Caracterização micropedológica de alguns solos da Zona da Mata Mineira

Realizou-se o estudo micromorfológico de oito solos da Zona da Mata Mineira, incluindo um Latossolo Una, dois Podzólicos Vermelho-Escuros, dois Brunizéns Avermelhados, uma Terra Roxa Estruturada, um Vertissolo e um Podzólico Vermelho-Amarelo câmbico. Após coleta, impregnação, polimerização e preparo de seções finas, estas foram analisadas por microscopia óptica para estudo micropedológico, caracterizando a microestrutura, porosidade, esqueleto, organização do plasma e estruturas associadas, com destaque para a argila iluviada. Em adição, análises em microscópio eletrônico de varredura da superfície de agregados foram realizadas em agregados individualizados. O horizonte B do Latossolo estudado apresenta forte microestrutura com influência de atividade biológica, que tende a coalescer intensamente em profundidade e torna-se apédico no saprolito, separado por cascalheiro de quartzo. Nódulos de hematita em processo de degradação foram observados, indicando o processo atual de goethização dos solos, notadamente no Vertissolo e no Latossolo Una. O estudo micromorfológico evidenciou solos com Bt que apresentaram cerosidade forte em observação macroscópica e não a evidenciaram claramente em microscópio, sendo esse fato mais marcante nos solos mais vermelhos. Solos com Bt mais amarelados mostraram cerosidade fraca no campo, com correspondente detecção de cutãs iluviais em microscopia óptica. O Podzólico Vermelho-Amarelo câmbico, com cerosidade fraca e comum no campo, não teve sua presença confirmada em nível microscópico, evidenciando seu caráter câmbico. Esse solo evidencia nódulos de hematita circundados por gibbsita, o que poderia contribuir para explicar a manutenção dos altos teores de óxidos de ferro desses solos. A não-confirmação, ao microscópio, da cerosidade descrita em campo nos solos com Bt indica a necessidade da intensificação de estudos (descrição x micropedologia) na tentativa de melhor aferição e consistência de resultados.

Atributos micromorfológicos de solos do Projeto Jaíba, norte de Minas Gerais

Amostras indeformadas de horizontes representativos de solos do Projeto Jaíba, norte de Minas Gerais, e camadas compactadas e não compactadas de solos sob uso intensivo foram coletadas e analisadas micromorfologicamente, com vistas em obter maiores informações relativas ao seu grau de evolução e avaliar as alterações causadas nos solos pelo uso agrícola. Foram estudados quatro solos derivados de calcário (P1, P2, P3 e P4) e um originado a partir de sedimentos detríticos (P5), além das camadas com e sem indícios de compactação. A micromorfologia revelou que os solos apresentam características bastante distintas e variáveis, dependendo da classe e do material de origem. O Cambissolo originado de calcário tem como característica marcante o fluxo vertical de sílica e argila, sem, no entanto, caracterizar horizonte B textural, além de maior desenvolvimento de estrutura em blocos. O Cambissolo originado de sedimentos detríticos apresenta fluxo lateral de argila, presença marcante de cutãs de difusão de ferro e estrutura menos desenvolvida tendendo a granular. O Podzólico Vermelho-Escuro apresentou estrutura em blocos e presença de cutãs de deposição, muitos destes incorporados pela matriz, o que pode indicar transição para Latossolo. Os Latossolos apresentam-se com estrutura granular, mas esta é muito menos desenvolvida que a observada para os Latossolos gibbsíticos já analisados no País, o que pode indicar um menor grau de evolução destes solos. A atividade da fauna parece ser o principal agente responsável pelo desenvolvimento da microestrutura do Podzólico e dos Latossolos. Quanto à compactação, a micromorfologia relevou diferenças na organização do plasma e na forma dos poros, quando se compararam camadas compactadas com não compactadas. De maneira geral, o plasma das camadas compactadas é mais denso e os poros se apresentam alterados em razão do esforço físico impingido aos solos.

