Florística e estrutura horizontal da vegetação arbórea de uma ravina em um fragmento florestal no município de Viçosa, MG

Este estudo foi desenvolvido em um trecho de um fragmento de Floresta Estacional Semidecídua Montana, no Sítio Bom Sucesso, em Viçosa, MG. O objetivo deste trabalho foi conhecer a composição florística e a estrutura fitossociológica do componente arbóreo. Foram instalados 10 transectos de 50 x 10 m, subdivididos em cinco parcelas de 10 x 10 m cada um, totalizando 50 parcelas em 5.000 m². Foram incluídos na amostragem todos os indivíduos arbóreos que apresentavam, no mínimo, 15 cm de circunferência do tronco, a 130 cm do solo. Foram identificadas 151 espécies pertencentes a 108 gêneros de 45 famílias botânicas e amostrados, em 0,5 ha, 820 indivíduos arbóreos vivos e 32 mortos em pé, o que significou uma densidade total estimada de 1.704 indivíduos/ha. A área basal/ha foi de 38,450 m² e a altura média, de 8,43 m. Euterpe edulis foi o destaque da estrutura da vegetação estudada, com 314 indivíduos amostrados, resultando numa densidade relativa de 37,38%, freqüência absoluta de 90%, freqüência relativa de 8,91%, e dominância relativa de 18,79%. O índice de diversidade de Shannon foi de 3,52 e a eqüabilidade, igual a 0,696. Os resultados da composição florística e da estrutura fitossociológica indicaram alta riqueza e diversidade média, sendo a maior parte das espécies representada por poucos indivíduos.

Estrutura horizontal e vertical do componente arbóreo em fase de regeneração natural na mata Santa Luzia, no município de Catende-PE

O estudo foi desenvolvido no fragmento denominado Mata Santa Luzia, situado no Município de Catende, PE, nas coordenadas 8º72'49" S e 35º72'47" W, altitude de 239 m, com os objetivos de avaliar a regeneração natural total de espécies arbóreas no fragmento florestal e verificar a diversidade e estrutura das espécies nessa área. Para a estimativa da regeneração natural das espécies arbóreas no fragmento, foram locadas de forma sistemática 15 subparcelas permanentes de 25 m² (5 x 5 m), equidistantes em 50 m. O nível de inclusão adotado foi de CAP < 15 cm e as medições de altura (h), divididas em três classes, em que a classe 1 contemplou indivíduos com 1,0 < h < 2,0 m, a classe 2 com indivíduos 2,0 < h < 3,0 m e a classe 3 com indivíduos com h > 3,0 m. No fragmento foram amostrados 107 indivíduos vivos, pertencentes a 25 famílias botânicas e 36 táxons. Dessas, 33 foram identificadas em nível de espécie, duas em nível de gênero e uma se apresentou como indeterminada. As cinco espécies com maiores valores para regeneração natural total (RNT) foram assim distribuídas: Rheedia gardneriana Planch. & Triana (9,9%), Cupania racemosa (Vell.) Radlk (7,7%), Brosimum discolor Schott (7,4%), Vismia guianensis (Aubl.) Pers. (6,1%) e Protium heptaphyllum (Aubl.) Marchand (5,9%). Provavelmente, essas espécies no futuro serão as principais responsáveis pela manutenção da estrutura e fisionomia da floresta.

Seleção de sementes de milho durante a simulação da semeadura com disco perfurado horizontal

Teve-se o objetivo de verificar a possível seleção de sementes de milho - arredondadas e achatadas - no processo de semeadura com disco perfurado horizontal, bem como as conseqüências na distribuição longitudinal. Os registros dos dados deram-se pela avaliação visual de duas pessoas, com contador manual, no final da esteira carpetada em movimento de 1,54 m s-1, com 4,60 m de perspectiva para avaliação. Assim, um sensor registrava o número de orifícios do disco horizontal que devia passar pelo tubo condutor, e os espaçamentos falhos e múltiplos eram computados por pessoas diferentes. Os espaçamentos aceitáveis foram obtidos pela subtração dos espaçamentos falhos e múltiplos do total contabilizado. A medição do comprimento e espessura das sementes foi realizada com auxílio de paquímetro. Não houve alterações significativas nas variáveis estudadas, até a passagem de 55 mil orifícios do disco horizontal pelo tubo condutor; portanto, não houve seleção de sementes de milho durante a simulação do processo de semeadura.

