Early Changes in Soil Metabolic Diversity and Bacterial Community Structure in Sugarcane under Two Harvest Management Systems

Preharvest burning is widely used in Brazil for sugarcane cropping. However, due to environmental restrictions, harvest without burning is becoming the predominant option. Consequently, changes in the microbial community are expected from crop residue accumulation on the soil surface, as well as alterations in soil metabolic diversity as of the first harvest. Because biological properties respond quickly and can be used to monitor environmental changes, we evaluated soil metabolic diversity and bacterial community structure after the first harvest under sugarcane management without burning compared to management with preharvest burning. Soil samples were collected under three sugarcane varieties (SP813250, SP801842 and RB72454) and two harvest management systems (without and with preharvest burning). Microbial biomass C (MBC), carbon (C) substrate utilization profiles, bacterial community structure (based on profiles of 16S rRNA gene amplicons), and soil chemical properties were determined. MBC was not different among the treatments. C-substrate utilization and metabolic diversity were lower in soil without burning, except for the evenness index of C-substrate utilization. Soil samples under the variety SP801842 showed the greatest changes in substrate utilization and metabolic diversity, but showed no differences in bacterial community structure, regardless of the harvest management system. In conclusion, combined analysis of soil chemical and microbiological data can detect early changes in microbial metabolic capacity and diversity, with lower values in management without burning. However, after the first harvest, there were no changes in the soil bacterial community structure detected by PCR-DGGE under the sugarcane variety SP801842. Therefore, the metabolic profile is a more sensitive indicator of early changes in the soil microbial community caused by the harvest management system.

SPATIAL UNCERTAINTY OF NUTRIENT LOSS BY EROSION IN SUGARCANE HARVESTING SCENARIOS

The assessment of spatial uncertainty in the prediction of nutrient losses by erosion associated with landscape models is an important tool for soil conservation planning. The purpose of this study was to evaluate the spatial and local uncertainty in predicting depletion rates of soil nutrients (P, K, Ca, and Mg) by soil erosion from green and burnt sugarcane harvesting scenarios, using sequential Gaussian simulation (SGS). A regular grid with equidistant intervals of 50 m (626 points) was established in the 200-ha study area, in Tabapuã, São Paulo, Brazil. The rate of soil depletion (SD) was calculated from the relation between the nutrient concentration in the sediments and the chemical properties in the original soil for all grid points. The data were subjected to descriptive statistical and geostatistical analysis. The mean SD rate for all nutrients was higher in the slash-and-burn than the green cane harvest scenario (Student’s t-test, p<0.05). In both scenarios, nutrient loss followed the order: Ca>Mg>K>P. The SD rate was highest in areas with greater slope. Lower uncertainties were associated to the areas with higher SD and steeper slopes. Spatial uncertainties were highest for areas of transition between concave and convex landforms.

Soil Compaction Curve of an Oxisol Under Sugarcane Planted After In-row Deep Tillage

ABSTRACT Soil tillage that maintains the productivity of sugarcane plantations, providing an area for the root development and without traffic on crop rows, has given rise to new technologies in rural areas. The purpose of this study was to evaluate the soil physical properties in two sugarcane plantations, one of which was prepared with deep tilling and the other with conventional tillage. The experiment was conducted in Lençóis Paulista, São Paulo State. Soil penetration resistance and relative density were analyzed. The cone index was lower in deep-tilled soil without traffic in all layers, than in deep-tilled soil with traffic and in conventional tillage. In both tillage treatments, the relative density values were acceptable in the 0.00-0.15 m soil layer, but considered detrimental for sugarcane development in the 0.15-0.30 and 0.30-0.45 m layers.

