Disponibilidade de cobre, ferro, manganês e zinco em solos sob pastagens na Região do Cerrado

Este trabalho teve como objetivo descrever os teores totais e disponíveis de cobre, ferro, manganês e zinco e suas relações com a acidez, fertilidade, textura e mineralogia de latossolos sob pastagens na Região do Cerrado. Os solos estudados foram amostrados em três regiões: às margens das rodovias GO-060 e BR-154, entre os municípios de Goiânia, GO, e Barra do Garças, MT; no Distrito Federal, e nos municípios de Unaí e Paracatu, noroeste de Minas Gerais. Coletaram-se 54 amostras na camada de 0-20 cm. Relacionaram-se as quantidades disponíveis de Cu, Fe, Mn e Zn (extraídos com DTPA) com seus teores totais, textura, mineralogia e variáveis químicas dos solos, por meio da análise de componentes principais. Os teores totais e disponíveis desses elementos foram extremamente variáveis. A disponibilidade de Fe, Cu e Mn se relacionou principalmente com os teores de ferro cristalino e com o pH em água. A disponibilidade de Zn se relacionou principalmente com a capacidade de troca catiônica do solo. O Zn é, entre os micronutrientes avaliados, o mais freqüentemente limitante ao desenvolvimento das pastagens na Região do Cerrado.

Eficiência simbiótica de estirpes de Cupriavidus necator tolerantes a zinco, cádmio, cobre e chumbo

O objetivo deste trabalho foi avaliar a tolerância de estirpes de Cupriavidus necator a zinco, cádmio, cobre e chumbo, além de determinar a eficiência simbiótica das estirpes mais tolerantes em associação a espécies leguminosas com potencial para revegetação. A tolerância foi testada em meio LB, suplementado com 2,5; 5,0; 7,5; 10; 12,5 e 15 mmol L-1 de ZnSO4.7H2O, CdSO4.8H2O, CuSO4.5H2O e PbCl2, respectivamente, em comparação ao controle sem adição de metal. Determinou-se a eficiência simbiótica das quatro estirpes de C. necator mais tolerantes aos metais avaliados (UFLA02-71, UFLA02-73, UFLA01-659 e UFLA01-663), as quais foram inoculadas nas espécies: Leucaena leucocephala, Enterolobium contortisiliquum, Acacia mangium, Mimosa caesalpiniifolia, M. pudica, M. pigra e M. acutistipula. Em vasos com solos, avaliaram-se L. leucocephala, M. pudica e M. caesalpiniifolia e as estirpes UFLA01-659 e UFLA02-71, selecionadas na avaliação de eficiência simbiótica. A estirpe UFLA02-71 proporcionou incrementos de matéria seca da parte aérea de 870% em M. caesalpiniifolia, enquanto que UFLA01-659 proporcionou 885% em M. pudica e 924% em L. leucocephala. As estirpes UFLA01-659 e UFLA02-71, além da alta tolerância a metais pesados, apresentaram eficiência em fixar nitrogênio, em simbiose com essas leguminosas, em solos com rizóbios nativos capazes de nodulá-las, e devem ser avaliadas quanto ao seu potencial de utilização em programas de recuperação de áreas degradadas.

CRESCIMENTO E OXIDAÇÃO DE EXPLANTES DE BANANEIRA-PRATA (Musa AAB) IN VITRO: I. CONCENTRAÇÕES DE SAIS DE FERRO, COBRE E ZINCO

Este experimento teve como objetivo avaliar a influência de diferentes concentrações de ferro, cobre e zinco do meio MS (MURASHIGE & SKOOG, 1962) no controle da oxidação de explantes iniciais de bananeira-Prata (Musa AAB). Foram utilizadas três concentrações (100, 50 e 0 miM) de FeEDTA, duas concentrações (0,1 e 0miM) de (CuSO4).5H2O e duas concentrações (30 e 0miM) de (ZnSO4).7H2O, num delineamento inteiramente casualizado, arranjado em um fatorial completo 3 x 2 x 2, utilizando-se de 15 repetições. Ápices caulinares foram inoculados em meio MS modificado e, decorridos 28 dias após a inoculação, avaliaram-se a massa de matéria fresca, altura e grau de oxidação. Observou-se que esses micronutrientes são essenciais para o crescimento dos explantes e que a concentração de ferro influencia na oxidação de explantes, sendo que maiores graus de escurecimento foram observados nas concentrações mais elevadas. A redução ou retirada destes elementos do meio MS, isoladamente ou em combinações, não foi suficiente para eliminar a oxidação dos explantes.