Efficiency of pneumatic and horizontal perforated disk meter mechanism in corn no-tillage seeders in soil with different mobilization reports

This work objectified to evaluate the efficiency of two meter mechanism of corn seeds when submitted to different forward speed and soil management system during the non-tillage seeding. It was used a factorial design in randomized blocks. The factors whose effects were examined were related to the seeders with pneumatic and horizontal disk meter mechanisms for the distribution of the seeds, to the set tractor-seeder forward speeds (4.4; 8.0 and 9.8 km h-1), and to the soil management system considering the corn no-tillage seeding over minimum tillage with chisel plow and the no-tillage system for the seeding of oat culture (Avena strigosa Schreb). It was verified that the forward speed didn't influence the initial and final stands of plants but it interfered in the regularity of longitudinal distribution of plants. The smallest speed provided the largest percentile of normal spacing between plants. The pneumatic meter mechanism presented better performance than the horizontal disk perforated in the longitudinal distribution of plants. About corn productivity aspect it's indifferent the recommendation of use for pneumatic and perforated horizontal disk meter mechanism of seeds.

Partida de um reator anaeróbio horizontal para tratamento de efluentes do processamento dos frutos do cafeeiro

O presente estudo teve o objetivo de avaliar a partida e a adaptação de um reator anaeróbio horizontal de leito fixo (RAHLF) no tratamento de águas residuárias do processamento primário dos frutos do cafeeiro (ARC). O reator foi construído com tubos de PVC de 0,2 m de diâmetro e 3,2 m de comprimento. O sistema foi preenchido com cubos de espuma de poliuretano para imobilização de biomassa ativa. O reator apresentou volume total de 0,1 m³ e volume útil equivalente a 0,04 m³. Em média, houve remoção de 49% da matéria orgânica, com o reator trabalhando sob carga orgânica volumétrica média de 2,66 kg m-3 d-1, medida como DQO. A suplementação de alcalinidade, somada à inoculação prévia de biomassa, proporcionou partida estável do RAHLF, confirmada pelo consumo de ácidos voláteis e adaptação da microbiota ao resíduo. O sistema apresentou resistência às variações de vazão e de carga orgânica observadas, e os teores de fenol e potássio monitorados não causaram inibição da atividade biológica no RAHLF. O maior controle sobre as variações de carga é fator importante na continuidade dos estudos.

Start-up of horizontal anaerobic reactors with sludge blanket and fixed bed for wastewater treatment from coffee processing by wet method

In this study it was evaluated the start-up procedures of anaerobic treatment system with three horizontal anaerobic reactors (R1, R2 and R3), installed in series, with volume of 1.2 L each. R1 had sludge blanket, and R2 and R3 had half supporter of bamboo and coconut fiber, respectively. As an affluent, it was synthesized wastewater from mechanical pulping of the coffee fruit by wet method, with a mean value of total chemical oxygen demand (CODtotal) of 16,003 mg L-1. The hydraulic retention time (HRT) in each reactor was 30 h. The volumetric organic loading (VOL) applied in R1 varied from 8.9 to 25.0 g of CODtotal (L d)-1. The mean removal efficiencies of CODtotal varied from 43 to 97% in the treatment system (R1+R2+R3), stabilizing above 80% after 30 days of operation. The mean content of methane in the biogas were of 70 to 76%, the mean volumetric production was 1.7 L CH4 (L reactor d)-1 in the system, and the higher conversions were around at 0.20 L CH4 (g CODremoved)-1 in R1 and R2. The mean values of pH in the effluents ranged from 6.8 to 8.3 and the mean values of total volatile acids remained below 200 mg L-1 in the effluent of R3. The concentrations of total phenols of the affluent ranged from 45 to 278 mg L-1, and the mean removal efficiency was of 52%. The start-up of the anaerobic treatment system occurred after 30 days of operation as a result of inoculation with anaerobic sludge with active microbiota.

