The role of population movement in the epidemiology and control of schistosomiasis in Brazil: a preliminary typology of population movement

This paper examines recent developments in migration studies. It reviews literature related to the potential role of internal population movement in the occurrence of schistosomiasis in Brazil and modifies Prothero's typology of population movement for use in Brazil. This modified classification system may contribute to a better understanding of schistosome transmission as well as improved research and control programs. The results of this study indicate that population movement in Brazil primarily involves economically-motivated rural-urban and interregional movement. However, several movement patterns have become increasingly important in recent years as a result of changing socioeconomic and urbanisation dynamics. These patterns include urban-urban, intracity and urban-rural movement as well as the movement of environmental refugees and tourists. Little is known about the epidemiological significance of these patterns. This paper also highlights the role of social networks in the decision to migrate and to settle. Prothero's classic population movement typology categorises movement as either one-way migrations or circulations and examines them along spatial and temporal scales. However, the typology must be modified as epidemiological information about new patterns becomes available. This paper identifies areas that require further research and offers recommendations that can improve the measurement and spatial analysis of the relationship between population movement and schistosomiasis.

Reaching for the Holy Grail: insights from infection/cure models on the prospects for vaccines for Trypanosoma cruziinfection

Prevention of Trypanosoma cruzi infection in mammals likely depends on either prevention of the invading trypomastigotes from infecting host cells or the rapid recognition and killing of the newly infected cells byT. cruzi-specific T cells. We show here that multiple rounds of infection and cure (by drug therapy) fails to protect mice from reinfection, despite the generation of potent T cell responses. This disappointing result is similar to that obtained with many other vaccine protocols used in attempts to protect animals from T. cruziinfection. We have previously shown that immune recognition ofT. cruziinfection is significantly delayed both at the systemic level and at the level of the infected host cell. The systemic delay appears to be the result of a stealth infection process that fails to trigger substantial innate recognition mechanisms while the delay at the cellular level is related to the immunodominance of highly variable gene family proteins, in particular those of the trans-sialidase family. Here we discuss how these previous studies and the new findings herein impact our thoughts on the potential of prophylactic vaccination to serve a productive role in the prevention of T. cruziinfection and Chagas disease.

Sharing competences in strategic alliances: a case study of the Cosan and Shell biofuel venture

In a competitive world, the way a firm establishes its organizational arrangements may determine the enhancement of its core competences and the possibility of reaching new markets. Firms that find their skills to be applicable in just one type of market encounter constraints in expanding their markets, and through alliances may find a competitive form of value capture. Hybrid forms of organization appear primarily as an alternative to capturing value and managing joint assets when the market and hierarchy modes do not present any yields for the firm's competitiveness. As a result, this form may present other challenging issues, such as the allocation of rights and principal-agent problems. The biofuel market has presented a strong pattern of changes over the last 10 years. New intra-firm arrangements have appeared as a path to participate or survive among global competition. Given the need for capital to achieve better results, there has been a consistent movement of mergers and acquisitions in the Biofuel sector, especially since the 2008 financial crisis. In 2011 there were five major groups in Brazil with a grinding capacity of more than 15 million tons per year: Raízen (joint venture formed by Cosan and Shell), Louis Dreyfus, Tereos Petrobras, ETH, and Bunge. Major oil companies have implemented the strategy of diversification as a hedge against the rising cost of oil. Using the alliance of Cosan and Shell in the Brazilian biofuel market as a case study, this paper analyses the governance mode and challenging issues raised by strategic alliances when firms aim to reach new markets through the sharing of core competences with local firms. The article is based on documentary research and interviews with Cosan's Investor Relations staff, and examines the main questions involving hybrid forms through the lens of the Transaction Cost Economics (TCE), Agency Theory, Resource Based View (RBV), and dynamic capabilities theoretical approaches. One focal point is knowledge "appropriability" and the specific assets originated by the joint venture. Once the alliance is formed, it is expected that competences will be shared and new capabilities will expand the limits of the firm. In the case studied, Cosan and Shell shared a number of strategic assets related to their competences. Raízen was formed with economizing incentives, as well to continue marshalling internal resources to enhance the company's presence in the world energy sector. Therefore, some challenges might be related to the control and monitoring agents' behavior, considering the two-part organism formed by distinctive organizational culture, tacit knowledge, and long-term incentives. The case study analyzed illustrates the hybrid arrangement as a middle form for organizing the transaction: neither in the market nor in the hierarchy mode, but rather a more flexible commitment agreement with a strategic central authority. The corporate governance devices are also a challenge, since the alignment between the parent companies in the joint ventures is far more complex. These characteristics have led to an organism with bilateral dependence, offering favorable conditions for developing dynamic capabilities. However, these conditions might rely on the partners' long-term interest in the joint venture.

