76 resultados para Output variables


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The reproductive success of the oriental peach moth was evaluated in four experiments: 1) assessment of the mating duration, fecundity, fertility and longevity of females paired with virgin and immediately mated males; 2) mating duration, spermatophore size, fecundity, fertility and longevity in females paired with virgin and up to four times mated males; 3) receptivity of females to additional copulations after mating with virgin or mated males, and the effects of this behavior in female fecundity, fertility and longevity; 4) influence of insects age in the reproductive output. Males (33%) could copulate immediately after a previous copula. They were fertile until the fourth mating, but only in the first copula they transferred the longest (1.43 ± 0.10 mm) and widest (0.83 ± 0.11 mm) spermatophore, presenting the fastest mating duration (34.8 ± 2.62 min). A high proportion of females copulated by non-virgin males (84%) was receptive to other copulas, in comparison to those copulated by virgin males (32.4%). However, the fecundity, fertility, and longevity were similar among females that copulate once or more. The age was the most important factor affecting reproductive variables, where one and three day old insects had a significant higher fecundity, fertility and presented a shorter mating duration in comparison with older individuals. Results pointed out that the reproductive capacity of Grapholita molesta changes a little with respect to the analyzed factors, highlighting the elevated biotic potential of the species.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El objetivo de este trabajo fue desarrollar una ecuación de regresión que permitiese estimar el rendimiento (Y) del plátano Hartón (Musa AAB subgrupo plátano cv. Hartón), con la relación entre el Índice de Balance de Nutrientes DRIS (IBN-DRIS) (X1) y el número de hojas de la planta madre (X2). Usando un muestreo completamente al azar, se colectaron 398 muestras de tejido foliar. Se obtuvo la ecuación: Y = 30,351** - 8,644** log X1 + 0,27502*X2, con R² de 0,6206***, con distribución normal de los residuos. Pudo demostrarse que con la misma se puede predecir el rendimiento potencial de cualquier plantación del plátano Hartón en el área de estudio.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A conceptual framework for crop production efficiency was derived using thermodynamic efficiency concept, in order to generate a tool for performance evaluation of agricultural systems and to quantify the interference of determining factors on this performance. In Thermodynamics, efficiency is the ratio between the output and input of energy. To establish this relationship in agricultural systems, it was assumed that the input energy is represented by the attainable crop yield, as predicted through simulation models based on environmental variables. The method of FAO's agroecological zones was applied to the assessment of the attainable sugarcane yield, while Instituto Brasileiro de Geografia e Estatística (IBGE) data were used as observed yield. Sugarcane efficiency production in São Paulo state was evaluated in two growing seasons, and its correlation with some physical factors that regulate production was calculated. A strong relationship was identified between crop production efficiency and soil aptitude. This allowed inferring the effect of agribusiness factors on crop production efficiency. The relationships between production efficiency and climatic variables were also quantified and indicated that solar radiation, annual rainfall, water deficiency, and maximum air temperature are the main factors affecting the sugarcane production efficiency.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this work was to perform a quantitative analysis of the amino acid composition of soybean seeds as affected by climatic variables during seed filling. Amino acids were determined from seed samples taken at harvest in 31 multi-environment field trials carried out in Argentina. Total amino acids ranged from 31.69 to 49.14%, and total essential and nonessential amino acids varied from 12.83 to 19.02% and from 18.86 to 31.15%, respectively. Variance components expressed as the percentage of total variation showed that the environment was the most important source of variation for all traits, followed by the genotype x environment interaction. Significant explanatory linear regressions were detected for amino acid content regarding: average daily mean air temperature and cumulative solar radiation, during seed filling; precipitation minus potential evapotranspiration, during the whole reproductive period; and the combinations of these climatic variables. Each amino acid behaves differently according to environmental conditions, indicating compensatory effects among them.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El objetivo de este trabajo fue utilizar el análisis de componentes principales y de semivarianza para seleccionar variables físicas que explicaran la variabilidad de un suelo aluvial, y establecer el comportamiento espacial de las variables seleccionadas, con el fin de definir técnicamente la localización de parcelas experimentales para estudiar los efectos de la abrasividad del suelo sobre el desgaste de herramientas agrícolas. Las pruebas de campo se realizaron en 2008, en un lote plano de 6.000 m² con suelos de textura media a pesada (Vertic Haplustepts). Se hizo un muestreo intensivo en cuadrícula de 10x14 m. Las variables que mayor peso tuvieron en los tres primeros componentes principales fueron los contenidos de limo, arena fina y media, gravilla media, la humedad a capacidad de campo y el coeficiente higroscópico. A excepción de la arena media y la capacidad de campo, las demás propiedades presentaron alta dependencia espacial y su distribución mostró que en el lote experimental se encuentran tres sectores de acumulación diferencial de limo y de arena fina. La combinación de los análisis de componentes principales y geoestadística permitió definir las propiedades del suelo involucradas en el desgaste de herramientas, su patrón espacial y la manera más adecuada de distribuir parcelas experimentales, para estudiar la abrasividad del suelo.