Potential sources of biodynamically active natural products in Brazil

In contrast to China where vegatation is predominantly herbaceous, vegetation in Brazil is commonly arboreous. This fact may explain why Chinese drugs are usually acetate derived, while actual and potential natural therapeutic agents from Brazil are mostly shikimate derived. Only relatively few compounds isolated from Brazilian plants have been submitted to adequate pharmacological testing

Marine organisms: an alternative source of potentially valuable natural products

This paper recalls the outcoming of marine natural products research and reviews a selection of marirne bioactive metabolites in current use together with promising trends in marine pharmacology.

Development of natural products as drugs acting on central nervous system

We have recenty studied several natural product constituents which have effects on the CNS. (1) Tetrahydropalmatine (THP) and its analogues were isolated from Corydalis ambigua and various species of Stephania. (+)-THP and (-)-THP posses not only analgesic activity, but also exert sedative-tranquillizing and hypnotic actions. Results of receptor binding assay and their pre-and post-synaptic effects on dopaminergic system indicate that (-)-THP and (-)-stepholidine are dopamine receptor antagonists while (+)-THP is a selective dopamine depletor. (2) 3-Acetylaconitine (AAC) is an alkaloid isolated from Aconitum flavum. The relative potency of analgesic action of AAC was 5.1-35.6 and 1250-3912 times that of morphine and aspirin, respectively. The analgesic effect of AAC was antagonized by naloxone, but was eliminated by reserpine. In monkeys, after AAC was injected for 92 days, no abstinence syndrome was seen after sudden AAC withdrawal or when challenged with nalorphine. (3) Huperzine A (Hup-A) is an alkaloid isolated from Huperzia serrata which was found to be a selective ChE inhibitor and could improve learning and retrieval process. Preliminary clinical studies showed that Hup-A improve short-and long-term memory in patients of cerebral arteriosclerosis with memory impairment. (4) Ranamargarin is a new tetradecapeptide isolated from the skin of the Chines frog Rana margaratae. This peptide may mainly act on NK-1 receptor.

Antimalarial chemotherapy with natural products and chemically defined molecules

In the present work we have described the in vivo antimalarial actrivity of six different plants. Two of them (Verninia brasiliana and Eupatorium squalidum) were tested in a randomic approach among 273 crude extracts from plants; four (Acanhospermum australe, Esenbeckia febrifuga, Lisianthus specious and Tachia guianensis) were selected after screening 22 crude extracts from different medicinal and some of them showed antimalarial activity in vitro. Some aspects of recent research with natural products aiming to produce drugs are discussed.

Evaluation of acute administration of natural products with potential diuretic effects, in humans

In order to evaluate the potential diuretic effect of two natural products, Elephantopus scaber and Alpinia speciosa, a trial administration was carried out in ten healthy volunteers and the effects compared to the those of a placebo. The substances were given on different days, with a seven day interval between doses. The amount of substance administered to the subjects was five times the usual dose i.e. 7.5 g/100 ml and 0.8 g/100 ml respectively. The following parameters parameteres were measured: urinary and plasma sodium, potassium, uric acid, calcium, phosphate, urea, creatinine. The subjects were also examined clinically and total urinary volume was assessed. The only significant finding (p < 0.05) was a slight diuresis with Alpinia speciosa, which also lowered the diastolic (p < 0.05) and systolic (p < 0.01) blood pressures. No effect on electrolytes or renal function parameters was observed, and this probably excludes any renal tubular or glomerular effect from these substances.

Medicinal products: regulation of biosynthesis in space and time

We live in a "Demon-Haunted World". Human health care requires the ever increasing resistance of pathogens to be confronted by a correspondingly fast rate of discovery of novel antibiotics. One of the possible strategies towards this objective involves the rational localization of bioactive phytochemicals. The conceptual basis of the method consists in the surprisingly little known gearings of natural products with morphology, ecology and evolution of their plant source, i. e. an introspection into the general mechanisms of nature.

Sequencing of simple sequence repeat anchored polymerase chain reaction amplification products of Biomphalaria glabrata

Simple sequence repeat anchored polymerase chain reaction amplification (SSR-PCR) is a genetic typing technique based on primers anchored at the 5' or 3' ends of microsatellites, at high primer annealing temperatures. This technique has already been used in studies of genetic variability of several organisms, using different primer designs. In order to conduct a detailed study of the SSR-PCR genomic targets, we cloned and sequenced 20 unique amplification products of two commonly used primers, CAA(CT)6 and (CA)8RY, using Biomphalaria glabrata genomic DNA as template. The sequences obtained were novel B. glabrata genomic sequences. It was observed that 15 clones contained microsatellites between priming sites. Out of 40 clones, seven contained complex sequence repetitions. One of the repeats that appeared in six of the amplified fragments generated a single band in Southern analysis, indicating that the sequence was not widespread in the genome. Most of the annealing sites for the CAA(CT)6 primer contained only the six repeats found within the primer sequence. In conclusion, SSR-PCR is a useful genotyping technique. However, the premise of the SSR-PCR technique, verified with the CAA(CT)6 primer, could not be supported since the amplification products did not result necessarily from microsatellite loci amplification.

