119 resultados para Paint spray
Resumo:
Spray drying is an important method used by the food industry in the production of microencapsulated flavors to improve handling and dispersion properties. The objective of this study was to evaluate the influence of the process conditions on the properties of rosemary essential oil microencapsulated by spray drying using gum Arabic as encapsulant. The effects of the wall material concentration (10-30%), inlet air temperature (135-195 ºC), and feed flow rate (0.5-1.0 L.h-1) on the moisture content, hygroscopicity, wettability, solubility, bulk and tapped densities, particle density, flowability, and cohesiveness were evaluated using a 2³ central composite rotational experimental design. Moisture content, hygroscopicity and wettability were significantly affected by the three factors analyzed. Bulk density was positively influenced by the wall material concentration and negatively by the inlet air temperature. Particle density was influenced by the wall material concentration and the inlet air temperature variables, both in a negative manner. As for the solubility, tapped density, flowability, and cohesiveness, the models did not fit the data well. The results indicated that moderate wall material concentration (24%), low inlet air temperature (135 ºC), and moderate feed flow rate (0.7 L.h-1) are the best spray drying conditions.
Resumo:
This study aimed at contributing to the development of new foodstuffs made by soursop pulp powder obtained by spraydrying. Different concentrations of maltodextrin DE 20 (15, 30, and 45%) were added to commercial soursop pulp, which was dehydrated afterwards. The following analyses were carried out: water activity, moisture, pH, soluble solids, acidity, ascorbic acid, hygroscopicity, degree of caking, and rehydration time. The results obtained for the three powder treatments (15, 30 and 45% of maltodextrin) were, respectectively: water activity (0.19a±0.00; 0.20a±0.00; 0.18a±0.01); moisture (1.17c±0.12; 1.47b±0.05; 1.82a±0.06); pH (3.75a±0.05; 3.73a±0.06; 3.70a±0.03); soluble solids (89.67a±0.00; 89.84a±0.00; 90.00a±0.06); acidity (3.01a±0.02; 1.91b±0.03; 1.24c±0.03); ascorbic acid (18.90a±0.00; 14.48b±0.00; 11.26b±0.78); hygroscopicity (5.93a±0.40; 3.82b±0.16; 3.28b±0.38); degree of caking (78.36a±2.86; 35.38b±6.07; 24.77b4.89), and rehydration time (02.03a±0.46; 01.16ab±0.50; 0.59b±0.30). The soursop powders with 30 and 45% of maltodextrin had few significant differences in terms of physicochemical and hygroscopic characteristics, which allow us to consider the percentage of 30% of maltodextrin, in this study, as the best percentage for soursop pulp atomization.
Resumo:
A cirurgia endoscópica nasal atualmente é o tratamento preconizado na rinossinusite crônica. O sucesso no alívio dos sintomas e a melhora da qualidade de vida dos pacientes são os objetivos principais desse estudo. FORMA DE ESTUDO: Estudo de coorte histórico longitudinal. METODOLOGIA: Os pacientes encaminhados ao Hospital das Clínicas-UFPE para tratamento cirúrgico endoscópico de rinossinusite crônica (RSC) responderam questionários durante o ano de 2003-2004. Os sintomas pré e pós-operatórios foram graduados e comparados utilizando uma escala de 5 pontos. RESULTADOS: Foram 24 questionários respondidos. Onze pacientes apresentavam RSC e 13 RSC associada a polipose nasossinusal. A qualidade de vida estava prejudicada em todos os entrevistados, e melhorou consideravelmente em 54,2% dos casos. Todos recomendariam a cirurgia a outras pessoas com problemas nasais semelhantes e apenas 3 pacientes não operariam novamente. Os sintomas com maiores índices de melhora foram: obstrução nasal (83,3%), cacosmia (80%), hiposmia/anosmia (63,15%), e cefaléia (62%). Os pacientes com polipose associada apresentaram mais queixas no pré-operatório e no pós-operatório e revelaram uma tendência a um maior grau de melhora nos principais sintomas referidos em comparação àqueles com RSC. CONCLUSÃO: Os principais sintomas avaliados melhoraram após a cirurgia endoscópica, mas a magnitude da melhora foi inferior ao esperado. A presença de rinite alérgica, o não-uso do spray nasal e o controle ambiental precário podem ter influenciado esse resultado em nosso meio. Os pacientes com polipose nasal obtiveram melhora sintomática e da qualidade de vida, na maioria dos sintomas, superior aos pacientes com RSC.
