Preparação de LiNbO3 e LiNbO3:Eu3+ pelo método dos precursores poliméricos

The ferroelectric compound LiNbO3 was prepared by the polymeric precursors method in the polycrystalline form containing different concentrations of Eu3+. The compounds were characterized by X-ray diffraction, vibrational and electronic spectroscopy. Electronic spectroscopy was shown to be sensitive to small concentrations of contaminating phases allowing a good control of the compound purity. The presence of Eu3+ ions leads to the formation of the LiNb3O8 phase in the range of 500 to 800 °C. Above this temperature range LiNbO3 and tetragonal (T') EuNbO4 were obtained.

Preparación y caracterización de la zeolita MCM-22 y de su precursor laminar

The layered precursor of MCM-22 was prepared with different Si/Al ratios: 15, 25, 50, 100 and ¥. Upon heat treatment these precursors form MCM-22 zeolite. Both layered precursor and MCM-22 zeolite were characterized by several techniques: Chemical Analysis by Atomic Absorption Spectroscopy (AAS), X-Ray Diffraction (XRD), Thermo-gravimetric Analysis (TGA), Pore Analysis by N2 and Ar adsorption, Scanning Electron Microscopy (SEM), Infrared Spectroscopy (IR) and Temperature Programmed Desorption of ammonium (TPD).

Estudo de efeito dos sais precursores sobre as propriedades eletrocatalíticas de eletrodos de Ti-SnO2/Sb preparados por decomposição térmica

The physical and electrochemical properties of Ti-SnO2/Sb electrodes obtained by the thermal decomposition of solutions of the precursor salts SnCl2×2H2O/SbCl3 and SnSO4/Sb2(SO4)3 were investigated. The reversibility of the cyclic voltammetric response of the Fe(CN)6(4-)/Fe(CN)6(3-) redox couple was assessed using the obtained electrodes. Their catalytic activity for the oxygen-evolving reaction and maximum capacity for electronic transfer were also evaluated by potential and current linear scans in 0.5 mol L-1 H2SO4. Additionally, scanning electron microscopy analyses allowed the visualization of the morphology of the oxide films obtained. The best results were presented by the electrodes obtained from the chloride salt precursors.

Um procedimento simples e barato para a construção de um equipamento "dip-coating" para deposição de filmes em laboratório

In this work we show how to build a piece of equipment for depositing thin films by the dip-coating process, using inexpensive components easily found on the market. This equipment allows us to control the dipping and pulling velocity at which the substrate is put in the film precursor solution, two very important parameters for obtain thin films. This article discusses the construction of the mechanical and electric parts of the equipment, a simple method to interface it to a computer and the development of the software to control the dip-coating parameters.

Adsorção de aminoácidos sobre minerais e a origem da vida

Minerals adsorb more readily amino acids with charged R groups than those with uncharged R groups, so that the incorporation of amino acids with charged R groups into peptides would be more frequent than that of amino acids with uncharged R groups. However, 74% of the amino acids in the proteins of modern organisms contain uncharged R groups. Thus, what could have been the mechanism that produced peptides/proteins with more amino acids with uncharged R groups than precursors with charged R groups? The lipid world offers an alternative view of the origin of life. In the present paper, several other mechanisms are also discussed.

Efeito do processo de descafeinação com diclorometano sobre a composição química dos cafés arábica e robusta antes e após a torração

The decaffeinated coffee market has been expanding increasingly in the last years. During decaffeination, aroma precursors and bioactive compounds may be extracted. In the present study we evaluate the changes in the chemical composition of C. arabica and C. canephora produced by decaffeination using dichloromethane. A significant change in the chemical composition of both C. arabica and C. canephora species was observed, with differences between species and degrees of roasting. Major changes were observed in sucrose, protein and trigonelline contents after decaffeination. Changes in the levels of total chlorogenic acids and in their isomers distribution were also observed. Lipids and total carbohydrates were not affected as much. The sensory and biological implications of these changes need to be investigated.

Alquilbenzeno sulfonato linear: uma abordagem ambiental e analítica

The environmental impact of detergents and other consumer products is behind the continued interest in the chemistry of the surfactants used. Of these, linear alkylbenzene sulfonates (LASs) are most widely employed in detergent formulations. The precursors to LASs are linear alkylbenzenes (LABs). There is also interest in the chemistry of these hydrocarbons, because they are usually present in commercial LASs (due to incomplete sulfonation), or form as one of their degradation products. Additionally, they may be employed as molecular tracers of domestic waste in the aquatic environment. The following aspects are covered in the present review: The chemistry of surfactants, in particular LAS; environmental impact of the production of LAS; environmental and toxicological effects of LAS; mechanisms of removal of LAS in the environment, and methods for monitoring LAS and LAB, the latter in domestic wastes. Classical and novel analytical methods employed for the determination of LAS and LAB are discussed in detail, and a brief comment on detergents in Brazil is given.

Uma nova síntese de alfa-bromo-acetofenonas e sua aplicação na obtenção de 2-benzoil-benzofuranas

alpha-Bromoacetophenones are important in organic synthesis. They have been widely used as precursors of several natural products. Several methods of bromination aiming at their synthesis have been described, however they furnish a mixture of starting material 10, mono 8 and dibromide 11 products. We developed a novel, simple and efficient synthesis of these compounds with applications in the synthesis of benzoylbenzofurans 9, compounds with important pharmacological properties, such as the ability of dilating the coronary artery and analgesic action. Such compounds have also been used as key intermediates to obtain quinone systems.

