Variação da densidade aparente e resistência à compressão paralela às fibras em função da intensidade de desbaste, adubação e posição radial em Eucalyptus grandis hill ex-maiden

O Eucalyptus grandis destaca-se pela produtividade e qualidade de sua madeira. O manejo florestal ideal das árvores em que se obtém maior proporção de madeira e melhor qualidade é uma das questões a serem consideradas nas pesquisas de E. grandis. Este trabalho teve como objetivo estudar a variação da densidade aparente e da resistência à compressão paralela às fibras em função da intensidade de desbaste, adubação e classe de diâmetro, na posição radial nas árvores de uma população de E. grandis de 21 anos de idade, manejada pelo sistema de desbastes seletivos com aplicação de fertilizantes na época do início dos desbastes, ou seja, aos 5 anos. Os fatores utilizados foram: três intensidades de desbastes seletivos (37, 50 e 75%), presença ou ausência de fertilizantes, três classes de diâmetro e cinco posições radiais. As influências dos fatores e de suas combinações foram avaliadas na densidade aparente e na resistência à compressão da madeira. A densidade aparente da madeira e a resistência à compressão foram influenciadas pelos fatores: adubo e classe de diâmetro em quase todas as posições radiais aumentaram no sentido da medula para a casca. Observou-se relação positiva entre densidade aparente, resistência à compressão e posição radial.

Determinação do perfil radial de aspersores a partir de ensaios de distribuição de água em sistemas autopropelidos de irrigação

Este trabalho apresenta uma rotina computacional, em Visual Basic 6, para determinar o perfil radial de aspersores, mediante ensaios de equipamentos autopropelidos de irrigação. Para a avaliação do programa, foi utilizado o aplicativo computacional SIMULASOFT e dados de ensaios de campo de sistemas autopropelidos de irrigação. As lâminas aplicadas, geradas pelo programa SIMULASOFT, foram para o aspersor PLONA-RL250 (bocal = 20 x 6 mm; pressão = 490 kPa), em deslocamento linear com velocidade de 50 m h-1, e quatro ângulos de giro distintos (180; 270; 330 e 360º). As lâminas aplicadas, observadas nos ensaios de campo, em condições de vento menores que 1,5 m s-1, foram para o aspersor PLONA-RL250, operando na pressão de 392 kPa e sob as condições: i) bocal de 14 mm, ângulo de giro de 240º e velocidade de 30 m h-1; ii) bocal de 14 x 6 mm, ângulo de giro de 270º e velocidade de 55 m h-1. O perfil radial gerado pela rotina computacional com as lâminas aplicadas, geradas com SIMULASOFT, foi igual ao perfil radial obtido em ensaios de laboratório, revelando que o procedimento de cálculo está correto. Uma boa semelhança entre os perfis radiais do aspersor, determinados em ensaios de laboratório e gerados pela rotina computacional, com as lâminas obtidas nos ensaios de campo, foi observada, mostrando que ensaios de campo de sistemas autopropelidos de irrigação podem ser utilizados para a obtenção do perfil radial de aspersores.

Qualidade de sementes de soja em função do horário de colheita e do sistema de trilha de fluxo radial e axial

O trabalho objetivou avaliar dois tipos de colhedoras, de fluxo radial e axial, em relação à qualidade física e fisiológica de sementes de duas cultivares de soja, BRS 184 e BRS 133, colhidas em dois horários, às 10 e 18 horas. A colhedora de fluxo radial trabalhou a 5,0 km h-1 , com o cilindro batedor a 750 rotações por minuto (rpm). A colhedora de fluxo axial trabalhou a 8,0 km h-1, e rotor com 650 rpm. Para a avaliação da qualidade física e fisiológica das sementes, foram realizados testes de germinação, envelhecimento acelerado, tetrazólio, dano mecânico (hipoclorito), umidade de campo e laboratório, sementes quebradas (bandinha) e pureza. A colheita realizada às 18 horas, com grau de umidade menor que 12%, ocasionou maiores danos mecânicos nas sementes da cultivar BRS 184. A colhedora de sistema de fluxo axial resultou em sementes de melhor qualidade fisiológica para a cultivar BRS 184, e em menores percentuais de sementes quebradas e maior pureza para ambas as cultivares, comparativamente à colhedora de sistema de trilha com fluxo radial.

