Different methods to assess yield temporal stability in rubber

The objective of this work was to assess, during six years, the temporal stability of natural rubber yield of 25 superior Hevea brasiliensis genotypes, using the Wricke, Eberhart & Russell, Lin & Binns, additive main effect and multiplicative interaction (AMMI) analysis, and harmonic mean of the relative performance of the genetic values (HMRPGV) methods. The IAC 40 and IAC 300 genotypes were identified as stable and high yielding by the Eberhart & Russell, Lin & Binns, HMRPGV, and AMMI Biplot methods. The ranking of the other more stable genotypes identified by these analyses was altered. The observed results in the AMMI Biplot agreed with those observed in the Wricke method for identifying stable, but lower yielding genotypes. The simultaneous use of different methods allows a more accurate indication of stable genotypes. Stability analyses based on different principles show agreement in indicating stable genotypes.

Estratificação ambiental pela análise da interação genótipo x ambiente em milho

O objetivo deste trabalho foi realizar a estratificação de ambientes de cultivo de milho nos Estados do Paraná, Minas Gerais e Bahia, por diferentes métodos, bem como determinar o grau de associação e divergência entre os métodos de estratificação. Foram avaliados quatro métodos: o tradicional de Lin; o de dissimilaridade ambiental; o de decomposição da interação genótipo x ambiente (GxA) em partes simples e complexa; e o de análise de fatores. Esses métodos foram aplicados a 48 híbridos experimentais de milho, avaliados em 11 ambientes de cultivo nos três Estados, divididos em dois conjuntos de experimentos. Além dos híbridos, foram avaliadas seis cultivares comerciais, utilizadas como testemunhas, comuns aos dois conjuntos. Verificou-se a predominância de interação GxA do tipo complexa. A decomposição da interação GxA em partes simples e complexa e a análise de fatores são métodos fortemente associados entre si, mas moderadamente associados aos demais. Além disso, esses métodos são mais rigorosos no processo de estratificação ambiental e ponderam de maneira mais eficiente a magnitude da interação GxA.

Migration of dissolved organic carbon in biochars and biochar-mineral complexes

The objective of this work was to determine the contribution of dissolved organic carbon (DOC) from a biochar mineral complex (BMC), so as to better understand the interactions between DOC, biochar, clay, and minerals during thermal treatment, and the effects of BMC on amended soils. The BMC was prepared by heating a mixture of a H3PO4-treated saligna biochar from Acacia saligna, clays, other minerals, and chicken manure. The BMC was applied to a sandy loam soil in Western Australia, where wheat was grown. Liquid chromatography-organic carbon detection (LC-OCD) tests were carried out on water extracts from the untreated biochar, the BMC, the BMC-amended soil, and on a control soil to measure the DOC concentration. LC-OCD tests provide a fingerprint of the DOC, which allows the fractions of DOC to be determined. Thermal processing enhanced the reaction of the A. saligna biochar with manure, clays and minerals, and affected the distribution of the DOC fractions. Notably, the process leads to immobilization of hydrophobic DOC and to an increase in the concentration of low-molecular-weight neutrals in the BMC. The application of the BMC to soil increases the DOC in the amended soil, especially the biopolymer fraction.

Agentes complexantes: podante, coronante e criptante classificação e nomenclatura

The scientific and practical interest in crown ethers as complexing agents for actions as well as for anions and neutral low molecular species is undeniable. New molecules with crown ether properties are constantly synthesized and new application discovered. This paper presents classification and nomenclature of the classical oligoethers (crown ethers): monocyclic coronands; oligocyclic spherical cryptands; and acyclic podands.

O estímulo ao empreendedorismo nos cursos de química: formando químicos empreendedores

The Universities, in Brazil and all over the world are currently going through a "second revolution" in which the socio-economical development is incorporated as part of their mission and science and knowledge play a key role for the development of the society. In this context, this article is directed towards the importance of entrepreneurship and the formation of technological entrepreneurs in the area of chemistry, with special attention to the teaching of entrepreneurship in the chemistry courses and its effect on students, universities and the job possibilities. This article also presents a short discussion on a basic entrepreneurship course for chemists and some suggestions of reading on entrepreneurship to those interested in get started in this area. What is presented here about entrepreneurship in chemistry can be applied to any other area of science and technology.

"Spin-Off" acadêmico: criando riquezas a partir de conhecimento e pesquisa

Technology companies created from University research are known as "Academic Spin-Off" (ASO). These innovative companies play an important role for the technological, economical and social development of a country. This work discusses some aspects of ASO companies and their importance to Universities. It is also presented a fictitious history of Prof. João, a chemical researcher who will create an ASO company from his academic research work illustrating the basic steps involved in this process.

