Reparo intraperitoneal de defeitos da parede ventral do abdome com telas de poliéster com colágeno e polipropileno com ácido poliglicólico

OBJETIVO: Avaliar a incorporação de telas de poliéster revestido em uma de suas faces por colágeno (Parietex, Covidien) e polipropileno recoberto por ácido poliglicólico (Optilene Mesh Elastic e Safil, BBD Aesculap) no reparo de defeitos da parede ventral de coelhos avaliando a cicatrização no aspecto macroscópico, o depósito de colágeno e a imunomarcação tecidual pelos anticorpos MMP-1, MMP-8 e MMP-13. MÉTODOS: Utilizaram-se 16 coelhos, divididos em dois grupos de oito animais, avaliados após eutanásia após 30 e 60 dias de pós-operatório. Os animais foram submetidos à realização de dois defeitos simétricos na parede ventral do abdome, à direita e esquerda da linha alba, que compreendendo todos os folhetos musculares e o peritônio. O reparo dos defeitos foi realizado mediante implante intraperitoneal de dois modelos diferentes de telas. Utilizou-se a tela de poliéster revestido com camada protetora de colágeno (grupo controle) e a tela de polipropilene revestido com malha de ácido poliglicólico (manufaturacao própria, grupo de experimentacao). A avaliacao constou de aspectos clínicos, achados macroscópicos, análise dos colágenos tipos I/III e avaliação imunoistoquímica de metaloproteinases. RESULTADOS: Os resultados da avaliacao clínica e os parâmetros macroscópicos foram semelhantes entre os grupos. 50% dos animais do grupo Parietex tiveram ausência de aderencias intraperitoneais a no 30° dia de pós-operatrório. Em ambos os grupos observou-se reducao das aderências entre o 30° e o 60° dias de pós-operatório, contudo sem diferenca estatística. As aderências observadas foram classificadas principalmente de frouxas. Nao se observou a ocorrencia de complicacoes envolvendo vísceras intraabdominais. No Grupo Parietex houve a ocorrência de formacao de ulceracao da pele que recobria a tela em quatro animais, em comparacao com um no grupo de experimentacao. No Grupo Parietex foi observada uma insuficiencia de reparo após 60 dias. Quanto ao depósito do colágeno tipos I e III, nao houve diferenca significativa entre os grupos. Os resultados da imunoistoquímica referentes aos anticorpos MMP-1 e MMP-8 também não demonstraram diferença significativa entre as telas. CONCLUSÃO: As duas telas pesquisadas obtiveram resultados semelhantes tanto nos aspectos macro como nos microscópicos, podendo ser consideradas semelhantes quanto ao reparo de defeitos cirúrgicos da parede ventral do abdome em coelhos.

Immunohistochemical evaluation of fibrillar components of the extracellular matrix of transversalis fascia and anterior abdominal rectus sheath in men with inguinal hernia

OBJECTIVE: to evaluate the role of fibrillar extracellular matrix components in the pathogenesis of inguinal hernias. METHODS: samples of the transverse fascia and of the anterior sheath of the rectus abdominis muscle were collected from 40 men aged between 20 and 60 years with type II and IIIA Nyhus inguinal hernia and from 10 fresh male cadavers (controls) without hernia in the same age range. The staining technique was immunohistochemistry for collagen I, collagen III and elastic fibers; quantification of fibrillar components was performed with an image analysis processing software. RESULTS: no statistically significant differences were found in the amount of elastic fibers, collagen I and collagen III, and the ratio of collagen I / III among patients with inguinal hernia when compared with subjects without hernia. CONCLUSION: the amount of fibrillar extracellular matrix components did not change in patients with and without inguinal hernia.

The effects of supraphysiological supplementation of b-carotene in spontaneously hypertensive rats (SHR and SHR-sp)

Objective: to investigate the effect of administration of supraphysiological âcaroteno on biological parameters (ectoscopy and blood pressure), laboratory (malondialdehyde) and histological (liver and carotid arteries) of spontaneously hypertensive rats prone to stroke (SHR-sp).Methods: we used 36 male rats were divided into three groups, each containing 12 rats Wistar, SHR and SHR-sp, subdivided into six control animals and six animals treated with supraphysiological doses of âcaroteno for two periods of ten weeks interspersed with one week interruption. In the experiment were assessed daily physical examination and blood pressure (plethysmography). At sacrifice, blood was collected for measurement of serum malondialdehyde, liver and carotid arteries for histological examination.Results: temporary change in color of the fur, decreased significantly (p<0.0001) blood pressure (20mg supplementation âcaroteno) and serum levels of malondialdehyde (p<0.05) and increased amount of elastic fibers in the carotid wall of SHR and SHR-sp.Conclusion: supplementation of supraphysiological âcaroteno caused no toxic effects, showed positive response in the modulation of blood pressure and lower serum malondialdehyde. No significant morphological changes were found in both groups, except an increase in the number of elastic fibers in the muscle layer carotid suggesting elastosis in SHR and SHR-sp.

