Grafting of quince 'Portugal' on Cydonia and Chaenomeles rootstocks

In the specific case of the quince trees, there is lack of information about the emergency of their seedlings, development and time of production of rootstocks to reach the point of the grafting, as well as development of the grafts. Therefore, the objective of the present research was to study the Cydonia and Chaenomeles genera, as well as the development of the grafts during the nursery phase. Seeds of the quince tree cultivars 'Mendoza Inta-37', 'Provence', ' Portugal' and 'Japonês' were obtained from ripe fruits and submitted to cold stratification during 20 days. Soon after, the seeds were sowed in 72-cell polystyrene trays (120 cm³ of capacity/cell) containing vermiculite as substrate. After 60 days, the seedlings were put in plastic bags (3 liters of capacity) filled with a substrate containing soil: sand: manure (1:1:1 v/v). The seedlings were kept in a 50% of shadow nursery and periodically irrigated. After 180 days, the seedlings were grafted by the cleft grafting method, during the winter, using scion sticks from quince 'Portugal'. After 60 days, the percentage of alive and sprouted grafts was evaluated. The length and diameter of the grafts were measured every 30 days, a total of four times. The quince 'Japonês' showed the best performance among all the rootstocks in this experiment, being an excellent alternative as rootstock for quince trees. 'Japonês' and 'Mendoza Inta-37' were also the rootstocks that promoted the best development of the grafts.

The carpal boss: a review of different sonographic findings

Carpal boss is an uncommon condition whose incidence is underestimated and that is frequently confused with other causes of development of tumor-like lesions on the dorsum of the wrist. From the clinical point of view, the main obstacle to its recognition is the nonspecificity of symptoms, frequently attributed to dorsal ganglion cysts, since both conditions share a similar location on the dorsum of the wrist. The assessment by ultrasonography allows for a correct diagnosis and appropriate management, with better chances of resolution of the clinical complaint and lower probability of iatrogenic worsening of the lesion. The present review is aimed at describing the different sonographic findings of carpal boss.

Accuracy of computer-aided ultrasound as compared with magnetic resonance imaging in the evaluation of nonalcoholic fatty liver disease in obese and eutrophic adolescents

AbstractObjective:To compare the accuracy of computer-aided ultrasound (US) and magnetic resonance imaging (MRI) by means of hepatorenal gradient analysis in the evaluation of nonalcoholic fatty liver disease (NAFLD) in adolescents.Materials and Methods:This prospective, cross-sectional study evaluated 50 adolescents (aged 11–17 years), including 24 obese and 26 eutrophic individuals. All adolescents underwent computer-aided US, MRI, laboratory tests, and anthropometric evaluation. Sensitivity, specificity, positive and negative predictive values and accuracy were evaluated for both imaging methods, with subsequent generation of the receiver operating characteristic (ROC) curve and calculation of the area under the ROC curve to determine the most appropriate cutoff point for the hepatorenal gradient in order to predict the degree of steatosis, utilizing MRI results as the gold-standard.Results:The obese group included 29.2% girls and 70.8% boys, and the eutrophic group, 69.2% girls and 30.8% boys. The prevalence of NAFLD corresponded to 19.2% for the eutrophic group and 83% for the obese group. The ROC curve generated for the hepatorenal gradient with a cutoff point of 13 presented 100% sensitivity and 100% specificity. As the same cutoff point was considered for the eutrophic group, false-positive results were observed in 9.5% of cases (90.5% specificity) and false-negative results in 0% (100% sensitivity).Conclusion:Computer-aided US with hepatorenal gradient calculation is a simple and noninvasive technique for semiquantitative evaluation of hepatic echogenicity and could be useful in the follow-up of adolescents with NAFLD, population screening for this disease as well as for clinical studies.

