Habitat suitability of Anopheles vector species and association with human malaria in the Atlantic Forest in south-eastern Brazil

Every year, autochthonous cases of Plasmodium vivax malaria occur in low-endemicity areas of Vale do Ribeira in the south-eastern part of the Atlantic Forest, state of São Paulo, where Anopheles cruzii and Anopheles bellator are considered the primary vectors. However, other species in the subgenus Nyssorhynchus of Anopheles (e.g., Anopheles marajoara) are abundant and may participate in the dynamics of malarial transmission in that region. The objectives of the present study were to assess the spatial distribution of An. cruzii, An. bellator and An. marajoara and to associate the presence of these species with malaria cases in the municipalities of the Vale do Ribeira. Potential habitat suitability modelling was applied to determine both the spatial distribution of An. cruzii, An. bellator and An. marajoara and to establish the density of each species. Poisson regression was utilized to associate malaria cases with estimated vector densities. As a result, An. cruzii was correlated with the forested slopes of the Serra do Mar, An. bellator with the coastal plain and An. marajoara with the deforested areas. Moreover, both An. marajoara and An. cruzii were positively associated with malaria cases. Considering that An. marajoara was demonstrated to be a primary vector of human Plasmodium in the rural areas of the state of Amapá, more attention should be given to the species in the deforested areas of the Atlantic Forest, where it might be a secondary vector.

Appraisal of Phlebotomus argentipes habitat suitability using a remotely sensed index in the kala-azar endemic focus of Bihar, India

Visceral leishmaniasis, or kala-azar, is recognised as a serious emerging public health problem in India. In this study, environmental parameters, such as land surface temperature (LST) and renormalised difference vegetation indices (RDVI), were used to delineate the association between environmental variables and Phlebotomus argentipes abundance in a representative endemic region of Bihar, India. The adult P. argentipes were collected between September 2009-February 2010 using the hand-held aspirator technique. The distribution of P. argentipes was analysed with the LST and RDVI of the peak and lean seasons. The association between environmental covariates and P. argentipes density was analysed a multivariate linear regression model. The sandfly density at its maximum in September, whereas the minimum density was recorded in January. The regression model indicated that the season, minimum LST, mean LST and mean RDVI were the best environmental covariates for the P. argentipes distribution. The final model indicated that nearly 74% of the variance of sandfly density could be explained by these environmental covariates. This approach might be useful for mapping and predicting the distribution of P. argentipes, which may help the health agencies that are involved in the kala-azar control programme focus on high-risk areas.

Ovipositing behaviour of Compsobracon mirabilis (Szépligeti) (Hymenoptera, Braconidae) in a cerrado habitat, southeastern Brazil

The oviposition behaviour of the braconid parasitoid, Compsobracon mirabilis ( Szépligeti, 1901) is described. Observations were conducted in a cerrado region located in Três Marias, Minas Gerais, Brazil. The oviposition occurred in a branch of Alibertia concolor (Cham.) K. Schum. 1889 (Rubiaceae), inside of which there were thirteen larvae of an unidentified species of Lepidoptera.

Ocupação diferencial do habitat por vespas do gênero Trypoxylon (Trypargilum) Latreille (Hymenoptera, Crabronidae)

Vespas do gênero Trypoxylon apresentam comportamento solitário e aprovisionam seus ninhos de forma massiva com aranhas paralisadas. Algumas espécies utilizam cavidades preexistentes para nidificação, o que facilita sua amostragem e estudo. Neste trabalho, dados sobre a biologia de nidificação de quatro espécies de Trypoxylon (Trypargilum) - T. rogenhoferi, T. lactitarse, T. aurifrons e T. nitidum - são apresentados. As espécies foram amostradas por meio de ninhos-armadilha durante três anos em Araras e dois anos em Rifaina e São Carlos (São Paulo). As localidades de estudo foram subdivididas em sítios de amostragem. Foram obtidos 2.698 ninhos de himenópteros solitários, dos quais 2.268 foram fundados por espécies de Trypoxylon. Intensa atividade de nidificação foi observada principalmente na estação quente e chuvosa (outubro-março). Os ninhos-armadilha utilizados para nidificação pelas diferentes espécies apresentaram dimensões significativamente diferentes. A família de aranhas mais utilizada para aprovisionamento foi Araneidae; no entanto, as espécies de vespas diferiram quanto às espécies forrageadas. O principal parasitóide das quatro espécies foi Melittobia, mas indivíduos das famílias Chrysididae, Ichneumonidae, Chalcididae e Sarcophagidae também foram verificados. Observou-se que as espécies de Trypoxylon coexistem temporalmente e que nas três localidades cada espécie nidificou com maior freqüência em um sítio particular, sugerindo uma ocupação diferencial do habitat. A partição do habitat aparentemente homogêneo pode ser resultado de "competição aparente" mediada por inimigos naturais comuns.

