Seed germination of a rare neotropical canopy tree dormancy and the effects of abiotic factors

The purpose of this study was to examine if germination is a critical phase on Enterolobium glaziovii regeneration. Hence, the germinative response of E. glaziovii seeds was investigated in relation to some of the main environmental factors (temperature, light and water stress) to which its seeds are subjected in the forest, as well as its dormancy and the longevity of its burial seeds. According to our results, its seeds may be regarded as photoblastic neutral. They do not need alternating temperatures to germinate and can germinate under a broad range of water stress. However, only about 10% of E. glaziovii seeds remain viable after one year. In other words, the annual fruiting, instead seed longevity, seems to maintain the long-term seed availability of this species. Consequently, the seed longevity could be a critical phase of E. glaziovii germination.

Root system distribution of sugarcane irrigated with domestic sewage effluent aplication by subsurface drip system

Irrigation with domestic sewage effluent (DSE) has been recommended by subsurface dripping, as it can obtain a high rate of irrigation efficiency and faster use of salts in comparison with other irrigation methods. The study aimed at evaluating the area, the length and the effective depth of the root system of sugarcane irrigated with DSE by subsurface drip system and with different irrigation rates at depths of 0.00-0.20, 0.20-0.40, 0.40-0.60 and 0.60-0.80m. The experiment was carried out in the municipality of Piracicaba, in the state of São Paulo (SP), Brazil, in a sugarcane area irrigated with DSE in a completely randomized blocks set up in furrows, with three replications and four treatments, which are: one area without irrigation (AWI) and three irrigated areas meeting 50% (T50%), 100% (T100%) and 200% (T200%) of the crop's water need between each round of irrigation. T100% and T200% provided smaller areas and lengths of roots in the two deepest layers, as compared to AWI and T50%, which stimulated the development of deeper roots due to the water stress. TWI, T100% and T200% presented 80% of the roots up to a depth of 0.40m and T50% treatment presented 76.43% of roots total.

Ratoon sugarcane yield integrated drip-irrigation and nitrogen fertilization

The aim of this study was to compare the use of water and nitrogen on ratoon sugarcane during irrigated and rain-fed conditions, and to assess the production potential of stalks and sugar with different rates of N-fertilizer on the subsurface drip-irrigated management. The experimental design was a randomized block with four replications for each experiment and treatments: (T1) irrigated, 0kg N ha-1; (T2) irrigated, 70kg N ha-1; (T3) irrigated, 140kg N ha-1; (T4) irrigated, 210kg N ha-1; (T5) not irrigated, 0kg N ha-1, and (T6) not irrigated, 140kg N ha-1. Biometric, technological, dry matter and yield variables were analyzed among the treatments. The irrigation system together with the application of N-fertilizer at 140kg ha-1 presented significant differences in dry matter accumulation of shoots, and for the production of stalks and sugar, respectively 94, 105 and 106%, higher when compared to the not irrigated, without N-fertilizer (T5). There was a positive and synergistic effect of irrigation with N-fertilizer on the productivity of stalks and sugar. Ratoon sugarcane irrigated with subsurface dripping had the highest yield (22Mg ha-1 of sugar) with the dosage of 140kg ha-1 N.

Deficit irrigation in grapevine cv. Syrah during two growing seasons in the brazilian semiarid

Irrigation plays an important role for grape’s yield as well as on its quality for winemaking. Thus, the effects of deficit irrigation strategies on yield and quality of wine grapes cv. Syrah were evaluated in Petrolina, State of Pernambuco, Brazil. Evaluations were carried out throughout the second and third growing seasons, which were from November 2010 to February 2011 (rainy season) and from May to September 2011 (dry season), respectively. Vines were drip irrigated and the experimental design was completely randomized with three treatments and four replications. The treatments were full irrigation (FI), performed according crop evapotranspiration; regulated deficit irrigation (RDI), in which irrigation was interrupted in phenological growth stage of bunch closure, but was occasionally performed according soil water monitoring of the root zone; and deficit irrigation (DI), when irrigation was interrupted from bunch closure to harvesting. Differences on leaf water content among treatments were observed in both growing seasons and RDI and DI treatment plants presented moderate water stress. The number of bunches did not differ among treatments in both growing seasons; however, bunch weight per plant, average bunch weight and soluble solid content were higher in FI treatment during the dry season. Deficit irrigation strategies promoted water saving.