Adaptations of two specialist herbivores to movement on the hairy leaf surface of their host, Solanum guaraniticum Hassl (Solanaceae)

Plant trichomes can difficult the attachment and movement of small insects. Here, we examine the hypothesis that the success on the use of densely haired hosts by two cassidine species is determined by differential morphology and behavior. Larvae of Gratiana graminea (Klug, 1829) and Gratiana conformis (Boheman, 1854) move on the leaf surface of their host, Solanum guaraniticum Hassl by anchoring their tarsungulus on the trichome rays or by inserting the tarsungulus tip directly into epidermis. This kind of movement is only possible due to a similar tarsungulus shape among the species. Tarsungulus growth pattern is also similar between species, being relatively small on the posterior aperture, matching the diameter of the host plant trichome rays. The tarsungulus shape associated with differences on ontogenetic growth and attachment pattern allow these two Cassidinae larvae to efficiently move on the pubescent leaf surface of their host.

A universal microscope manipulator

A modified and improved model of a mechanical manipulator for observation of pinned and mounted insects is described. This device allows movement of the observed object around three perpendicular axes in the field of vision at all magnifications of stereomicroscopes. The main improvement of this new model is positioning of the guiding knobs for rotating around two of the axes next to each other, allowing faster and easier manipulation of the studied object. Thus, one of the main advantages of this device is the possibility to rotate the specimen without the need to refocus. The device enables easily reaching a precession deviation in the intersection point of axes up to 0.5 mm in the process of assembling.

Is Drosophila nasuta Lamb (Diptera, Drosophilidae) currently reaching the status of a cosmopolitan species?

ABSTRACT In early March 2015, three males and two females of one unknown species of Drosophila were collected from a compost pile and some garbage cans in the west region of the city of São Paulo, state of São Paulo, Brazil. Morphologically it is easily identified by the presence of the following conspicuous features: a brownish dorsal stripe along pleura, an entirely iridescent silvery-whitish frons when seen directly from the front, and a row of cuneiform setae on anteroventral side of femur of foreleg; the former two traits being more evident in males. The species was easily reared in a modified banana-agar medium and two isofemale lines were established allowing to obtain mitotic cells showing a diploid chromosome number of 2n = 8. Based both on morphological and chromosomal features, in addition to the geographical distribution, we concluded that the unknown flies belong to Drosophila nasuta Lamb, 1914, a tropical species of the nasuta subgroup of the Drosophila immigrans species group. Photomicrographs of male imagines, terminalia, mitotic and meiotic metaphase plates, as well as of female mitotic metaphase, are included.

Modeling water movement in horizontal columns using fractal theory

Fractal mathematics has been used to characterize water and solute transport in porous media and also to characterize and simulate porous media properties. The objective of this study was to evaluate the correlation between the soil infiltration parameters sorptivity (S) and time exponent (n) and the parameters dimension (D) and the Hurst exponent (H). For this purpose, ten horizontal columns with pure (either clay or loam) and heterogeneous porous media (clay and loam distributed in layers in the column) were simulated following the distribution of a deterministic Cantor Bar with fractal dimension H" 0.63. Horizontal water infiltration experiments were then simulated using Hydrus 2D software. The sorptivity (S) and time exponent (n) parameters of the Philip equation were estimated for each simulation, using the nonlinear regression procedure of the statistical software package SAS®. Sorptivity increased in the columns with the loam content, which was attributed to the relation of S with the capillary radius. The time exponent estimated by nonlinear regression was found to be less than the traditional value of 0.5. The fractal dimension estimated from the Hurst exponent was 17.5 % lower than the fractal dimension of the Cantor Bar used to generate the columns.

