Numerical analysis of the impact of charcoal production on soil hydrological behavior, runoff response and erosion susceptibility

The impact of charcoal production on soil hydraulic properties, runoff response and erosion susceptibility were studied in both field and simulation experiments. Core and composite samples, from 12 randomly selected sites within the catchment of Kotokosu were taken from the 0-10 cm layer of a charcoal site soil (CSS) and adjacent field soils (AFS). These samples were used to determine saturated hydraulic conductivity (Ksat), bulk density, total porosity, soil texture and color. Infiltration, surface albedo and soil surface temperature were also measured in both CSS and AFS. Measured properties were used as entries in a rainfall runoff simulation experiment on a smooth (5 % slope) plot of 25 x 25 m grids with 10 cm resolutions. Typical rainfall intensities of the study watershed (high, moderate and low) were applied to five different combinations of Ks distributions that could be expected in this landscape. The results showed significantly (p < 0.01) higher flow characteristics of the soil under charcoal kilns (increase of 88 %). Infiltration was enhanced and runoff volume reduced significantly. The results showed runoff reduction of about 37 and 18 %, and runoff coefficient ranging from 0.47-0.75 and 0.04-0.39 or simulation based on high (200 mm h-1) and moderate (100 mm h-1) rainfall events over the CSS and AFS areas, respectively. Other potential impacts of charcoal production on watershed hydrology were described. The results presented, together with watershed measurements, when available, are expected to enhance understanding of the hydrological responses of ecosystems to indiscriminate charcoal production and related activities in this region.

Bermuda grass sod production as related to nitrogen rates

Of all nutrients, N has the strongest effect on grass growth and an adequate N fertilization can reduce the time required for the formation of high-quality mats. This study aimed to evaluate the influence of N fertilization on Bermuda grass sod production and quality. The experiment was conducted in an area of commercial sod production, in Capela do Alto, state of São Paulo. Cynodon dactylon (Pers) L., known as Bermuda grass, was evaluated in a randomized complete block design with five treatments and four replications. Treatments consisted of five N rates: 0, 150, 300, 450 and 600 kg ha-1. Increasing N applications to Bermuda grass increased the soil cover rate, reducing the time required for mat formation. The accumulation of rhizome + root + stolon dry matter was highest at a rate of 354 kg ha-1 N and the mat resistance to breakage at a rate of 365 kg ha-1 N. Nitrogen rates between 354 and 365 kg ha-1 increased mat resistance and consequently the suitability for postharvest handling, tending to improve the efficiency in the area.

Influence of organic-mineral fertilization of an oxisol on soil chemical properties and Bracharia brizantha production

The use of organic-mineral fertilizer produced by the manufacturing industry of lysine and threonine amino acids can improve the fertility of tropical soils. The objective of this study was to evaluate the influence of different doses of the organic-mineral fertilizer named Ajifer L-14 on chemical properties and on the response with increased production of a forage on a Red Latosol in the northwestern region of São Paulo State, Brazil. A randomized block design was used with seven treatments and four replications. The treatments consisted of: T1- control (without application of Ajifer L-14); T2- control (natural vegetation); T3- mineral fertilization according to crop requirements and soil analysis (application of 1.35 kg plot-1 of urea, 2.20 single superphosphate, and 0.51 KCl, corresponding to 60 of N, 40 P2O5 and 30 kg ha-1 of K2O); T4- fertilization with Ajifer L-14 according to the recommendation resulting from the soil chemical analysis (40 L plot-1, corresponding to 60 kg ha-1 N); T5- fertilization with Ajifer L-14, at a rate of 150 % of the recommended values (60 L plot-1, corresponding to 90 kg ha-1 N); T6- fertilization with Ajifer L-14 at a rate of 50 % of the recommended values (20 L plot-1, corresponding to 30 kg ha-1 N); T7- fertilization with Ajifer L-14 at a rate of 125 % of the recommended values (50 L plot-1, corresponding to 75 kg ha-1 N); T8- fertilization with Ajifer L-14 at a rate of 75 % of the recommended values (30 L plot-1, corresponding to 45 kg ha-1 N). The following soil chemical properties were evaluated (layers 0.0-0.1 and 0.1-0.2 m): P, organic matter, pH, K+, Ca2+, Mg2+, cation exchange capacity, potential acidity, and base saturation. The application of this organic-mineral fertilizer does not influence the soil chemical properties. Regression analysis indicated a polynomial relationship between the application rates of organic-mineral fertilizer and the production of dry matter and crude protein of Bracharia Brizantha.