Butyltin speciation in sediments from Todos os Santos Bay (Bahia, Brazil) by GC-PFPD

Butyltin compounds were investigated in surface sediments from 17 stations in Todos os Santos Bay. Analytical conditions for organotin determination in marine sediments were optimized for GC with pulsed flame photometric detection. Detection limits were: 5.4 µg kg-1 for TBT; 0.2 µg kg-1 for DBT; and 2.1 µg kg-1 for MBT, using a 610-nm filter. In general, TBT concentrations were low and in the range of

Uptake of Hg2+ from aqueous solutions by microporous titano- and zircono-silicates

Being mercury one of the most toxic heavy metals present in the environment, it is of major concern to develop cleanup technologies to remove it from wastewater and recover mercury polluted ecosystems. In this context, we study the potential of some microporous titanosilicates and zirconosilicates for taking up Hg2+ from aqueous solutions. These materials have unique chemical and physical properties, and here we are able to confirm that they readily remove Hg2+ from aqueous solutions. Moreover, the presence of the competitive Mg2+ and Na+, which are some of the dominant cations in natural waters, does not reduce the uptake capacity of some of these materials. Thus, several inorganic materials reported here may have important environmental applications, efficiently removing Hg2+ from aqueous solutions.

Extraction and isolation of dictamnine, obacunone and fraxinellone from Dictamnus dasycarpus Turcz. by supercritical fluid extraction and high-speed counter-current chromatography

Supercritical fluid extraction was used to extract active compounds from the Chinese traditional medicinal D. dasycarpus under the pressure of 30 MPa and temperature of 45 ºC. Further separation and purification was established by high-speed counter-current chromatography (HSCCC) with a two-phase solvent system composed of n-hexane-ethyl acetate-methanol-water (1:0.8:1.3:0.9, volume ratio). The separation yielded a total of 47 mg of dictamnine, 24 mg of obacunone and 83 mg of fraxinellone from 1.0 g of the crude extract in one step separation with the purity of 99.2, 98.4 and 99.0%, respectively, as determined by HPLC. The chemical structures of these compounds were identified by ESI-MS, IR, ¹H-NMR and 13C-NMR.

Preparative separation and purification of bufadienolides from ChanSu by high-speed counter-current chromatography combined with preparative HPLC

Eight bufadienolides were successfully isolated and purified from ChanSu by high-speed counter-current chromatography (HSCCC) combined with preparative HPLC (prep-HPLC). First, a stepwise elution mode of HSCCC with the solvent system composed of petroleum ether - ethyl acetate - methanol - water (4:6:4:6, 4:6:5:5, v/v) was employed and four bufadienolides, two partially purified fractions were obtained from 200 mg of crude extract. The partially purified fractions III and VI were then further separated by prep-HPLC, respectively, and another four bufadienolides were recovered. Their structures were confirmed by ESI-MS and ¹H-NMR spectra.

Preparative separation of polyphenols from artichoke by polyamide column chromatography and high-speed counter-current chromatography

An efficient method for the rapid separation and purification of polyphenols from artichoke by polyamide column chromatography in combination with high-speed counter-current chromatography (HSCCC) was successfully built. The crude ethanol extracts from dry artichoke were first pre-separated by polyamide column chromatography and divided in two parts as sample 1 and sample 2. Then, the samples were further separated by HSCCC and yielded 7.8 mg of chlorogenic acid (compound I), 24.5 mg of luteolin-7-O-β-D-rutinoside (compound II), 18.4 mg of luteolin-7-O-β-D-glucoside (compound III), and 33.4 mg of cynarin (compound IV) with purity levels of 92.0%, 98.2%, 98.5%, and 98.0%, respectively, as determined by high-performance liquid chromatography (HPLC) method. The chemical structures of these compounds were identified by electrospray ionization-mass spectrometry (ESI-MS) and nuclear magnetic resonance (NMR).

Determination of sulfate in the wet-process of phosphoric acid by reverse flow injection

An improved method based on reverse flow injection is proposed for determining sulfate concentration in the wet-process of phosphoric acid (WPA). The effect of reagent composition, flow rate, temperature, acid concentration, length of the reaction coil, and linear response range on the flow system is discussed in detail. Optimal conditions are established for determining sulfate in the WPA samples. Baseline drift is avoided by a periodic washing step with EDTA in an alkaline medium. A linear response is observed within a range of 20 - 360 mg L-1, given by the equation A = 0.0020C (mg L-1) + 0.0300, R² = 0.9991. The detection limit of the proposed method for sulfate analysis is 3 mg L-1, and the relative standard deviation (n = 12) of sulfate absorbance peak is less than 1.60%. This method has a rate of up to 29 samples per hour, and the results compare well with those obtained with gravimetric method.