Encapsulation of naproxen in nanostructured system: structural characterization and in vitro release studies

Nanoparticles were produced by solvent emulsification evaporation method with the following characteristics: nanometric size (238 ± 3 nm), narrow polydispersity index (0.11), negative zeta potential (-15.1 mV), good yield of the process (73 ± 1.5%), excellent encapsulation efficiency (81.3 ± 4.2%) and spherical shape. X-rays diffraction demonstrated the loss of drug crystallinity after encapsulation; however, the profile of the diffractograms of the poly-ε-caprolactone (PCL) nanoparticles was kept. Differential scanning calorimetry thermograms, correspondingly, exhibited the loss of drug melting peak and the increasing of the melting point of the PCL nanoparticles, evidencing an interaction drug-polymer. Naproxen release was low and sustained obeying the Higuchi´s kinetic. The results show that nanoparticles are promising sustained release system to the naproxen.

Panorama de propriedade intelectual, transferência de tecnologia e inovação da química brasileira e a comparação com os países do BRIC

Based on Science, Technology & Innovation (ST&I) indicators, Brazil is a competitive and interesting country from the point of view of technological foreign investment. However, it is still incipient with regard to national investments, production of technological knowledge, inbound mobility of scientists and technology transfer to the productive sector. Among many other factors, global patent production is considered as an important indicator of innovation. Likewise, the balance between revenue and expenses obtained through royalties and licensing fees of technologies is also critical in mapping the diffusion and absorption of knowledge. The understanding of intellectual property and its strategic management brings a significant advantage to the economic and technological development of nations, especially in the field of chemistry, which greatly contributes to biotechnology, new materials and microelectronics - three fundamental areas for innovation in developed countries. Therefore, this article aims to map out competencies in chemistry in Brazil and evaluate science, technology and innovation indicators in the country, comparing this dynamic to the one of other BRIC members (Russia, India and China). Chemistry is the fourth biggest field of interest in Brazil based on the number of researchers registered at the governmental platform for researchers, Plataforma Lattes/CNPq, and is preceded by education, medicine and agronomy. The majority of research groups are registered in the area of materials, followed by macromolecules and polymers, pharmaceutical products and basic materials chemistry. These groups represent approximately 77% of research groups analyzed, therefore, indicating a tendency in the country. The analyses of patents in different sub-areas of chemistry reveal that non-residents file most deposits in the country, a probable reflection of the low internal intellectual property culture. Pharmaceutics and Fine Chemistry are prominent areas in the country, in line with the global trend. Among BRIC countries, China has the highest number of patents and of requests for protection in international offices. On the other hand, Brazil has the lowest number of chemical patents published at USPTO, EPO and JPO. An analysis of the transfer of technology data indicates an increase in this activity in various sub-areas of chemistry in the country. Despite the great efforts made by the country to consolidate its national innovation system, more needs to be done to put Brazil in a competitive position. In a globalized world dominated by large players, Brazil needs a lot of progress on ownership and generation of chemistry technologies to strengthen its national sovereignty. It is essential to strengthen chemical research at all levels, from elementary school to university, as an inexhaustible source of knowledge and technology that, when properly protected, may generate real public achievement and social return.

The role of petals in development of grey mould in strawberries

Studies were conducted in annual crops of strawberry (Fragaria x ananassa) (cv. Elsanta to assess the relative importance of petals as an inoculum source of grey mould, caused by Botrytis cinerea and to identify during which period of flower and fruit development the presence of petals has a significant effect on development of grey mould on fruits. In 1998, the incidence of B. cinerea on flower parts was assessed, and the symptoms of grey mould on fruits were characterised with regards to their starting point. The incidence of B. cinerea on petals was 65-85% of those flowers that harboured B. cinerea. The starting point of symptoms was located underneath the sepals in 65-85% of fruits with grey mould, and petals were present at this site in about 50% of the cases. In 1999, four field experiments were conducted to assess the effect of petal removal at different stages of flower and fruit development on incidence of grey mould. The incidence of grey mould on fruits with petals retained till harvest was circa 55% more than on fruits where petals were removed or had dropped naturally by the end of flowering, regardless of planting date or inoculum level of B. cinerea. The incidence of grey mould was hardly different between treatments where petals were removed at young flower stage, old flower stage, or green fruit stage. It is concluded that petals are an effective and stable source of inoculum for fruit infection by B. cinerea. Considering the high probability that retention of petals during fruit expansion and ripening results in fruit infection, the elimination of petals as an inoculum source appears worthwhile even when the incidence of petal retention on fruits is relatively low.