Síntese e caracterização de um novo complexo de platina (IV) a partir de seu análogo de platina (II) utilizando iodo molecular como agente oxidante: uma rota sintética interessante para obtenção de novos complexos de platina

In an attempt to reduce toxicity and widen the spectrum of activity of cisplatin and its analogues, much attention has been focused on designing new platinum complexes. This work reports the synthesis and characterization of novel compounds of the platinum (II) and platinum (IV) containing 2-furoic hydrazide acid and iodide as ligands. Although the prepared compounds do not present the classical structure of biologically active platinum analogues, they could be potentially active or useful as precursors to prepare antitumor platinum complexes. The reported compounds were characterized by ¹H NMR, 13C NMR, 195Pt NMR, IR and elemental analyses.

Síntese, caracterização e avaliação catalítica de Vo x/Mg yAlo x na reação de decomposição do isopropanol

Vanadium oxide supported on hydrotalcite-type precursors was studied in the decomposition of isopropanol. Hydrotalcite-type compounds with different y = Mg+2/Al+3 ratios were synthesized by the method of coprecipitating nitrates of Mg+2 and Al+3 cations with K2CO3 as precipitant. The X-ray diffraction patterns of Al-rich hydrotalcite precursors showed the presence of crystalline phases of brucite and gibbsite. It was shown that chemical composition, texture, acid-base properties of the active sites and also Mg/Al ratio strongly affect the formation of the products in the oxidation of isopropanol. The Al-rich catalysts were much more active than the Mg-rich ones, converting isopropanol mainly to propylene.

Preparação e caracterização de blendas de quitosana/poli(álcool vinílico) reticuladas quimicamente com glutaraldeído para aplicação em engenharia de tecido

In this study, novel Chitosan/PVA based films were chemically crosslinked by glutaraldehyde, under pH=(4,00 ±0,05), in order to achieve structures tailored for wound tissue engineering applications. Both precursors and developed films were characterized by FTIR, SEM and XRD in order to determine the presence of chemicals groups and nanostructural order, respectively. The results have shown that the glutaraldehyde crosslinking have altered the crystallinity of pure chitosan and the increase on the C=N bands and simultaneous decrease on NH2 bands suggested that Chitosan/GA crosslinking has preference to occur in carbon-2 of the saccharide ring by the Schiff's base reaction. Also, FTIR spectroscopy clearly showed that crosslinking has also taken place with blends of PVA and chitosan. The mechanical properties presented high degree dependence with on the increase of the content of chitosan and glutaraldehyde. The results have indicated that, by controlling the ratio [PVA]/[chitosan] in the blends and the extent of chemical crosslinking, it was possible to tailor the hybrid network produced aiming to obtain properties of interest for the specific application.

Efeito da composição das correntes do conversor das unidades de FCC no desempenho catalítico de aditivos DESOx

Hydrotalcite-like compounds having Mg partially replaced by Cu or Mn were prepared and used as precursors for two mixed oxides (Cu-OM50 and Mn-OM50) that were evaluated for SOx removal in the presence of O2, NO and CO. Under SO2/O2 reaction system, SOx removal was slightly higher over Cu-OM50. The addition of CO and NO to the feed markedly hindered the SO2 oxidation over Cu-OM50 while no significant effect was observed for Mn-OM50. For the regeneration step, the use of propane instead of H2 reduces regeneration capacity, mainly for Cu-OM50. Mn-OM50 was less affected by the feed composition, suggesting that it was a promising additive for SOx removal.

Efeito da adição de precursores na produção de alcaloide anticancerígeno usando a técnica de planejamento experimental

The effect of precursors on the anticancer alkaloid production by submerged fermentation using M. anisopliae 3935 was studied, according to complete experimental design 2² with three central points. The results showed that lysine was the most important variable, however, when both lysine and glucose were added to the fermentation medium, the alkaloid production reached, approximately, 17 mg L-1 after 120 hours of fermentation. Then, the scale-up of the process was carried out and these results were confirmed. Finally, 35 mg L-1 of alkaloid at 192 h were attained after increment of added aminoacid lysine.

Preparação de carbonos porosos por moldagem sequencial

Porous carbons have received great attention because of their potential use as adsorbents, sensors, catalytic supports and others. Among the available methods for preparing these solids, the sequential templating emerges as an efficient way to tail carbon materials, with large specific surface areas, high porosity, controlled narrow pore size distribution and different functional groups. The template process is based on the infiltration of carbon precursors into the pores of inorganic frameworks. This work reviews the most important variables involved in the sequential template process to prepare micro, meso and macroporous carbon with tailored properties as well as their applications.

Contaminação de produtos de higiene e cosméticos por n-nitrosaminas

N-nitrosamines are carcinogenic compounds that have been found during the last three decades in a variety of consumer products, including cosmetic and personal care products, and their raw materials. These compounds are formed from amine precursors and nitrosating agents present in the formulations. This paper reviews the formation and occurrence of N-nitrosamines in cosmetic products, as well as presents considerations about analytical, toxicological and regulatory aspects.