Forest biomass and wood consumption In the lower course of the Amazon: a case study of rhe Urubueua Island

Várzea and terra-firme forests in the lower course of the Amazon were compared in terms of forest structure, wood volume increments and forest biomass. The wood volume of várzea forests was smaller than that of terra-firme forests, particularly when severe human intervention such as the cultivation of açaí palm occurred. The difference was even greater in the forest weight comparison because of the lower wood density of várzea trees. These trees are not directly influenced by water stress during the dry season, while late wood with a high density is formed in the terra-firme trees. The annual forest disappearance area due to firewood for tile factories was estimated to be about 276 ha on the island investigated, which had an area of 36,200 ha. Assuming that the forests are rotatively cultivated every 25 to 30 years, the total deforestation area is 6,870-6,948 ha in 25 years and 8,244~8,337 ha in 30 years. This result means that the balance between forest biomass and utilization is not in crisis, however, this balance might be lost as long as substitutive energy such as electricity is not supplied.

Wood density of trees in black water floodplains of Rio Jaú National Park, Amazonia, Brazil

The Jaú National Park is the largest protected forested area in the world. The Vitória Amazônica Foundation is working towards understanding its ecosystem, to which this paper contributes. Wood density was analysed in 27 common tree species growing in the blackwater flood-plains of the Rio Jaú, an affluent of the Rio Negro (Amazonia, Brazil). Wood was sampled with an increment borer. Mean wood density of the analysed species ranged from 0.35 to 0.87 g cm-3. The mean of all sampled species was 0.67 g cm-3 (st. dev. 0.13). Lowest density was found for Hevea spruceana with 0.32 g cm-3 and highest for Crudia amazonica with 0.9 g cm-3.

Wood specific gravity of trees and forest types in the southern Peruvian Amazon

Estimates of terrestrial biomass depend critically on reliable information about the specific gravity of the wood of forest trees. The study reported on here was carried out in the southern Peruvian Amazon and involved collection of wood samples from trees (70 spp.) in intact forest stands. Results demonstrate the high degree of variability in specific gravity (ovendry weight/green volume) in trees at single locations. Three forest types (swamp, high terrace forest with alluvial soil, and sandy-soil forest) had values close to the average reported for tropical forest woods (.69). Two early successional forest types, which make up as much as 12% of the total vegetated area in this part of the Amazon, had values significantly lower (.40). An increase in specific gravity with increasing age of the tree, which has been reported in some spe cies of tropical-forest woods, is seen in a positive relationship between specific gravity and di ameter for a species prevalent in one plot. Increases in specific gravity with tree and forest age may be significant in estimating changes in carbon stores over time.

Germinação de sementes e sobrevivência de plântulas de Himatanthus sucuuba (Spruce) Wood. em resposta ao alagamento, nas várzeas da Amazônia Central

Himatanthus sucuuba é uma espécie que coloniza as várzeas na Amazônia Central. O objetivo desse trabalho foi estudar as estratégias de adaptação da planta ao alagamento prolongado dessas áreas. Para tanto, foram acompanhados a germinação das sementes e o desenvolvimento das plântulas, simulando as condições naturais de campo (seca e alagamento). A germinação foi realizada em dois substratos: areia+serragem (não-alagado), e em água (alagado). Durante 120 dias, as plântulas geradas foram submetidas a três tratamentos: controle (irrigação diária), submersão parcial (sistema radicular) e submersão total. Foram analisadas as alterações na morfologia das plântulas, na anatomia das raízes e a atividade da enzima álcool desidrogenase (ADH), nos tempos: 0, 15, 30, 60, 90 e 120 dias. Foi constatado que a espécie apresenta elevada taxa de germinação e produção de plântulas, ambas acima de 80%, mesmo para sementes em água. Sob submersão parcial foram formadas lenticelas hipertrofiadas, raízes adventícias e aerênquima radicular. A atividade da ADH se manteve elevada até o 60º dia, com decréscimo após esse período. Plântulas sob submersão total perderam as folhas, não formaram raízes adventícias ou lenticelas, mas desenvolveram aerênquima. Estas plântulas apresentaram os maiores valores da ADH, que permaneceram altos até o término do experimento, indicando o desvio do metabolismo anaeróbico para produção de etanol como principal via para a manutenção da carga energética. Apesar de ter ocorrido a morte de algumas plântulas no tratamento de submersão total, o percentual de sobreviventes foi alto com 70% ao final dos 120 dias de duração do período experimental. Desta maneira, as plântulas de H. sucuuba modulam morfo-fisiologicamente a tolerância ao alagamento em função do tempo de exposição ao estresse e altura da coluna de água.