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this work was to develop and validate linear regression models to estimate the production of dry matter by Tanzania grass (Megathyrsus maximus, cultivar Tanzania) as a function of agrometeorological variables. For this purpose, data on the growth of this forage grass from 2000 to 2005, under dry‑field conditions in São Carlos, SP, Brazil, were correlated to the following climatic parameters: minimum and mean temperatures, degree‑days, and potential and actual evapotranspiration. Simple linear regressions were performed between agrometeorological variables (independent) and the dry matter accumulation rate (dependent). The estimates were validated with independent data obtained in São Carlos and Piracicaba, SP, Brazil. The best statistical results in the development and validation of the models were obtained with the agrometeorological parameters that consider thermal and water availability effects together, such as actual evapotranspiration, accumulation of degree‑days corrected by water availability, and the climatic growth index, based on average temperature, solar radiation, and water availability. These variables can be used in simulations and models to predict the production of Tanzania grass.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this work was to estimate the genetic diversity of improved banana diploids using data from quantitative analysis and from simple sequence repeats (SSR) marker, simultaneously. The experiment was carried out with 33 diploids, in an augmented block design with 30 regular treatments and three common ones. Eighteen agronomic characteristics and 20 SSR primers were used. The agronomic characteristics and the SSR were analyzed simultaneously by the Ward-MLM, cluster, and IML procedures. The Ward clustering method considered the combined matrix obtained by the Gower algorithm. The Ward-MLM procedure identified three ideal groups (G1, G2, and G3) based on pseudo-F and pseudo-t² statistics. The dendrogram showed relative similarity between the G1 genotypes, justified by genealogy. In G2, 'Calcutta 4' appears in 62% of the genealogies. Similar behavior was observed in G3, in which the 028003-01 diploid is the male parent of the 086079-10 and 042079-06 genotypes. The method with canonical variables had greater discriminatory power than Ward-MLM. Although reduced, the genetic variability available is sufficient to be used in the development of new hybrids.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this work was to assess the degree of multicollinearity and to identify the variables involved in linear dependence relations in additive-dominant models. Data of birth weight (n=141,567), yearling weight (n=58,124), and scrotal circumference (n=20,371) of Montana Tropical composite cattle were used. Diagnosis of multicollinearity was based on the variance inflation factor (VIF) and on the evaluation of the condition indexes and eigenvalues from the correlation matrix among explanatory variables. The first model studied (RM) included the fixed effect of dam age class at calving and the covariates associated to the direct and maternal additive and non-additive effects. The second model (R) included all the effects of the RM model except the maternal additive effects. Multicollinearity was detected in both models for all traits considered, with VIF values of 1.03 - 70.20 for RM and 1.03 - 60.70 for R. Collinearity increased with the increase of variables in the model and the decrease in the number of observations, and it was classified as weak, with condition index values between 10.00 and 26.77. In general, the variables associated with additive and non-additive effects were involved in multicollinearity, partially due to the natural connection between these covariables as fractions of the biological types in breed composition.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper presents and classifies the cognitive and metacognitive variables involved in the processes that students execute in problem solving. Moreover, it shows how these variables affect the students success in problem solving. These variables are classified in: piagetian and neo-piagetian, representational, metacognitive and transfer of learning. In the first group of variables it is discussed formal reasoning ability and other neo-piagetian factors. In the second group of variables it is analysed mental models and external representations. Implications for chemistry education are collected as a proposal of didactic strategies in the classroom.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Analytical curves are normally obtained from discrete data by least squares regression. The least squares regression of data involving significant error in both x and y values should not be implemented by ordinary least squares (OLS). In this work, the use of orthogonal distance regression (ODR) is discussed as an alternative approach in order to take into account the error in the x variable. Four examples are presented to illustrate deviation between the results from both regression methods. The examples studied show that, in some situations, ODR coefficients must substitute for those of OLS, and, in other situations, the difference is not significant.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Phase transition and viscosity behavior of emulsified systems were studied after modifying their physicochemical formulation. Effects of concentration and nature of salts and n-alcohols, and water/oil relation on the rheological properties of emulsions were also studied. Pre-equilibrated systems were emulsified according to an agitation procedure, and the viscosity (cP) was measured at different shear rates ranging from 1 to 300 s-1. The phase behavior, as well as the emulsion type based on electrolytic conductivity, was observed. Several interpretations of the flow and viscosity curves of emulsions were made through the estimation of rheological parameters such as consistency index "k" and behavior index "n".