Resumo:
When the electrostatic spraying is used correctly, it provides advantages over conventional systems, however many factors can affect the system efficiency. Therefore, the objective of this study was to evaluate the charge/mass ratio (Q/M) at different spraying distances (0, 1, 2, 3, 4 and 5 m), and the liquid deposition efficiency on the target. Evaluating the Q/M ratio the Faraday cage method was used and to evaluate the liquid deposition efficiency the artificial targets were positioned longitudinally and transversely to the spray jet. It was found that the spraying distance affects the Q/M ratio, consequently, the liquid deposition efficiency. For the closest distance to the target the Q/M ratio was 4.11 mC kg-1, and at distances of 1, 2, 3, 4 and 5 m, the ratio decreased to 1.38, 0.64, 0.31, 0.17 and 0.005 mC kg-1, respectively. For the liquid deposition, the electrostatic system was affected by the target orientation and spraying distance. The target transversely to the jet of liquid did not improve the liquid deposition, but longitudinally increased the deposition up to 3 meters of distance.
Resumo:
OBJECTIVE: To analyze household risk factors associated with high lead levels in surface dental enamel. METHODS: A cross-sectional study was conducted with 160 Brazilian adolescents aged 14-18 years living in poor neighborhoods in the city of Bauru, southeastern Brazil, from August to December 2008. Body lead concentrations were assessed in surface dental enamel acid-etch microbiopsies. Dental enamel lead levels were measured by graphite furnace atomic absorption spectrometry and phosphorus levels were measured by inductively coupled plasma optical emission spectrometry. The parents answered a questionnaire about their children's potential early (05 years old) exposure to well-known lead sources. Logistic regression was used to identify associations between dental enamel lead levels and each environmental risk factor studied. Social and familial covariables were included in the models. RESULTS: The results suggest that the adolescents studied were exposed to lead sources during their first years of life. Risk factors associated with high dental enamel lead levels were living in or close to a contaminated area (OR = 4.49; 95% CI: 1.69;11.97); and member of the household worked in the manufacturing of paints, paint pigments, ceramics or batteries (OR = 3.43; 95% CI: 1.31;9.00). Home-based use of lead-glazed ceramics, low-quality pirated toys, anticorrosive paint on gates and/or sale of used car batteries (OR = 1.31; 95% CI: 0.56;3.03) and smoking (OR = 1.66; 95% CI: 0.52;5.28) were not found to be associated with high dental enamel lead levels. CONCLUSIONS: Surface dental enamel can be used as a marker of past environmental exposure to lead and lead concentrations detected are associated to well-known sources of lead contamination.
Resumo:
The residual potential of an aqueous solution of Deltamethrin (FW 25 mg i.a./m2) was evaluated on raffia curtains. These are sheets of synthetic material used in the construction of huts to house miners. Experiments were conducted during 420 days and the curtains were always rolled up in the daytime and unrolled in late afternoon. Data analyzed by logarithmic regression indicated that raffia treated with Deltamethrin had higher mortality indices than that covered with DDT. The residual capacity of Deltamethrin on raffia was high. The mortality percentage was above 85% after 360 days and dropped to about 50% at 420 days. The effect of DDT was reduced after 180 days and reached zero by the end of the experiment. Based on the results of these experiments, it is recommended that Deltamethrin be used to spray raffia curtains in mining regions and other areas that are endemic for malaria.