Pedogênese de uma seqüência de solos desenvolvidos de arenito na região de Piracicaba (SP)

O trabalho abordou a formação de solos com horizonte B textural e teve por objetivo identificar os processos pedogenéticos envolvidos na formação de lamelas, do gradiente textural abrupto, assim como suas implicações sobre os atributos físicos, químicos e mineralógicos do solo. O estudo foi desenvolvido numa toposseqüência de solos derivados de arenito: o perfil (P1), ocorrendo na parte alta do relevo (topo); perfil (P2), na faixa intermediária (terço médio da encosta), e perfil (P3), no terço inferior da encosta. As análises realizadas foram: granulométrica, química, mineralógica e micromorfológica. Os perfis apresentaram seqüência de horizontes do tipo A-E-Bt, tendo sido classificados como Alissolos Crômicos. Os solos foram classificados como quimicamente ácidos, com mineralogia da fração argila mostrando predomínio de caulinita. Os materiais analisados evidenciaram uniformidade quanto à granulometria, diâmetro médio, arredondamento e relação zircão/turmalina das areias, assim como no aspecto morfológico, apontando para formação autóctone do solo. Os processos pedogenéticos responsáveis pela formação do gradiente textural foram a degradação das argilas em condições de oxirredução e a lessivagem. O primeiro processo foi constatado em microdomínios no contato E/Bt, onde se notaram cores de gleização, indicando encharcamento temporário. Neste caso, a formação do horizonte álbico deveu-se principalmente à destruição do topo do horizonte Bt. As lamelas nada mais seriam do que heranças do horizonte Bt no horizonte álbico. A presença de cerosidade, associada aos cutãs de iluviação no exame micromorfológico, revelou a participação do processo de lessivagem contribuindo para a diferenciação textural.

Coffee leaf and stem anatomy under boron deficiency

Boron deficiency in coffee is widely spread in Brazilian plantations, but responses to B fertilizer have been erratic, depending on the year, form and time of application and B source. A better understanding of the effects of B on plant physiology and anatomy is important to establish a rational fertilization program since B translocation within the plant may be affected by plant anatomy. In this experiment, coffee plantlets of two varieties were grown in nutrient solutions with B levels of 0.0 (deficient), 5.0 µM (adequate) and 25.0 µM (high). At the first symptoms of deficiency, leaves were evaluated, the cell walls separated and assessed for B and Ca concentrations. Scanning electron micrographs were taken of cuts of young leaves and branch tips. The response of both coffee varieties to B was similar and toxicity symptoms were not observed. Boron concentrations in the cell walls increased with B solution while Ca concentrations were unaffected. The Ca/B ratio decreased with the increase of B in the nutrient solution. In deficiency of B, vascular tissues were disorganized and xylem walls thinner. B-deficient leaves had fewer and deformed stomata.

Liming influence on soil chemical properties, nutritional status and yield of alfalfa grown in acid soil

Alfalfa is an important forage crop with high nutritive value, although highly susceptible to soil acidity. Liming is one of the most efficient and prevailing practices to correct soil acidity and improve alfalfa yield. The objective of this study was to evaluate response to liming of alfalfa grown in a greenhouse on a Typic Quartzipsamment soil. The treatments consisted of four lime rates (0, 3.8, 6.6 and 10.3 Mg ha-1) and two cuts. Alfalfa dry matter increased quadratically with increasing lime rates. In general, dry matter yield was maximized by a lime rate of 8.0 Mg ha-1. Except for the control, the dry matter nutrient contents in the treatments were adequate. The positive linear correlation between root and nodule dry matter with lime rates indicated improvement of these plant traits with decreasing soil acidity. The soil acidity indices pH, base saturation, Ca2+ concentration, Mg2+ concentration, and H + Al were relevant factors in the assessment of alfalfa yield. The magnitude of influence of these soil acidity indices on yield as determined by the coefficient of determination (R²) varied and decreased in the order: base saturation, H + Al, pH, Ca and Mg concentrations. Optimum values of selected soil chemical properties were defined for maximum shoot dry matter; these values can serve as a guideline for alfalfa liming to improve the yield of this forage on acid soils.

