Sensory and physico-chemical characteristics of desserts prepared with egg products processed by freeze and spray drying

In this work, three freeze-dried (FD) egg products (whole egg (WE), egg yolk (EY) and egg white (EW)) were obtained and the acceptability of confections prepared with each was evaluated. Sensory analyses for confections were performed by hedonic testing with fifty panelists in each evaluation. The studied confections were: Condensed Milk Pudding (P), Quindim (Q) and Meringue (M). The results obtained for confections made with FD egg products were compared with the achieved through other formulations of the same desserts made with fresh (F) or spray-dried (SD) egg products. The sensory analysis results for confections made with FD egg products showed good acceptance by panelists. A principal component analysis of the sensory evaluation data was carried out to identify similarities between the different egg products. The PCA supported the conclusion that FD egg products can substitute their fresh and SD counterparts in dessert formulations with good acceptability while keeping the advantages conferred by the freeze-drying method.

Characterization of new sources of derivative starches as wall materials of essential oil by spray drying

Starch derivatives of taro (Colocasia esculenta L. Schott) and rice were characterized as wall materials of orange oil (d-limonene) by spray drying. Native starches were initially hydrolyzed with HCl and then esterified. Succinylated starches were modified using a conventional method in a slurry and were extruded; whereas, the phosphorylated starches were modified using the extrusion process. Viscosity and solubility of starches reduced after acid hydrolysis, derivatization, and extrusion. The particle size of the wall materials ranged between 20.05 and 31.81 µm. The encapsulation efficiency of the phosphorylated taro, rice, and waxy corn starches was 96.9, 96.8 and 97.1% respectively, and 98.6, 98.1, and 98.8% for succynilated taro, rice, and waxy corn starches, respectively. Starch derivatives of taro and rice could potentially be used as wall materials of orange oil d-limonene.

Use of the spray chilling method to deliver hydrophobic components: physical characterization of microparticles

Food industry has been developing products to meet the demands of increasing number of consumers who are concerned with their health and who seek food products that satisfy their needs. Therefore, the development of processed foods that contain functional components has become important for this industry. Microencapsulation can be used to reduce the effects of processing on functional components and preserve their bioactivity. The present study investigated the production of lipid microparticles containing phytosterols by spray chilling. The matrices comprised mixtures of stearic acid and hydrogenated vegetable fat, and the ratio of the matrix components to phytosterols was defined by an experimental design using the mean diameters of the microparticles as the response variable. The melting point of the matrices ranged from 44.5 and 53.4 ºC. The process yield was melting point dependent; the particles that exhibited lower melting point had greater losses than those with higher melting point. The microparticles' mean diameters ranged from 13.8 and 32.2 µm and were influenced by the amount of phytosterols and stearic acid. The microparticles exhibited spherical shape and typical polydispersity of atomized products. From a technological and practical (handling, yield, and agglomeration) points of view, lipid microparticles with higher melting point proved promising as phytosterol carriers.

Influence of spray drying operating conditions on microencapsulated rosemary essential oil properties

Spray drying is an important method used by the food industry in the production of microencapsulated flavors to improve handling and dispersion properties. The objective of this study was to evaluate the influence of the process conditions on the properties of rosemary essential oil microencapsulated by spray drying using gum Arabic as encapsulant. The effects of the wall material concentration (10-30%), inlet air temperature (135-195 ºC), and feed flow rate (0.5-1.0 L.h-1) on the moisture content, hygroscopicity, wettability, solubility, bulk and tapped densities, particle density, flowability, and cohesiveness were evaluated using a 2³ central composite rotational experimental design. Moisture content, hygroscopicity and wettability were significantly affected by the three factors analyzed. Bulk density was positively influenced by the wall material concentration and negatively by the inlet air temperature. Particle density was influenced by the wall material concentration and the inlet air temperature variables, both in a negative manner. As for the solubility, tapped density, flowability, and cohesiveness, the models did not fit the data well. The results indicated that moderate wall material concentration (24%), low inlet air temperature (135 ºC), and moderate feed flow rate (0.7 L.h-1) are the best spray drying conditions.