Formando grupos no internato: critérios de escolha, satisfação e sofrimento psíquico

OBJETIVO: Descrever os critérios para formação de grupos no internato e a avaliação que os alunos fazem do relacionamento grupal, analisando as variáveis associadas. MÉTODO: Trata-se de um estudo transversal, que utilizou questionário autopreenchido, com perguntas sobre dados sociodemográficos, autoavaliação do desempenho escolar, critérios para formação e satisfação com grupo de internato. Sofrimento psíquico foi avaliado a partir do Self Report Questionnaire. Utilizou-se o teste do qui-quadrado e regressão logística para análise multivariada. RESULTADOS:A taxa de resposta no internato foi de mais de 90%. A maioria dos alunos utilizou critérios ligados à rede social (82,6%) e predominaram sujeitos satisfeitos com seu grupo (81,2%). Após análise multivariada, apenas autoavaliação do desempenho escolar "boa ou ótima" e critérios de escolha relacionados à rede de apoio se mantiveram associados à satisfação com o grupo. CONCLUSÕES: Apesar de ser um estágio da formação profissional, os alunos se escolheram por questões ligadas à rede social. Sendo uma profissão na qual o trabalho em equipe é inerente, deveriam ser criadas estratégias durante o curso médico para elaborar as dificuldades de relacionamento grupal entre alunos de Medicina.

Geoprocessamento para identificar padrões do perfil de nascimentos na região do Vale do Paraíba

OBJETIVO: aplicar técnicas de geoprocessamento para a análise espacial do perfil de nascimentos por município. MÉTODOS: foi um estudo ecológico e exploratório com dados do Sistema de Informações de Saúde sobre nascidos vivos de 2004 e utilizando técnicas de geoprocessamento. Foram estimadas as autocorrelações espaciais das variáveis: parto cesáreo, escolaridade materna, baixo peso ao nascer, escore de Apgar de cinco minutos, prematuridade, número de consultas e mães adolescentes, além do mapa com o índice de desenvolvimento humano. Foi utilizada a estatística I de Moran para detecção de agregados de eventos no espaço, pelo programa TerraView 3.1.3 (desenvolvido pelo Instituto Nacional de Pesquisas Espaciais - INPE e de acesso público). Foram construídos mapas espaciais com estas variáveis e estimados os coeficientes de correlação de Pearson. RESULTADOS: os resultados mostraram que as proporções de nascidos vivos de mães com escolaridade acima de primeiro grau e de cesáreas, apresentaram padrão espacial visualmente identificável e autocorrelação espacial significativa. O baixo peso ao nascer, a prematuridade, o índice de Apgar, o número de consultas de pré-natal e o de mães adolescentes apresentaram padrão espacial aleatório, demonstrando que, nesta escala de análise, estes indicadores não discriminaram grupos de risco, apesar do seu inquestionável valor preditivo para morbimortalidade infantil em nível individual. Houve correlação positiva entre parto cesáreo e escolaridade, e entre parto cesáreo e índice de desenvolvimento humano e correlação negativa entre mães adolescentes e índice de desenvolvimento humano, com significância estatística (p<0,05). CONCLUSÕES: esta metodologia permitiu identificar aglomerados espaciais para as variáveis parto cesáreo e escolaridade materna, além de aprofundar o conhecimento sobre o perfil de nascimentos nos municípios, apresentando potencial no direcionamento de ações voltadas para áreas específicas.

Validação de questionário para avaliar a função sexual feminina após menopausa

OBJETIVO: elaborar e validar um questionário para medir os diferentes domínios da função sexual nas mulheres brasileiras pós-menopausa. MÉTODOS: participaram deste estudo 251 mulheres entre 2 e 15 anos após menopausa. Foi examinada a reprodutibilidade/confiabilidade do instrumento pelos coeficientes de correlação linear, intraclasse e concordância de Lin. A consistência interna foi examinada pelo coeficiente α de Cronbach. A verificação da face, conteúdo e construto seguiram diretrizes teóricas clássicas para validação de testes. RESULTADOS: foi gerado um instrumento inicial com 57 itens estruturados em nove domínios. Foram eliminados 14 (24,5%) questões por baixa correlação com a escala total ou pequeno poder de discriminação. A forma final com 43 itens demonstrou excelente reprodutibilidade (r=0,719; IC95%=0,690-0,750; pc=0,887; IC95%=0,850-0,930; p<0,001) e confiabilidade. A consistência interna da escala foi excelente (α de Cronbach 0,951) e cerca de 60% dos avaliadores confirmaram as validades de face e conteúdo. O exame da validade de construto mostrou adequação do instrumento (α=0,951). CONCLUSÕES: concluiu-se que o questionário proposto é adequado para examinar a função sexual feminina em mulheres pós-menopausa.