Evaluation of roof slope and exposure with different roofing materials in reduced models of animal production facilities in spring and summer

The present study was conducted at the Department of Rural Engineering and the Department of Animal Morphology and Physiology of FCAV/Unesp, Jaboticabal, SP, Brazil. The objective was to verify the influence of roof slope, exposure and roofing material on the internal temperature of reduced models of animal production facilities. For the development of the research, 48 reduced and dissemble models with dimensions 1.00 × 1.00 × 0.50 m were used. The roof was shed-type, and the models faced to the North or South directions, with 24 models for each side of exposure. Ceramic, galvanized-steel and fibro tiles were used to build the roofs. Slopes varied between 20, 30, 40 and 50% for the ceramic tile and 10, 30, 40 and 50% for the other two. Inside the models, temperature readings were performed at every hour, for 12 months. The results were evaluated in a general linear model in a nested 3 × 4 × 2 factorial arrangement, in which the effects of roofing material and exposure were nested on the factor Slope. Means were compared by the Tukey test at 5% of probability. After analyzing the data, we observed that with the increase in the slope and exposure to the South, there was a drop in the internal temperature within the model at the geographic coordinates of Jaboticabal city (SP/Brazil).

Advanced ceramics: evaluation of the mechanism of stock removal and ground surface quality

The aim of this work is to evaluate the mechanism of stock removal and the ground surface quality of advanced ceramics machined by a surface grinding process using diamond grinding wheels. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for ceramic workpieces. The ground surface was evaluated using Scanning Electron Microscopy (SEM). As a result it can be said that the mechanism of material removal in the grinding of ceramic is largely one of brittle fracture. The increase of the h max can reduce the tangential force required by the process. Although, it results in an increase in the surface damage, reducing the mechanical properties of the ground component.

Uniform decrease of alpha-global field power induced by intermittent photic stimulation of healthy subjects

Nineteen-channel EEGs were recorded from the scalp surface of 30 healthy subjects (16 males and 14 females, mean age: 34 years, SD: 11.7 years) at rest and under trains of intermittent photic stimulation (IPS) at rates of 5, 10 and 20 Hz. Digitalized data were submitted to spectral analysis with fast fourier transformation providing the basis for the computation of global field power (GFP). For quantification, GFP values in the frequency ranges of 5, 10 and 20 Hz at rest were divided by the corresponding data obtained under IPS. All subjects showed a photic driving effect at each rate of stimulation. GFP data were normally distributed, whereas ratios from photic driving effect data showed no uniform behavior due to high interindividual variability. Suppression of alpha-power after IPS with 10 Hz was observed in about 70% of the volunteers. In contrast, ratios of alpha-power were unequivocal in all subjects: IPS at 20 Hz always led to a suppression of alpha-power. Dividing alpha-GFP with 20-Hz IPS by alpha-GFP at rest (R = alpha-GFP IPS/alpha-GFPrest) thus resulted in ratios lower than 1. We conclude that ratios from GFP data with 20-Hz IPS may provide a suitable paradigm for further investigations.

Tangential microfiltration of orange juice in bench pilot

The aim of this study was to introduce the tangential microfiltration (TMF) technique on the production of orange juice (TMFJ), and compare it with pasteurised juice (control) as regards chemical composition and sensorial characteristics. We used a TMF pilot equipped with four monotubular ceramic membranes (0.1, 0.2, 0.8 and 1.4mm) arranged in series with a filtering area of 0.005 m² each. Commercial flash-pasteurised orange juice was used as the initial product. Experiments were divided into three parts: a) the characterisation of the TMF pilot; b) optimisation of operational conditions; c) production of the TMFJ. In the second part, membrane with 0.8-mm pores presented best flux followed by those with 1.4-, 0.1-, and 0.2-mm pores. However, to guarantee permeate sterility, we chose the membrane with 0.1-mm pores for TMFJ production. Initially, the orange juice was sieved in order to separate part of the pulp, being subsequently submitted to TMF. A mixture of retentate and pulp was made, and was subsequently pasteurised. We obtained the TMFJ by adding the permeate to the mixture. TMFJ presented soluble solids content (°Brix), pulp, pH, and titrable acidity similar to the initial pasteurised juice (control). Nevertheless, 28% of vitamin C was lost during the TMFJ production. According to the juice taster panel, the control juice presented best sensorial characteristics (greater aroma intensity and fruity flavour) when compared with the TMJF.

Influence of depectinization in the ultrafiltration of West Indian cherry (Malpighia glabra L.) and pineapple (Ananas comosus (L.) Meer) juices

West Indian cherry (Malpighia glabra L.) and pineapple (Ananas comosus (L.) Meer)juice clarification by cross-flow UF, using polysulphone hollow fiber and ceramic tubular membranes with, respectively, nominal molecular weight cut off values of 100kDaltons and average pore diameters of 0.01mm, were studied. The influence of enzymatic treatment using enzyme concentrations of 20, 100 and 300mg/L, a time of 90min and a temperature of 40ºC for depectinization was verified. The juices were then clarified in a laboratory scale filtration unit, with an effective filtration area of 0.12m² for the polysulphone hollow fiber membrane and of 0.005m² for the ceramic tubular membranes. The influence of enzymatic treatment on viscosity, turbidity and total pectin of the juice, before ultrafiltration, is reported. Membrane performance was evaluated in terms of flow rate and clarity of the permeate. The permeate flow rate of depectinized pineapple juice was higher (30 - 60%) for both membranes. Depectinized West Indian cherry juice presented a lower permeate flow rate for the polysulphone hollow fiber membrane. The increase in permeate flow rate, with the use of the 300mg/L and 100mg/L enzyme concentration was not significant, so it is economically advantageous to ultrafilter depectinized juice, treated with an enzyme concentration of 20mg/L.