Least Limiting Water Range and Load Bearing Capacity of Soil under Types of Tractor-Trailers for Mechanical Harvesting of Green Sugarcane

ABSTRACT The expansion of the sugarcane industry in Brazil has intensified the mechanization of agriculture and caused effects on the soil physical quality. The purpose of this study was to evaluate the limiting water range and soil bearing capacity of a Latossolo Vermelho distroférrico típico (Rhodic Hapludox) under the influence of different tractor-trailers used in mechanical sugarcane harvesting. The experiment was arranged in a randomized block design with five replications. The treatments consisted of green sugarcane harvesting with: harvester without trailer (T1); harvester with two trailers with a capacity of 10 Mg each (T2); harvester with trailer with a capacity of 20 Mg (T3) and harvester and truck with trailer with a capacity of 20 Mg (10 Mg per compartment) (T4). The least limiting water range and soil bearing capacity were evaluated. The transport equipment to remove the harvested sugarcane from the field (trailer) at harvest decreased the least limiting water range, reducing the structural soil quality. The truck trailer caused the greatest impact on the soil physical properties studied. The soil load bearing capacity was unaffected by the treatments, since the pressure of the harvester (T1) exceeded the pre-consolidation pressure of the soil.

Leaching of nitrogen, potassium, calcium and magnesium in a sandy soil cultivated with sugarcane

A lysimeter experiment was carried out with sugarcane aiming to evaluate the leaching of nitrogen derived from either urea (15N) or the soil/sugarcane crop residues. The leaching of K+, Ca2+, and Mg2+ was also evaluated. The experiment was a factorial 2x4. The influencing factors were: firstly, the differential addition of two kinds of sugarcane remains to the soil, simulating conditions of cane- plantation renewal after the cane crop harvest, with and without previous straw removal by burning; secondly, four doses of N: 0, 30, 60, and 90 kg ha-1. During the experimental period the total volume of water received by the sugarcane-soil system was 2,015 mm, with 1,255 mm as precipitation and 760 mm as irrigation. The loss of N by leaching from the fertilizer (15N) was not detected. In the first three weeks the largest losses of N by leaching occurred, originating from the soil/sugarcane remains-N. The mean of leached N during the experimental period of 11 months was of 4.5 kg ha-1. The mean losses of K+, Ca2+, and Mg2+ were of 13, 320 and 80 kg ha-1, respectively.

Norms establishment of the Diagnosis and Recommendation Integrated System (DRIS) for nutritional diagnosis of sugarcane

The objectives of this study were to establish DRIS norms for sugarcane crop, to compare mean yield, foliar nutrient contents and variance of nutrient ratios of low- and high-yielding groups and to compare mean values of nutrient ratios selected as the DRIS norms of low- and high-yielding groups. Leaf samples (analyzed for N, P, K, Ca, Mg, S, Cu, Mn and Zn contents) and respective yields were collected in 126 commercial sugarcane fields in Rio de Janeiro State, Brazil and used to establish DRIS norms for sugarcane. Nearly all nutrient ratios selected as DRIS norms (77.8%) showed statistical differences between mean values of the low- and high-yielding groups. These different nutritional balances between the low- and high-yielding groups indicate that the DRIS norms developed in this paper are reliable. The DRIS norms for micronutrients with high S²l /S²h ratio and low coefficient of variation found can provide more security to evaluate the micronutrient status of sugarcane.

DRIS norms validation for sugarcane crop

The objectives of this study were to evaluate the relationship between the diagnosis and recommendation integrated system (DRIS) indices and foliar nutrient concentrations, to establish optimum foliar nutrient concentrations with DRIS and to validate the DRIS norms for sugarcane crop. Foliar nutrient concentrations from 126 sugarcane commercial fields were analyzed during the 1996/97 season, to calculate DRIS indices. Regression analysis was used to fit a model relating DRIS indices to nutrient concentrations. Experiments were carried out during the 1997/98 season, whose treatments consisted of the addition of the most limiting nutrients according to DRIS. A new diagnosis was performed. At the end of 1997/98 season, the yields of each plot were collected. Analysis of variance and Duncan test (5%) were used for the evaluation of the collected data. There was a positive and significant relationship between sugarcane foliar nutrient concentrations and DRIS indices. The optimum foliar nutrient concentrations for sugarcane are: 13.4 g ha-1 for N, 1.91 g ha-1 for P, 12.2 g ha-1 for K, 2.99 g ha-1 for Ca, 2.15 g ha-1 for Mg, 1.61 g ha-1 for S, 4.48 mg ha-1 for Cu, 67.8 mg ha-1 for Mnand 11.7 mg ha-1 for Zn. DRIS norms evaluated are useful to correct nutritional imbalances and to increase sugarcane yield.