Closure of large wounds using rubber bands in rabbits

OBJECTIVE: to verify the effectiveness of the rubber elastic band in the treatment of large wounds of the body wall of rabbits by means of traction of its edges. METHODS: we studied 30 New Zealand rabbits, divided into three groups (n=10): Group 1- healing by secondary intention; Group 2- removal and eutopic repositioning of skin as full thickness skin graft; Group 3- Approximation of wound edges with elastic rubber band. In all animals, we removed a segment of the back skin and subcutaneous tissue down to the fascia, in accordance with an acrylic mold of 8cm long by 12cm wide. All animals were observed for 21 days. RESULTS: two animals of groups 1 and 2 had wound abscess. In Group 2, there was partial or total graft loss in 90% of animals. The complete closure of the wounds was observed in four animals of Group 1, six of Group 2 and eight of Group 3. There was no difference between the scar resistance values of groups 2 and 3, which were higher than those in Group 1. The scars of the three groups were characterized by the presence of mature connective tissue mixed with blood vessels and inflammatory infiltration, predominantly polymorphonuclear. CONCLUSION: the tensile strength of the wound edges with rubber elastic band is as efficient as the skin graft to treat rabbits' large body wounds.

Efficacy of varicose vein surgery with preservation of the great safenous vein

OBJECTIVE: To evaluate the efficacy of surgical treatment of varicose veins with preservation of the great saphenous vein. METHODS: We conducted a prospective study of 15 female patients between 25 and 55 years of age with clinical, etiologic, anatomic and pathophysiologic (CEAP) classification 2, 3 and 4. The patients underwent surgical treatment of primary varicose veins with great saphenous vein (GSV) preservation. Doppler ultrasonography exams were carried out in the first and third months postoperatively. The form of clinical severity of venous disease, Venous Clinical Severity Score (VCSS) was completed before and after surgery. We excluded patients with history of deep vein thrombosis, smoking or postoperatively use of elastic stockings or phlebotonics. RESULTS: All patients had improved VCSS (p <0.001) and reduction in the diameter of the great saphenous vein (p <0.001). There was a relationship between VCSS and the GSV caliber, as well as with preoperative CEAP. There was improvement in CEAP class in nine patients when compared with the preoperative period (p <0.001). CONCLUSION: The varicose vein surgery with preservation of the great saphenous vein had beneficial effects to the GSV itself, with decreasing caliber, and to the symptoms when the vein had maximum caliber of 7.5 mm, correlating directly with the CEAP. The decrease in GSV caliber, even without complete abolition of reflux, leads to clinical improvement by decreasing the reflux volume.

Arterial diffuse intimal thickening associated with enzootic calcinosis of sheep

Morphometric, immunohistochemical and ultrastructural studies were carried out on the diffuse intimal thickening (DIT) in arteries of 7 sheep with clinical signs of naturally occurring enzootic calcinosis due to ingestion of the plant Nierembergia veitchii. Arterial lesions consisted of medial deposition of calcium salts and DIT. Calcification of the intima was rare, mild and located near the elastic lamina. By immunohistochemistry a-actin was detected in cells of the media and in cells forming the intimal thickening. Receptors for 1,25(OH)2 vitamin D3 were detected in nuclei of intimal, medial and endothelial cells. DIT was irregularly distributed and was neither proportionally related to the intensity of the underlying mineralization area nor to the thickening of the remaining media. Ultrastructural morphometry in smooth muscle cells (SMCs) of the media and thickened intima revealed, in the latter, an increase of 318% in the volumetric fraction of those organelles involved in synthesis and a proportional decrease in contractile elements when compared to normal values of media cells. There were histological and ultrastructural evidences of modification of SMCs and their migration to the intima, where they proliferated causing DIT. It was concluded that DIT is a consistent component of arteriosclerotic lesions in N. veitchii induced calcinosis of sheep and that the predominant cell in this process is the SMCs originated from its predecessors of the media. It is suggested that the inducing factor for the arterial changes is 1,25(OH)2 D3 present in N. veitchii.

