas cepas da levedura S. cerevisiae (PE-2 e IZ-1904) em meio YED. O meio foi inoculado com 1mL de uma suspensão a 1% (m/v) das respectivas cepas e incubado por 18 horas. Em tempos determinados durante o crescimento anaeróbio, alíquotas da suspensão de células foram retiradas e a concentração celular foi determinada. No final do ensaio, foram determinadas a viabilidade celular, a taxa de brotamento e a contaminação bacteriana. Os teores de trealose para cada tratamento, de ambas as cepas, foram dosados no início e no final do ensaio. Em uma segunda etapa, montou-se um ensaio visando avaliar a capacidade da vinhaça (0,15 e 30% do volume do meio) em atenuar os efeitos tóxicos de duas doses de cádmio (0,1 e 0,5mM), empregando-se a levedura S. cerevisiae PE-2 em meio YED. O meio foi inoculado com 2mL de uma suspensão a 1% (m/v) da levedura e incubado por 18 horas. Em tempos determinados durante o crescimento anaeróbio, alíquotas da suspensão de células foram retiradas e a concentração celular foi determinada. No final do ensaio, foram determinadas a viabilidade celular, a taxa de brotamento, a contaminação bacteriana e a produção de etanol. Os teores de trealose, para cada tratamento, foram dosados nas leveduras no início e no final do ensaio. O cádmio prejudicou o crescimento e a viabilidade celular das duas cepas da levedura S. cerevisiae. A vinhaça apresentou um discreto efeito tóxico, traduzido pela redução do crescimento. Porém, nos tratamentos contaminados com cádmio, apresentou um efeito protetor, minimizando os efeitos deletérios do metal.

Effect of pH, dextrose and yeast extract on cadmium toxicity on Saccharomyces cerevisiae PE-2

The aim of this study was to evaluate the effects of pH, dextrose and yeast extract on the cadmium toxicity on Saccharomyces cerevisiae PE-2. In the first assay, the YED mediums with different pH (2, 3, 4, 5, 6, 7, and 8) containing 0.0 and 0.05 mmol Cd L-1 were inoculated with yeast suspension and incubated at 30 °C for 18 hours. During the anaerobic growth, the biomass concentration was determined. The yeast trehalose content, cell viability, and the growth rate were assessed at the beginning and at the end of the growth stages. In the second assay the YED mediums were diluted to the total, ½, and ¼ content of dextrose and yeast and 0.0 and 0.05 mmol Cd L-1 were added. The pH of the mediums was adjusted to 5. The culture mediums were inoculated and incubated at 30 °C for 18 hours. The yeast growth was not affected by cadmium at high pH, but at low pH the yeast becomes more sensitive to the toxic effect. The yeast susceptibility to cadmium was enhanced by the decrease of yeast extract strength and the increase of dextrose strength.

A method to determine volatile contaminants in polyethylene terephthalate (PET) packages by HDC-GC-FID and its application to post-consumer materials

A simple and low cost method to determine volatile contaminants in post-consumer recycled PET flakes was developed and validated by Headspace Dynamic Concentration and Gas Chromatography-Flame Ionization Detection (HDC-GC-FID). The analytical parameters evaluated by using surrogates include: correlation coefficient, detection limit, quantification limit, accuracy, intra-assay precision, and inter-assay precision. In order to compare the efficiency of the proposed method to recognized automated techniques, post-consumer PET packaging samples collected in Brazil were used. GC-MS was used to confirm the identity of the substances identified in the PET packaging. Some of the identified contaminants were estimated in the post-consumer material at concentrations higher than 220 ng.g-1. The findings in this work corroborate data available in the scientific literature pointing out the suitability of the proposed analytical method.

Effect of different covering materials used during the pre-harvest stage on the quality and storage life of 'Sultana Seedless' grapes

Covering the grapevine rows to delay the maturity and harvest date became widely practiced in 'Sultana Seedless' vineyards. The research work was conducted to test different cover materials (polypropylene cross-stitch, life pack, mogul and transparent polyethylene) in respect to their effects on grape quality and storability. Harvest was delayed for one month in covered plots. Harvested grapes were packed and transferred to storage rooms after pre-cooling. During packing, the grape clusters were sealed in PE bags with sulphur dioxide pads. The grapes were stored for 90 days in the first year and 120 days in the second year, at -0.5ºC and 90% RH. All the grape clusters were healthy and of marketable quality after 90 days of storage period. In the first year, at the end of the storage, only those grapes harvested from the rows covered with polypropylene cross-stitch showed fungal growth. The sensory quality scores revealed a lower level of preference after 120 days of storage. The effects of the covering materials tested were similar regarding grape quality and storage performance except the transparent polyethylene that damaged the grapevine leaves.

Effect of previous chilling storage on quality loss in frozen (–20 °C) sierra (Scomberomorus sierra) muscle packed with a low-density polyethylene film containing butylated hydroxytoluene

Rancidity development during frozen storage (–20 °C) of sierra fish (Scomberomorus sierra) was studied. Fillets were packed in low-density polyethylene films with and without butylated hydroxytoluene added (BHT-LDPE and LDPE respectively). Fillets stored with no package were used as control. Special attention was given to the effect of previous ice storage (0, 3, 6, 9 and 15 days) on the quality of the frozen fish. Physical (pH and texture) and chemical (peroxide value, PV and thiobarbituric acid index, TBA-i) analyses were carried out. Lipid oxidation increased with ice storage time in fish muscle without film packing, being greater than the film packed muscle (with and without antioxidant). An effect of previous ice storage time was observed on the frozen product (in all treatments). However, fish muscle with film packing containing antioxidant showed less lipid deterioration. Under the conditions applied in this study, the plastic films with antioxidant prevented the lipids oxidation during the cold handling of the sierra muscle.