Optical crop sensor for variable-rate nitrogen fertilization in corn: i - plant nutrition and dry matter production

Variable-rate nitrogen fertilization (VRF) based on optical spectrometry sensors of crops is a technological innovation capable of improving the nutrient use efficiency (NUE) and mitigate environmental impacts. However, studies addressing fertilization based on crop sensors are still scarce in Brazilian agriculture. This study aims to evaluate the efficiency of an optical crop sensor to assess the nutritional status of corn and compare VRF with the standard strategy of traditional single-rate N fertilization (TSF) used by farmers. With this purpose, three experiments were conducted at different locations in Southern Brazil, in the growing seasons 2008/09 and 2010/11. The following crop properties were evaluated: above-ground dry matter production, nitrogen (N) content, N uptake, relative chlorophyll content (SPAD) reading, and a vegetation index measured by the optical sensor N-Sensor® ALS. The plants were evaluated in the stages V4, V6, V8, V10, V12 and at corn flowering. The experiments had a completely randomized design at three different sites that were analyzed separately. The vegetation index was directly related to above-ground dry matter production (R² = 0.91; p<0.0001), total N uptake (R² = 0.87; p<0.0001) and SPAD reading (R² = 0.63; p<0.0001) and inversely related to plant N content (R² = 0.53; p<0.0001). The efficiency of VRF for plant nutrition was influenced by the specific climatic conditions of each site. Therefore, the efficiency of the VRF strategy was similar to that of the standard farmer fertilizer strategy at sites 1 and 2. However, at site 3 where the climatic conditions were favorable for corn growth, the use of optical sensors to determine VRF resulted in a 12 % increase in N plant uptake in relation to the standard fertilization, indicating the potential of this technology to improve NUE.

Postharvest quality of peaches harvested from integrated and conventional production systems

Over three years the postharvest quality of 'Marli' peaches harvested from the integrated (IFP) and conventional production (CFP) systems was evaluated. The peaches were harvested from commercial orchards of Prunus persica at two locations close to the city of São Jerônimo, RS, Brazil, and stored at 0.5°C for 10, 20 or 30 days. The peaches were evaluated at harvest, at retrieval from storage and after ripening periods at 20°C. No differences in fruit weight losses were determined. Decay incidence was low, and no differences were detected amongst systems in both 2001 and 2002 seasons, but in the 2000 season CFP peaches were more decayed. Flesh firmness of peaches from the IFP system were greater than CFP fruits in the years 2000 and 2001. In 2002, firmness changed little during storage and ripening. Peaches from the IFP in 2000 had higher titratable acidity and lower soluble solids. In the 2000 season, flesh browning was observed in decayed fruits, always at ripening after 20 or 30 days of cold storage Chilling injuries such as browning, woolliness and leatheriness ocurred in 2002. There were no differences amongst systems related to peach quality.

Latex production with depolymerizing compounds of actin cytoskeleton in rubber trees

The objective of this work was to assess stimulated latex flow from rubber trees (Hevea brasiliensis) with saturated macrolide (latrunculin A), 1, 5, and 10% potassium iodide in 2% methylcellulose compared with 0.3% ethylene in 2% methylcellulose (check) and 2% methylcellulose (blank). Latex output and contents of pure rubber, total solid, sucrose, inorganic phosphorus, thiol, and Mg2+ were measured. The treatments containing 1% KI or saturated macrolide increased latex yields compared to the blank with 2% methylcellulose alone. The 1% KI or saturated macrolide treatments were equal to that of 0.3% ethylene check treatment. However, 5 and 10% KI were harmful to bark of rubber trees, even caused prolonged tapping panel dryness.

Production of polyclonal antisera using recombinant coat proteins of Grapevine leafroll-associated virus 2 and Grapevine virus B

The objective of this work was to produce and characterize specific antisera against Brazilian isolates of Grapevine leafroll-associated virus 2 (GLRaV-2) and Grapevine virus B (GVB), developed from expressed coat proteins (CPs) in Escherichia coli, and to test their possible use for the detection of these two viruses in diseased grapevines. The coat protein (CP) genes were RT-PCR-amplified, cloned and sequenced. The CP genes were subsequently subcloned, and the recombinant plasmids were used to transform E. coli cells and express the coat proteins. The recombinant coat proteins were purified, and their identities were confirmed by SDS-PAGE and Western blot and used for rabbit immunizations. Antisera raised against these proteins were able to recognize the corresponding recombinant proteins in Western blots and to detect GLRaV-2 and GVB in infected grapevine tissues, by indirect ELISA, discriminating healthy and infected grapevines with absorbances (A405) of 0.08/1.15 and 0.12/1.30, respectively. Expressing CP genes can yield high amount of viral protein with high antigenicity, and GLRaV-2 and GVB antisera obtained in this study can allow reliable virus disease diagnosis.

