Clinical and videofluoroscopic diagnosis of dysphagia in chronic encephalopathy of childhood

Objective To evaluate the contribution of deglutition videofluoroscopy in the clinical diagnosis of dysphagia in chronic encephalopathy of childhood. Materials and Methods The study sample consisted of 93 children diagnosed with chronic encephalopathy, in the age range between two and five years, selected by convenience among patients referred to the authors' institution by speech therapists, neurologists and gastroenterologists in the period from March 2010 to September 2011. The data collection was made at two different moments, by different investigators who were blind to each other. Results The method presented low sensitivity for detecting aspiration with puree consistency (p = 0.04). Specificity and negative predictive value were high for clinical diagnosis of dysphagia with puree consistency. Conclusion In the present study, the value for sensitivity in the clinical diagnosis of dysphagia demonstrates that this diagnostic procedure may not detect any change in the swallowing process regardless of the food consistency used during the investigation. Thus, the addition of the videofluoroscopic method can significantly contribute to the diagnosis of dysphagia.

As primeiras vinte reuniões anuais da SBQ: uma visão da evolução da química no Brasil

An analysis of the different activities carried out during the first twenty annual meetings (1978-1997) of the Brazilian Chemical Society (SBQ) is presented. The number of papers in the abstract book increased from around 300 in the biennium 78/79 to around 1230 in 96/97. The papers contained in the different sections of the abstract book in the 1st (1978), 10th (1987) and 19th (1996) annual meetings were grouped according to the regions of Brazil the authors' institutions were from, or abroad, and also considering whether the paper came from one institution or was a collaboration between two or more institutions. The relative contribution of the southeastern and northern regions decreased from 77% and 3.0% of the total in 1978 to 63% and 1.2% in 1996, respectively, while those of the northeastern, southern and midwestern regions increased from 12%, 4.8% and 0.6% to 15%, 13%, and 2.6%, respectively; the relative contribution of institutions from abroad also increased from 2.4% to 4.0%. Chemistry of Natural Products and Organic Chemistry decreased their relative contribution from around 55% in 1978 to around 28% in 1996, an evolution towards a more balanced development of the different areas of chemistry in Brazil.

Utilização de índices r e R obtidos de programas interlaboratoriais para o controle de precisão de método analítico: Determinação de água por Karl Fischer

Values of repeatability (r) and reproducibility (R) are parameters of an analytical method. They are related to the maximum difference between two results of analysis (permissible range) and can be obtained by interlaboratorial comparisons. They represent great importance for the quality control of the results and decisions about the fitness-for-purpose of the method. Water determination in fuel oil samples were performed by 16 laboratories, using the Karl Fischer reaction, during the period from June 1997 to December 1999. Values of r and R were presented. Discussion is made in terms of the main factors that would be contribution to analytical method variabilities and uncertainties of final results.

The chemistry involved in the steam treatment of lignocellulosic materials

Pretreatment of lignocellulosic materials is essential for bioconversion because of the various physical and chemical barriers that greatly inhibit their susceptibility to bioprocesses such as hydrolysis and fermentation. The aim of this article is to review some of the most important pretreatment methods developed to date to enhance the conversion of lignocellulosics. Steam explosion, which precludes the treatment of biomass with high-pressure steam under optimal conditions, is presented as the pretreatment method of choice and its mode of action on lignocellulosics is discussed. The optimal pretreatment conditions for a given plant biomass are defined as those in which the best substrate for hydrolysis is obtained with the least amount of soluble sugars lost to side reactions such as dehydration. Therefore, pretreatment optimization results from a compromise between two opposite trends because hemicellulose recovery in acid hydrolysates can only be maximized at lower pretreatment severities, whereas the development of substrate accessibility requires more drastic pretreatment conditions in which sugar losses are inevitable. To account for this heterogeneity, the importance of several process-oriented parameters is discussed in detail, such as the pretreatment temperature, residence time into the steam reactor, use of an acid catalyst, susceptibility of the pretreated biomass to bioconversion, and process design.

A reação de metátese de olefinas: reorganização e ciclização de compostos orgânicos

The olefin metathesis reaction allows the exchange of complex alkyl units between two olefins, with the formation of a new olefinic link and a sub-product olefin usually ethylene. This reaction has found extensive application in the last ten years with the development of the Grubbs and Schrock catalysts, in total synthesis of complex organic molecules, as opposed to the very important use in the petrochemical industry with relatively simple molecules. This review intends to trace a historical and mechanistic pathway from industry to academy, before illustrating the more recent advances.

