722 resultados para manejo orgânico
Resumo:
Sequential extraction is not totally effective to dissolve distinct forms of trace elements. The extractive solution, for example, can dissolve less of the target fraction and more than another not wished fraction. The goal of this work is to compare the extraction of native iron with three sequential extraction methods of the heavy metals, using three soils with different physical chemistry characteristics: a histosol, an oxisol, and a mollisol. The results obtained in this work demonstrate that a smaller relation soil/extractor results in a larger extraction in almost all phases. The use of many stages of the sequential extraction, with the purpose of more association of the metal with different components of the soil, can result, among other things, in modification of the substratum by the action of the reagents used, besides reducing the selectivity of the more specific extractors. Readsorption and redistribution of the heavy metals could have happened with larger intensity in the fraction where hidroxilamine was used with higher temperature. Sequential extraction of iron, without enrichment of soil samples, in the respective fractions in each method, it was important to better understand the behavior of the reagents considered specific to each form of the metal in soil.
Resumo:
Poly (ethylene) glycol (PEG) and bovine serum albumin (BSA), as additive agents, were used to enhance the activity of immobilized microbial lipase in organic solvent. Controlled pore silica (CPS) was selected as matrix and different immobilization procedures were evaluated: directly lipase binding on CPS and simultaneous addition of lipase and additive agent on the same support. The highest coupling yield (59.6%) was attained when the immobilization procedure was performed at lipase loading of 150 U/g support in the presence of PEG-1.500. This immobilized system was used in esterification reactions under repeated batch cycles and the biocatalyst half-life was found to increase 2.7 times when compared with the control.
Resumo:
The preparation and application of organic-inorganic hybrid materials are under fast development and constitute an interesting research topic on account of the versatility and wide range of applications offered by these materials. These properties can be achieved due to the mixture of the components at the molecular level. The present review covers the state of the art, the most useful preparation routes and the potential applications of these materials.
Resumo:
Microbial lipase from Candida rugosa was immobilized by covalent binding on wood cellulignin (Eucaliptus grandis) chemically modified with carbonyldiimidazole. The immobilized system was fully evaluated in aqueous (olive oil hydrolysis) and organic (ester synthesis) media. A comparative study between free and immobilized lipase was carried out in terms of pH, temperature and thermal stability. A higher pH value (8.0) was found optimal for the immobilized lipase. The optimal reaction temperature shifted from 37 °C for the free lipase to 45 °C for the immobilized lipase. The pattern of heat stability indicated that the immobilization process tends to stabilize the enzyme. Kinetics tests at 37 °C following the hydrolysis of olive oil obeyed the Michaelis-Menten rate equation. Values for Km = 924.9 mM and Vmax = 198.3 U/mg were lower than for free lipase, suggesting that the affinity towards the substrate changed and the activity of the immobilized lipase decreased during the course of immobilization. The immobilized derivative was also tested in the ester synthesis from several alcohols and carboxylic acids.
Resumo:
In this work a simple and sensitive procedure to extract organic mercury from water and sediment samples, using methylene chloride in acidic media followed by CVAFS quantification has been developed. The method was evaluated for possible interferents, using different inorganic mercury species and humic acid, no effects being observed. The detection limit for organic mercury was 160 pg and 396 pg for water and sediment samples respectively. The accuracy of the method was evaluated using a certified reference material of methylmercury (BCR-580, estuarine sediment). Recovery tests using methylmercury as surrogate spiked with 1.0 up to 30.0 ng L-1 ranged from 90 up to 109% for water samples, whereas for sediments, recoveries ranged from 57 up to 97%.
Resumo:
Broccoli is a vegetable consumed in many countries and a possible source of folates, which are water-soluble vitamins active during DNA synthesis. The folates found in the samples analyzed were 5-methyltetrahydrofolate and 5-formyltetrahydrofolate. The vitamin content varied between 413.7 and 742.2 µg/100 g for 5-methyltetrahydrofolate and from 4.8 to 12.8 µg/100 g for 5-formyltetrahydrofolate. In organic broccoli the amount of 5-methyltetrahydrofolate was significantly higher than in the same vegetable cultivated by traditional methods, for the commercial samples analyzed. The losses of these folates after cooking in water were of approximately 68%, most of it (53%) found in the cooking water.
Resumo:
This work aimed to assess the photocatalytic degradation of a model odor compound (dimethyl disulfide, DMDS), found in liquid and gaseous wastes of plants for processing poultry byproducts. The effect of pH and temperature on adsorption and photocatalytic degradation was evaluated through factorial experimental designs. The results suggest the presence of an optimum region for adsorption, at 45.0 ºC and pH 4.0. In the photocatalytic runs an optimum for temperature and pH was also observed. At 45 ºC and pH 4.0 the removal of DMDS was 99% after 60 min of irradiation.
Resumo:
In this work synthetic niobia was used to promote the oxidation of methylene blue dye in aqueous medium. The niobia was characterized by N2 adsorption/desorption, XRD and TG measurements. The presence of reactive species on the niobia surface strongly increased the oxidation rate of the methylene blue dye. The reaction mechanism was studied by ESI-MS suggesting that the oxidation of the organic dye involve oxidizing species generated mainly after previous treatment with H2O2. It can be observed that the catalyst is a good material in the activation of gas (atmospheric oxygen) or liquid (hydrogen peroxide) oxidant agent with a total discoloration of the dye solution after only 1 h of reaction.
Resumo:
In this work were prepared composites of iron oxide and carbonaceous materials in two different weight proportions (Carbon/Fe 1/1 and 1/2). The physico-chemical properties of the composites were determined by temperature programmed reduction (TPR), adsorption/dessorption of N2, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and pulse titration H2. The XRD and XPS analysis showed a cubic iron oxide phase, identified as maghemite, formed over the carbon surface. The particle size of maghemite showed to be within 10-30 nm. Carbon/Fe 1/2 was the most active in MB removal kinetics and ESI-MS studies showed that MB removal by both composites leads to oxidized intermediates.