Uniformidade de aplicação de água de equipamentos autopropelidos de irrigação com aspersores de perfil radial triangular, elíptico e retangular

Este trabalho apresenta resultados de simulações digitais da uniformidade de aplicação de água de sistemas autopropelidos de irrigação, para a condição de ausência de ventos. Nas simulações foram considerados aspersores com perfis radiais de distribuição de água tipo triangular, elíptico e retangular, operando sob diferentes combinações de ângulo de giro (de 180 até 360º) e espaçamento entre carreadores (de 0 a 100% do diâmetro molhado - DM). Os resultados das simulações foram apresentados em três grupos distintos, cada um representando a mesma forma geométrica do perfil radial de distribuição de água. Independentemente do ângulo de giro, os melhores valores de uniformidade foram obtidos com espaçamentos menores que 45% e entre 55% e 70% do DM para o perfil radial triangular e com espaçamentos menores que 50% e entre 70% e 90% do DM para os perfis radiais elíptico e retangular. Para os três perfis radiais, ângulos de giro do aspersor entre 180 e 230º geram maiores valores de coeficiente de uniformidade.

Modeling of turbulent flow through radial diffuser

The work considers the modeling of turbulent flow in radial diffuser with axial feeding. Due to its claimed capability to predict flow including features such as separation, curvature and adverse pressure gradient, the RNG k-epsilon model of Orzag et al. (1993) is applied in the present analysis. The governing equations are numerically solved using the finite volume methodology. Experiments were conducted to assess the turbulence model. Numerical results of pressure distribution on the front disk surface for different flow conditions when compared to the experimental data indicated that the RNG k-epsilon model is adequate to predict this class of flow.

Lagrangian multipliers for coast-arcs of optimum space trajectories

Some properties of generalized canonical systems - special dynamical systems described by a Hamiltonian function linear in the adjoint variables - are applied in determining the solution of the two-dimensional coast-arc problem in an inverse-square gravity field. A complete closed-form solution for Lagrangian multipliers - adjoint variables - is obtained by means of such properties for elliptic, circular, parabolic and hyperbolic motions. Classic orbital elements are taken as constants of integration of this solution in the case of elliptic, parabolic and hyperbolic motions. For circular motion, a set of nonsingular orbital elements is introduced as constants of integration in order to eliminate the singularity of the solution.

Numerical and experimental investigation of thermal louvers for space applications

Thermal louvers, using movable or rotating shutters over a radiating surface, have gained a wide acceptance as highly efficient devices for controlling the temperature of a spacecraft. This paper presents a detailed analysis of the performance of a rectangular thermal louver with movable blades. The radiative capacity of the louver, determined by its effective emittance, is calculated for different values of the blades opening angle. Experimental results obtained with a prototype of a spacecraft thermal louver show good agreement with the theoretical values.

Experimental validation of a 3-D vision-based measurement system applied to robot calibration

One of the problems that slows the development of off-line programming is the low static and dynamic positioning accuracy of robots. Robot calibration improves the positioning accuracy and can also be used as a diagnostic tool in robot production and maintenance. A large number of robot measurement systems are now available commercially. Yet, there is a dearth of systems that are portable, accurate and low cost. In this work a measurement system that can fill this gap in local calibration is presented. The measurement system consists of a single CCD camera mounted on the robot tool flange with a wide angle lens, and uses space resection models to measure the end-effector pose relative to a world coordinate system, considering radial distortions. Scale factors and image center are obtained with innovative techniques, making use of a multiview approach. The target plate consists of a grid of white dots impressed on a black photographic paper, and mounted on the sides of a 90-degree angle plate. Results show that the achieved average accuracy varies from 0.2mm to 0.4mm, at distances from the target from 600mm to 1000mm respectively, with different camera orientations.