Therapeutic switching: from antidermatophytic essential oils to new leishmanicidal products

This study examined whether the antidermatophytic activity of essential oils (EOs) can be used as an indicator for the discovery of active natural products against Leishmania amazonensis. The aerial parts of seven plants were hydrodistilled. Using broth microdilution techniques, the obtained EOs were tested against three strains of dermatophytes (Trichophyton mentagrophytes, Microsporum gypseum and Microsporum canis). To compare the EOs antifungal and antiparasitic effects, the EOs activities against axenic amastigotes of L. amazonensis were concurrently evaluated. For the most promising EOs, their antileishmanial activities against parasites infecting peritoneal macrophages of BALB/c mice were measured. The most interesting antifungal candidates were the EOs from Cymbopogon citratus, Otacanthus azureus and Protium heptaphyllum, whereas O. azureus, Piper hispidum and P. heptaphyllum EOs exhibited the lowest 50% inhibitory concentration (IC50) values against axenic amastigotes, thus revealing a certain correspondence between both activities. The P. hispidum EO was identified as the most promising product in the results from the infected macrophages model (IC50: 4.7 µg/mL, safety index: 8). The most abundant compounds found in this EO were sesquiterpenes, notably curzerene and furanodiene. Eventually, the evaluation of the antidermatophytic activity of EOs appears to be an efficient method for identifying new potential drugs for the treatment of L. amazonensis.

The association between need for touch and desire for unique products and consumer (inter)dependent problem-solving

Some people cannot buy products without first touching them, believing that doing so will create more assurance and information and reduce uncertainty. The international consumer marketing literature suggests an instrument to measure consumers' necessity for pohysical contact, called Need for Touch (NFT). This paper analyzes whether the Need for Touch structure is empirically consistent. Based on a literature review, we suggest six hypotheses in order to assess the nomological, convergent, and discriminant validity of the phenomenon. Departing from these, data supported four assumptions in the predicted direction. Need for Touch was associated with Need for Input and with Need for Cognition. Need for Touch was not associated with traditional marketing channels. The results also showed the dual characterization of Need for Touch as a bi-dimensional construct. The moderator effect indicated that when the consumer has a higher (vs. lower) Need for Touch autotelic score, the experiential motivation for shopping played a more (vs. less) important role in impulsive motivation. Our Study 3 supports the NFT structure and shows new associations with the need for unique products and dependent decisions.

Nickel incorporation in Fe(II, III) hydroxysulfate Green Rust: effect on crystal lattice spacing and oxidation products

Ni(II)-Fe(II)-Fe(III) layered double hydroxides (LDH) or Ni-containing sulfate green rust (GR2) samples were prepared from Ni(II), Fe(II) and Fe(III) sulfate salts and analyzed with X ray diffraction. Nickel is readily incorporated in the GR2 structure and forms a solid solution between GR2 and a Ni(II)-Fe(III) LDH. There is a correlation between the unit cell a-value and the fraction of Ni(II) incorporated into the Ni(II)-GR2 structure. Since there is strong evidence that the divalent/trivalent cation ratio in GR2 is fixed at 2, it is possible in principle to determine the extent of divalent cation substitution for Fe(II) in GR2 from the unit cell a-value. Oxidation forms a mixture of minerals but the LDH structure is retained if at least 20 % of the divalent cations in the initial solution are Ni(II). It appears that Ni(II) is incorporated in a stable LDH structure. This may be important for two reasons, first for understanding the formation of LDHs, which are anion exchangers, in the natural environment. Secondly, this is important for understanding the fate of transition metals in the environment, particularly in the presence of reduced Fe compounds.

Extractants to assess zinc phytoavailability in mineral fertilizer and industrial by-products

Efficient analytical methods for the quantification of plant-available Zn contained in mineral fertilizers and industrial by-products are fundamental for the control and marketing of these inputs. In this sense, there are some doubts on the part of the scientific community as well as of the fertilizer production sector, whether the extractor requested by the government (Normative Instruction No. 28, called 2nd extractor), which is citric acid 2 % (2 % CA) (Brasil, 2007b), is effective in predicting the plant availability of Zn via mineral fertilizers and about the agronomic significance of the required minimal solubility of 60 % compared to the total content (HCl) (Brasil, 2007a). The purpose of this study was to evaluate the alternative extractors DTPA, EDTA, neutral ammonium citrate (NAC), buffer solution pH 6.0, 10 % HCl, 10 % sulfuric acid, 1 % acetic acid, water, and hot water to quantify the contents of Zn available for maize and compare them with indices of agronomic efficiency of fertilizers and industrial by-products when applied to dystrophic Clayey Red Latosol and Dystrophic Alic Red Yellow Latosol with medium texture. The rate of Zn applied to the soil was 5 mg kg-1, using the sources zinc sulfate, commercial granular zinc, ash and galvanic sludge, ash and two brass slags. Most Zn was extracted from the sources by DTPA, 10 % HCl, NAC, 1% acetic acid, and 10 % sulfuric acid. Recovery by the extractors 2 % CA, EDTA, water, and hot water was low. The agronomic efficiency index was found to be high when using galvanic sludge (238 %) and commercial granular zinc (142 %) and lower with brass slag I and II (67 and 27 %, respectively). The sources galvanizing ash and brass ash showed solubility lower than 60 % in 2 % CA, despite agronomic efficiency indices of 78 and 125 %, respectively. The low agronomic efficiency index of industrial by-products such as brass slag I and galvanizing ash can be compensated by higher doses, provided there is no restriction, as well as for all other sources, in terms of contaminant levels of arsenic, cadmium, chromium, lead, and mercury as required by law (Normative Instruction No 27/2006). The implementation of 2nd extractor 2 % CA and the requirement of minimum solubility for industrial by-products could restrict the use of alternative sources as potential Zn sources for plants.