Longitudinal distribution of bean seeds in horizontal plate meter operating with one or two seed outlets

This study aimed to evaluate the effect of horizontal plate meter with oblong holes operating with one or two seed outlets at different speeds over the accuracy of longitudinal distribution of common bean seeds (Phaseolus vulgaris L.). The experiment was performed in laboratory using the meter with one and two seed outlet points in relation to ten tangential disk plate speeds (0.03 to 0.30 m s-1). It was used a complete randomized design with four replications, summing up 80 experimental treatments. Tangential speed quantitative factor was estimated through a 2nd order polynomial regression. There was no significant difference in the behavior of the seed meter operating with one or two outlets in the metering of bean seeds in all tested speeds, with percentage of single seeds spacing over 60% in tangential speeds below of 0.24 m s-1.

Horizontal pressures in cylindrical metal silos and comparison with different international standards

The focus of this research was to evaluate the horizontal pressures on a cylindrical metal silo of corrugated walls and flat bottom with 1.82m diameter and 5.4m high, and to compare the values with those obtained theoretically by the ISO 11697, EP 433 and AS 3774 standards. The silo was symmetrically filled and constant speed with wheat cv. soft red for two different height/diameter ratios (H/D) and was unloaded through three orifices with a diameter of 71.6mm, one concentric and two eccentrics. Horizontal pressures were measured on the walls of the silo at three positions using hydraulic type pressure cells. The results showed that shortly after the start of the unloading, there was a mass flow above the quota of H/D = 1.2, whereas below this quota funnel flow occurred. It can be said that the EP 433 standard was more appropriate to predict horizontal pressures in silos in H/D ratio = 1.0, with eccentric unloading. For the H/D ratio = 1.5, AS 3774 standard was the one that produced values closer to the experimental.

Influence of distance, geometry and number of control stations on quality of local geodetic networks for the purpose of georeferencing of rural properties

The implementation of local geodetic networks for georeferencing of rural properties has become a requirement after publication of the Georeferencing Technical Standard by INCRA. According to this standard, the maximum distance of baselines to GNSS L1 receivers is of 20 km. Besides the length of the baseline, the geometry and the number of geodetic control stations are other factors to be considered in the implementation of geodetic networks. Thus, this research aimed to examine the influence of baseline lengths higher than the regulated limit of 20 km, the geometry and the number of control stations on quality of local geodetic networks for georeferencing, and also to demonstrate the importance of using specific tests to evaluate the solution of ambiguities and on the quality of the adjustment. The results indicated that the increasing number of control stations has improved the quality of the network, the geometry has not influenced on the quality and the baseline length has influenced on the quality; however, lengths higher than 20 km has not interrupted the implementation, with GPS L1 receiver, of the local geodetic network for the purpose of georeferencing. Also, the use of different statistical tests, both for the evaluation of the resolution of ambiguities and for the adjustment, have enabled greater clearness in analyzing the results, which allow that unsuitable observations may be eliminated.

Cassava starch extraction effluent treatment in a one phase tubular horizontal pilot reactor with support medium

The cassava starch industries generate a large volume of wastewater effluent that, stabilized in ponds, wastes its biogas energy and pollutes the atmosphere. To contribute with the reversion of this reality, this manipueira treatment research was developed in one phase anaerobic horizontal pilot reactor with support medium in bamboo pieces. The reactor was excavated into the ground and sealed with geomembrane in HDPE, having a volume equal to 33.6 m³ and continuous feeding by gravity. The stability indicators were pH, volatile acidity/total alkalinity ratio and biogas production. The statistical analyses were performed by a completely randomized design, with answers submitted to multivariate analysis. The organical loads in COD were 0.556; 0.670; 0.678 and 0.770 g L-1 and in volatile solids (VS) of 0.659; 0.608; 0.570 and 0.761 g L-1 for the hydraulic retention times (HRT) of 13.0; 11.5; 10.0 and 7.0 days, respectively. The reductions in COD were 88; 80; 88 and 67% and for VS of 76; 77; 65 and 61%. The biogas productions relatively to the consumed COD were 0.368; 0.795; 0.891 and 0.907 Lg-1, for the consumed VS of 0.524; 0.930; 1.757 and 0.952 Lg-1 and volumetric of 0.131; 0.330; 0.430 and 0.374 L L-1 d-1. The reactor remained stable and the bamboo pieces, in visual examination at the end of the experiment, showed to be in good physical conditions.

