67 resultados para Linear array


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Adsorption of Cu(II), Ni(II), Pb(II) and Zn(II) ions from aqueous solutions by N-(3,4-dihydroxybenzyl) chitosan have been carried out. The Langmuir (L), Freundlich (F), Langmuir - Freundlich (LF), Redlich-Peterson (RP) and Tóth (T) adsorption isotherms models have been applied to fit the experimental data. Nonlinear regression computational program "Enzefitte", which is a library of the more commonly used adsorption isotherm equations for obtaining tabular outuput suitable for plotting theoretical of fitted isotherms, has been used to estimate the adsorption parameters. These parameters were used to calculate the amount adsorbed q calc., a function of concentration (C).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this paper a methodology for the computation of Raman scattering cross-sections and depolarization ratios within the Placzek Polarizability Theory is described. The polarizability gradients are derived from the values of the dynamic polarizabilities computed at the excitation frequencies using ab initio Linear Response Theory. A sample application of the computational program, at the HF, MP2 and CCSD levels of theory, is presented for H2O and NH3. The results show that high correlated levels of theory are needed to achieve good agreement with experimental data.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The environmental impact of detergents and other consumer products is behind the continued interest in the chemistry of the surfactants used. Of these, linear alkylbenzene sulfonates (LASs) are most widely employed in detergent formulations. The precursors to LASs are linear alkylbenzenes (LABs). There is also interest in the chemistry of these hydrocarbons, because they are usually present in commercial LASs (due to incomplete sulfonation), or form as one of their degradation products. Additionally, they may be employed as molecular tracers of domestic waste in the aquatic environment. The following aspects are covered in the present review: The chemistry of surfactants, in particular LAS; environmental impact of the production of LAS; environmental and toxicological effects of LAS; mechanisms of removal of LAS in the environment, and methods for monitoring LAS and LAB, the latter in domestic wastes. Classical and novel analytical methods employed for the determination of LAS and LAB are discussed in detail, and a brief comment on detergents in Brazil is given.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A rapid HPLC analytical method was developed and validated for the determination of the N-phenylpiperazine derivative LASSBio-579in plasma rat. Analyses were performed using a C18 column and elution with 20 mM sodium dihydrogen phosphate monohydrate - methanol. The analyte was monitored using a photodiode array detector (257 nm). Calibration curves in spiked plasma were linear over the concentration range of 0.3-8 mg/mL with determination coefficient > 0.99. The lower limit of quantification was 0.3 mg/mL. The applicability of the HPLC method for pharmacokinetic studies was tested using plasma samples obtained after administration of LASSBio-579 to Wistar rats, showing the specificity of the method.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Gas chromatography coupled with mass spectrometry (GC-MS) is widely used for the characterization of volatile compounds. However, due to the complexity of the soluble coffee matrix, a complete identification of the components should not be based on mass spectra interpretation only. The linear index of retention (LRI) is frequently used to give support to mass spectra. The aim of this work is to investigate the characterization of the volatile compounds in soluble coffee samples by GC-MS using LRI values found with a HP-INNOWAX column. The method used allows a significant increase of the reliability of identifying compounds.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Tucker-3 model offers several advantages for analysis of environmental data but its interpretation is still challenging. A Tucker-3 model was applied to a biodegradation experiment involving a large number of overlapped chromatographic peaks and a temporal variation. The Tucker-3 model allowed the data to be decomposed in two processes: evaporation and biodegradation. The results suggest that linear hydrocarbons were those biodegraded first and demonstrate that the data analysis can be simplified by interpreting the elements of the core array. The approach discussed in this work can be applied in similar problems involving multi-way data in other areas of chemistry.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A comparative study of a convergent and the linear synthetic pathway with respect to their relative greenish allowed the quantification of the advantages of the former with respect to atomic productivity as well as robustness. The calculations show that convergent pathways provide a decrease of costs together with a decrease of E factor and an increase of atomic economy which means that greenish is accompanied by an economic advantage. The influence of other features of the convergent pathways synthesis on the improvement of the synthesis greenish is discussed qualitatively.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This technical note describes the construction of a low-cost optical detector. This device is composed by a high-sensitive linear light sensor (model ILX554) and a microcontroller. The performance of the detector was demonstrated by the detection of emission and Raman spectra of the several atomic systems and the results reproduce those found in the literature.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A simple, RP-HPLC method was established for determining moxifloxacin and ketorolac in pharmaceutical formulations. Moxifloxacin, ketorolac and their degradation products were separated using C8 column with methanol and phosphate buffer pH 3.0 (55:45 v/v) as the mobile phase. Detection was performed at 243 nm using a diode array detector. The method was validated using ICH guidelines and was linear in the range 20-140 µg mL-1 for both analytes. Good separation of both the analytes and their degradation products was achieved using this method. The developed method can be applied successfully for the determination of moxifloxacin and ketorolac.