Experimental poisoning by Senecio brasiliensis in calves: quantitative and semi-quantitative study on changes in the hepatic extracellular matrix and sinusoidal cells

Extracellular matrix plays an important role in chronic hepatic lesions and has been studied in experimental intoxication models. However in cattle, studies on chronic disease have focused on the hepatocellular damage and extracellular matrix (ECM) changes are usually overlooked. There are no specific studies on the hepatic ECM in either normal or chronically damaged bovine liver. Thus an experimental model of hepatic toxicity model using Senecio brasiliensis poisoned calves was designed. Senecio brasiliensis contains pyrrolizidine alkaloids which cause either acute or chronic progressive dose dependent liver damage. Five calves were orally fed with 0.38g of dry leaves of S. brasiliensis/kg/day for 24 days. Liver needle biopsy specimens were obtained every 15 days for 60 days. Clinical signs of digestive complications appeared at 3rd week. One calf died on 45th day and four were evaluated up to 60th day. Biopsy samples were processed for routine light microscopy, immuno-histochemistry and transmission electron microscopy. From 30th day on progressive liver damage characterized by hepatocellular ballooning, necrosis, apoptosis and megalocytosis, centrilobular, pericellular and portal fibrosis were seen by light microscopy. Quantitative and semi-quantitative measurements of hepatic ECM components were performed before and after the onset of lesions. Morphometric analysis of total collagen and elastic fiber system was conducted. Total collagen and I and III collagen types progressively increased in throughout the liver of affected calves. Changes in location, amount and disposition of the elastic fiber system were also observed. Then numbers of Kupffer cells were significantly increased at 30th day and total numbers of sinusoidal cells were significantly increased at 45th and 60th days. Liver damage was progressive and irreversible even after the exposure to the plant was discontinued. Severe fibrotic lesions occurred mainly in portal tracts, followed by veno-occlusive and pericellular fibrosis. Collagen types I and III s were present in every normal and damaged liver, with predominance of type I. In affected calves the increase of total collagen and elastic fibers system paralleled the number of total sinusoidal cells.

Morphological aspects of buffaloes (Bubalus bubalis) umbilical cord

Buffalo is an important livestock resource, with a great participation in agricultural systems, providing milk, meat, and work power. Umbilical cord is responsible for maternal-fetal nutrients exchange during pregnancy, and its alterations can compromise the fetal development. We investigated ten pregnant uteruses collected from cross-bread buffaloes in different stages of gestation. Pregnancy and fetal age was determined by measuring the apex sacral length and development period was calculated by previously published formula. Umbilical cords were measured for length determination. Umbilical cord vascular net and anastomosis were observed by injection of Neoprene latex. Histological sections of the umbilical cord were studied after stain with HE, picrossirius, toluidine blue, orceine, and PAS reaction. Buffaloes' umbilical cord was formed by two central arteries, an allantois duct and two peripheral veins. The artery wall was composed by large quantity of collagen, elastic fibers, fibroblasts and large number of vasa vasorum. The allantois duct was located between the arteries and presented a great number of small nourishing vessels. Small nourishing vessels should be carefully considered to avoid to be mistaken to the arterials and veins vasa vasorum. Medium length of umbilical cord from buffalos was 11.8cm (minimum of 6.8cm and maximum of 17.4cm).

Be-Fe coupled method for the analysis of 3D elastodynamic problems in the time domain

By coupling the Boundary Element Method (BEM) and the Finite Element Method (FEM) an algorithm that combines the advantages of both numerical processes is developed. The main aim of the work concerns the time domain analysis of general three-dimensional wave propagation problems in elastic media. In addition, mathematical and numerical aspects of the related BE-, FE- and BE/FE-formulations are discussed. The coupling algorithm allows investigations of elastodynamic problems with a BE- and a FE-subdomain. In order to observe the performance of the coupling algorithm two problems are solved and their results compared to other numerical solutions.

Contact with friction using the augmented Lagrangian Method: a conditional constrained minimization problem

This work presents a formulation of the contact with friction between elastic bodies. This is a non linear problem due to unilateral constraints (inter-penetration of bodies) and friction. The solution of this problem can be found using optimization concepts, modelling the problem as a constrained minimization problem. The Finite Element Method is used to construct approximation spaces. The minimization problem has the total potential energy of the elastic bodies as the objective function, the non-inter-penetration conditions are represented by inequality constraints, and equality constraints are used to deal with the friction. Due to the presence of two friction conditions (stick and slip), specific equality constraints are present or not according to the current condition. Since the Coulomb friction condition depends on the normal and tangential contact stresses related to the constraints of the problem, it is devised a conditional dependent constrained minimization problem. An Augmented Lagrangian Method for constrained minimization is employed to solve this problem. This method, when applied to a contact problem, presents Lagrange Multipliers which have the physical meaning of contact forces. This fact allows to check the friction condition at each iteration. These concepts make possible to devise a computational scheme which lead to good numerical results.