Urea and sugarcane straw nitrogen balance in a soil-sugarcane crop system

The objectives of this study were to evaluate nitrogen utilization by sugarcane ratoon from two sources, applied urea and sugarcane straw covering soil surface (trash blanket), besides the recovery of N from both sources in the soil-plant system. The following treatments were established in a randomized block design with four replicates: T1, vinasse-urea (100 kg ha-1 of urea-N) mixture applied on the total area of the soil covered with cane trash labeled with 15N; T2, vinasse-urea mixture (urea labeled with 15N; 100 kg ha-1 of urea-N) applied on the total area of the soil covered with non-labeled sugarcane trash; and T3, urea-15N (100 kg ha-1 of urea-N) applied in furrows at both sides of cane rows, with previous surface application of vinasse, onto soil without trash covering. The vinasse was applied at a rate of 100 m³ ha-1 in all treatments. The experiment was carried out on a Yellow Red Podzolic soil (Paleudalf), from October 1997 to August 1998, in Piracicaba, SP, Brazil. The nitrogen use efficiency of urea by the sugarcane ratoon was 21%, while that of the sugarcane straw was 9%. The main contributions of N from sugarcane trash, during one cycle, are the preservation and increase of the organic N in soil. The tendency for a lower accumulation of urea-N in the sugarcane plant, in the soil surface covered with sugarcane residue, was compensated by the assimilation of N from trash mineralization. Nitrogen derived from cane trash was more available to plants in the second half of the ratoon cycle

Yield and performance of sugarcane in on-farm interface with rubber in Brazil

Agroforestry systems are indicated as an alternative for sugarcane (Saccharum officinarum) cultivation in Piracicaba, SP, Brazil, however there are not many field experiments on plant performance under these conditions in the world. The objective of this work was to assess crop yield and partitioning in a sugarcane-rubber (Hevea brasiliensis) interface in on-farm conditions. The availability of irradiance for the crop along the interface was simulated and its effe ct over sugarcane dry matter production was tested. Crop yield was negatively affected by distance of the trees, but development and sucrose were not affected. Above ground dry matter increased from 16.6 to 51.5 t ha-1 from trees. Partitioning did not have a defined standard, as harvest index increased from 0.85 to 0.93, but specific leaf area was not significant along the transect, ranging from 13.48 to 15.73 m² kg-1. Light is the main factor of competition between the trees and the crop, but the relative importance of below ground interactions increases closer to the trees. Feasibility of the system depends on maturity of the trees and management strategies.

Selection via simulated individual BLUP based on family genotypic effects in sugarcane

The objective of this work was to propose a new selection strategy for the initial stages of sugarcane improvement, based on the methodology 'simulated individual BLUP (BLUPIS)', which promotes a dynamic allocation of individuals selected in each full-sib family, using BLUP as a base for both the genotypic effects of the referred families and plot effects. The method proposed applies to single full-sib families or those obtained from unbalanced or balanced diallel crosses, half-sib families and self-pollinated families. BLUPIS indicates the number of individuals to be selected within each family, the total number of clones to be advanced, and the number of families to contribute with selected individuals. Correlation between BLUPIS and true BLUP was 0.96, by method validation. Additionally, BLUPIS allows the identification of which replication contains the best individuals of each family.

Performance of Holstein heifers fed sugarcane silages treated with urea, sodium benzoate or Lactobacillus buchneri

The objective of this work was to evaluate the performance of heifers fed sugarcane silages produced with and without additives. Thirty-two Holstein heifers were randomly assigned, in a block design, to evaluate rations (46% silage; 54% concentrate; 12% crude protein) containing silages treated with (fresh basis) urea (0.5%), sodium benzoate (0.1%) or Lactobacillus buchneri (3.64x10(5) cfu g-1 ). Inoculation with L. buchneri improved daily gain (1.24 vs. 0.94 kg day-1 ), and the addition of benzoate resulted in better feed conversion (7.6 vs. 9.4 kg of dry matter per kg of live weight), in relation to the untreated silage (control). Treatments did not affect dry matter intake (mean of 2.19% of live weight). Rations containing silages treated with benzoate or L. buchneri showed lower cost per kg of weight gain. Treatment with urea did not improve animal performance, but the cost per kg of weight gain was lower than that of the control ration.