Production of annual winter forage sown before and after soybean harvest under different nitrogen fertilization levels

The objective of this work was to evaluate the effect on forage yield of sowing winter forage species before and after soybean harvest, at different nitrogen application levels. The experiment was set out in a randomized block design with a strip-split plot arrangement, and three replicates. Sowing methods (18 days before soybean harvest and six days after soybean harvest) were allocated in the main plots, and the combination among forage species (Avena strigosa cv. IAPAR 61 + Lolium multiflorum; A. strigosa cv. Comum + L. multiflorum; A. strigosa cv. Comum + L. multiflorum + Vicia villosa; A. strigosa cv. Comum + L. multiflorum + Raphanus sativus; and L. multiflorum) and nitrogen levels (0, 140, 280 and 420 kg ha-1) in the plots and subplots, respectively. Forage sowing before the soybean harvest made it possible to anticipate first grazing by 14 days, with satisfactory establishment of forage species without affecting forage production. This method permitted a longer grazing period, preventing the need for soil disking, besides allowing the use of no-tillage system. The mixture of forage species enables higher forage yield for pasture in relation to single species pastures, with response to nitrogen fertilization up to 360 kg ha-1.

Dual-purpose wheat grain and animal production under different grazing periods

The objective of this work was to evaluate the influence of different grazing periods on beef animal production and on wheat forage and grain yield. The experiment was carried out in Pato Branco, PR, Brazil. Six grazing periods were evaluated (0, 21, 42, 63, 84, and 105 days) on dual-purpose wheat cultivar BRS Tarumã. Purunã steers, with average live weight of 162 kg and ten months of age, were kept under continuous grazing using a variable stocking rate, in order to maintain the established sward height of 25 cm. Greater increases in total animal gain (TAG) occurred with longer grazing periods. However, there was little increase after 63 days (490 kg ha-1), and TAG decreased from 552 to 448 kg ha-1 between 84 and 105 days. Grain yield decreased from 2,830 to 610 kg ha-1 when the grazing period increased from 0 to 105 days, but there was little change after 63 days (750 kg ha-1). Cultivar BRS Tarumã shows excellent animal production potential, and the decision on how long wheat pastures should be grazed must be based on relative prices of grain and livestock.

Pasture characteristics of Italian ryegrass and milk production under different management strategies

The objective of this work was to assess the effects of the sward structure of Italian ryegrass (Lolium multiflorum), during the first grazing cycle, on its morphological and bromatological characteristics throughout the growing season, and on the performance of dairy cows. The treatments consisted of two structures obtained as a function of canopy-light interception: high-light interception (HLI) and low-light interception (LLI), with different pre-grazing heights in the first grazing cycle. Pasture was managed under rotational grazing with a herbage allowance not below 30 kg dry matter (DM) per cow per day. Three grazing cycles, with a grazing interval of 30 days, were evaluated. Pre-grazing herbage mass was greater (2,240 vs. 1,656 kg ha-1 DM), but the proportion of leaf blades was smaller (0.35 vs. 0.43) for HLI swards. Neutral detergent fiber (NDF) content and organic matter digestibility (OMD) were similar between treatments in the first grazing cycle, but in the second and third ones NDF was greater, and OMD lower, for the HLI swards. Milk yields were greater for cows grazing LLI swards (19.4 vs. 21.1 kg per day). Initial grazing with 90% of light interception promotes greater nutritional value in the subsequent cycles.

Rice yield estimation based on weather conditions and on technological level of production systems in Brazil

The objective of this work was to evaluate an estimation system for rice yield in Brazil, based on simple agrometeorological models and on the technological level of production systems. This estimation system incorporates the conceptual basis proposed by Doorenbos & Kassam for potential and attainable yields with empirical adjusts for maximum yield and crop sensitivity to water deficit, considering five categories of rice yield. Rice yield was estimated from 2000/2001 to 2007/2008, and compared to IBGE yield data. Regression analyses between model estimates and data from IBGE surveys resulted in significant coefficients of determination, with less dispersion in the South than in the North and Northeast regions of the country. Index of model efficiency (E1') ranged from 0.01 in the lower yield classes to 0.45 in higher ones, and mean absolute error ranged from 58 to 250 kg ha‑1, respectively.

Random regression models to estimate genetic parameters for milk production of Guzerat cows using orthogonal Legendre polynomials

The objective of this work was to compare random regression models for the estimation of genetic parameters for Guzerat milk production, using orthogonal Legendre polynomials. Records (20,524) of test-day milk yield (TDMY) from 2,816 first-lactation Guzerat cows were used. TDMY grouped into 10-monthly classes were analyzed for additive genetic effect and for environmental and residual permanent effects (random effects), whereas the contemporary group, calving age (linear and quadratic effects) and mean lactation curve were analized as fixed effects. Trajectories for the additive genetic and permanent environmental effects were modeled by means of a covariance function employing orthogonal Legendre polynomials ranging from the second to the fifth order. Residual variances were considered in one, four, six, or ten variance classes. The best model had six residual variance classes. The heritability estimates for the TDMY records varied from 0.19 to 0.32. The random regression model that used a second-order Legendre polynomial for the additive genetic effect, and a fifth-order polynomial for the permanent environmental effect is adequate for comparison by the main employed criteria. The model with a second-order Legendre polynomial for the additive genetic effect, and that with a fourth-order for the permanent environmental effect could also be employed in these analyses.