Effect of particle morphology on the mechanical and thermo-mechanical behavior of polymer composites

Fiber reinforced polymer composites have been used in many applications, such as in automobile, aerospace and naval industries, due basically to their high strength-to-weight and modulus-to-weight, among other properties. Even though particles are usually not able to lead to the level of reinforcement of fibers, particle reinforced polymer composites have been proposed for many new applications due to their low cost, easy fabrication and isotropic properties. In this work, polymer composites were prepared by incorporating glass particles of different morphologies on poly(aryl sulfones) matrices. Particles with aspect ratios equal to 1, 2.5 and 10 were used. The prepared composites were characterized using electron microscopy and thermal analysis. Mechanical properties of the composites were evaluated using a four-point bending test. The thermo-mechanical behavior of the obtained composites was also investigated. The results showed that the morphology of the particles alter significantly the mechanical properties of composites. Particles with larger values of aspect ratio led to large elastic modulus but low levels of strain at failure. This result was explained by modeling the thermo-mechanical behavior of the composites using a viscoelastic model. Parameters of the model, obtained from a Cole-Cole type of plot, demonstrated that interactions at the polymer-reinforcing agent interface were higher for composites with large aspect ratio particles. Higher levels of interactions at interfaces can lead to higher degrees of stress transfer and, consequently, to composites with large elastic modulus, as experimentally observed.

A new approach to evaluate imperfection sensitivity in asymmetric bifurcation buckling analysis

A direct procedure for the evaluation of imperfection sensitivity in bifurcation problems is presented. The problems arise in the context of the general theory of elastic stability for discrete structural systems, in which the energy criterion of stability of structures and the total potential energy formulation are employed. In cases of bifurcation buckling the sensitivity of the critical load with respect to an imperfection parameter e is singular at the state given by epsilon =0, so that, a regular perturbation expansion of the solution is not possible. In this work we describe a direct procedure to obtain the relations between the critical loads, the generalized coordinates at the critical state, the eigenvector, and the amplitude of the imperfection, using singular perturbation analysis. The expansions are assumed in terms of arbitrary powers of the imperfection parameter, so that both exponents and coefficients of the expansion are unknown. The solution of the series exponents is obtained by searching the least degenerate solution. The formulation is here applied to asymmetric bifurcations, for which explicit expressions of the coefficients are obtained. The use of the method is illustrated by a simple example, which allows consideration of the main features of the formulation.

Object-oriented Programming Applied to the Development of Structural Analysis and Optimization Software

This paper presents the development of a two-dimensional interactive software environment for structural analysis and optimization based on object-oriented programming using the C++ language. The main feature of the software is the effective integration of several computational tools into graphical user interfaces implemented in the Windows-98 and Windows-NT operating systems. The interfaces simplify data specification in the simulation and optimization of two-dimensional linear elastic problems. NURBS have been used in the software modules to represent geometric and graphical data. Extensions to the analysis of three-dimensional problems have been implemented and are also discussed in this paper.

A Design Methodology for the Compensation of Positioning Deviation in Gantry Manipulators

This work presents recent results concerning a design methodology used to estimate the positioning deviation for a gantry (Cartesian) manipulator, related mainly to structural elastic deformation of components during operational conditions. The case-study manipulator is classified as gantry type and its basic dimensions are 1,53m x 0,97m x 1,38m. The dimensions used for the calculation of effective workspace due to end-effector path displacement are: 1m x 0,5m x 0,5m. The manipulator is composed by four basic modules defined as module X, module Y, module Z and terminal arm, where is connected the end-effector. Each module controlled axis performs a linear-parabolic positioning movement. The planning path algorithm has the maximum velocity and the total distance as input parameters for a given task. The acceleration and deceleration times are the same. Denavit-Hartemberg parameterization method is used in the manipulator kinematics model. The gantry manipulator can be modeled as four rigid bodies with three degrees-of-freedom in translational movements, connected as an open kinematics chain. Dynamic analysis were performed considering inertial parameters specification such as component mass, inertia and center of gravity position of each module. These parameters are essential for a correct manipulator dynamic modelling, due to multiple possibilities of motion and manipulation of objects with different masses. The dynamic analysis consists of a mathematical modelling of the static and dynamic interactions among the modules. The computation of the structural deformations uses the finite element method (FEM).

On non-ideal and non-linear portal frame dynamics analysis using bogoliubov averaging method

We apply the Bogoliubov Averaging Method to the study of the vibrations of an elastic foundation, forced by a Non-ideal energy source. The considered model consists of a portal plane frame with quadratic nonlinearities, with internal resonance 1:2, supporting a direct current motor with limited power. The non-ideal excitation is in primary resonance in the order of one-half with the second mode frequency. The results of the averaging method, plotted in time evolution curve and phase diagrams are compared to those obtained by numerically integrating of the original differential equations. The presence of the saturation phenomenon is verified by analytical procedures.