Sistema reprodutivo e polinização de Lepidagathis sessilifolia (Pohl) Kameyama ex Wassh. & J.R.I. Wood (Acanthaceae), em remanescente florestal da região sudoeste de Mato Grosso, Brasil

O gênero Lepidagathis apresenta distribuição pantropical com cerca de 100 espécies. No Brasil ocorrem 16 espécies, a maioria nas regiões Centro - Oeste e Sudeste. O estudo foi realizado em sub - bosque de remanescente florestal do município de Tangará da Serra - MT e teve como objetivo analisar a fenologia de floração, descrever a morfologia e biologia floral, verificar os visitantes florais e avaliar o sistema e o sucesso reprodutivo por meio de polinizações manuais. Lepidagathis sessilifolia apresenta inflorescências espiciformes, terminais, com cálice de cor rósea vistosa e corola de coloração branco-rósea. A floração ficou restrita aos meses de março a abril, durante a estação chuvosa. A senescência floral ocorreu após 24 ou 48 horas. A viabilidade dos grãos de pólen foi elevada (92,5%). O único polinizador observado visitando as flores de L. sessilifolia foi a abelha Partamona nhambiquara (Apidae - Meliponini). O sistema reprodutivo misto da espécie é caracterizado pela formação de frutos por meio de agamospermia, autopolinização e polinização cruzada. Esse sistema reprodutivo flexível é vantajoso, pois, garante a manutenção da espécie na área de estudo mesmo na ausência de polinizadores.

Rotary peeling yield of Schizolobium amazonicum (Leguminosae - Caesalpinioideae)

The tropical tree Schizolobium amazonicum is native from the Amazonian forest, naturally occurring in Brazil, Peru and Colombia. This work aimed to study the veneer yield made from this species. For this purpose, 50 logs from S. amazonicum were rotary peeled in a plywood industry installed in Brazilian Amazon region. The results indicated that S. amazonicum had a peeling yield similar or even higher than those usually obtained for species traditionally used for this purpose in Brazil, like those of Pinus and Eucalyptus. It was also observed that the dendrometric parameters of the log can be used to estimate the peeling yield in this species.

Anatomical and energy characteristics of charcoal made from five species

Charcoal is an important energy raw material and its properties are influenced by the wood's anatomical and chemical composition and the production process. The aim of this study was to evaluate the anatomical characteristics, calorific power and volatiles and ash content of carbonized wood from Byrsonima spicata, Calophyllum brasiliense, Cecropia sciadophylla, Cochlospermum orinocense and Schefflera morototoni. The calorific power varied from 26,878 to 31,117 kJ kg-1; the content of volatile materials ranged from 20.9 to 31.7%; ash content ranged from 0.1 to 3.8%; and carbon content varied from 68.2 to 75.3%. Anatomical structures of charcoal can be used for species identification. The studied species are not indicated for charcoal production because the levels of ash and volatile compounds are higher than those recommended for charcoal produced for household use. In addition, the calorific power and level of carbon content are insufficient for use in the steel industry.