Soil physical properties and sugarcane root growth in a red oxiso

Sugarcane, which involves the use of agricultural machinery in all crop stages, from soil preparation to harvest, is currently one of the most relevant crops for agribusiness in Brazil. The purpose of this study was to investigate soil physical properties and root growth in a eutroferric red Oxisol (Latossolo Vermelho eutroférrico) after different periods under sugarcane. The study was carried out in a cane plantation in Rolândia, Paraná State, where treatments consisted of a number of cuts (1, 3, 8, 10 and 16), harvested as green and burned sugarcane, at which soil bulk density, macro and microporosity, penetration resistance, as well as root length, density and area were determined. Results showed that sugarcane management practices lead to alterations in soil penetration resistance, bulk density and porosity, compared to native forest soil. These alterations in soil physical characteristics impede the full growth of the sugarcane root system beneath 10 cm, in all growing seasons analyzed.

Impacts of land leveling on lowland soil physical properties

The practice of land leveling alters the soil surface to create a uniform slope to improve land conditions for the application of all agricultural practices. The aims of this study were to evaluate the impacts of land leveling through the magnitudes, variances and spatial distributions of selected soil physical properties of a lowland area in the State of Rio Grande do Sul, Brazil; the relationships between the magnitude of cuts and/or fills and soil physical properties after the leveling process; and evaluation of the effect of leveling on the spatial distribution of the top of the B horizon in relation to the soil surface. In the 0-0.20 m layer, a 100-point geo-referenced grid covering two taxonomic soil classes was used in assessment of the following soil properties: soil particle density (Pd) and bulk density (Bd); total porosity (Tp), macroporosity (Macro) and microporosity (Micro); available water capacity (AWC); sand, silt, clay, and dispersed clay in water (Disp clay) contents; electrical conductivity (EC); and weighted average diameter of aggregates (WAD). Soil depth to the top of the B horizon was also measured before leveling. The overall effect of leveling on selected soil physical properties was evaluated by paired "t" tests. The effect on the variability of each property was evaluated through the homogeneity of variance test. The thematic maps constructed by kriging or by the inverse of the square of the distances were visually analyzed to evaluate the effect of leveling on the spatial distribution of the properties and of the top of the B horizon in relation to the soil surface. Linear regression models were fitted with the aim of evaluating the relationship between soil properties and the magnitude of cuts and fills. Leveling altered the mean value of several soil properties and the agronomic effect was negative. The mean values of Bd and Disp clay increased and Tp, Macro and Micro, WAD, AWC and EC decreased. Spatial distributions of all soil physical properties changed as a result of leveling and its effect on all soil physical properties occurred in the whole area and not specifically in the cutting or filling areas. In future designs of leveling, we recommend overlaying a cut/fill map on the map of soil depth to the top of the B horizon in order to minimize areas with shallow surface soil after leveling.

Aggregate stability by the "high energy moisture characteristic" method in an oxisol under differentiated management

Studies testing the High Energy Moisture Characteristic (HEMC) technique in tropical soils are still incipient. By this method, the effects of different management systems can be evaluated. This study investigated the aggregation state of an Oxisol under coffee with Brachiaria between crop rows and surface-applied gypsum rates using HEMC. Soil in an experimental area in the Upper São Francisco region, Minas Gerais, was studied at depths of 0.05 and 0.20 m in coffee rows. The treatments consisted of 0, 7, and 28 Mg ha-1 of agricultural gypsum rates distributed on the soil surface of the coffee rows, between which Brachiaria was grown and periodically cut, and compared with a treatment without Brachiaria between coffee rows and no gypsum application. To determine the aggregation state using the HEMC method, soil aggregates were placed in a Büchner funnel (500 mL) and wetted using a peristaltic pump with a volumetric syringe. The wetting was applied increasingly at two pre-set speeds: slow (2 mm h-1) and fast (100 mm h-1). Once saturated, the aggregates were exposed to a gradually increasing tension by the displacement of a water column (varying from 0 to 30 cm) to obtain the moisture retention curve [M = f (Ψ) ], underlying the calculation of the stability parameters: modal suction, volume of drainable pores (VDP), stability index (slow and fast), VDP ratio, and stability ratio. The HEMC method conferred sensitivity in quantifying the aggregate stability parameters, and independent of whether gypsum was used, the soil managed with Brachiaria between the coffee rows, with regular cuts discharged in the crop row direction, exhibited a decreased susceptibility to disaggregation.

