Glyphosate behavior in a Rhodic Oxisol under no-till and conventional agricultural systems

The behavior of glyphosate in a Rhodic Oxisol, collected from fields under no-till and conventional management systems in Ponta Grossa, Parana state (Brazil) was investigated. Both agricultural systems had been in production for 23 years. Glyphosate mineralization, soil-bound forms, sorption and desorption kinetics, sorption/desorption batch experiments, and soil glyphosate phythoavailability (to Panicum maximum) were determined. The mineralization experiment was set up in a completely randomized design with a 2 x 2 factorial scheme (two management systems and two 14C radiolabelled positions in the glyphosate), with five replicates. 14CO2 evolution was measured in 7-day intervals during 63 days. The glyphosate sorption kinetics was investigated in a batch experiment, employing a glyphosate concentration of 0.84 mg L-1. The equilibration solution was 0.01 mol L-1 CaCl2 and the equilibration times were 0, 10, 30, 60, 120, 240, and 360 min. Sorption/desorption of glyphosate was also investigated using equilibrium batch experiments. Five different concentrations of the herbicide were used for sorption (0.42, 0.84, 1.68, 3.36, and 6.72 mg L-1) and one concentration for desorption. Glyphosate phytoavailability was analyzed in a 2 x 5 factorial scheme with two management systems and five glyphosate concentrations added to soil (0, 4.2, 8.4, 42.0, and 210.0 µg g-1) in a completely randomized design. Phytotoxicity symptoms in P. maximum were evaluated for different periods. The soil under both management systems showed high glyphosate sorption, which impeded its desorption and impaired the mineralization in the soil solution. Practically the total amount of the applied glyphosate was quickly sorbed (over 90 % sorbed within 10 min). Glyphosate bound to residues did not have adverse effects on P. maximum growth. The mineralization of glyphosate was faster under no-till and aminomethylphosphonic acid was the main glyphosate metabolite.

Simulação do transporte e da sorção de imazaquin em colunas de solo

Dentre os métodos disponíveis para avaliar o comportamento de agrotóxicos no solo, destacam-se o método "batch" (análise em batelada) e o deslocamento miscível. O objetivo deste estudo foi avaliar a sorção e a mobilidade do imazaquin em solos com diferentes características químicas, físicas e mineralógicas, utilizando as técnicas de deslocamento miscível e "batch". Os ensaios foram realizados no laboratório de Ecotoxicologia do Centro de Energia Nuclear na Agricultura da Universidade de São Paulo (CENA/USP), Piracicaba, São Paulo. Os solos utilizados, classificados como Neossolo Quartzarênico (RQ), Latossolo Vermelho-Amarelo (LVA) e Latossolo Vermelho distroférrico (LVdf), foram secos ao ar e peneirados em malha 2 mm, sendo então procedida a caracterização química, física e mineralógica das amostras. Foi selecionada para o estudo a molécula do Imazaquin. No ensaio do deslocamento miscível, foi aplicada uma solução de CaCl2, obtendo-se uma curva de eluição do Cl-, utilizado como traçador. As curvas de eluição do Cl- foram ajustadas a um modelo baseado na equação de convecção-dispersão para transporte ideal. Após a eluição do Cl-, aplicou-se a solução que continha 14C-imazaquin que gerou as curvas de eluição para esta molécula. A curva foi ajustada a um modelo bicontínuo que considera o não-equilíbrio durante o transporte. No ensaio de sorção com o método "batch", foram utilizadas soluções de imazaquin radiomarcado variando de 0,67 a 10,72 mmol L-1 para obtenção das isotermas ajustadas pela equação de Freundlich. A taxa de lixiviação foi alta para todos os solos, sendo maior para o RQ. As curvas de eluição do Cl- foram simétricas para todos os solos e apresentaram um bom ajuste ao modelo que considera o transporte ideal, indicando que não houve não-equilíbrio relacionado com o transporte. Para o imazaquin, as curvas de eluição foram assimétricas, com prolongamento da parte posterior da curva, e apresentaram bom ajuste ao modelo bicontínuo, evidenciando que ocorreu não-equilíbrio no processo de sorção. A comparação dos dois métodos empregados mostrou que o coeficiente de sorção determinado no método "batch" foi maior. Tal resultado evidencia que a sorção, durante o processo de lixiviação, pode ser superestimada por métodos que consideram a sorção sob condições de equilíbrio químico.