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Risk analysis of climate change on plant diseases has great importance for agriculture since it allows the evaluation of management strategies to minimize future damages. This work aimed to simulate future scenarios of coffee rust (Hemileia vastatrix) epidemics by elaborating geographic distribution maps using a model that estimates the pathogen incubation period and the output from three General Circulation Models (CSIRO-Mk3.0, INM-CM3.0, and MIROC3.2.medres). The climatological normal from 1961-1990 was compared with that of the decades 2020s, 2050s and 2080s using scenarios A2 and B1 from the IPCC. Maps were prepared with a spatial resolution of 0.5 × 0.5 degrees of latitude and longitude for ten producing states in Brazil. The climate variables used were maximum and minimum monthly temperatures. The maps obtained in scenario A2 showed a tendency towards a reduction in the incubation period when future scenarios are compared with the climatological normal from 1961-1990. A reduction in the period was also observed in scenario B1, although smaller than that in scenario A2.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

ABSTRACT Climatic conditions stimulates the cambial activity of plants, and cause significant changes in trunk diameter growth and wood characteristics. The objective of this study was to evaluate the influence of climate variables in the diameter growth rate of the stem and the wood density of Eucalyptus grandis trees in different classes of the basal area. A total of 25 Eucalyptus trees at 22 months of age were selected according to the basal area distribution. Dendrometer bands were installed at the height of 1.30 meters (DBH) to monitor the diameter growth every 14 days, for 26 months. After measuring growth, the trees were felled and wood discs were removed at the DBH level to determine the radial density profile through x-ray microdensitometry and then re-scale the average values every 14 days. Climatic variables for the monitoring period were obtained and grouped every 14 days. The effect of the climate variables was determined by maximum and minimum growth periods in assessing trunk growth. These growth periods were related with precipitation, average temperature and relative air humidity. The re-scaled wood density values, calculated using the radial growth of the tree trunks measured accurately with steel dendrometers, enabled the determination of the relationship of small changes in wood density and the effect of the climatic variations and growth rate of eucalyptus tree trunks. A high sensitivity of the wood density to variation in precipitation levels was found.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The increasing demand of consumer markets for the welfare of birds in poultry house has motivated many scientific researches to monitor and classify the welfare according to the production environment. Given the complexity between the birds and the environment of the aviary, the correct interpretation of the conduct becomes an important way to estimate the welfare of these birds. This study obtained multiple logistic regression models with capacity of estimating the welfare of broiler breeders in relation to the environment of the aviaries and behaviors expressed by the birds. In the experiment, were observed several behaviors expressed by breeders housed in a climatic chamber under controlled temperatures and three different ammonia concentrations from the air monitored daily. From the analysis of the data it was obtained two logistic regression models, of which the first model uses a value of ammonia concentration measured by unit and the second model uses a binary value to classify the ammonia concentration that is assigned by a person through his olfactory perception. The analysis showed that both models classified the broiler breeder's welfare successfully.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The fuzzy logic admits infinite intermediate logical values between false and true. With this principle, it developed in this study a system based on fuzzy rules, which indicates the body mass index of ruminant animals in order to obtain the best time to slaughter. The controller developed has as input the variables weight and height, and as output a new body mass index, called Fuzzy Body Mass Index (Fuzzy BMI), which may serve as a detection system at the time of livestock slaughtering, comparing one another by the linguistic variables "Very Low", "Low", "Average ", "High" and "Very High". For demonstrating the use application of this fuzzy system, an analysis was made with 147 Nellore beeves to determine Fuzzy BMI values for each animal and indicate the location of body mass of any herd. The performance validation of the system was based on a statistical analysis using the Pearson correlation coefficient of 0.923, representing a high positive correlation, indicating that the proposed method is appropriate. Thus, this method allows the evaluation of the herd comparing each animal within the group, thus providing a quantitative method of farmer decision. It was concluded that this study established a computational method based on fuzzy logic that mimics part of human reasoning and interprets the body mass index of any bovine species and in any region of the country.