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The nonlinear analysis of a general mixed second order reaction was performed, aiming to explore some basic tools concerning the mathematics of nonlinear differential equations. Concepts of stability around fixed points based on linear stability analysis are introduced, together with phase plane and integral curves. The main focus is the chemical relationship between changes of limiting reagent and transcritical bifurcation, and the investigation underlying the conclusion.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This article presents a discussion on light diffraction by slits and grids as well as the development of an experimental apparatus which provides quantitative observation of the phenomenon. We conducted a brief historical survey on the evolution of the wave theory of light and the role of diffraction in the context of optical spectroscopy. We also reviewed the use of Huygens’ principle to calculate the intensity pattern obtained when light is diffracted by slits and compared the predictions with experimental results obtained using the apparatus developed. Finally, the use of the apparatus in an optical spectroscopy experiment was demonstrated.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Em geral, a função de um modelo de impedância para processos de eletrodo simples é deduzida de um modelo elétrico equivalente, denominado circuito de Randles. Neste trabalho estudou-se a generalização dessa função, mediante a introdução de um parâmetro não-elétrico, relacionado com a flexibilidade do ângulo de fase e da magnitude. A função foi ajustada às medidas experimentais de impedância obtidas de um sistema constituído de uma liga Ti-10%Al (m/m) em solução de cloreto de sódio 0,9%, variando-se a amplitude de perturbação. Verificou-se que a função generalizada foi adequada para descrever a impedância do sistema analisado, reduzindo as distorções entre a curva experimental e a curva teórica. Além disso, os melhores resultados foram obtidos para sinais de perturbação do sistema com amplitude igual a 10 mV.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O principal objetivo deste trabalho foi avaliar, com a ajuda da Programação Inteira, as conseqüências do uso da Programação Linear com posterior arredondamento das respostas, com ênfase na regulação de florestas eqüiâneas. Para isto, um problema de regulação florestal simplificado foi idealizado e resolvido pelo modelo I, por meio de Programação Linear, Programação Linear com posterior arredondamento e Programação Inteira. Ao final, concluiu-se que o arredondamento das respostas obtidas pelo modelo resolvido por Programação Linear levou a uma solução inviável para o problema de regulação proposto. O mesmo não ocorreu com o modelo de Programação Inteira, que apresentou um plano de regulação factível e otimizado, mostrando que, do ponto de vista matemático, respostas com arredondamento da solução de modelos de Programação Linear não devem ser adotadas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A fragmentação florestal de origem antrópica é um dos resultados do processo desordenado de uso e ocupação do solo, especialmente em paisagens intensamente cultivadas. Neste contexto, o presente trabalho objetivou definir áreas prioritárias, para favorecer a conectividade entre os fragmentos florestais, visando ações de recuperação florestal na Bacia do Rio Pardo, SP, utilizando a abordagem multicriterial denominada Combinação Linear Ponderada.Na definição dos critérios e, posteriormente, dos pesos de fatores, empregou-se a Técnica Participatória. Os fatores considerados importantes ao objetivo do trabalho foram: proximidade entre fragmentos de maior área nuclear, proximidade da cobertura florestal, proximidade da rede hidrográfica, distância aos centros urbanos, declividade, erodibilidade do solo. Considerando que as variáveis que interferem na escolha de áreas prioritárias à restauração florestal na Bacia do Rio Pardo-SP contribuem com pesos diferenciados no processo final de decisão, estabeleceu-se uma hierarquia, de acordo com a importância de cada fator para a aptidão da área. O fator de maior peso foi proximidade entre fragmentos de maior área nuclear (0,3713), seguido de proximidade da cobertura florestal (0,1911), proximidade da rede hidrográfica (0,1516), distância aos centros urbanos (0,1168), declividade (0,0840) e erodibilidade (0,0854).O resultado obtido foi um mapa de áreas prioritárias, com cinco graus de prioridade. A priorização de áreas ocorreu de maneira a promover, primeiro a união dos fragmentos de floresta com maior área nuclear e, a partir dessa união, a sucessiva expansão dessas regiões de prioridade muito alta tendendo a muito baixa. A metodologia mostrou-se adequada ao mapeamento de áreas prioritárias à restauração florestal, em bacias hidrográficas. Uma vez que fragmentos com maiores áreas nucleares sejam conectados com fragmentos pequenos, onde estes são predominantes na paisagem, estes promoverão a formação de fragmentos maiores a partir da formação de corredores florestais e da recomposição da vegetação.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A seleção de pulverizadores agrícolas que se adaptem às necessidades da propriedade, é um processo trabalhoso, sendo uma das etapas mais importantes dentro do processo produtivo. O objetivo do presente trabalho foi o de desenvolver e utilizar um modelo de programação linear para auxiliar na seleção de pulverizadores agrícolas de barras, baseado no menor custo horário do equipamento. Foram utilizadas as informações técnicas referentes a 20 modelos de pulverizadores disponíveis no mercado, sendo quatro autopropelidos, oito de arrasto e oito do tipo montado. A análise de sensibilidade dos componentes dos custos operacionais mostrou que as taxas de reparo e depreciação foram os fatores que mais interferiram na variação do custo horário do conjunto trator-pulverizador. O modelo matemático desenvolvido facilitou a realização da análise de sensibilidade que foi processada em um tempo muito pequeno.