Influence of environmental factors on seed germination and seedling emergence of yellow sweet clover (Melilotus officinalis)

Laboratory and greenhouse experiments were conducted to determine the effects of drought and salinity stress, temperature, pH and planting depth on yellow sweet clover (Melilotus officinalis) germination and emergence. Base, optimum and ceiling germination temperatures were estimated as 0, 18.47 and 34.60 ºC, respectively. Seed germination was sensitive to drought stress and completely inhibited at a potential of -1 MPa, but it was tolerant to salinity. Salinity stress up to 90 mM had no effect over the M. officinalis seed germination, but the germination decreased by increasing the salt concentration. The drought and salinity required for 50% inhibition of maximum germination were 207 mM and -0.49 MPa, respectively. High percentage of seed germination (>92%) was observed at pH = 5-6 and decreased to 80% at acidic medium (pH 4) and to 42% at alkaline medium (pH 9) pH. Maximum seedling emergence occurred when the seeds were placed at 2 cm depth and decreased when increasing the depth of planting; no seed emerged from depths of 10 cm.

Effects of early compost application on no-till organic soybean

Weed control has always been an important issue in agriculture. With the advent of no-till systems, soil erosion was reduced but herbicide use was increased. Organic no-till systems try to adjust reduced erosion to the no use of herbicides. Nevertheless, this adjustment is limited by the cost of mechanical weed control. This cost may be reduced by improved cultural weed control with cover crops mulches. In this paper we report a study on the application of compost manure on an oats winter cover crop, preceding soybean, instead of on the soybean summer crop. Treatments comprised a control without compost manure, and compost manure doses of 4 and 8 Mg ha-1 applied either on oats in winter or soybean in summer, organized in a randomized block design, with five replications. In summer, plots were split into weed-controlled or not controlled subplots. The timing of application and the manure doses did not affect the oats biomass or the soybean performance. However, in summer, without water stress, the application of manure at 8 Mg ha-1 directly on soybean has reduced weed biomass in this crop.

Germination ecology of wild onion: a rainfed crop weed

Asphodelus tenuifolius is becoming a more common weed in rain-fed area in Pakistan. Laboratory and greenhouse experiments were conducted to determine the effect of different environmental factors on germination and emergence of A.tenuifolius. Results showed that A.tenuifolius can tolerate a wide range of varying environmental factors. Greatest percentage of germination (80%) was recorded at 15 ºC constant temperature; however, considerable germination occurred at 20 and 25 ºC. Light for 10 h photoperiod stimulate germination of Asphodelus tenuifolius compared with complete darkness. Germination was totally inhibited at osmotic stress higher than -0.8 MPa. There was no significant difference in germination at pH 6 to 8; however, there was a slightly decrease at pH 9, compared with distilled water. Asphodelus tenuifolius was very sensitive to salinity; however, a few seeds of A.tenuifolius were able to germinate even at 150 mM NaCl concentration. Greatest emergence occurred with seed placed at soil surface and emergence decreased with increase in burial depth. No emergence occurred from 4 cm or greater. This information may aid in developing tools and strategies for management.

Efeitos da deficiência de água em plantas de Euterpe oleracea (açaí)

A resistência de plantas jovens de açaí (Euterpe oleracea Mart.) à deficiência de água foi determinada em plantas de quatro meses de idade cultivadas em sacos plásticos perfurados contendo 7 kg de terra. O experimento foi conduzido em casa de vegetação e a irrigação foi suspensa até as plantas atingirem fotossíntese zero, quando, então, foram reidratadas. Durante este período foram feitas medidas diárias da fotossíntese líquida, condutância estomática e transpiração. Pequenas reduções na condutância estomática, transpiração e fotossíntese foram observadas a partir do décimo dia e se acentuaram com o tempo. A taxa de fotossíntese reduziu-se à metade da fotossíntese máxima quando o potencial de água atingiu -1,9 MPa. O estresse hídrico atingiu nível suficientemente severo para induzir uma fotossíntese nula após 61 dias sem irrigação, com um potencial de água médio foliar de -2,5 MPa. A recuperação da fotossíntese, condutância estomática e transpiração iniciaram-se um dia após a irrigação, atingindo valores semelhantes ao do controle após 14 dias de reidratação. A análise das curvas de pressão e volume mostrou que a deficiência de água diminuiu o potencial osmótico, resultando em um ajustamento osmótico de 0,29 MPa na turgescência zero e 0,36 MPa na turgescência máxima. Isto indica que essa espécie possui mecanismos de adaptação a um estresse hídrico moderado.