Modelagem dos processos químicos em plasmas de misturas gasosas usadas na corrosão de silício. Parte 1: CF4 / O2

The plasma etching of semiconductor surfaces with fluorine-containing compounds has technological interest. Presently, considerable effort is being devoted to understand the chemistry involved. In this work, a numerical modeling analysis of the gas-phase decomposition of CF4/O2 mixtures, in the presence of silicon, was performed. The relative importance of individual processes was determined as well as the effect of the parameters' uncertainties. The results were compared with experimental data. The main etching agent in the system is the fluorine atom. The concentration of the main species, SiF4, CO, CO2 and COF2 depend on the composition of the mixture.

Modelagem dos processos químicos em plasmas de misturas gasosas usadas na corrosão de silício. Parte 2: SF6 / O2

In this work, a numerical modeling analysis of the gas-phase decomposition of SF6 / O2 mixtures, in the presence of silicon, was performed. The relative importance of individual processes and the effect of the parameters' uncertainties were determined. The model was compared with experimental data for the plasma etching of silicon and with the calculated results for the CF4 / O2 system. In both systems the main etching agent is the fluorine atom and the concentration of the major species depends on the composition of the mixture. The etching rate is greater for SF6 / O2.

Sulfitos duplos contendo cobre (I) e um metal de transição M(II) tipo Cu2SO3.M(II)SO3.2H 2O [M(II) = Cu(II), Fe(II), Mn(II) e Cd(II)]: preparação e seletividade na incorporação de M(II)

The metal-catalyzed autooxidation of S(IV) has been studied for more than a century without a consensus being obtained as to reaction rates, rate laws or mechanisms. The main objective in this work was to explore the reaction between Cu(II) and SO2 in the presence of M(II), paying special attention to the formation of double sulfites like Cu2SO3.M(II)SO3.2H 2O. The two principal aspects studied were: i) a new way to prepare double sulfites with high purity degree and the selectivity in the M(II) incorporation during the salt formation.

Caracterização química e física de vermicomposto e avaliação de sua capacidade em adsorver cobre e zinco

The physical and chemical characterization of vermicompost from bovine manure has been studied. It was examined the pH and cation exchangeable capacity (CEC), organic matter content, electric conductivity and elementary and XRD analyses, among other characteristics. The vermicompost was then applied to the retention and competition of metal micronutrients and pollutants (Cu and Zn) from metal nitrate solutions. The retention was affected by both the pH and adsorption time, while the competitive character of these metals for the substrate was relevant to each pH examined.

Propriedades texturais e catalíticas de óxidos de ferro contendo cromo e cobre

Chromium and copper-doped hematites were prepared with the aim of studying the synergistic effect of these dopants on the textural and on the catalytic properties of the iron oxides towards the high temperature shift reaction. It was found that the most active catalysts were those with the highest amount of copper. They had the Fe(II)/Fe(III) ratio near the stoichiometric value of magnetite, the highest surface areas under the reactional atmosphere and the greatest tendency to produce the active form; they also were poorly crystalline solids. The best performance was shown by the catalyst with Fe/Cu=10, heated at 300ºC. It can thus be concluded that copper acts both as textural and structural promoter in these catalysts.

Estudo voltamétrico do complexo de cobre(II) com o ligante vermelho de alizarina S, adsorvido na superfície do eletrodo de grafite pirolítico

The alizarin red S (ARS) has been used as a spectrophotometric reagent of several metals for a long time. Now this alizarin has been used as modifier agent of electrodes, for voltammetric analyses. In this work cyclic voltammetry experiments was accomplished on closed circuit, with the objective of studying the voltammetric behavior of alizarin red S adsorbed and of its copper complex, on the surface of the pyrolytic graphite electrode. These studies showed that ARS strongly adsorbs on the surface of this electrode. This adsorption was used to immobilize ions copper(II) from the solution.