Immersion enthalpy variation of surface-modified mineral activated carbon in lead (II) aqueous solution adsorption: the relation between immersion enthalpy and adsorption capacity

An activated carbon was obtained by chemical activation with phosphoric acid, CM, from a mineral carbon. Afterwards, the carbon was modified with 2 and 5 molL-1, CMox2 and CMox5 nitric acid solutions to increase the surface acid group contents. Immersion enthalpy at pH 4 values and Pb2+ adsorption isotherms were determined by immersing activated carbons in aqueous solution. The surface area values of the adsorbents and total pore volume were approximately 560 m².g-1 and 0.36 cm³g-1, respectively. As regards chemical characteristics, activated carbons had higher acid sites content, 0.92-2.42 meq g-1, than basic sites, 0.63-0.12 meq g-1. pH values were between 7.4 and 4.5 at the point of zero charge, pH PZC. The adsorbed quantity of Pb2+ and the immersion enthalpy in solution of different pH values for CM activated carbon showed that the values are the highest for pH 4, 15.7 mgg-1 and 27.6 Jg-1 respectively. Pb2+ adsorption isotherms and immersion enthalpy were determined for modified activated carbons and the highest values were obtained for the activated carbon that showed the highest content of total acid sites on the surface.

Design of an adsorbent employing activated carbon fiber to remove lead

Zorflex® activated carbon fibers (ACF), reference FM100 198B, are used before and after an oxidizing procedure with H3PO4 to study the adsorption of Pb2+. The point of zero charge was determined for the modified and unmodified fiber giving values of 2.3 and 4.3, respectively. After oxidizing the ACF, the fiber showed to have a greater Pb2+ adsorption capacity in comparison with the unmodified fiber, which is related with the acid sites increase, where lead was mainly adsorbed. Determination of the BET area was carried out by nitrogen physisorption at 77K. ACFs presented superficial areas between 1000 and 1500 m²/g showing mostly, a microporous structure. The preliminary design of an adsorbent using the modified fiber is presented where the fiber superior physicochemical properties over the unmodified one are observed.

Comparison of the dehydration kinetics of solid state compounds of 2-methoxybenzylidenepyruvate with some divalent metal ions

Divalent metal complexes of ligand 2-methoxybenzylidenepyruvate with Fe, Co, Ni, Cu and Zn as well as sodium salt were synthesized and investigated in the solid state. TG curves of these compounds were obtained with masses sample of 1 and 5mg under nitrogen atmosphere. Different heating rates were used to characterize and study these compounds from the kinetic point of view. The activation energy and pre-exponential factor were obtained applying the Wall-Flynn-Ozawa method to the TG curves. The obtained data were evaluated and the values of activation energy (Ea / kJ mol-1) was plotted in function of the conversion degree (α). The results show that due to mass sample, different activation energies were obtained. The results are discussed mainly taking into account the linear dependence between the activation energy and the pre exponential factor, where was verified the effect of kinetic compensation (KCE) and possible linear relations between the dehydrations steps of these compounds.

BUDDHISM AND MODERNITY: IN THE MARGIN OF DONALD S. LOPEZ JR.'S "BUDDHISM AND SCIENCE

ABSTRACT The present article aims at setting the issue of the relationship between Buddhism and science in a historical and philosophical frame wider than that one taken into account by the international scholarship so far. The historical point of view allows us to conclude that the narrative that connects Buddhism with science is not based on features intrinsic to Buddhist thought. In fact, such narrative prospered thanks to the development of a dialectic, typical of the 18th and 19th centuries, between science and religion. The philosophical point of view allows us to conclude that such narrative is backed by a metaphysical-like thought that denies the specificity of both science and Buddhism.

The role of consistency in empirical science

Any inconsistent theory whose underlying logic is classical encompasses all the sentences of its own language. As it denies everything it asserts, it is useless for explaining or predicting anything. Nevertheless, paraconsistent logic has shown that it is possible to live with contradictions and still avoid the collapse of the theory. The main point of this paper is to show that even if it is formally possible to isolate the contradictions and to live with them, this cohabitation is neither desired by working scientists not desirable for the progress of science. Several cases from the recent history of physics and cosmology are analyzed.