Application of artificial neural networks as an alternative to volumetric water balance in drip irrigation management in watermelon crop

Precision irrigation seeks to establish strategies which achieve an efficient ratio between the volume of water used (reduction in input) and the productivity obtained (increase in production). There are several studies in the literature on strategies for achieving this efficiency, such as those dealing with the method of volumetric water balance (VWB). However, it is also of great practical and economic interest to set up versatile implementations of irrigation strategies that: (i) maintain the performance obtained with other implementations, (ii) rely on few computational resources, (iii) adapt well to field conditions, and (iv) allow easy modification of the irrigation strategy. In this study, such characteristics are achieved when using an Artificial Neural Network (ANN) to determine the period of irrigation for a watermelon crop in the Irrigation Perimeter of the Lower Acaraú, in the state of Ceará, Brazil. The Volumetric Water Balance was taken as the standard for comparing the management carried out with the proposed implementation of ANN. The statistical analysis demonstrates the effectiveness of the proposed management, which is able to replace VWB as a strategy in automation.

Uso de traçador salino para avaliação da colmatação e das condições hidrodinâmicas em sistemas alagados construídos de escoamento horizontal subsuperficial

RESUMO A colmatação é um fenômeno intrínseco aos sistemas alagados construídos (SACs) utilizados no tratamento de esgotos, sendo decorrente dos mecanismos de remoção de poluentes. Dentre os métodos disponíveis para a avaliação da colmatação, destaca-se o uso de traçadores para a obtenção das condições hidrodinâmicas dos SACs. No entanto, não há um traçador ideal; os salinos, por exemplo, são passíveis de absorção, mecanismo influenciado pelo estádio no qual a planta se apresenta. Assim, objetivou-se, com a realização do trabalho, avaliar a utilização do NaCl para caracterização do grau de colmatação e das condições hidrodinâmicas de SACs de escoamento horizontal subsuperficial, plantado e não plantado, verificar a confiabilidade do uso desse traçador em testes executados durante o estádio de crescimento (após o corte da parte aérea) e o florescimento da taboa (Typha latifolia), além da suscetibilidade de causar danos às plantas. Os resultados indicaram que o NaCl pode ser utilizado para estudos de comparação do grau de colmatação de SACs, inclusive não apresentando danos à taboa. Verificou-se que, após sete anos de operação, a unidade plantada encontra-se mais colmatada e com regime de escoamento mais turbulento. Também foi possível inferir que o corte das plantas propiciou aumento na dispersão no sistema.

Avaliação do Comprimento do Colo Uterino nas Posições Ortostática e Decúbito Horizontal nas Gestações Gemelares