Study of the physicochemical characteristics of soursop powder obtained by spray-drying

This study aimed at contributing to the development of new foodstuffs made by soursop pulp powder obtained by spraydrying. Different concentrations of maltodextrin DE 20 (15, 30, and 45%) were added to commercial soursop pulp, which was dehydrated afterwards. The following analyses were carried out: water activity, moisture, pH, soluble solids, acidity, ascorbic acid, hygroscopicity, degree of caking, and rehydration time. The results obtained for the three powder treatments (15, 30 and 45% of maltodextrin) were, respectectively: water activity (0.19a±0.00; 0.20a±0.00; 0.18a±0.01); moisture (1.17c±0.12; 1.47b±0.05; 1.82a±0.06); pH (3.75a±0.05; 3.73a±0.06; 3.70a±0.03); soluble solids (89.67a±0.00; 89.84a±0.00; 90.00a±0.06); acidity (3.01a±0.02; 1.91b±0.03; 1.24c±0.03); ascorbic acid (18.90a±0.00; 14.48b±0.00; 11.26b±0.78); hygroscopicity (5.93a±0.40; 3.82b±0.16; 3.28b±0.38); degree of caking (78.36a±2.86; 35.38b±6.07; 24.77b4.89), and rehydration time (02.03a±0.46; 01.16ab±0.50; 0.59b±0.30). The soursop powders with 30 and 45% of maltodextrin had few significant differences in terms of physicochemical and hygroscopic characteristics, which allow us to consider the percentage of 30% of maltodextrin, in this study, as the best percentage for soursop pulp atomization.

The boom and crisis of the Convertibility Plan in Argentina

This article analyses the relationship between state policies and economy in Argentina 1991-2001. In 1991 the currency board regime named 'convertibility' was implemented, within the framework of important neoliberal reforms introduced by the State. These neoliberal reforms facilitated capitalist restructuring, characterized by a leap in productivity, investment and profits. Likewise, these reforms generated imbalances which, along with the changes in the world market conditions from 1998, led to the deepest crisis in Argentina's history. The inefficiency of state neoliberal policies in managing the crisis, based on fiscal adjustment to guarantee the continuity of external financing, led to an economic depression and a financial crash, sparking a mass rebellion and the end of convertibility.

Eficácia da cirurgia endoscópica nasal nos sintomas da rinossinusite crônica associada ou não à polipose

A cirurgia endoscópica nasal atualmente é o tratamento preconizado na rinossinusite crônica. O sucesso no alívio dos sintomas e a melhora da qualidade de vida dos pacientes são os objetivos principais desse estudo. FORMA DE ESTUDO: Estudo de coorte histórico longitudinal. METODOLOGIA: Os pacientes encaminhados ao Hospital das Clínicas-UFPE para tratamento cirúrgico endoscópico de rinossinusite crônica (RSC) responderam questionários durante o ano de 2003-2004. Os sintomas pré e pós-operatórios foram graduados e comparados utilizando uma escala de 5 pontos. RESULTADOS: Foram 24 questionários respondidos. Onze pacientes apresentavam RSC e 13 RSC associada a polipose nasossinusal. A qualidade de vida estava prejudicada em todos os entrevistados, e melhorou consideravelmente em 54,2% dos casos. Todos recomendariam a cirurgia a outras pessoas com problemas nasais semelhantes e apenas 3 pacientes não operariam novamente. Os sintomas com maiores índices de melhora foram: obstrução nasal (83,3%), cacosmia (80%), hiposmia/anosmia (63,15%), e cefaléia (62%). Os pacientes com polipose associada apresentaram mais queixas no pré-operatório e no pós-operatório e revelaram uma tendência a um maior grau de melhora nos principais sintomas referidos em comparação àqueles com RSC. CONCLUSÃO: Os principais sintomas avaliados melhoraram após a cirurgia endoscópica, mas a magnitude da melhora foi inferior ao esperado. A presença de rinite alérgica, o não-uso do spray nasal e o controle ambiental precário podem ter influenciado esse resultado em nosso meio. Os pacientes com polipose nasal obtiveram melhora sintomática e da qualidade de vida, na maioria dos sintomas, superior aos pacientes com RSC.