The notion of process in nonstandard theory and in Whiteheadian metaphysics

In this article I intend to show that certain aspects of A.N. Whitehead's philosophy of organism and especially his epochal theory of time, as mainly exposed in his well-known work Process and Reality, can serve in clarify the underlying assumptions that shape nonstandard mathematical theories as such and also as metatheories of quantum mechanics. Concerning the latter issue, I point to an already significant research on nonstandard versions of quantum mechanics; two of these approaches are chosen to be critically presented in relation to the scope of this work. The main point of the paper is that, insofar as we can refer a nonstandard mathematical entity to a kind of axiomatical formalization essentially 'codifying' an underlying mental process indescribable as such by analytic means, we can possibly apply certain principles of Whitehead's metaphysical scheme focused on the key notion of process which is generally conceived as the becoming of actual entities. This is done in the sense of a unifying approach to provide an interpretation of nonstandard mathematical theories as such and also, in their metatheoretical status, as a formalization of the empirical-experimental context of quantum mechanics.

REPRODUCTIVE SYSTEM AND POLLEN FLOW IN PROGENIES OF Qualea grandiflora Mart., A TYPICAL SPECIES OF THE BRAZILIAN CERRADO

This study analyzed the reproductive system and the pollen dispersion pattern of Qualea grandiflora progenies. This is a typical species from the Brazilian Cerrado about which there are not too many studies from the genetics point of view. The study was conducted in an area of 2.2 hectares located in the Conservation Unit managed by the Forest Institute of the state of São Paulo, Brazil (Assis State Forest). Total genomic DNA of 300 seeds from 25 plants (12 seeds from each plant) was extracted and amplified using specific primers to obtain microsatellite markers. Results showed that selfing is frequent among adults and progenies, and the species reproduces by outcrossing between related and unrelated individuals (0.913). The single-locus outcrossing rate was 0.632, which indicates that mating between unrelated individuals is more frequent than between related plants. The selfing rate was low (0.087), that is, the species is allogamous and self-fertilization is reduced. About 35% of the plants in the progenies were full-sibs, and about 57%, half-sibs. Besides, about 8% of the progenies were selfing siblings. The genetic differentiation coefficient within progenies was 0.139, whereas the fixation rate was about 27%. The estimate of the effective size revealed that the genetic representativeness of descent was lower than expected in random mating progenies: The analyzed samples corresponded to only 13.2 individuals of an ideal panmictic population. In environmental recovery programs, seeds, preferably from different fruits, should be collected from 95 trees to preserve the genetic diversity of the species.

Warning system based on theoretical-experimental study of dispersion of soluble pollutants in rivers

Information about capacity of transport and dispersion of soluble pollutants in natural streams are important in the management of water resources, especially in planning preventive measures to minimize the problems caused by accidental or intentional waste, in public health and economic activities that depend on the use of water. Considering this importance, this study aimed to develop a warning system for rivers, based on experimental techniques using tracers and analytical equations of one-dimensional transport of soluble pollutants conservative, to subsidizing the decision-making in the management of water resources. The system was development in JAVA programming language and MySQL database can predict the travel time of pollutants clouds from a point of eviction and graphically displays the temporal distribution of concentrations of passage clouds, in a particular location, downstream from the point of its launch.

Energetic analysis of landrace varieties and hybrids of corn produced in different technological levels of management

The aim of this study was to analyze, under the energetic point of view, the cultivation of corn in three management systems (low, medium and high-tech), using two landrace varieties ('Argentino' and 'BR da Várzea'), a double hybrid cultivar (SHS 4080) and a simple hybrid (IAC 8333). Five performance indicators were used: energy efficiency, liquid cultural energy, cultural efficiency, energy balance and productive energy efficiency. From the perspective of family farming, it was verified the largest social importance of the systems under low and medium levels of technology, due to the increase employment capacity of rural labor. The liquid cultural energy and energy balance were more favorable for the system under high technological level, unlike cultural efficiency and productive energy efficiency, which were significantly higher for medium and low technological levels. The variety 'Argentino' showed lower productive energy efficiency. The variety 'BR da Várzea', on the other hand, presented the potential to generate energy as much as the hybrids. In general, the biggest sustainability in the corn crop was achieved when the management system under medium and lower levels of technology were used.