Alteração no potencial osmótico e teor de carboidratos solúveis em plantas jovens de lobeira (Solanum lycocarpum St.-Hil.) em resposta ao estresse hídrico

Solanum lycocarpum é uma espécie típica da vegetação do cerrado brasileiro e tem demonstrado resistência à seca que ocorre em seu ambiente. O ajustamento osmótico é um decréscimo do potencial osmótico causado pelo acúmulo de solutos nas células, o qual mantém o gradiente de potencial hídrico e, ao mesmo tempo, a turgescência necessária ao crescimento celular. A influência do estresse hídrico no potencial osmótico e no teor de carboidratos solúveis foi investigada neste trabalho. A análise dos resultados mostrou que as plantas de Solanum lycocarpum apresentaram redução significativa nos valores de potencial osmótico em resposta ao estresse hídrico. O aumento no teor de carboidratos solúveis foi verificado em plantas sob condições estressantes em casa de vegetação, em particular o de carboidratos redutores. Os resultados obtidos sugerem que esta espécie apresenta mecanismo de ajustamento osmótico, nas condições de estresse hídrico, adaptando-a à sobrevivência nessa condição.

Leaf anatomy variation within and between three "restinga" populations of Erythroxylum ovalifolium Peyr: (Erythroxylaceae) in Southeast Brazil

Erythroxylum ovalifolium is a woody shrub widespread in the "restinga", i.e. the open scrub vegetation of the Brazilian coastal sandy plains. We examined leaf anatomy variation of this species both within populations and between populations of three "restingas" in the state of Rio de Janeiro. Sites were ca.100 km far from each other and differed in regard to rainfall and vegetation structure: a dry, open site; a wet, dense site and an intermediate one. Microhabitats within sites were: (i) exposed to full irradiance, outside vegetation islands; (ii) partially exposed to full irradiance, at the border of vegetation islands; (iii) shaded, inside vegetation islands. Leaf anatomy parameters were measured for five leaves collected in each of five plants per microhabitat, in each population; they were thickness of the leaf blade, of the palisade and spongy parenchyma, and of the adaxial and abaxial epidermis. Leaves from the dry, open site had narrower abaxial epidermis and a smaller contribution of spongy parenchyma to total leaf blade thickeness than the other two sites, which we attributed to water stress. Adaxial epidermis and leaf are thicker in more exposed microhabitats (i and ii, above), irrespective of site. We proposed that between-site anatomical variation in traits related to water stress, and within-site anatomical variation in traits related to light-use are indicative of ecological plasticity and might help explain the high abundance of E. ovalifolium in the studied populations and along the State of Rio de Janeiro coast.

Some functional characteristics of extruded blends of fiber from sugarcane bagasse, whey protein concentrate, and corn starch

Blends of fiber from sugar cane bagasse, corn starch, and whey protein concentrate were extruded. A single screw extruder, equipped with a screw at a constant compression ratio of 1:1 and a die diameter of 3 mm, was used. The best processing conditions were determined according to a central composite rotatable design (α = 1.41) with 5 central points, which gives a total of 13 tests. During the extrusion process the content of insoluble fiber decreased and that of soluble fiber increased. An increase in the contents of fiber and in the barrel temperature resulted in a decrease in the expansion index values and an increase in the water absorption index values; whereas in blends with intermediate fiber contents the effects in these parameters were found to be the opposite. High fiber contents increased penetration force but decreased luminosity, water solubility index values and the adhesive force in gels. The extrusion process improved the functional properties of sugarcane fiber bagasse enabling its addition to diverse alimentary systems.

Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks

Given the broad acceptance of sour cassava starch biscuits in Brazil and the nutritional quality of quinoa flour, this study aimed to evaluate the effect of extrusion temperature, screw speed, moisture, and amount of quinoa flour on the physical properties of puffed snacks. Extrusion process was carried out using a single-screw extruder in a factorial central composite design with four factors. Effects of moisture and amount of quinoa flour on the expansion index and specific volume of snacks were observed. There was a pronounced increase in water solubility index of blends with the extrusion process with significant effects of all process parameters on the WSI. Higher water absorption index (WAI) was observed under high temperature, low moisture, and lower quinoa flour amount. Temperature and amount of quinoa flour influenced the color of the snacks. A positive quadratic effect of quinoa flour on hardness of products was observed. Blends of sour cassava starch and quinoa flour have good potential for use as raw material in production of extruded snacks with good physical properties.

Technological properties of precooked flour containing coffee powder and rice by thermoplastic extrusion

Although Brazil is a country of tradition in both the production and consumption of coffee, the most of the coffee is consumed as a beverage, which reduces greatly the competitiveness on international market, for reducing the chances of supplying the product under other forms of consumption. Owing to that, the aim of this study was developing a precooked mixed flour containing coffee powder and rice for use in coffee flavored products. Mixtures of rice and coffee in the proportions of 900:100, 850:150 and 800:200 g, respectively, were processed in a single screw extruder (Brabender DS-20, Duisburg, German) and the effect of the extrusion process on the variables moisture content (16%, 18% and 20%) and temperature in the third extruding zone (140 °C, 160 °C and 180 °C) was studied. The results for expansion index ranged from 2.91 to 11.11 mm in diameter; the water absorption index from 4.59 to 6.33 g gel/g sample and the water solubility index varied from 4.05% to 8.57%. These results showed that, despite coffee powder influenced the variables studied, the expanded product after milling resulted in a extruded mixture with good absorption and water solubility indices, which favors the use of the precooked mixed flour for human consumption.

Characterization of pre-gelatinized rice and bean flour

The objective of this study was to develop a pre-gelatinized flour using a mixture of broken rice and split beans by thermoplastic extrusion, and to evaluate the physicochemical, nutritional, and technological quality of the final product. The extrusion parameters were maintained using three heating zones with temperatures of 30 ºC, 40 ºC, and 70 ºC; screw speed of 177 rpm; feed rate of 257 g/m, and circular matrix of 3.85 mm. The following characterization analyses were performed: physicochemical, nutritional, water absorption index (WAI), water solubility index (WSI), and paste viscosity. The pre-gelatinized rice and bean flour had an intermediate value of WAI, 7.51 g/g, and high WSI value, 24.61%. Regarding proteins, it was verified an average content of 12.9% in the final product. The amino acid contents found in the pre-gelatinized flour indicate that the mixture has the essential amino acids. It was also found that the pre-gelatinized flour supplies more than 60% of the essential amino acids recommended for children aged one to three years old. The gelatinized flour composed of broken rice and split beans is an alternative to the use of these by-products of the manufacture process of rice and beans to obtain a product with viable technological characteristics and high nutritional value.

Effects of processing on physical properties of extruded snacks with blends of sour cassava starch and flaxseed flour

The opportunity to supplement common cassava biscuits with a product of higher nutritional value meets consumer expectations. In this work it was studied the effects of process parameters and flaxseed addition on physical properties of expanded snacks. Extrusion process was carried out using a single screw extruder in a factorial central composite rotatable design with four factors: flaxseed flour percentage (0-20%), moisture (12-20%), extrusion temperature (90-130 °C) and screw speed (190-270). The effect of extrusion variables was investigated in terms of expansion index, specific volume, water absorption index, water solubility index, color parameters (L*, a* ,b*) and hardness. The data analysis showed that variable parameters of the extrusion process and flaxseed flour affected physical properties of puffed snacks. Among the experimental conditions used in the present study, expanded snack products with good physical properties can be obtained under the conditions of 10% flaxseed flour, 230 rpm screw speed, temperature of 90 °C and moisture of 12%.