Uniformity of liquid distribution in the canopy of the bean plant, using the spectrophotometric analysis

Fungal diseases are important factors limiting common bean yield. White mold is one of the main diseases caused by soil pathogens. The objective of this study was to quantify the distribution of a fungicide solution sprayed into the canopy of bean plants by spectrophotometry, using a boom sprayer with and without air assistance. The experiment was arranged in a 2 x 2 x 2 factorial (two types of nozzles, two application rates, and air assistance on and off) randomized block design with four replications. Air assistance influenced the deposition of solution on the bean plant and yield increased significantly with the increased rate of application and air assistance in the boom sprayer.

Parameters of electrostatic spraying and its influence on the application efficiency

When the electrostatic spraying is used correctly, it provides advantages over conventional systems, however many factors can affect the system efficiency. Therefore, the objective of this study was to evaluate the charge/mass ratio (Q/M) at different spraying distances (0, 1, 2, 3, 4 and 5 m), and the liquid deposition efficiency on the target. Evaluating the Q/M ratio the Faraday cage method was used and to evaluate the liquid deposition efficiency the artificial targets were positioned longitudinally and transversely to the spray jet. It was found that the spraying distance affects the Q/M ratio, consequently, the liquid deposition efficiency. For the closest distance to the target the Q/M ratio was 4.11 mC kg-1, and at distances of 1, 2, 3, 4 and 5 m, the ratio decreased to 1.38, 0.64, 0.31, 0.17 and 0.005 mC kg-1, respectively. For the liquid deposition, the electrostatic system was affected by the target orientation and spraying distance. The target transversely to the jet of liquid did not improve the liquid deposition, but longitudinally increased the deposition up to 3 meters of distance.

THE CONTROL OF ANOPHELINE MOSQUITOS BY THE SPRAYING OF DELTAMETHRIN ON RAFFIA CURTAINS USED IN MINERS' HUTS IN AREAS ENDEMIC FOR MALARIA

The residual potential of an aqueous solution of Deltamethrin (FW 25 mg i.a./m2) was evaluated on raffia curtains. These are sheets of synthetic material used in the construction of huts to house miners. Experiments were conducted during 420 days and the curtains were always rolled up in the daytime and unrolled in late afternoon. Data analyzed by logarithmic regression indicated that raffia treated with Deltamethrin had higher mortality indices than that covered with DDT. The residual capacity of Deltamethrin on raffia was high. The mortality percentage was above 85% after 360 days and dropped to about 50% at 420 days. The effect of DDT was reduced after 180 days and reached zero by the end of the experiment. Based on the results of these experiments, it is recommended that Deltamethrin be used to spray raffia curtains in mining regions and other areas that are endemic for malaria.

The control of Chagas' disease transmission in Mambaí, Goiás-Brazil (1980-1981)

BHC application in Mambai in 1980 resulted in a significant decline but not elimination of domiciliated T. infestans. T. sordida peridomestic populations persist and could pose a threat to interupting human transmission of T. cruzi The results of one massive attack spray application alone was compared with this application plus one selective application as regards the presence of T. infestans in houses oneyear later. No significance difference could be detected. It is likely that for interruption of T. infestans transmission cheaper procedures can be devised than those currently in use. A further pilot study of a virgin community afflicted by T. infestans transmission is indicated since Mambai cannot be regarded as a representative areafor those still awaiting insecticide application.

Malaria in the State of Amazonas: a typical Brazilian tropical disease influenced by waves of economic development

In Brazil, more than 99% of malaria cases are reported in the Amazon, and the State of Amazonas accounts for 40% of this total. However, the accumulated experience and challenges in controlling malaria in this region in recent decades have not been reported. Throughout the first economic cycle during the rubber boom (1879 to 1912), malaria was recorded in the entire state, with the highest incidence in the villages near the Madeira River in the Southern part of the State of Amazonas. In the 1970s, during the second economic development cycle, the economy turned to the industrial sector and demanded a large labor force, resulting in a large migratory influx to the capital Manaus. Over time, a gradual increase in malaria transmission was observed in peri-urban areas. In the 1990s, the stimulation of agroforestry, particularly fish farming, led to the formation of permanent Anopheline breeding sites and increased malaria in settlements. The estimation of environmental impacts and the planning of measures to mitigate them, as seen in the construction of the Coari-Manaus gas pipeline, proved effective. Considering the changes occurred since the Amsterdam Conference in 1992, disease control has been based on early diagnosis and treatment, but the development of parasites that are resistant to major antimalarial drugs in Brazilian Amazon has posed a new challenge. Despite the decreased lethality and the gradual decrease in the number of malaria cases, disease elimination, which should be associated with government programs for economic development in the region, continues to be a challenge.