Cinética de solubilização de metais pesados por ácidos orgânicos em solos tratados com lodo de esgoto

A presença de ligantes orgânicos na rizosfera tem importante papel no processo de solubilização de metais pesados em solos tratados com lodo de esgoto. Ácidos orgânicos de baixo peso molecular exsudados por raízes e, ou, liberados por microrganismos são considerados agentes mobilizadores desses metais. No presente estudo, determinou-se a cinética de solubilização de Cu, Cr, Ni e Zn em solos tratados com lodo de esgoto, utilizando solução com mistura de quatro ácidos orgânicos (acético, cítrico, lático e oxálico) preparada para obter concentração final de 0,05 e 0,10 mol L-1. A extração foi feita segundo o método de "batch". A solução 0,10 mol L-1 de ácidos orgânicos extraiu maiores quantidades de Cu, Cr, Ni e Zn do que a solução 0,05 mol L¹. A cinética de solubilização apresentou duas fases: uma inicial, com rápida liberação dos metais, seguida de outra mais lenta, tendendo ao equilíbrio. As constantes de velocidade de solubilização mais altas foram observadas para Ni e Zn, seguidos de Cu e Cr. Os valores para o reservatório lábil variaram entre 2 e 15 % do total de cada metal pesado estudado. A porcentagem que este reservatório representou, em relação ao total, obedeceu à ordem: Zn > Cu @ Ni > Cr.

Adsorção de boro em solos ácricos em função da variação do pH

A adsorção de B pelo solo é o principal fenômeno que afeta sua disponibilidade e seu potencial de contaminação. Os objetivos deste estudo foram: (a) investigar os efeitos do pH na adsorção de B em amostras superficiais e subsuperficiais de um Latossolo Vermelho Acriférrico (LVwf) e de um Latossolo Amarelo Ácrico (LAw) - ambos com balanço positivo de cargas no horizonte Bw - e de um Nitossolo Vermelho eutroférrico (NVef); (b) avaliar a adequação do modelo de Langmuir em simular os resultados experimentais de adsorção; e (c) correlacionar os atributos químicos, físicos e mineralógicos dos solos com os valores de adsorção máxima (Ads máx) e do coeficiente de afinidade (K L), derivados das isotermas. Experimentos do tipo "batch" foram realizados para determinação da quantidade de boro adsorvido, tendo como eletrólito-suporte soluções de NaCl 0,01 mol L-1 com 0,1; 0,2; 0,4; 0,8; 1,2; 1,6; 2,0; e 4,0 µg mL-1 de B. Houve aumento da adsorção de B com a elevação do pH e da concentração inicial de B adicionado. Maiores quantidades de B foram adsorvidas na amostra superficial do NVef e nos horizontes Bw positivamente carregados dos Latossolos ácricos. A adsorção de B foi representada por isotermas dos tipos C (linear) e L (exponencial) e adequadamente ajustada pelo modelo de Langmuir. Os parâmetros Ads máx e K L estimados por regressão não-linear não se correlacionaram com o pH. No pH natural, teores de matéria orgânica (MO) e de argila foram as variáveis que mais influenciaram a Ads máx nas camadas superficiais. Nas camadas subsuperficiais, a Ads máx correlacionou-se negativamente com os teores de MO e positivamente com os de gibbsita. Teores de (hidr)óxidos de Fe cristalinos e amorfos estiveram correlacionados aos valores de K L obtidos nas amostras subsuperficiais e ao pH natural, bem como à Ads máx das camadas superficiais após aumento do pH.

O poder cognitivo das redes neurais artificiais modelo ART1 na recuperação da informação

O artigo relata um experimento de simulação computacional de um sistema de recuperação da informação composto por uma base de índices textuais de uma amostra de documentos, um software de rede neural artificial implementando conceitos da Teoria da Ressonância Adaptativa, para automação do processo de ordenação e apresentação de resultados, e um usuário humano interagindo com o sistema em processos de consulta. O objetivo do experimento foi demonstrar (i) a utilidade das redes neurais de Carpenter e Grossberg (1988) baseadas nessa teoria e (ii) o poder de resolução semântica com índices sintagmáticos da abordagem SiRILiCO proposta por Gottschalg-Duque (2005), para o qual um sintagma nominal ou proposição é uma unidade linguística constituda de sentido maior que o significado de uma palavra e menor que uma narrativa ou uma teoria. O experimento demonstrou a eficácia e a eficiência de um sistema de recuperação da informação combinando esses recursos, concluindo-se que um ambiente computacional dessa natureza terá capacidade de clusterização (agrupamento) variável on-line com entradas e aprendizado contínuos no modo não supervisionado, sem necessidade de treinamento em modo batch (off-line), para responder a consultas de usuários em redes de computadores com desempenho promissor.