Desenvolvimento e validação de metodologia de análise de misturas biodiesel: diesel utilizando cromatografia gasosa-espectrometria de massas

The aim of this work was to develop and validate a method of analysis of biodiesel:diesel blends using HRGC-MS in SIM mode. The proposed method is applicable to biodiesel from linoleic oils, such as soybean oil. The following results were obtained: linearity over the methyl linoleate concentration range of 250-2500 mg L-1 (R² > 0.999); limits of detection and quantification of 2 and 5 mg L-1, respectively; recovery from 82 to 96% of biodiesel in diesel and repeatability < 2% (RSD). Comparison between two operators showed that it is not necessary the same operator to do the analysis.

Estudo cinético da decomposição térmica do pentaeretritol-tetranitrado (PETN)

The pentaerythritol-tetranitrate (PETN) is a nitroether used in explosives and propellant formulations. Due to its suitable properties, PETN is used in booster manufacture. Knowing the thermal decomposition behavior of an energetic material is very important for storage and manipulation, and the purpose of this work is to study the kinetic parameters of the decomposition of PETN, compare the results with literature data and to study the decomposition activation energy differences between two crystalline forms of PETN (tetragonal and needle) by means of differential scanning calorimetry (DSC). Fourier transform infrared spectroscopy (FT-IR) is used to study the two crystalline forms.

Ressonância: desenvolvimento, utilização e avaliação de um software educacional

Resonance is a useful concept that shows how electrons are shared between two or more atoms and allows a prediction of the chemical reactivity and relative stability of reagents, intermediates, and products. An educational software that enables interactive exploration of the concepts related to resonance and thereby facilitates its understanding was developed. The software was field-tested, and an evaluation questionnaire concerning the software as an educational tool was answered by the students and professors involved in the test. The results led to the conclusion that the developed computer application can be characterized as an auxiliary tool that assists teachers in their lectures and students in their learning process.

Análise espacial e quimiométrica da distribuição de espécies metálicas em solos alagáveis e não alagáveis da Bacia do Médio Rio Negro, Amazônia

This study used chemometric tools and a Geographic Information System (GIS) to determine the influence of organic matter and anthropogenic activity on the distribution of metal species between two major communities of the Middle Negro River Basin-AM. Higher concentrations of metal species were determined in flooded regions. The chemometric analysis showed the affinity of organic matter for potentially toxic metals, indicating its selectivity. GIS spatial analysis has shown that proximity to urban areas is a variable that is likely to influence the pattern of concentration of organic matter, and consequently the distribution of metal species between flooded and non-flooded areas.

Identification of sources of resistance in sorghum to Peronosclerospora sorghi

The main objective of this work was to identify sources of resistance in sorghum (Sorghum bicolor) to Peronosclerospora sorghi, the causal agent of downy mildew, through the evaluation of 42 sorghum genotypes under natural infection in the field. Genotypes were planted in single row plots between two rows of the susceptible line SC283, planted 30 days before, to act as spreader rows, in two separate nurseries. The experimental design was a completely randomized block design with three replications. Sorghum genotypes CMSXS156, CMSXS157, CMSXS243, TxARG-1, 8902, 9902054, 9910032, 9910296, Tx430, QL-3, SC170-6-17, CMSXS762 and BR304 were classified as highly resistant in both nurseries. Among these, SC170-6-17 and 9910296 showed 0% systemic infection. Results indicated the possible occurrence of different pathotypes of P. sorghi in the two nurseries.

Ultrastructural lesions in the myocardium and kidneys of rabbits in experimental acute Amorimia exotropica poisoning

Abstract: Amorimia exotropica is an important plant associated with sudden death in cattle in Southern Brazil. In order to understand the mechanisms by which A. exotropica causes acute lesions in the heart and kidney of intoxicated animals, an experiment was conducted to determine the histopathology and ultrastructure of myocardial and renal lesions of intoxicated rabbits. After receiving 18g/kg of dried plant, six rabbits died suddenly. At necropsy, the liver was swollen and no other macroscopic lesions were observed. Histologically, centrolobular and midzonal hepatocytes were vacuolated. These vacuoles were strong PAS stained positive, suggesting that they corresponded to glycogen accumulations. In some regions of the ventricular septum and ventricles were found vacuoles of different sizes and the kidneys of two rabbits showed vacuolar degeneration on distal convoluted tubules. Ultrastructurally, the myocardium had cardiomyocytes swelling with separation of myofibrils bundles and rupture and disorganization of the sarcomeres. The mitochondria displayed swelling, disorganization, disruption of the mitochondrial cristae, and electron-dense matrix. Some mitochondria exhibited eccentric projections of their membranes with disruption of both outer and inner membranes. The sarcoplasmic reticulum had no alterations, whereas the T-tubule system was occasionally dilated and ruptured. The kidneys had mitochondrial swelling with disorganization and disruption of the mitochondrial cristae. The vacuoles result from the swelling of the endoplasmatic reticulum and usually were located between two basolateral infoldings and mitochondria, occurring preferentially around the nucleus. The myocytes and T system damages induced by A. exotropica result in acute heart failure and death. Furthermore, this mechanism of cardiotoxicity may be common to all plant containing monofluoroacetate.