Resumo:
BHC application in Mambai in 1980 resulted in a significant decline but not elimination of domiciliated T. infestans. T. sordida peridomestic populations persist and could pose a threat to interupting human transmission of T. cruzi The results of one massive attack spray application alone was compared with this application plus one selective application as regards the presence of T. infestans in houses oneyear later. No significance difference could be detected. It is likely that for interruption of T. infestans transmission cheaper procedures can be devised than those currently in use. A further pilot study of a virgin community afflicted by T. infestans transmission is indicated since Mambai cannot be regarded as a representative areafor those still awaiting insecticide application.
Resumo:
The residual power of deltametrine FW (25 mg 1 .a/m2) was evaluated and compared to that of DDT (2 g i.a./m2) by means of biological tests. The different kinds of material used in constructing houses in Amazonia, such as: masonry, wood, and wattle and daub, were used. Data from logistic regression showed that the drop in mortality, the inclination of the curve in relation to time, was similar for the two insecticides in the first samples. The negative coeficient for the variable, months after application, confirmed a reduction in the activity of both insecticides. Wooden and wattle walls showed positive and negative coeficiencies respectively from the beginning. The wooden walls retained a residual effect but the wattle walls were shown to be the least indicated for the application of insecticides The experiments demonstrated a more prolonged residual effect for deltametrine as compared to DDT, and that insecticides work better on brick and cement and wooden walls than they do on wattle and daub constructions. For these reasons, it would be necessary to spray brick and cement walls every 8 months, wooden ones every 9 months and wattle constructions every 7 months to control the vectors of malaria.
Resumo:
The purpose of this study is to evaluate in vitro the color stability of composite resins when exposed to beverages with high coloring contents from the Amazon region. 240 samples from four different composite brands (Natural Look, Z350, 4Seasons and Opallis) of hue A3 were fabricated using an acrylic matrix. The samples were stored in distilled water at 37ºC for 24 hours. The initial color (T0) was registered using a Canon EOS Rebel XTi 10 mp camera, and then the samples were divided into four groups (n=15): G1 (coffee), G2 (açaí juice), G3 (energetic guaraná) and G4 (control - distilled water). The samples were exposed to solutions of DES (6hs) and RE (18hs) and placed in a double boiler under constant agitation, at 37ºC for 30 days. The samples were immersed in the coloring solutions for 15 minutes daily. After 7, 15 and 30 days, new photographic registers were made (T1, T2 and T3). The images were analyzed using Corel PHOTO-PAINT 12 software to identify the colors through the HSB system. The Kruskal-Wallis and t tests (p<0.05) demonstrated significant differences in color (hue, saturation and brightness). The results revealed that none of the tested composites showed color stability when exposed to coloring solutions, and that the Amazon region beverages (açaí juice and energetic guaraná) showed to be less coloring than coffee.
Resumo:
1. Tagged superphosphate was applied to 2.5 year old passion fruit plants from a commercial plantation established in a sandy loam. 2. 100 grams of the fertilizer were distributed in the following ways: in a circular furrow 20 cm around the plant 40 cm from the stems; in a circular strip 10 cm wide, 40 cm from the stems; in six holes around the plants, 40 cm from the stems 20 cm deep, 2.5 cm in diameter. 3. 10 grams of the fertilizer in 11 of water were sprayed to the leaves. 4. Three weeks after the treatments were made, leaf samples were taken for analysis. 5. Determinations of specific activities both in the leaves and in the fertilizer used have shown that R in the plant was derived from the superphosphate in the following relative proportions (by making the first treatment equal to 100): circular furrow = 100; circular strip = 120; holes = 30; foliar spray = 230.