SYMBIOTIC EFFECTIVENESS AND COMPETITIVENESS OF CALOPO RHIZOBIAL ISOLATES IN AN ARGISSOLO VERMELHO-AMARELO UNDER THREE VEGETATION COVERS IN THE DRY FOREST ZONE OF PERNAMBUCO

Biological N fixation in forage legumes is an important alternative to reduce pasture degradation, and is strongly influenced by the inoculant symbiotic capability. This paper evaluates the effectiveness of Calopo (Calopogonium mucunoides) rhizobial isolated from soil under three vegetation covers of an Argissolo Vermelho-Amarelo of the Dry Forest Zone of Pernambuco. An experiment was conducted evaluating 25 isolates, aside from 5 uninoculated controls with 0; 309; 60; 90 and 120 kg ha-1 N, and a treatment inoculated with the SEMIA 6152 strain. The first cut was performed 45 days after inoculation and a second and third cut after 45-day-intervals. Shoot N content was quantified at all cuts. Shoot dry mass was affected by N rates at all cuts. Shoot dry mass increased from the first to the second cut in inoculated plants. There was no difference between rhizobial isolates from the different plant covers for any of the variables. Most variables were significantly and positively correlated.

Performance and hormonal profile in broiler chickens fed with different energy levels during post restriction period

The aim of this work was to investigate the influence of diet energy level on performance and hormonal profiles of broilers during post restriction period. It was a split-plot experiment, and the main treatments were in a 2x2 factorial scheme. Birds were fed restricted to 30% of the ad libitum intake, from 7 to 14 days of age. After the restriction period, birds were fed ad libitum with diets containing low (2,900 kcal ME/kg) or high (3,200 kcal ME/kg) energy until 49 days of age. Broilers fed with high energy ration showed lower feed intake and better feed conversion and decreased carcass protein; however, abdominal fat pad, and total carcass fat were not affected by ration energy levels or feeding program. Neither diet energy level nor feed restriction program changed body weight at 49 days. The profile of insulin-like growth factor-1 (IGF-1) was reduced during the feed restriction period, but increased at refeeding period. Feeding program and ration energy level did not affect T3, T4 and growth hormone serum concentrations. Feed restriction at 30% of ad libitum intake is not enough to promote changes on carcass quality, related to fat deposition, and on metabolic hormone levels, except IGF-1 seric level that has rapid increase after feed restriction.

Biometrical analysis and selection of tetraploid progenies of Panicum maximum using mixed model methods

The objectives of this work were to estimate the genetic and phenotypic parameters and to predict the genetic and genotypic values of the selection candidates obtained from intraspecific crosses in Panicum maximum as well as the performance of the hybrid progeny of the existing and projected crosses. Seventy-nine intraspecific hybrids obtained from artificial crosses among five apomictic and three sexual autotetraploid individuals were evaluated in a clonal test with two replications and ten plants per plot. Green matter yield, total and leaf dry matter yields and leaf percentage were evaluated in five cuts per year during three years. Genetic parameters were estimated and breeding and genotypic values were predicted using the restricted maximum likelihood/best linear unbiased prediction procedure (REML/BLUP). The dominant genetic variance was estimated by adjusting the effect of full-sib families. Low magnitude individual narrow sense heritabilities (0.02-0.05), individual broad sense heritabilities (0.14-0.20) and repeatability measured on an individual basis (0.15-0.21) were obtained. Dominance effects for all evaluated characteristics indicated that breeding strategies that explore heterosis must be adopted. Less than 5% increase in the parameter repeatability was obtained for a three-year evaluation period and may be the criterion to determine the maximum number of years of evaluation to be adopted, without compromising gain per cycle of selection. The identification of hybrid candidates for future cultivars and of those that can be incorporated into the breeding program was based on the genotypic and breeding values, respectively. The prediction of the performance of the hybrid progeny, based on the breeding values of the progenitors, permitted the identification of the best crosses and indicated the best parents to use in crosses.