Método potenciométrico para determinação de cobre em cachaça

'Cachaça' is the Brazilian name for the spirit obtained from sugarcane. According to Brazilian regulations, it may be sold raw or with addition of sugar and may contain up to 5 mg/L of copper. Copper in "cachaça" was determined by titration with EDTA, using a homemade copper membrane electrode for end-point detection. It was found a pooled standard deviation of 0,057 mg/L and there was no significant difference between the results obtained by the potentiometric method and by flame atomic absorption spectrometry with standard addition. Among the 21 'cachaça' samples from 16 different brands analyzed, three overpassed the legal copper limit. For its characteristics of accuracy, precision, and speed, the potentiometric method may be employed advantageously in routine analysis, specially when low cost is a major concern.

Eletrodissolução de ligas de latão empregando sistemas de análise em fluxo para a determinação de cobre, zinco e chumbo por ICP-AES

An on-line electrodissolution procedure implemented in a flow injection system for determination of copper, zinc and lead in brasses alloys by ICP-AES is described. Sample dissolution procedure was carried out by using a PTFE chamber and a DC power supply with constant current. Solid sample was attached to chamber as anode and a gold tubing coupled in the chamber was used as cathode. An electrolytic solution flowing through the gold tubing closed the electric circuit with sample, in order to provide condition for electric dissolution when the DC power supply was switched on. The best results were achieved by using a 1.5 mol l-1 nitric acid solution as electrolyte and a 2.5 A current intensity. The procedure presented a good performance characterized by a relative standard deviation better than < 5% (n=5) and a sample throughput of 180 determinations per hour for Cu, Zn and Pb. Results were in agreement with those obtained by conventional acid dissolution (99% confidence level).

Processo alternativo para remoção de cobre (II) e níquel (II) de soluções aquosas utilizando cápsulas de quitosana - Álcool Polivinílico

Capsules were prepared from chitosan (QTS)-poly(vinyl alcohol) (PVA) blend by saline coacervation and then by formalization. A adsorbent based on chitosan, insoluble on acid solution, was obtained. The morphology, average diameters of QTS/PVA capsules and their pores were studied by using scanning electron microscopy. The entrapment-adsorption of dimethylglioxime and ethylenediaminetetracetate by the capsules were studied. The removal of the ion nickel (II) and copper (II), was more effective than by using unloaded capsules.

Complexação da tetraciclina, da oxitetraciclina e da clortetraciclina com o catião cobre (II). Estudo potenciométrico

Stability constants of complexes formed by copper (II) with three different tetracyclines (tetracycline, oxytetracycline and chlortetracycline) have been determined potentiometrically with an automatic system in aqueous medium at 25,0 ± 0,2 ºC and I = 0,1 mol L-1 NaNO3. The protonation constants of the three tetracyclines were also determined under the same conditions. The distribution of the complexes was then simulated at therapeutic levels of the drugs.

Caracterização química e física de turfa litorânea e avaliação da adsorção competitiva por cobre e zinco

The chemical and physical characterization of coastal peat has been studied. It was examined the pH, organic matter content and elementary and XRD analyses, among other characteristics. The peat was then applied to the retention and competition of metal micronutrients (Cu and Zn) from metal nitrate solutions. The retention was affected by both the pH and time of adsorption, while the competitive character of these metals for the substrate was relevant to each pH examined.

Construção e otimização de um reator de baixo custo para a fotodegradação da matéria orgânica em águas naturais e sua aplicação no estudo da especiação do cobre por voltametria

This work describes the construction of a home-made low-cost reactor, using easily available materials, capable of destroying efficiently dissolved organic matter. Just 30 minutes of irradiation were sufficient to destroy more than 99% of the humic acids present in a solution of 4 mg C L-1. Copper speciation was evaluated in natural waters of different salinities to test the reactor's efficiency in destroying organically complexed metal species. The effect of the organic matter concentration, salinity, dissolved oxygen and temperature in the photo-oxidation process is discussed.