Objetivo: avaliação ultra-sonográfica e comparação da medida do comprimento do colo uterino nas gestações gemelares com as pacientes nas posições de decúbito dorsal horizontal (DDH) e ortostática. Métodos: 50 gestações gemelares foram submetidas a avaliações ultra-sonográficas para medida do comprimento do colo uterino no período de maio de 1999 a dezembro de 2000. Os exames foram realizados pela via transvaginal com periodicidade de 4 semanas totalizando 136 avaliações. A cérvice uterina foi avaliada, segundo técnica normatizada, com a paciente nas posições de decúbito dorsal horizontal e ortostática. Resultados: as medidas do colo uterino nas posições DDH e ortostática na primeira avaliação apresentaram correlação inversa com a idade gestacional (DDH: r=-0,60; p<0,001; ortostático: r=-0,46; p=0,008). A média da medida do colo uterino em DDH foi de 35,2 mm (DP=9,9mm), e 33,4 mm (DP=9,5mm) na posição ortostática (p=0,06). Quando a diferença entre as medidas obtidas nas posiões ortostática e DDH era expressa como percentual da medida na posição DDH, não houve correlação significativa com a idade gestacional (p=0,07) e a média das diferenças percentuais foi de -2,9% (p=0,3). Comparando-se todas as avaliações, houve correlação significativa entre as medidas do colo nas posições DDH e ortostática (r=0,79; p<0,001). A média da medida do colo uterino em DDH foi de 33,5 mm (DP=10,8 mm) e 31,8 mm (DP=9,6mm) na posição ortostática (p=0,003). A diferença percentual não apresentou correlação significativa com a idade gestacional da avaliação (p=0,10) e a média das diferenças percentuais foi de -3,0% (p=0,10). Conclusão: as medidas do comprimento do colo uterino variam inversamente com a idade gestacional. Apesar de haver diferenças significativas entre as medidas absolutas em DDH e ortostática, quando essa diferença é expressa como percentual da medida do colo em decúbito, ela não foi significativa. Portanto, a avaliação cervical nas posições de decúbito e ortostática fornecem informações semelhantes.

Field evaluation of safety during gestation and horizontal spread of a recombinant differential bovine herpesvirus 1 (BoHV-1) vaccine

Bovine herpesvirus type 1 (BoHV-1) is recognized as a major cause of respiratory, reproductive disease and abortion in cattle. Vaccination is widely applied to minimize losses induced by BoHV-1 infections; however, vaccination of dams during pregnancy with modified live virus (MLV) vaccines has been occasionally associated to abortions. We have previously reported the development of a BoHV-1 recombinant virus, constructed with basis on a Brazilian BoHV-1 (Franco et al. 2002a) from which the gene coding for glycoprotein E (gE) was deleted (gE-) by genetic manipulation. Such recombinant has been previously evaluated in its potential as a differential vaccine (gE- vaccine) that allows differentiation between vaccinated and infected animals. Here, in the first part of the present study, the safety of the gE- vaccine during pregnancy was evaluated by the intramuscular inoculation of 10(7.4) tissue culture 50 % infective doses (TCID50) of the virus into 22 pregnant dams (14 BoHV-1 seronegative; 8 seropositive), at different stages of gestation. Other 15 pregnant dams were kept as non-vaccinated controls. No abortions, stillbirths or fetal abnormalities were seen after vaccination. Seroconversion was observed in both groups of previously seronegative vaccinated animals. In the second part of the study, the potential of the gE- vaccine virus to spread among beef cattle under field conditions was examined. Four heifers were inoculated intranasally with a larger amount (10(7,6) TCID50) of the gE- vaccine (to increase chances of transmission) and mixed with other sixteen animals at the same age and body condition, in the same grazing area, at a population density equal to the average cattle farming density within the region (one cattle head per 10,000 m²), for 180 days. All animals were monitored daily for clinical signs. Serum samples were collected on days 0, 30, 60 and 180 post-vaccination. Seroconversion was observed only in vaccinated heifers. These results indicate that, under the conditions of the present study, the gE- vaccine virus did not cause any noticeable harmful effect on pregnant dams and on its offspring and did not spread horizontally among cattle.

Evaluation of follicular lymphoid depletion in the Bursa of Fabricius: an alternative methodology using digital image analysis and artificial neural networks

Fifty Bursa of Fabricius (BF) were examined by conventional optical microscopy and digital images were acquired and processed using Matlab® 6.5 software. The Artificial Neuronal Network (ANN) was generated using Neuroshell® Classifier software and the optical and digital data were compared. The ANN was able to make a comparable classification of digital and optical scores. The use of ANN was able to classify correctly the majority of the follicles, reaching sensibility and specificity of 89% and 96%, respectively. When the follicles were scored and grouped in a binary fashion the sensibility increased to 90% and obtained the maximum value for the specificity of 92%. These results demonstrate that the use of digital image analysis and ANN is a useful tool for the pathological classification of the BF lymphoid depletion. In addition it provides objective results that allow measuring the dimension of the error in the diagnosis and classification therefore making comparison between databases feasible.