Erosão em entre sulcos em área cultivada com cana crua e queimada sob colheita manual e mecanizada

Embora existam vários estudos ligados às questões ambientais voltadas para a poluição atmosférica, ao uso crescente da biotecnologia e à mecanização do processo de colheita da cana-de-açúcar, a mesma atenção não tem sido dada aos impactos ambientais negativos promovidos pela erosão laminar. O presente trabalho teve como objetivo avaliar a concentração de matéria orgânica (MO) e nutrientes (P, K, Ca e Mg) em sedimentos e na água da enxurrada proveniente de erosão entre sulcos em diferentes sistemas de manejo na colheita da cana-de-açúcar utilizados no Estado de Mato Grosso do Sul (cana crua e queimada), sob um Latossolo Vermelho distrófico de textura média. Os tratamentos estudados foram colheita manual de cana queimada, colheita mecanizada de cana crua e colheita mecanizada de cana queimada. Aplicou-se chuva simulada com intensidade de 60 mm h-1, durante 50 min. As concentrações de sedimentos na enxurrada resultantes da erosão entre sulcos, bem como de MO, P, K, Ca e Mg, foram maiores no sistema com colheita mecanizada de cana queimada e menores no sistema com colheita mecanizada de cana crua. A qualidade física do solo sofre influência negativa do sistema de manejo com colheita mecânica de cana queimada, devido ao efeito da pressão exercida pelo tráfego de máquinas na colheita. No entanto, os resíduos vegetais de colheita distribuídos na superfície do solo pela colheita mecânica de cana crua reduzem as perdas de nutrientes e de MO no sedimento, além de aumentarem a capacidade do solo em resistir à degradação física ocasionada pelo tráfego de máquinas na colheita mecanizada de cana.

PRODUÇÃO DE UM MAPA PEDOLÓGICO ASSOCIANDO TÉCNICAS COMUNS AOS MAPEAMENTOS DIGITAIS DE SOLOS COM DELINEAMENTO MANUAL DE UNIDADES DE MAPEAMENTO

A produção de mapas pedológicos por meio de técnicas do mapeamento digital de solos (MDS) pode ser dificultada pela falta de mapas pedológicos tradicionais de referência. Nessas situações, o conhecimento tácito do mapeador pode ser usado para o delineamento manual das unidades de mapeamento (UMs) a partir de geração de um mapa de ocorrência de tipos de solos preditos pelo MDS. Os objetivos deste estudo foram avaliar e comparar mapas de solos gerados por dois métodos, um denominado “MDS direto”, em que foi gerado um mapa preditor de UMs com base no modelo estabelecido com informações provenientes de um mapa pedológico convencional de referência preexistente, e outro em que o modelo preditor foi estabelecido a partir do exame de atributos morfológicos de 193 perfis de solo para identificar os tipos de solos, gerando-se um mapa com a indicação de ocorrência de tipos de solos sobre o qual foi realizado o delineamento manual das UMs, com base em mudanças das feições da superfície do solo. As predições foram feitas usando árvores de classificação Simple Cart,correlacionando oito variáveis do terreno com a ocorrência de UMs identificadas com nomes de classes de solos do Sistema Brasileiro de Classificação de Solos. A acurácia dos mapas foi avaliada pela “verdade de campo” (verificação em campo do tipo de solo ocorrente e comparação com o previsto no mapa) e pela concordância dos mapas gerados com o mapa de referência. Quando avaliado pela “verdade de campo”, a acurácia do mapa gerado pelo método MDS direto foi de 74 %, enquanto a acurácia do mapa de MDS com delineamento manual foi de 79 %. Os dois métodos apresentaram resultados satisfatórios; o método que usou o delineamento manual e a identificação em alguns locais dos tipos de solo no campo apresentou a vantagem de não necessitar de mapas pedológicos de referência para o treinamento dos modelos preditores.

Potassium supply to cotton roots as affected by potassium fertilization and liming

Cotton (Gossypium hirsutum) is known to have a high requirement for K and to be very sensitive to low soil pH. Most of K reaches plant roots by diffusion in the soil. As K interacts with Ca and Mg, liming can interfere in K movement in the soil, affecting eventually the plant nutrition. The objective of this work was to study the effect of dolomitic lime and 0, 15, 30, 45 and 60 g kg-1 of K on the supply of K to cotton roots. Cotton plants were grown up to 40 days in 5 L pots containing a Dark Red Latosol (Typic Haplusthox) with 68% and 16% of sand and clay, respectively. There was an increase in dry matter yields and in K accumulation due to K fertilization. Root interception of soil K was also increased by K application, but was not affected by lime. Mass flow and diffusion increased linearly with K levels up to 60 mg kg-1, in pots with lime. In pots without lime the amount of K reaching the roots by diffusion increased up to 45 mg kg-1, but decreased at the highest K level. Accordingly, there was more K reaching the roots through mass flow at the highest K level. This happened because there were more fine roots in pots without lime, at the highest K level. As the roots grew closer, there was a stronger root competition leading to a decrease in the amount of K diffused to cotton roots.