A maturação do abacaxi

In the present work it was sougth to correlate the coloration of the fruit of Ananas comosus variety Perola with the pulp quality, aiming at the orientation of the fruit grower to the correct time of harvest. Pineapple fruit was chosen in 5 stages of maturation recognized by its external characteristics, principally its color. The fruits of each stage of maturation were analysed, determining the. weight, the percentage of soluble solids, and relation of acid to soluble solids. At the same time a test was made classifying the fruits as acid, regular, good, excellent, and spoiled. A correlation was found between the external coloration of the fruit and the degree of maturation. Concluding from this that the best time to harvest the variety Perola is in the third stage in the regions closest to the market and in the second stage in the regions which are farther away. For the cannery industry the fruit should be harvest in the first stage.

Opportunities and constraints in schistosomiasis vaccine development: infection characteristics and industry realities

The notes provided in this article relate to two components of the development of vaccines against schistosomiasis: (1) The characteristics of schistosome infections (eg. features of the schistosome life cycle), and the parasite itself, that have implications for vaccination strategies; (2) The characteristics of the biopharmaceutical industry that have implications for product development. As will be seen, these two topic areas are not vastly disparate.

Techniques for the detection of pathogenic Cryptococcus species in wood decay substrata and the evaluation of viability in stored samples

In this study, we evaluated several techniques for the detection of the yeast form of Cryptococcus in decaying wood and measured the viability of these fungi in environmental samples stored in the laboratory. Samples were collected from a tree known to be positive for Cryptococcus and were each inoculated on 10 Niger seed agar (NSA) plates. The conventional technique (CT) yielded a greater number of positive samples and indicated a higher fungal density [in colony forming units per gram of wood (CFU.g-1)] compared to the humid swab technique (ST). However, the difference in positive and false negative results between the CT-ST was not significant. The threshold of detection for the CT was 0.05.10³ CFU.g-1, while the threshold for the ST was greater than 0.1.10³ CFU-1. No colonies were recovered using the dry swab technique. We also determined the viability of Cryptococcus in wood samples stored for 45 days at 25ºC using the CT and ST and found that samples not only continued to yield a positive response, but also exhibited an increase in CFU.g-1, suggesting that Cryptococcus is able to grow in stored environmental samples. The ST.1, in which samples collected with swabs were immediately plated on NSA medium, was more efficient and less laborious than either the CT or ST and required approximately 10 min to perform; however, additional studies are needed to validate this technique.

From print to screen: changes and challenges facing the Brazilian publishing industry

The publishing industry is at a turning point. Facing the first major disruptive innovation in five centuries, its long-established structure and business model are at stake. Building on literature based on the pitfalls for incumbents, we interviewed key executives from the major publishers in Brazil to understand their perspective. We find that not only are they facing those pitfalls, but we also propose a new one, The Industry View Trap, concerning challenges created by convergence, the difficulty to deal with changes in the ecosystem and the fact that the very definition of the industry you're part of might have changed.

Potential use of a chemical leaching reject from a kaolin industry as agricultural fertilizer

The industrial refining of kaolin involves the removal of iron oxides and hydroxides along with other impurities that cause discoloration of the final product and depreciate its commercial value, particularly undesirable if destined to the paper industry. The chemical leaching in the industrial processing requires treatments with sodium hyposulfite, metallic zinc, or sulfuric and phosphoric acids, in order to reduce, dissolve and remove ferruginous compounds. To mitigate the environmental impact, the acidic effluent from the leaching process must be neutralized, usually with calcium oxide. The resulting solid residue contains phosphorous, zinc, and calcium, among other essential nutrients for plant growth, suggesting its use as a macro and micronutrient source. Samples of such a solid industrial residue were used here to evaluate their potential as soil fertilizer in an incubation greenhouse experiment with two soil samples (clayey and medium-textured). The small pH shift generated by applying the residue to the soil was not a limiting factor for its use in agriculture. The evolution of the concentrations of exchangeable calcium, and phosphorous and zinc extractability by Mehlich-1 extractant during the incubation period confirms the potential use of this industrial residue as agricultural fertilizer.