Sugarcane crop efficiency in two growing seasons in São Paulo State, Brazil

A conceptual framework for crop production efficiency was derived using thermodynamic efficiency concept, in order to generate a tool for performance evaluation of agricultural systems and to quantify the interference of determining factors on this performance. In Thermodynamics, efficiency is the ratio between the output and input of energy. To establish this relationship in agricultural systems, it was assumed that the input energy is represented by the attainable crop yield, as predicted through simulation models based on environmental variables. The method of FAO's agroecological zones was applied to the assessment of the attainable sugarcane yield, while Instituto Brasileiro de Geografia e Estatística (IBGE) data were used as observed yield. Sugarcane efficiency production in São Paulo state was evaluated in two growing seasons, and its correlation with some physical factors that regulate production was calculated. A strong relationship was identified between crop production efficiency and soil aptitude. This allowed inferring the effect of agribusiness factors on crop production efficiency. The relationships between production efficiency and climatic variables were also quantified and indicated that solar radiation, annual rainfall, water deficiency, and maximum air temperature are the main factors affecting the sugarcane production efficiency.

Sample size for full-sib family evaluation in sugarcane

The objective of this study was to determine the minimum number of plants per plot that must be sampled in experiments with sugarcane (Saccharum officinarum) full-sib families in order to provide an effective estimation of genetic and phenotypic parameters of yield-related traits. The data were collected in a randomized complete block design with 18 sugarcane full-sib families and 6 replicates, with 20 plants per plot. The sample size was determined using resampling techniques with replacement, followed by an estimation of genetic and phenotypic parameters. Sample-size estimates varied according to the evaluated parameter and trait. The resampling method permits an efficient comparison of the sample-size effects on the estimation of genetic and phenotypic parameters. A sample of 16 plants per plot, or 96 individuals per family, was sufficient to obtain good estimates for all traits considered of all the characters evaluated. However, for Brix, if sample separation by trait were possible, ten plants per plot would give an efficient estimate for most of the characters evaluated.

Leaf development and growth of selected sugarcane clones in a subtropical environment

The objective of this work was to compare phyllochron and leaf area on individual stalks of selected sugarcane (Saccharum officinarum) clones grown in a subtropical environment. A two-year field experiment was carried out in Santa Maria, RS, Brazil, during the 2007/2008 and 2008/2009 growing seasons. Three sugarcane clones were used: IAC 822045 (early), SP 711406 (median) and CB 4176 (late), in a complete randomized block design, with four replications. Expanded leaf and total leaf (tips) number were determined, and expanded leaf area was measured. The phyllochron (ºC day leaf-1) based on expanded and tip leaf number was estimated, using 10ºC as base temperature. Allometric relationships between individual area and number of expanded leaves were fitted. Phyllochron was analysed as a four-factor experiment: clone, growing season, phyllochron phase, and phyllochron type. The early clone had the greatest potential for growing in a subtropical climate because of higher leaf output and leaf area.

Spittlebug impacts on sugarcane quality and ethanol production

The objective of this work was to evaluate the impacts of spittlebug (Mahanarva fimbriolata) attack on sugarcane quality and ethanol production. Technological and microbiological parameters of juice and fermentation process were evaluated in ten fermentation cycles and two harvest seasons. Treatments consisted of different spittlebug stalk damage levels: control, with 100% of apparently healthy stalks; medium, with 15% of damaged or dry stalks (DDS); high, with 30% of DDS; and very high, with 60% of DDS. Spittlebug attack caused significant losses in cane quality, reducing total soluble solids, sucrose content, total reducing sugars, and pH, and increasing total phenolic compounds, and total and volatile juice acidity. The fermentation process was also significantly affected, resulting in lower ethanol content in wine. There was an increase in acetaldehyde concentration in the distillate. The spittlebug attack caused negative impacts on sugarcane quality and fermentation process, and these impacts are stronger in late season harvests.