Response of Grilage-Like Structures by the Mobility Approach

This work presents an application of the Mobility Approach to the analysis of the power flow through grillage-like structures. Such structures are usually found in offshore platforms, supporting large and heavy machines. Different wave kinds (longitudinal, flexural and torsional) were initially considered in the power flow analysis between two beams joined in L. Beams excited by an in-plane point force showed strong coupling between longitudinal-flexural waves, while that for out-of-plane point force excitation, flexural-torsional waves coupling represents the most important mechanism of energy transmission. The response determination of grillages by the mobility approach requires the structure to be separated into simple beam-like structural components. Equations for rotations and displacements at the joints of all beams are written for as mobility functions, and moments and forces acting at the joints. A system of equations relating all such internal forces and moments is obtained. This approach was applied to simple grillages. Response results showed good agreement when compared to those provided by Finite Elements.

Horizontal Slug Flow in a Large-Size Pipeline: Experimentation and Modeling

The knowledge of the slug flow characteristics is very important when designing pipelines and process equipment. When the intermittences typical in slug flow occurs, the fluctuations of the flow variables bring additional concern to the designer. Focusing on this subject the present work discloses the experimental data on slug flow characteristics occurring in a large-size, large-scale facility. The results were compared with data provided by mechanistic slug flow models in order to verify their reliability when modelling actual flow conditions. Experiments were done with natural gas and oil or water as the liquid phase. To compute the frequency and velocity of the slug cell and to calculate the length of the elongated bubble and liquid slug one used two pressure transducers measuring the pressure drop across the pipe diameter at different axial locations. A third pressure transducer measured the pressure drop between two axial location 200 m apart. The experimental data were compared with results of Camargo's1 algorithm (1991, 1993), which uses the basics of Dukler & Hubbard's (1975) slug flow model, and those calculated by the transient two-phase flow simulator OLGA.

Performance evaluation of 3D computer vision techniques

This work presents the implementation and comparison of three different techniques of three-dimensional computer vision as follows: • Stereo vision - correlation between two 2D images • Sensorial fusion - use of different sensors: camera 2D + ultrasound sensor (1D); • Structured light The computer vision techniques herein presented took into consideration the following characteristics: • Computational effort ( elapsed time for obtain the 3D information); • Influence of environmental conditions (noise due to a non uniform lighting, overlighting and shades); • The cost of the infrastructure for each technique; • Analysis of uncertainties, precision and accuracy. The option of using the Matlab software, version 5.1, for algorithm implementation of the three techniques was due to the simplicity of their commands, programming and debugging. Besides, this software is well known and used by the academic community, allowing the results of this work to be obtained and verified. Examples of three-dimensional vision applied to robotic assembling tasks ("pick-and-place") are presented.

Corn cultivar intercropping with arboreal legumes for weed control

Gliricidia (Gliricidia sepium) seedlings are usually beneficial to corn crops when planted between corn rows. The objective of this work was to assess the effects of corn intercropped with gliricidia and "sabiá" (Mimosa caesalpiniifolia), a species native to the Brazilian northeastern region, on weed control and corn green ear and grain yields. The experiment was carried out at Estação Experimental da Universidade Federal Rural do Semi-Árido - UFERSA (Mossoró, State of Rio Grande do Norte, Brazil). The experimental design consisted of randomized complete blocks (multifactorial design) with five replications, arranged in split-plots. The plots consisted of corn cultivars AG1051 and BM 2022; subplot treatments (six) were no-hoeing, twice-hoeing (at 20 and 40 days after sowing) and intercropping with gliricidia and "sabiá", either directly sown or transplanted, simultaneously with corn sowing. The intercropped leguminous plants were spaced 0.40 m from each other, and directly seeded or transplanted (30-day-old seedlings) in between two 1 m-spaced corn rows. Twenty three weed species were identified during the experiment. Gliricidia seedlings were superior to "sabiá" seedlings with regard to plant height and survival rate. The highest corn green ear and grain yields were found for twice-hoed subplots, while the lowest yield was found for no-hoed or intercropped subplots. However, grain yield values in intercropped treatments did not differ from grain yield values in hoed plots. In addition, marketable husked green ear mean weights did not differ between twice-hoed subplots and subplots directly seeded with gliricidia and "sabiá". Such results indicated that corn benefited from the intercropping system, but intercropping with gliricidia and "sabiá" transplanted resulted in lower benefits than with the direct sowing of those species.