Contrast sensitivity to radial frequencies modulated by Jn and j n Bessel profiles

We measured human contrast sensitivity to radial frequencies modulated by cylindrical (Jo) and spherical (j o) Bessel profiles. We also measured responses to profiles of j o, j1, j2, j4, j8, and j16. Functions were measured three times by at least three of eight observers using a forced-choice method. The results conform to our expectations that sensitivity would be higher for cylindrical profiles. We also observed that contrast sensitivity is increased with the j n order for n greater than zero, having distinct orderly effects at the low and high frequency ends. For n = 0, 1, 2, and 4 sensitivity tended to occur around 0.8-1.0 cpd while for n = 8 and 16 it seemed to shift gradually to 0.8-3.0 cpd. We interpret these results as being consistent with the possibility that spatial frequency processing by the human visual system can be defined a priori in terms of polar coordinates and discuss its application to study face perception.

Amino acid composition of parturient plasma, the intervillous space of the placenta and the umbilical vein of term newborn infants

The objective of the present study was to determine the levels of amino acids in maternal plasma, placental intervillous space and fetal umbilical vein in order to identify the similarities and differences in amino acid levels in these compartments of 15 term newborns from normal pregnancies and deliveries. All amino acids, except tryptophan, were present in at least 186% higher concentrations in the intervillous space than in maternal venous blood, with the difference being statistically significant. This result contradicted the initial hypothesis of the study that the plasma amino acid levels in the placental intervillous space should be similar to those of maternal plasma. When the maternal venous compartment was compared with the umbilical vein, we observed values 103% higher on the fetal side which is compatible with currently accepted mechanisms of active amino acid transport. Amino acid levels of the placental intervillous space were similar to the values of the umbilical vein except for proline, glycine and aspartic acid, whose levels were significantly higher than fetal umbilical vein levels (average 107% higher). The elevated levels of the intervillous space are compatible with syncytiotrophoblast activity, which maintain high concentrations of free amino acids inside syncytiotrophoblast cells, permitting asymmetric efflux or active transport from the trophoblast cells to the blood in the intervillous space. The plasma amino acid levels in the umbilical vein of term newborns probably may be used as a standard of local normality for clinical studies of amino acid profiles.

Radial frequency stimuli and sine-wave gratings seem to be processed by distinct contrast brain mechanisms

An assumption commonly made in the study of visual perception is that the lower the contrast threshold for a given stimulus, the more sensitive and selective will be the mechanism that processes it. On the basis of this consideration, we investigated contrast thresholds for two classes of stimuli: sine-wave gratings and radial frequency stimuli (i.e., j0 targets or stimuli modulated by spherical Bessel functions). Employing a suprathreshold summation method, we measured the selectivity of spatial and radial frequency filters using either sine-wave gratings or j0 target contrast profiles at either 1 or 4 cycles per degree of visual angle (cpd), as the test frequencies. Thus, in a forced-choice trial, observers chose between a background spatial (or radial) frequency alone and the given background stimulus plus the test frequency (1 or 4 cpd sine-wave grating or radial frequency). Contrary to our expectations, the results showed elevated thresholds (i.e., inhibition) for sine-wave gratings and decreased thresholds (i.e., summation) for radial frequencies when background and test frequencies were identical. This was true for both 1- and 4-cpd test frequencies. This finding suggests that sine-wave gratings and radial frequency stimuli are processed by different quasi-linear systems, one working at low luminance and contrast level (sine-wave gratings) and the other at high luminance and contrast levels (radial frequency stimuli). We think that this interpretation is consistent with distinct foveal only and foveal-parafoveal mechanisms involving striate and/or other higher visual areas (i.e., V2 and V4).

Mesopic radial frequency contrast sensitivity function for young and older adults

The objective of the present study was to determine contrast sensitivity curves of concentric circular patterns with radial frequencies of 0.25, 0.5, 1.0, 2.0, and 4.0 cycles per degree in young and older adult volunteers. These parameters were also compared with sensitivity contrasts for sine-wave gratings. All participants had normal acuity vision and were free of identifiable ocular illness. Contrast sensitivity was measured in 6 young adults aged 19 to 23 years and 6 older adults aged 60 to 69 years using the psychophysical forced-choice method. In this paradigm the volunteers had to decide which of two stimuli contained the above radial frequencies at low contrast levels. The other neutral stimulus was gray with homogeneous luminance. We detected a decline in contrast sensitivity for older adults at all radial frequencies compared to young adults. Also, contrast sensitivity for sine-wave gratings at all measured frequencies was better, as predicted, for all young adults. Maximum sensitivities in the radial frequency contrast sensitivity function and contrast sensitivity function occurred at 0.25 and 0.5 cycles per degree, respectively, for both young and older adults. These results suggest age-related changes in the contrast sensitivity function for concentric symmetrical stimuli.