Caracterização química e nutricional de plasteína produzida a partir de hidrolisado pancreático de isolado protéico de soja

O presente trabalho teve como objetivo realizar a caracterização química e nutricional da plasteína produzida a partir de isolado protéico de soja (IPS). O hidrolisado de IPS foi produzido em sistema descontínuo, 5% de substrato, relação enzima/substrato 1/20, 6 h, 37°C, sob agitação. A plasteína foi produzida com 40% de substrato em solução aquosa, pH 7, 24 h a 37°C, sob repouso. Na caracterização química, foi verificada a distribuição dos pesos moleculares por meio de eletroforese (SDS-PAGE) e cromatografia de exclusão molecular (CEM). A SDS-PAGE não permitiu a visualização das bandas tanto no hidrolisado quanto na plasteína. Na CEM o hidrolisado apresentou 5 frações de PM na faixa de 5,4 a 66,2 kDa e a plasteína com 2 frações de PM na faixa de 9,6 e 58,7 kDa. O escore químico de aminoácidos essenciais confirmou a presença dos aminoácidos sulfurados como limitantes, sendo obtidos os valores de 93,2 e 96,4% para o hidrolisado e plasteína, respectivamente. A modificação enzimática através da reação de síntese de plasteína mostrou ser um processo viável na produção de matéria-prima para formulações alimentares de uso em nutrição clínica e em outros sistemas, sendo necessária a suplementação de metionina quando utilizada como fonte exclusiva de proteína.

Isolado protéico de semente de goiaba (Psidium guajava): caracterização de propriedades funcionais

Isolados protéicos (IPs) foram obtidos a partir da farinha da semente de goiaba (Psidium guajava) por extração a diferentes pHs seguido de precipitação isoelétrica (pI 4,5). As condições para o preparo do IP foram definidas a partir da curva de solubilidade, em pH 10,0 e 11,5, na ausência de NaCl e em temperatura de 25 ± 3 ºC. Essas condições levaram a um rendimento na extração de 45,19 e 66,23%, e teor protéico de 96,4 e 93,5% para IP 10,0 e 11,5, respectivamente. Capacidade de absorção de água e óleo de 1,05 ± 0,07 e 2,30 ± 0,01 mL.g-1 proteína e 1,65 ± 0,07 e 1,70 ± 0,07 mL.g-1 proteína foram obtidos, respectivamente, para IP 10,0 e IP 11,5. Não foram observadas diferenças entre os IPs quanto à atividade e estabilidade de emulsão, atingindo valores similares e superiores ao IP de outras sementes. Formação de gel, em pH neutro e ausência de sal, exigiram concentrações de 8 e 10% para IP 10,0 e IP 11,5, respectivamente. Maior capacidade de formação de espuma foi obtida para IP 10,0 em pH neutro e alcalino, apresentando valores de até 90% do volume inicial, por outro lado, para estabilidade de espuma, ambos IPs apresentaram boas propriedades até duas horas após a formação da espuma.

Desenvolvimento de massa alimentícia fresca funcional com a adição de isolado protéico de soja e polidextrose utilizando páprica como corante

A tendência do consumidor atual é utilizar alimentos de fácil preparo que, adicionalmente à qualidade nutritiva, tragam benefícios à saúde. Neste trabalho, uma massa alimentícia fresca funcional foi desenvolvida pela incorporação de Isolado Protéico de Soja (IPS) e polidextrose, utilizando páprica como corante. O consumo de IPS pode contribuir para a diminuição dos níveis de colesterol, enquanto a polidextrose, funcionando como fibra, pode promover a redução de risco de câncer de cólon. A otimização da formulação foi realizada utilizando-se um delineamento fatorial completo 23, considerando como variáveis independentes os teores de: i) IPS; ii) polidextrose; e iii) páprica. Os efeitos destas variáveis na qualidade da massa alimentícia foram avaliados em função das características físico-químicas (cor e teste de cozimento), textura instrumental e propriedades sensoriais. Na avaliação dos parâmetros físicos, observou-se que a cor instrumental da massa crua foi influenciada apenas pelo teor de páprica; já o tempo de cozimento (2,5 minutos), o aumento de massa (1,40 a 1,64%) e a perda de sólidos (3,80 a 5,56%) não foram influenciados pelos ingredientes utilizados; e a elasticidade (parâmetro da textura instrumental) foi reduzida com o aumento do teor de polidextrose. Na avaliação sensorial da massa crua, o aumento na porcentagem de IPS e a redução na porcentagem de polidextrose afetaram positivamente a aceitação global e a intenção de compra; e os aumentos nas porcentagens de IPS e de páprica aumentaram a aceitação da cor. Na avaliação sensorial da massa cozida, observou-se que o IPS teve influência positiva sobre a textura, enquanto que a polidextrose e a páprica afetaram negativamente este parâmetro. Entretanto, na avaliação da intenção de compra da massa cozida, não houve influência dos ingredientes adicionados. Os percentuais ideais de adição de polidextrose, isolado protéico de soja e páprica foram de 3,5, 8,0 e 1,5%, respectivamente.