Efeito da estrutura de habitat sobre a abundância de parasitóides Pseudacteon Coquillett (Diptera, Phoridae) em ninhos de Solenopsis invicta Buren (Hymenoptera, Formicidae)

A influência de características do habitat na abundância dos parasitóides Pseudacteon Coquillett (Diptera, Phoridae) de Solenopsis invicta Buren (Hymenoptera, Formicidae) foi estudada em um agroecossistema orgânico diversificado no sudeste do Brasil. Os parasitóides foram coletados durante 30 minutos após a perturbação de ninhos da formiga lava-pé em áreas com culturas anuais ou perenes. Foram coletados no total 228 parasitóides de quatro espécies diferentes em 61,90% dos 84 ninhos da formiga lava-pé perturbados. Pseudacteon obtusus Borgmeier foi a espécie mais abundante (70 fêmeas), seguida por Pseudacteon litoralis Borgmeier (37 fêmeas), Pseudacteon tricuspis Borgmeier (23 fêmeas) e Pseudacteon solenopsidis Schmitz (1 fêmea). Pseudacteon litoralis foi mais freqüente em ninhos presentes nas culturas perenes que anuais enquanto que P. obtusus e P. tricuspis tiveram um padrão oposto. Correlações significativamente negativas foram encontradas para as abundâncias de P. litoralis e P. obtusus com a temperatura do ar. Houve correlação significativamente positiva entre a abundância dos parasitóides e o tamanho dos ninhos da formiga lava-pé. Considerando que os forídeos são importantes inimigos naturais de S. invicta, esse estudo fornece informações para o manejo de S. invicta em agroecossistemas tropicais diversificados.

What is the importance of open habitat in a predominantly closed forest area to the dung beetle (Coleoptera, Scarabaeinae) assemblage?

What is the importance of open habitat in a predominantly closed forest to the dung beetle assemblage? The Atlantic Forest in Brazil is one of the most highly disturbed ecosystems and is mainly represented by fragmented areas. However, in places where human disturbances have ceased, certain areas are showing a natural regeneration pattern. The aim of the present study was to determine how the dung beetle assemblage responds to distinct habitat structures in a fragment of Atlantic Forest. For such, open and closed forest areas were sampled in a fragment of the Atlantic Forest in the northeastern region of Brazil. Pitfall traps baited with excrement and carrion were used to collect the beetles. A total of 7,267 individuals belonging to 35 species were captured. Canthon chalybaeus and C. mutabilis were restricted to open areas. Nearly 90% of the individuals of C. aff. simulans and Deltochilum aff. irroratum were identified in these areas. A higher percentage (> 50%) of Canthon staigi, Dichotomius aff. depressicolis and D. aff. sericeus occurred in closed areas. Abundance differed between areas, with higher values in closed areas. Richness was not influenced by the habitat structure. NMDS ordination exhibited the segregation of areas and ANOSIM confirmed that this variable explained the assemblage of dung beetle species. The findings of the present study validate that open areas are associated to more restrictive conditions, limiting a higher abundance of dung beetle. Although situated near preserved fragments, the studied open areas increase the heterogeneity of the general landscape.

Percevejos predadores (Orius spp.) (Hemiptera: Anthocoridade) e tripes (Thysanoptera): interação no mesmo habitat?