Plasma amino acids in pregnancy, placental intervillous space and preterm newborn infants

Plasma amino acid levels have never been studied in the placental intervillous space of preterm gestations. Our objective was to determine the possible relationship between plasma amino acids of maternal venous blood (M), of the placental intervillous space (PIVS) and of the umbilical vein (UV) of preterm newborn infants. Plasma amino acid levels were analyzed by ion-exchange chromatography in M from 14 parturients and in the PIVS and UV of their preterm newborn infants. Mean gestational age was 34 ± 2 weeks, weight = 1827 ± 510 g, and all newborns were considered adequate for gestational age. The mean Apgar score was 8 and 9 at the first and fifth minutes. Plasma amino acid values were significantly lower in M than in PIVS (166%), except for aminobutyric acid. On average, plasma amino acid levels were significantly higher in UV than in M (107%) and were closer to PIVS than to M values, except for cystine and aminobutyric acid (P < 0.05). Comparison of the mean plasma amino acid concentrations in the UV of preterm to those of term newborn infants previously studied by our group showed no significant difference, except for proline (P < 0.05), preterm > term. These data suggest that the mechanisms of active amino acid transport are centralized in the syncytiotrophoblast, with their passage to the fetus being an active bidirectional process with asymmetric efflux. PIVS could be a reserve amino acid space for the protection of the fetal compartment from inadequate maternal amino acid variations.

Comparative efficacy and safety of the left versus right radial approach for percutaneous coronary procedures: a meta-analysis including 6870 patients

The radial approach is widely used in the treatment of patients with coronary artery disease. We conducted a meta-analysis of published results on the efficacy and safety of the left and right radial approaches in patients undergoing percutaneous coronary procedures. A systematic search of reference databases was conducted, and data from 14 randomized controlled trials involving 6870 participants were analyzed. The left radial approach was associated with significant reductions in fluoroscopy time [standardized mean difference (SMD)=-0.14, 95% confidence interval (CI)=-0.19 to -0.09; P<0.00001] and contrast volume (SMD=-0.07, 95%CI=-0.12 to -0.02; P=0.009). There were no significant differences in rate of procedural failure of the left and the right radial approaches [risk ratios (RR)=0.98; 95%CI=0.77-1.25; P=0.88] or procedural time (SMD=-0.05, 95%CI=0.17-0.06; P=0.38). Tortuosity of the subclavian artery (RR=0.27, 95%CI=0.14-0.50; P<0.0001) was reported more frequently with the right radial approach. A greater number of catheters were used with the left than with the right radial approach (SMD=0.25, 95%CI=0.04-0.46; P=0.02). We conclude that the left radial approach is as safe as the right radial approach, and that the left radial approach should be recommended for use in percutaneous coronary procedures, especially in percutaneous coronary angiograms.

Novel retrograde puncture method to establish preperitoneal space for laparoscopic direct inguinal hernia repair with internal ring suturing

The aim of this study was to explore the clinical efficacy of a novel retrograde puncture approach to establish a preperitoneal space for laparoscopic direct inguinal hernia repair with inguinal ring suturing. Forty-two patients who underwent laparoscopic inguinal hernia repair with retrograde puncture for preperitoneal space establishment as well as inguinal ring suturing between August 2013 and March 2014 at our hospital were enrolled. Preperitoneal space was successfully established in all patients, with a mean establishment time of 6 min. Laparoscopic repairs were successful in all patients, with a mean surgical time of 26±15.1 min. Mean postoperative hospitalization duration was 3.0±0.7 days. Two patients suffered from postoperative local hematomas, which were relieved after puncturing and drainage. Four patients had short-term local pain. There were no cases of chronic pain. Patients were followed up for 6 months to 1 year, and no recurrence was observed. Our results demonstrate that preperitoneal space established by the retrograde puncture technique can be successfully used in adult laparoscopic hernioplasty to avoid intraoperative mesh fixation, and thus reduce medical costs.