Resumo:
An experiment was carried out with common bean (Phaseolus vulgaris, L.) in a Red Yellow Latossol, sandy phase, in order to study the influence of foliar spraying of the Hanway nutrient solution (NPKS) at grain filling stage on: 1) grain yield; 2) the uptake of fertilizer and soil nitrogen by this crop through the root system and 3) the efficiency of utilization of the nitrogen in the foliar spray solution by the grain. The results of this experiment showed that the foliar application of the Hanway solution with ammonium nitrate at the pod filling period caused severe leaf burn and grain yield was inferior to that of the plants which received a soil application of this fertilizer at the same stage. These facts can be attributed to the presence of ammonium nitrate in the concentration used. The composition of final spray was: 114,28 Kg NH4NO3 + 43,11 Kg potassium poliphosphate + 12,44 Kg potassium sulphate per 500 litres. The uptake of nitrogen fertilizer through the root system and the efficiency of its utilization was greater than that through the leaves.
Resumo:
The effects of the application of a macronutrient foliar spray combined with micronutrients and growth regulators (Unifol) on peanut grown in a soil with high fertility were investigated. A control without fertilizer and a soil fertilization (250 kg/ha) with NPK 9-30-16 were also established. Other treatments were as follows: Unifol fertilizer (18-12 16) applied 23 days after germination: Unifol (18-12-6) applied at the beginning of flowering; Unifol (18-12-6) applied during flowering, and Unifol (18-12-6) applied 23 days after germination plus Unifol (7-23-7) at the beginning of flowering. No significant differences were found amongst treatments, but certain treatments showed higher productivity e given Unifol fertilizer (18-12-6) applied 23 days after germination plus Unifol (7-23-7) at the flower anthesis. In this treatment, the number of pods, weight of seeds and production of seeds were higher. Best production of forage occurred in the treatment receiving soil fertilization.
Resumo:
1 - Anaerobic bacteria of the Clostridium genus acidify mineral media without when agar is added. 2 - Acidulation results from the attack on the agar as a source of carbon. 3 - The quantity of CO² produced by the decomposition of the agar is approximately that obtained with soil bacteria as shown by Waksmann and Diehm working with hemicelluloses. Although galactone is less atacked than the other hemicelluloses the acidity produced is sufficient to disturb the fermentation tests in semi-solid media with agar. 4 - The acidulation of Spray's sugar-free control medium is probably due to the decomposition of the agar by anaerobes. The acidity produced may interfere with the acidity of the fermentation of the sugar in Spray's test or may be added to it, thus giving a false indication of the real acidity.
Resumo:
a) A junção de extrato de figado-baço ao meio com bismuto se mostrou muito favorável no aumento da produção de H²S pelos clostridios anaerobios. b) O bismuto ajuntado ao meio com extrato fígado-baço revelou maior sensibilidade ao H²S que o meio com ferro de Spray. c) O emprego do meio extrato de fígado-baço-cistina, com indicador de carbonato de bismuto, revelou a produção abundante de H²S por todos os anaeróbios submetidos à prova de produção de H²S, o que não aconteceu com o emprego de ferro como indicador de reação. d) Certas espécies de clostridios possuem capacidade sulfurigena mais precoce e intensa que outras. e) Há variações individuais na precocidade da capacidade sulfurigena dos anaerobios.
Resumo:
Cell-free hemolymph (serum) and hemocytes from Schistosoma mansoni-susceptible (PR albino M-line) and resistant (10-R2) strains of Biomphalaria glabrata were compared by SDS-PAGE, immunoblotting and radioiodination. Whole serum of both snail strains is dominated by hemoglobin (Hb) (MW = 160 Kd). SDS-PAGE. of Hb-depleted serum indicated that the 10-R2 strain has dominant polypeptides in the 50 to 30 Kd range whereas PR albino snails have few low MW proteins. Antibodies raised to whole PR albino and 10-R2 serum, and the 160 Kd (Hb) band reacted similarly in immunoblot assays. Analysis of hemocytes revealed that 10-R2 snails have a surface-exposed protein at about 80 Kd which is not present on PR albino hemocytes. An examination of primary cultured sporocysts indicated the presence of four major surface proteins (40, 50, 55, 70 Kd) and two minor surface-exposed polypeptides (92, 170 Kd). Antibodies raised against live, intact sporocysts reacted almost exclusively with sporocyst-surface proteins when tested by immunoblotting.