Inter and intra-guild interactions in egg parasitoid species of the soybean stink bug complex

The objective of this research was to evaluate the parasitism behavior of Telenomus podisi Ashmead, Trissolcus basalis (Wollaston) e Trissolcus urichi Crawford (Hymenoptera: Scelionidae) on eggs of Nezara viridula L., Euschistus heros F., Piezodorus guildinii Westwood and Acrosternum aseadum Rolston (Heteroptera: Pentatomidae), in no choice and multiple choice experiments. For all parasitoid species, the results demonstrated the existence of a main host species that maximizes the reproductive success. The competitive interactions among the parasitoid species were investigated in experiments of sequential and simultaneous release of different combinations of parasitoid pairs on the hosts N. viridula, E. heros and A. aseadum. Exploitative competition was observed for egg batches at the genus level (Telenomus vs. Trissolcus) and interference competition at the species level (T. basalis vs. T. urichi). Trissolcus urichi was the most aggressive species, interfering with the parasitism of T. basalis. Generally, T. basalis showed an opportunistic behavior trying to parasitise eggs after T. urichi had abandoned the egg batch. The selection of parasitoid species for use in augmentative biological control programs should take into account the diversity of pentatomids present in soybean in addition to the interactions among the different species of parasitoids.

Imazaquin sorption in surface and subsurface soil samples

The objective of this work was to study the sorption and desorption of imazaquin, in surface and subsurface soil samples from Brazil. Sorption and desorption steps were carried out using batch equilibration and high performance liquid chromatography analytical routines. The value of Kf,ads was positively correlated with clay content, and negatively correlated with pH of supernatant. Samples from Typic Haplustox, clayey soil profile having high clay content, provided higher Kf,ads values, and negative correlation with organic carbon, silt content, cation exchange capacity and pH.

Zinc adsorption in highly weathered soils

The objective of this work was to assess the effects of pH and ionic strength upon zinc adsorption, in three highly weathered variable charge soils. Adsorption isotherms were elaborated from batch adsorption experiments, with increasing Zn concentrations (0-80 mg L-1), and adsorption envelopes were constructed through soil samples reactions with 0.01, 0.1 and 1 mol L-1 Ca(NO3)2 solutions containing 5 mg L-1 of Zn, with an increasing pH value from 3 to 8. Driving force of reaction was quantified by Gibbs free energy and separation factor. Isotherms were C-, H- and L-type and experimental results were fitted to nonlinear Langmuir model. Maximum adsorption ranged from 59-810 mg kg-1, and Zn affinity was greater in subsoil (0.13-0.81 L kg-1) than in the topsoil samples (0.01-0.34 L kg-1). Zinc adsorption was favorable and spontaneous, and showed sharply increase (20-90%) in the 4-6 pH range. No effect of ionic strength was observed at pH values below 5, because specific adsorption mechanisms predominated in the 3-5 pH range. Above pH 5, and in subsoil samples, Zn was adsorbed by electrostatic mechanisms, since ionic strength effect was observed. Despite depth and ionic strength effects, Zn adsorption depends mainly on the pH.

Membranas Inorgânicas e reatores catalíticos

Membrane reactors are reviewed with emphasis in their applications in catalysis field. The basic principles of these systems are presented as well as a historical development. The several kinds of catalytic membranes and their preparations are discussed including the problems, needs and challenges to be solved in order to use these reactors in commercial processes. Some applications of inorganic membrane reactors are also shown. It was concluded that these systems have a great potential for improving yield and selectivity of high temperature catalytic reactions. However, it is still an imerging technology with a need for a lot of fundamental research; several challenges should be overcome for the successful commercial application of these systems.

A contaminação dos oceanos por radionuclídeos antropogênicos

Several hundreds of artificial radionuclides are produced as the result of human activities, such as the applications of nuclear reactors and particle accelerators, testing of nuclear weapons and nuclear accidents. Many of these radionuclides are short-lived and decay quickly after their production, but some of them are longer-lived and are released into the environment. From the radiological point of view the most important radionuclides are cesium-137, strontium-90 and plutonium-239, due to their chemical and nuclear characteristics. The two first radioisotopes present long half life (30 and 28 years), high fission yields and chemical behaviour similar to potassium and calcium, respectively. No stable element exists for plutonium-239, that presents high radiotoxicity, long half-life (24000 years) and some marine organisms accumulate plutonium at high levels. The radionuclides introduced into marine environment undergo various physical, chemical and biological processes taking place in the sea. These processes may be due to physical dispersion or complicated chemical and biological interactions of the radionuclides with inorganic and organic suspend matter, variety of living organisms, bottom sediments, etc. The behaviour of radionuclides in the sea depends primarily on their chemical properties, but it may also be influenced by properties of interacting matrices and other environmental factors. The major route of radiation exposure of man to artificial radionuclides occuring in the marine environment is through ingestion of radiologically contamined marine organisms. This paper summarizes the main sources of contamination in the marine environment and presents an overview covering the oceanic distribution of anthropogenic radionuclides in the FAO regions. A great number of measurements of artificial radionuclides have been carried out on various marine environmental samples in different oceans over the world, being cesium-137 the most widely measured radionuclide. Radionuclide concentrations vary from region to region, according to the specific sources of contamination. In some regions, such as the Irish Sea, the Baltic Sea and the Black Sea, the concentrations depend on the inputs due to discharges from reprocessing facilities and from Chernobyl accident. In Brazil, the artificial radioactivity is low and corresponds to typical deposition values due to fallout for the Southern Hemisphere.