Resumo:
Soil CO2 emissions represent an important component of carbon global cycle. However, information about short-term alterations of CO2 fluxes in soils of tropical regions are scarce. So, the objective of this study was to evaluate such variations in coffee plantations in Latosol (Oxisol). The CO2 emissions were not affected by environmental abiotic factors, such as temperature and soil water evaporation, but they were significantly correlated with the carbon content of microbial biomass (R=0.90, P<0.05). It happens a close relationship between root activity and soil CO2 emission in coffee plantations.
Resumo:
This study aimed to evaluate the chemical elements levels in soil, submitted to different management systems and use by the Energy Dispersive X-Ray Fluorescence Spectrometry - EDXRF. The systems were T1 - agro forestry (SAF), T2 - Native Field (CN), T3 - Native Forest (NM), T4 - Tillage Forest (PF); T5 - conventional tillage system (SPC) and T6 - System tillage (NT). Samples were collected at 0-10 and 10-20 cm, dried and ground for analysis in EDX-720. The soil showed no difference in the average concentrations of chemical elements analyzed in the profiles, but the systems presented different concentrations of metal elements, and T3 had the highest K, Ca and Zn at 0-10 cm and higher contents of K, Ca, Cu, Zn and Mn in the layer of 10-20 cm.
Resumo:
This work aimed at the synthesis and characterization of particles of modified silica containing the organic filter dibenzoylmethane (DBM) by the hydrolytic sol-gel method, with modifications to the Stöber route. The structures of the resulting Xerogels were characterized by diffuse reflectance UV-VIS spectroscopy in the solid state, infrared absorption spectroscopy, Scanning Electron Microscopy (SEM) and 29Si Nuclear Magnetic Resonance (29Si NRM). The results showed favorable formation of hybrid organic-inorganic nanoparticles with efficient absorption/reflectance of radiation in the UV / VIS range, which enables their potential use as sunscreen.
Resumo:
A população de Meloidogyne incognita e sua infetividade foram estudadas em parcelas amostradas a zero, dois e 14 dias após o revolvimento do solo com ou sem irrigação, irrigadas sem revolvimento e testemunha. Na amostragem aos dois dias após a instalação do ensaio, ocorreu maior redução (P<0,01) de juvenis do segundo estádio ( J2) no solo apenas revolvido seguido pelo revolvido e irrigado. A infetividade do inóculo do solo, contudo, foi menor (P<0,01) quando se revolveu e irrigou o solo comparado com aquele apenas revolvido. Aos 14 dias, a menor (P<0,01) população de J2 foi observada no solo revolvido e irrigado, seguido do revolvido, e elevada naquele apenas irrigado e na testemunha. A infetividade do inóculo do solo aos 14 dias continuou mais baixa no solo revolvido e irrigado. Aos 45 dias após a semeadura, a população de J2 continuou mais baixa (P<0,01) onde o solo foi revolvido e irrigado. O número de ovos por feijoeiro (Phaseolus vulgaris) no campo aos 90 dias também foi mais baixo (P<0,01) no solo revolvido e irrigado. Maior (P<0,01) peso das raízes e da parte aérea dos feijoeiros no campo foi observado em plantas crescidas em solo apenas revolvido, e no revolvido e irrigado A produção de feijão no solo revolvido e irrigado posteriormente foi quatro vezes maior que a testemunha, porém todos os tratamentos diferiram-se entre si. A irrigação como prática agrícola para aumentar a eficácia do alqueive no controle de fitonematóides tem sido postulada por alguns pesquisadores, mas nunca provada experimentalmente, o que agora foi realizada.
Resumo:
O cultivo protegido tem sido um importante insumo agrícola que permite aumentos de produção das culturas, onde se esgotaram as tentativas convencionais de se obter incrementos face ao elevado emprego de técnicas modernas de cultivo. Nesse novo ambiente de cultivo, onde as plantas são colocadas sob novo limite de produtividade, visando propiciar condições para expressão do seu máximo potencial genético, o manejo inadequado dos seus fatores aéreos e do solo pode propiciar condições muito favoráveis a determinada doença biótica ou abiótica. Assim, doenças menos problemáticas ou de pouca importância em cultivo convencional, podem tornar-se muito destrutivas em cultivo protegido. Por isso, o manejo de doenças em cultivo protegido é uma tarefa complexa e medidas de controle devem ser integradas num sistema flexível, que seja compatível com o sistema de produção e que seja econômico. Desta forma, estratégias de manejo integrado das doenças em cultivo protegido podem ser agrupadas em medidas que visam a redução do inóculo inicial e aquelas que visam a redução da taxa de progresso da doença.
Resumo:
A flutuação populacional de juvenis do segundo estádio (J2) de M. incognita e sua infectividade foram estudadas por meio de bioteste em solo revolvido com ou sem irrigação, comparadas a condições de solo não revolvido nem irrigado, considerado testemunha, e com apenas irrigado, em casa-de-vegetação por 14 dias. Aos sete dias, a população de J2 no solo foi significativamente reduzida apenas nas parcelas revolvidas. Entretanto, a infectividade do inóculo no solo nesse período, avaliada em bioteste, foi reduzida apenas nas parcelas revolvidas e irrigadas. Aos 14 dias, a população de J2 no solo foi menor nas parcelas revolvidas com ou sem irrigação, porém continuou sendo a mais baixa nas parcelas apenas revolvidas. Contudo, a infectividade do inóculo no solo neste período foi mais baixa nas parcelas revolvidas e irrigadas e mais elevada na testemunha.