Genetic variability of rice recurrent selection populations as affected by male sterility or manual recombination

The objective of this work was to determine the effect of male sterility or manual recombination on genetic variability of rice recurrent selection populations. The populations CNA-IRAT 4, with a gene for male sterility, and CNA 12, which was manually recombined, were evaluated. Genetic variability among selection cycles was estimated using14 simple sequence repeat (SSR) markers. A total of 926 plants were analyzed, including ten genitors and 180 individuals from each of the evaluated cycles (1, 2 and 5) of the population CNA-IRAT 4, and 16 genitors and 180 individuals from each of the cycles (1 and 2) of CNA 12. The analysis allowed the identification of alleles not present among the genitors for both populations, in all cycles, especially for the CNA-IRAT 4 population. These alleles resulted from unwanted fertilization with genotypes that were not originally part of the populations. The parameters of Wright's F-statistic (F IS and F IT) indicated that the manual recombination expands the genetic variability of the CNA 12 population, whereas male sterility reduces the one of CNA-IRAT 4.

Flight movement and spatial distribution of immunomarked thrips in onion, potato, and tomato

The objective of this work was to evaluate the spatial distribution of thrips in different crops, and the correlation between meterological parameters and the flight movements of this pest, using immunomarking. The experiment was conducted in cultivated areas, with tomato (Solanum lycopersicum), potato (Solanum tuberosum), and onion (Allium cepa); and non-cultivated areas, with weedy plants. The areas with tomato (100 days), potato (20 days), and weeds were sprayed with casein, albumin, and soy milk, respectively, to mark adult thrips; however, the areas with onion (50 days) and tomato (10 days) were not sprayed. Thrips were captured with georeferenced blue sticky traps, transferred into tubes, and identified by treatment area with the Elisa test. The dependence between the samples and the capture distance was determined using geostatistics. Meteorlogical parameters were correlated with thrips density in each area. The three protein types used for immunomarking were detected in different proportions in the thrips. There was a correlation between casein-marked thrips and wind speed. The thrips flew a maximum distance of 3.5 km and dispersed from the older (tomato) to the younger crops (potato). The immunomarking method is efficient to mark large quantities of thrips.

Polinização natural, manual e autopolinização no pegamento de frutos de pinheira (Annona squamosa L.) em Alagoas

A pinheira (Annona squamosa L) é cultivada no Estado do Alagoas há mais de um século, sendo a principal cultura de valor econômico para centenas de pequenos agricultores. Um dos principais entraves para melhorar a produtividade da cultura é o baixo índice de polinização das flores e a conseqüente produção de frutos. Embora sejam morfologicamente perfeitas, as flores da pinheira apresentam dicogamia protogínica, fenômeno no qual a maturação dos carpelos acontece antes da maturação dos estames, inviabilizando a autofecundação. O presente trabalho objetivou estudar o efeito da polinização natural, manual e da autopolinização no número de frutos fixados em pinheiras. Foram utilizadas plantas de 4 anos de idade oriundas de pés-francos da variedade local "Crioula". As flores foram selecionadas na porção média das árvores em toda a sua circunferência. Foram utilizados os seguintes tratamentos: flores em polinização natural; flores cobertas para induzir a autopolinização; flores polinizadas com pincel usando pólen puro; flores polinizadas com pincel usando 75 % de pólen e 25 % de amido de milho; flores polinizadas com pincel usando 50 % de pólen e 50 % de amido de milho; flores polinizadas com pincel usando 25 % de pólen e 75 % de amido de milho; flores polinizadas com bomba usando pólen puro; flores polinizadas com bomba usando 75 % de pólen e 25 % de amido de milho; flores polinizadas com bomba usando 50 % de pólen e 50 % de amido de milho; flores polinizadas com bomba usando 25 % de pólen e 75 % de amido de milho. Os resultados obtidos mostraram que o uso da polinização artificial com pincel ou com bomba polinizadora aumentou em até 10 vezes o número de frutos fixados em polinização natural ou em autopolinização. A adição do amido de milho seco como veículo para o pólen não reduziu a percentagem de frutos fixados e pode ser utilizado em até 50% da mistura sem reduzir a eficiência na polinização com pincel e em até 75% com bomba.