O gênero Orius Wolff é composto por espécies de percevejos predadores, principalmente de tripes, encontradas em muitos ecossistemas naturais e manejados. Entretanto, as interações que podem ocorrer entre esses predadores e suas presas no mesmo "habitat" não são bem conhecidas entre as espécies das regiões tropicais. Este estudo teve como objetivo registrar a interação de espécies de Orius e de tripes coletadas na mesma planta, ou seja, presentes no mesmo "habitat". As coletas foram feitas em várias plantas cultivadas, no campo e em casas de vegetação e em plantas invasoras. A forma e o grau de associação entre as espécies foram determinados, utilizando-se o coeficiente de Spearman (R), calculado com dados de presença/ausência das espécies (Orius e tripes) no mesmo "habitat". Orius insidiosus (Say) foi encontrado associado positivamente aos tripes Frankliniella sp., Neohydatothrips sp. e Haplothrips gowdeyi (Franklin) e negativamente associado a Frankliniella schultzei (Trybom) e Caliothrips phaseoli (Hood). Orius thyestes Herring e Orius sp1 ocorreram simultaneamente em 10 espécies de tripes sem, contudo, apresentar associação significativa, enquanto Orius perpunctatus (Reuter) esteve associado positivamente às espécies Frankliniella sp. e Neohydatothrips sp. e, negativamente, a Frankliniella gemina (Moulton).

Sugarcane stems as larval habitat for the stable fly (Stomoxys calcitrans) in sugarcane plantations

Outbreaks of stable fly, Stomoxys calcitrans, cause losses for livestock producers located near sugarcane mills in Brazil, especially in southern Mato Grosso do Sul. The sugarcane mills are often pointed by local farmers as the primary source of these outbreaks; some mills also joined the farmers in combating the flies. Brazilian beef cattle production has great economic importance in similar level to bio-fuel production as ethanol. In this context, the wide-ranging knowledge on the biology and ecology of the stable fly, including larval habitats and their reproduction sites is extremely important for further development of control programs. This paper aims to report the occurrence and development of S. calcitrans larvae inside sugarcane stems in three municipalities of Mato Grosso do Sul. The sugarcane stems give protection against bad weather conditions and insecticide application. In this way, for sustainable sugarcane growth specific research concerning this situation should be conducted.

Geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral finite elements with reduced integration

This work presents a geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral isoparametric elements. The main features of the present formulation are: (a) the element matrices are obtained using reduced integrations with hourglass control; (b) an explicit Taylor-Galerkin scheme is used to carry out the dynamic analysis, solving the corresponding equations of motion in terms of velocity components; (c) the Truesdell stress rate tensor is used; (d) the vector processor facilities existing in modern supercomputers were used. The results obtained are comparable with previous solutions in terms of accuracy and computational performance.

Application of the finite element method in cold forging processes

The demand for more efficient manufacturing processes has been increasing in the last few years. The cold forging process is presented as a possible solution, because it allows the production of parts with a good surface finish and with good mechanical properties. Nevertheless, the cold forming sequence design is very empirical and it is based on the designer experience. The computational modeling of each forming process stage by the finite element method can make the sequence design faster and more efficient, decreasing the use of conventional "trial and error" methods. In this study, the application of a commercial general finite element software - ANSYS - has been applied to model a forming operation. Models have been developed to simulate the ring compression test and to simulate a basic forming operation (upsetting) that is applied in most of the cold forging parts sequences. The simulated upsetting operation is one stage of the automotive starter parts manufacturing process. Experiments have been done to obtain the stress-strain material curve, the material flow during the simulated stage, and the required forming force. These experiments provided results used as numerical model input data and as validation of model results. The comparison between experiments and numerical results confirms the developed methodology potential on die filling prediction.

An alternative finite element formulation for determination of streamlines in two-dimensional problems

It is well known that the numerical solutions of incompressible viscous flows are of great importance in Fluid Dynamics. The graphics output capabilities of their computational codes have revolutionized the communication of ideas to the non-specialist public. In general those codes include, in their hydrodynamic features, the visualization of flow streamlines - essentially a form of contour plot showing the line patterns of the flow - and the magnitudes and orientations of their velocity vectors. However, the standard finite element formulation to compute streamlines suffers from the disadvantage of requiring the determination of boundary integrals, leading to cumbersome implementations at the construction of the finite element code. In this article, we introduce an efficient way - via an alternative variational formulation - to determine the streamlines for fluid flows, which does not need the computation of contour integrals. In order to illustrate the good performance of the alternative formulation proposed, we capture the streamlines of three viscous models: Stokes, Navier-Stokes and Viscoelastic flows.