Chemical properties of soils treated with biological sludge from gelatin industry

The impact of agro-industrial organic wastes in the environment can be reduced when used in agriculture. From the standpoint of soil fertility, residue applications can increase the organic matter content and provide nutrients for plants. This study evaluated the effect of biological sludge from gelatin industry on the chemical properties of two Ultisols (loamy sand and sandy clay) and an Oxisol (clay). The experiment lasted 120 days and was carried out in laboratory in a completely randomized design with factorial arrangement, combining the three soils and six biological sludge rates (0, 100, 200, 300, 400, and 500 m³ ha-1), with three replications. Biological sludge rates of up to 500 m³ ha-1 decreased soil acidity and increased the effective cation exchange capacity (CEC) and N, Ca, Mg, and P availability, without exceeding the tolerance limit for Na. The increase in exchangeable base content, greater than the effective CEC, indicates that the major part of cations added by the sludge remains in solution and can be lost by leaching.

Organic matter quality and dynamics in tropical soils amended with sugar industry residue

Soil organic matter depletion caused by agricultural management systems have been identified as a critical problem in most tropical soils. The application of organic residues from agro-industrial activities can ameliorate this problem by increasing soil organic matter quality and quantity. Humic substances play an important role in soil conservation but the dynamics of their transformations is still poorly understood. This study evaluated the effect of compost application to two contrasting tropical soils (Inceptisol and Oxisol) for two years. Soil samples were incubated with compost consisting of sugarcane filter cake, a residue from the sugar industry, at 0, 40, 80, and 120 Mg ha-1. Filter cake compost changed the humic matter dynamics in both content and quality, affecting the soil mineralogical composition. It was observed that carbon mineralization was faster in the illite-containing Inceptisol, whereas humic acids were preserved for a longer period in the Oxisol. In both soils, compost application increased fulvic acid contents, favoring the formation of small hydrophilic molecules. A decrease in fluorescence intensity according to the incubation time was observed in the humic acids extracted from amended soils, revealing important chemical changes in this otherwise stable C pool.

Sustainability of Wood Productivity of Pinus TaedaBased on Nutrient Export and Stocks in the Biomass and in the Soil

ABSTRACT The impact of intensive management practices on the sustainability of forest production depends on maintenance of soil fertility. The contribution of forest residues and nutrient cycling in this process is critical. A 16-year-old stand of Pinus taeda in a Cambissolo Húmico Alumínico léptico (Humic Endo-lithic Dystrudept) in the south of Brazil was studied. A total of 10 trees were sampled distributed in five diameter classes according to diameter at breast height. The biomass of the needles, twigs, bark, wood, and roots was measured for each tree. In addition to plant biomass, accumulated plant litter was sampled, and soil samples were taken at three increments based on sampling depth: 0.00-0.20, 0.20-0.40, 0.40-0.60, 0.60-1.00, 1.00-1.40, 1.40-1.80, and 1.80-1.90 m. The quantity and concentration of nutrients, as well as mineralogical characteristics, were determined for each soil sample. Three scenarios of harvesting intensities were simulated: wood removal (A), wood and bark removal (B), and wood + bark + canopy removal (C). The sum of all biomass components was 313 Mg ha-1.The stocks of nutrients in the trees decreased in the order N>Ca>K>S>Mg>P. The mineralogy of the Cambissolo Húmico Alumínico léptico showed the predominance of quartz sand and small traces of vermiculite in the silt fraction. Clay is the main fraction that contributes to soil weathering, due to the transformation of illite-vermiculite, releasing K. The depletion of nutrients from the soil biomass was in the order: P>S>N>K>Mg>Ca. Phosphorus and S were the most limiting in scenario A due to their low stock in the soil. In scenario B, the number of forest rotations was limited by N, K, and S. Scenario C showed the greatest reduction in productivity, allowing only two rotations before P limitation. It is therefore apparent that there may be a difference of up to 30 years in the capacity of the soil to support a scenario such as A, with a low nutrient removal, compared to scenario C, with a high nutrient removal. Hence, the effect of different harvesting intensities on nutrient availability may jeopardize the sustainability of P. taeda in the short-term.