PHYTOAVAILABILITY OF COPPER IN INDUSTRIAL BY-PRODUCTS AND MINERAL FERTILIZERS

Alternative copper (Cu) sources could be used in fertilizer production, although the bioavailability of copper in these materials is unknown. The objective of this study was to evaluate the extractants neutral ammonium citrate (NAC), 2 % citric acid, 1 % acetic acid, 10 % HCl, 10 % H2SO4, buffer solution pH 6.0, DTPA, EDTA, water, and hot water in the quantification of available Cu content in several sources, relating them to the relative agronomic efficiency (RAE) of wheat grown in a clayey Latossolo Vermelho eutrófico (Oxisol) and Neossolo Quartzarênico (Typic Quartzipsamment). Copper was applied at the rate of 1.5 mg kg-1 as scrap slag, brass slag, Cu ore, granulated copper, and copper sulfate. The extractants 10 % HCl, 10 % H2SO4, and NAC extracted higher Cu concentrations. The RAE values of brass slag and Cu ore were similar to or higher than those of Cu sulfate and granulated Cu. Solubility in the 2nd NAC extractant, officially required for mineral fertilizers with Cu, was lower than 60 % for the scrap slag, Cu ore, and granulated copper sources. This fact indicates that adoption of the NAC extractant may be ineffective for industrial by-products, although no extractant was more efficient in predicting Cu availability for wheat fertilized with the Cu sources tested.

Dietary effects on muscle fatty acid composition of finished heifers

The effects of diet on Longissimus muscle fatty acid composition was determined using 24 crossbred heifers of Simmental vs. Nelore and Limousin vs. Nelore. The experimental diets were: 1) corn and yeast (CY); 2) corn, cottonseed meal + meat and bones meal (CMB); 3) cassava hull and yeast (CHY); 4) cassava hull, cottonseed meal + meat and bones meal (CHMB). Feeding CHMB diets resulted in lower lipid and higher cholesterol contents (P<0.05) for both crosses. Most of the identified fatty acids were monounsaturated, and the highest percentage was found to oleic acid (C18:1w9), with values ranging from 32.54 to 46.42%. Among the saturated fatty acids the palmitic acid (C16:0) showed the highest percentage, with its contents ranging between 19.40 and 32.44%. The highest polyunsaturated/saturated fatty acid ratio was of 0.30, and the lowest was of 0.08. Feeding CY diets resulted in lower cholesterol and higher polyunsaturated fatty acid contents of the Longissimus muscle.

Plant compounds insecticide activity against Coleoptera pests of stored products

The objective of this work was to screen plants with insecticide activity, in order to isolate, identify and assess the bioactivity of insecticide compounds present in these plants, against Coleoptera pests of stored products: Oryzaephilus surinamensis L. (Silvanidae), Rhyzopertha dominica F. (Bostrichidae) and Sitophilus zeamais Mots. (Curculionidae). The plant species used were: basil (Ocimum selloi Benth.), rue (Ruta graveolens L.), lion's ear (Leonotis nepetifolia (L.) R.Br.), jimson weed (Datura stramonium L.), baleeira herb (Cordia verbenacea L.), mint (Mentha piperita L.), wild balsam apple (Mormodica charantia L.), and billy goat weed or mentrasto (Ageratum conyzoides L.). The insecticide activity of hexane and ethanol extracts from those plants on R. dominica was evaluated. Among them, only hexane extract of A. conyzoides showed insecticide activity; the hexane extract of this species was successively fractionated by silica gel column chromatography, for isolation and purification of the active compounds. Compounds 5,6,7,8,3',4',5'-heptamethoxyflavone; 5,6,7,8,3'-pentamethoxy-4',5'-methilenedioxyflavone and coumarin were identified. However, only coumarin showed insecticide activity against three insect pests (LD50 from 2.72 to 39.71 mg g-1 a.i.). The increasing order of insects susceptibility to coumarin was R. dominica, S. zeamais and O. surinamensis.