Hormonal protocols for in vitro production of Zebu and taurine embryos

The objective of this work was to evaluate the effects of hormonal synchronization protocols, associated or not with follicular development stimulation, on the recovery of oocytes and on in vitro production of Bos indicus and B. taurus embryos, in different seasons. Ultrasound-guided follicular aspirations (n=237) were performed without pre-treatment (G1, control group) and after follicular wave synchronization (G2), or after follicular wave synchronization and follicle growth induction (G3). Bos indicus produced more oocytes and embryos than B. taurus (18.7±0.9 vs. 11.9±0.6 oocytes and 4.8±0.3 vs. 2.1±0.2 embryos). On average, oocyte and embryo yields were higher in G3 than in G2, and both were greater than in G1, which lead to a higher conversion of oocytes to embryos in these treatments. The hot or the cold season did not affect the B. indicus outcomes, whereas, in B. taurus, both oocyte recovery and embryo production were higher in the cold season. Follicular wave synchronization improves ovum pick-up and in vitro production of embryos in both cattle subspecies evaluated.

Adubação orgânica e intensidade luminosa no crescimento e desenvolvimento inicial da Pitaya em Bom Jesus-PI

A pitaya é uma cactácea de sub-bosque, originária de florestas tropicais do México e das Américas Central e do Sul, pouco estudada no Brasil, principalmente quanto à sua resposta à intensidade luminosa e adubação. Nesse sentido, realizou-se um experimento objetivando avaliar crescimento e desenvolvimento inicial da pitaya em função da intensidade luminosa e adubação orgânica. O delineamento experimental adotado foi em blocos casualizados, com tratamentos distribuídos em esquema fatorial 5 x 3, referentes, respectivamente, aos níveis de adubação orgânica (0; 5; 10; 20 e 30 L de esterco bovino cova-1) e aos percentuais de luz (0; 50 e 75% de sombreamento), com quatro repetições. Foram avaliados semanalmente diâmetro do cladódio (mm), altura de estacas (cm) e comprimento do ramo secundário (cm); ao final do experimento, massa fresca da parte aérea e massas secas de raiz e parte aérea (g), sendo que para as variáveis mensuradas, semanalmente, foram calculados os respectivos incrementos percentuais semanais. Segundo os resultados do presente trabalho, no cultivo da pitaya, é necessário o uso de cobertura contra a incidência direta dos raios solares, onde as estruturas com 50% ou 75% de luminosidade podem ser usadas. O fornecimento de 20 L cova-1 de esterco bovino pode ser adotado como quantitativo no preparo de covas de pitaya, nas condições de clima e solo de Bom Jesus-PI.

Fruit production in Chile: bright past, uncertain future

In 2007 (the last agricultural census), Chile had 308, 445 ha of fruit orchards: an increase of almost 32% from the previous census (1997). The most important species were table grapes (20%), avocados (13%) and apples (12%). Some 22% of the fruit crops growing area corresponded to juvenile orchards; within the species with higher proportion of juvenile orchards were prunes (42%) and blueberries (56%). Most orchards are located between latitude 27º18` S (Copiapó) and 40º36´S (Puerto Varas). The industry is driven by the export component which accounts for more than 50% of the fruits produced. In the crop season 2009-2010, approximately 254 million boxes (around 2.5 million tons) were exported, representing over US$ 3.5 million. Processed and fresh fruits represented 8.2 and 26.7% of the total forest and agricultural Chilean exports in 2008, respectively. The main markets for this fruits were USA/Canada (42%) and Europe (32%). The fruit grower receives, on average, 12-16% of the total price of the fruit in its final destination. Each year the fruit industry employs 450.000 people directly, of which 1/3 are permanent. Even though the fruit industry employs the highest proportion of the agricultural labor and the growing area has increased in the last 20 years, the proportion of agricultural employment has decreased from 19.5% in 1989 to 10.8% in 2008. It might also be noted that Chile invests only 0.7% of the GDP in research. In the last 40 years, the fruit industry has been a motor for the Chilean economic development, but the lower rates of currency exchange, the rising costs of energy (oil, electricity), and the increasing scarcity of hand labor have drastically reduced the profitability and are putting at risk the viability of a large proportion of the fruit orchards in Chile. It is estimated that this season around 65% of the orchards will have a negative economic balance in their operations. Higher investment in research, improvements in fruit quality and various orchard management practices, as well as higher financial support from the Government are needed for the long term viability of the fruit industry in Chile.