Propulsor pneumático versátil e isento de pulsação para sistemas de análise em fluxo

Aquarium air pumps are proposed and evaluated as pneumatic liquid propulsion devices for flow injection and continuos flow analysis (FIA and CFA) systems. This kind of pump is widely available at a very low cost and it can sustain a pressure around of 4 psi (0.28 bar) indefinitely. By applying this air pressure onto a solution contained in a reservoir flask, it is possible to reach flow rates of up to 12.5 mL min-1 for circuits comprising reactors, made from 0.8 i.d. tubing with a length of 100 cm. The precise adjustment of flow rate below the maximum one can be made with a simplified needle valve or inserting in series a short length of capillary tube. The absence of flow pulsation is a definite advantage in comparison with peristaltic pumps, especially when amperometric detection is elected, as confirmed experimentally in FIA and CF applications.

Determinação espectrofotométrica por injeção em fluxo de paracetamol (acetaminofeno) em formulações farmacêuticas

A flow injection spectrophotometric procedure is proposed for the determination of paracetamol (acetaminophen) in pharmaceutical formulations. Powdered and liquid samples were previously dissolved/diluted in 0.05 mol L-1 hydrochloric acid solution and a volume of 250 µL was injected directly into a carrier stream of this same acid solution, flowing at 2.5 mL min-1. Paracetamol reacts with sodium hypochlorite forming N-acetyl-p-benzoquinoneimine which then reacts with sodium salicylate in sodium hydroxide solution yielding a blue indophenol dye which was measured at 640 nm in the pH range of 9.5-10.0. Paracetamol was determined in pharmaceutical products in the 1.0 to 100.0 mg L-1 (3.3x10-6 a 6.6x10-4 mol L-1) concentration range, with a detection limit of 0.5 mg L-1 (1.6x10-6 mol L-1). The recovery of this analyte in five samples ranged from 98.0 to 103.6 %. The analytical frequency was 80 determinations per hour and the RSDs were less than 1% for paracetamol concentrations of 25.0, 50.0 and 75.0 mg L-1 (n=10). A paired t-test showed that all results obtained for paracetamol in commercial formulations using the proposed flow injection procedure and a spectrophotometric batch procedure agree at the 95% confidence level.

Microondas em síntese orgânica

The application of microwave heating to organic synthesis is presented in a concise manner. Issues such as the history of the microwave oven, dielectric heating, reactions techniques (dry reactions, MORE chemistry), domestic ovens, microwave reactors, microwave effect and control of selectivities are discussed. Selected examples from the literature showed faster reactions, improved yields, less thermal degradations and cleaner reactions.

A geração química de vapor em espectrometria atômica

The historical development of atomic spectrometry techniques based on chemical vapor generation by both batch and flow injection sampling formats is presented. Detection via atomic absorption spectrometry (AAS), microwave induced plasma optical emission spectrometry (MIP-OES), inductively coupled plasma optical emission spectrometry (ICP-OES) , inductively coupled plasma mass spectrometry (ICP-MS) and furnace atomic nonthermal excitation spectrometry (FANES) are considered. Hydride generation is separately considered in contrast to other methods of generation of volatile derivatives. Hg ¾ CVAAS (cold vapor atomic absorption spectrometry) is not considered here. The current state-of-the-art, including extension, advantages and limitations of this approach is discussed.

Efeito do polietilenoglicol e da albumina na imobilização de lipase microbiana e na catálise em meio orgânico

Poly (ethylene) glycol (PEG) and bovine serum albumin (BSA), as additive agents, were used to enhance the activity of immobilized microbial lipase in organic solvent. Controlled pore silica (CPS) was selected as matrix and different immobilization procedures were evaluated: directly lipase binding on CPS and simultaneous addition of lipase and additive agent on the same support. The highest coupling yield (59.6%) was attained when the immobilization procedure was performed at lipase loading of 150 U/g support in the presence of PEG-1.500. This immobilized system was used in esterification reactions under repeated batch cycles and the biocatalyst half-life was found to increase 2.7 times when compared with the control.