The residual effect of deltametrine in the control of Malaria as observed on fifferent types Of walls In the Brazilian Amazon 1

The residual power of deltametrine FW (25 mg 1 .a/m2) was evaluated and compared to that of DDT (2 g i.a./m2) by means of biological tests. The different kinds of material used in constructing houses in Amazonia, such as: masonry, wood, and wattle and daub, were used. Data from logistic regression showed that the drop in mortality, the inclination of the curve in relation to time, was similar for the two insecticides in the first samples. The negative coeficient for the variable, months after application, confirmed a reduction in the activity of both insecticides. Wooden and wattle walls showed positive and negative coeficiencies respectively from the beginning. The wooden walls retained a residual effect but the wattle walls were shown to be the least indicated for the application of insecticides The experiments demonstrated a more prolonged residual effect for deltametrine as compared to DDT, and that insecticides work better on brick and cement and wooden walls than they do on wattle and daub constructions. For these reasons, it would be necessary to spray brick and cement walls every 8 months, wooden ones every 9 months and wattle constructions every 7 months to control the vectors of malaria.

Colesterol total e fatores associados: estudo de base escolar no sul do Brasil

FUNDAMENTO: Evidências têm sugerido que uma parcela importante de crianças e adolescentes apresenta níveis elevados de colesterol total. OBJETIVO: Estimar a prevalência de hipercolesterolemia e fatores associados em escolares de 7 a 12 anos de idade. MÉTODOS: Estudo transversal de base escolar de uma amostra aleatória composta por 1.294 escolares de 7 a 12 anos, de Caxias do Sul (RS). Os escolares responderam a uma entrevista com informações sobre nível socioeconômico, hábitos alimentares e hábitos de atividade física e de lazer. Foram realizadas medidas de colesterol total, de aptidão cardiorrespiratória, de massa corporal, estatura para o cálculo do índice de massa corporal. Para o tratamento dos dados foram utilizadas as análises univariada, bivariada e multivariada. RESULTADOS: A análise multivariada identificou que indivíduos com o nível socioeconômico alto (OR: 1,70; IC: 1,05-2,75), do sexo feminino (OR: 1,32; IC: 1,03-1,67), e com excesso de peso (OR: 1,40; IC: 1,10-1,77) apresentam chances aumentadas de terem colesterol total aumentado (> 3º tercil). CONCLUSÃO: Elevados níveis de colesterol total em escolares de 7 a 12 anos estão associados ao nível socioeconômico alto, ao sexo feminino e ao excesso de peso. O incentivo a um estilo de vida ativo e a hábitos alimentares adequados pode auxiliar no controle dos níveis de colesterol e diminuir os fatores de risco.

Studies on the mineral nutrition and fertilization of the passion fruit plant (Passiflora edulis F. flavicarpa): II. placement of fertilizer phosphorus

1. Tagged superphosphate was applied to 2.5 year old passion fruit plants from a commercial plantation established in a sandy loam. 2. 100 grams of the fertilizer were distributed in the following ways: in a circular furrow 20 cm around the plant 40 cm from the stems; in a circular strip 10 cm wide, 40 cm from the stems; in six holes around the plants, 40 cm from the stems 20 cm deep, 2.5 cm in diameter. 3. 10 grams of the fertilizer in 11 of water were sprayed to the leaves. 4. Three weeks after the treatments were made, leaf samples were taken for analysis. 5. Determinations of specific activities both in the leaves and in the fertilizer used have shown that R in the plant was derived from the superphosphate in the following relative proportions (by making the first treatment equal to 100): circular furrow = 100; circular strip = 120; holes = 30; foliar spray = 230.