Allohexaploid pearl millet x elephantgrass population potential for a recurrent selection program

The objective of this work was to evaluate the potential of allohexaploid pearl millet x elephantgrass (HGL) population for a recurrent selection program through open-pollinated progenies. Seventy-eight progenies, one representative sample of the population, and two commercial cultivars, Pioneiro and Paraíso, were evaluated in a 9x9 triple lattice design, in two sites. Plant height and dry matter yield were evaluated in three and four cuts, respectively. For plant height, the 17 best progenies were similar to both commercial controls, while for dry matter yield they were higher than 'Paraíso' and lower than 'Pioneiro'. The correlation between progenies and cuts indicated that the fourth cut represents the mean of all cuts, and the possibility of using early selection. Heritability estimates considering cuts and sites were 56.9% for plant height and 58.8% for dry matter yield, and the expected response to selection was 23.4% for dry matter yield and 18.1% for plant height. These results demonstrate the promising HGL population potential for a recurrent selection program.

Genetic polymorphisms related to meat traits in purebred and crossbred Nelore cattle

The objective of this work was to estimate the allelic and genotypic frequencies of CAST/XmnI, a calpastatin gene polymorphism, and CAPN530, a calpain 1 large subunit gene polymorphism, in different beef genetic groups (Nelore and Nelore x Bos taurus), and to investigate associations between these polymorphisms and carcass and meat traits. Three hundred animals - comprising 114 Nelore, 67 Angus x Nelore, 44 Rubia Gallega x Nelore, 41 Canchim, 19 Brangus three-way cross and 15 Braunvieh three-way cross- were genotyped by PCR-RFLP and phenotyped for rib-eye area (REA), back-fat thickness (BT), intramuscular fat (IF), shear force (SF) and myofibrillar fragmentation index (MFI). The occurrence of the two alleles of the CAST/XmnI and CAPN530 single nucleotide polymorphisms (SNPs) in a B. indicus breed, which permitted association studies in purebred and crossbred Nelore cattle, was first shown in the present work. No relationship was found between the CAST or CAPN1 SNPs and growth-related traits (REA) or fat deposition (BT and IF), since calpastatin and µ-calpain are not physiologically involved with these traits. Moreover, the association results between genotypes and aged meat tenderness (assessed by SF and MFI) showed that these markers are useless in assisted selection for purebred Nelore and their crosses with B. taurus.

Piperine as a phytogenic additive in broiler diets

The objective of this work was to determine the effect of piperine as a phytogenic additive in chicken broiler diet. Seven‑day‑old male chicks were randomly allocated in four experimental treatments (n = 24), with four replicates (n = 6). The piperine was added to diets at concentrations of 0, 60, 120, and 180 mg kg‑1 for 35 consecutive days. The following were evaluated: biochemical, hematological and histopathological parameters; performance and carcass yield. Histomorphometric analyses were also carried out. The addition of 120 and 180 mg kg‑1 of piperine did not alter broiler body weight and feed conversion, whereas 60 mg kg‑1 of piperine interfered positively in both parameters from 36 to 42 days of age and significantly increased the absorption surface of the duodenum and the ileum. No macroscopic alteration in organ size and color was observed in the broilers fed diets with the evaluated concentrations of piperine. The supplementation of 120 and 180 mg kg‑1 of piperine is toxic to liver tissue and reduces the absorption surface of the jejune. The diet supplemented with 60 mg kg‑1 of piperine is safe.

Chemical and biological attributes of a lowland soil affected by land leveling

The objective of this work was to evaluate the relationship between soil chemical and biological attributes and the magnitude of cuts and fills after the land leveling process of a lowland soil. Soil samples were collected from the 0 - 0.20 m layer, before and after leveling, on a 100 point grid established in the experimental area, to evaluate chemical attributes and soil microbial biomass carbon (MBC). Leveling operations altered the magnitude of soil chemical and biological attributes. Values of Ca, Mg, S, cation exchange capacity, Mn, P, Zn, and soil organic matter (SOM) decreased in the soil profile, whereas Al, K, and MBC increased after leveling. Land leveling decreased in 20% SOM average content in the 0 - 0.20 m layer. The great majority of the chemical attributes did not show relations between their values and the magnitude of cuts and fills. The relation was quadratic for SOM, P, and total N, and was linear for K, showing a positive slope and indicating increase in the magnitude of these attributes in cut areas and stability in fill areas. The relationships between these chemical attributes and the magnitude of cuts and fills indicate that the land leveling map may be a useful tool for degraded soil recuperation through amendments and organic fertilizers.