Plant species and habitat structure in a sand dune field in the brazilian Caatinga: a homogeneous habitat harbouring an endemic biota

One dune habitat in the semi-arid Caatinga Biome, rich in endemisms, is described based on plant species composition, woody plant density, mean height and phenology and a multivariate analysis of the micro-habitats generated by variables associated to plants and topography. The local flora is composed mainly by typically sand-dweller species of Caatinga, suggesting the existence of a phytogeographic unity related to the sandy areas in the Caatinga biome, which seems to be corroborated by faunal distribution. Moreover, some species are probably endemic from the dunes, a pattern also found in vertebrates. The plant distribution is patchy, there is no conspicuous herbaceous layer and almost 50% of the ground represents exposed sand. Phenology is not synchronized among species, occurring leaves budding and shedding, flowers development and anthesis, fruits production and dispersion both in rainy and dry seasons. Leaf shedding is low compared to the level usually observed in Caatinga areas and about 50% of the woody individuals were producing leaves in both seasons. Spectrum of dispersal syndromes shows an unexpected higher proportion of zoochorous species among the phanerophytes, accounting for 31.3% of the species, 78.7% of the total frequency and 78.6% of the total density. The habitat of the dunes is very simple and homogeneous in structure and most of environmental variance in the area is explained by one gradient of woody plants density and another of increase of Bromelia antiacantha Bertol. (Bromeliaceae) and Tacinga inamoena (K. Schum.) N.P. Taylor & Stuppy (Cactaceae) toward valleys, which seem to determine two kinds of protected micro-habitats for the small cursorial fauna.

Tropical inselbergs: habitat types, adaptive strategies and diversity patterns

Inselbergs are isolated rock outcrops that rise abruptly above the surrounding plains. Granitic and gneissic inselbergs are geologically and geomorphologically old and occur throughout a broad spectrum of climatic zones. They form microclimatically and edaphically dry growth sites that support a highly specialized vegetation. Based on physiognomic criteria a number of habitat types can be distinguished that are widespread on inselbergs (e.g. ephemeral flush vegetation, monocotyledonous mats, rock pools). Three hot spots of global inselberg plant diversity can be identified which are both rich in species and endemics: a) southeastern Brazil, b) Madagascar and c) southwestern Australia.

Habitat utilization and CAM occurrence among epiphytic bromeliads in a dry forest from southeastern Brazil

We studied the community and habitat occupation of epiphytes to understand how these plants cope with a supposedly stressful habitat: i) how general epiphytes occupy tree trunks, ii) how epiphytic bromeliads, occupy their supportive trees, iii) how CAM bromeliads are spatially distributed. The study was done in the dry forest of Jacarepiá, State of Rio de Janeiro. Data collection on epiphytes, phorophytes, and trees was based on the point-center quarter method. The photosynthetic pathway of the bromeliad species was determined using isotope ratio mass spectrometry. The presence of Gesneriaceae, Araceae, and Cactaceae indicates that some humidity is present in the area allowing the presence of supposedly less-specialized epiphytes. There was no correlation between epiphyte abundance and phorophyte diameter, and phorophytes had larger sizes than trees that do not host epiphytes. There was correlation between tree diameter and bromeliad abundance, and lack of correlation between diameter and bromeliad richness. Only one species was typical of the understorey and one was typical of the canopy, while intermediate heights were occupied by different species. The only C3 bromeliad species (Vriesea procera (Mart. ex Schult.f.) Wittm.) was significantly more exposed than the other species. If CAM occurrence is related to water economy, the fact that a C3 species is subjected to more exposed conditions is remarkable. Further comments are presented on the proportion between CAM bromeliad species and abundance in dry forest. Regarding life forms, holoepiphytes, as opposed to hemiepiphytes, showed not to be restricted by the phorophyte's diameter suggesting a more successful establishment of this life form.

Multicomponent diffusion during Prato cheese ripening: mathematical modeling using the finite element method

The partial replacement of NaCl by KCl is a promising alternative to produce a cheese with lower sodium content since KCl does not change the final quality of the cheese product. In order to assure proper salt proportions, mathematical models are employed to control the product process and simulate the multicomponent diffusion during the reduced salt cheese ripening period. The generalized Fick's Second Law is widely accepted as the primary mass transfer model within solid foods. The Finite Element Method (FEM) was used to solve the system of differential equations formed. Therefore, a NaCl and KCl multicomponent diffusion was simulated using a 20% (w/w) static brine with 70% NaCl and 30% KCl during Prato cheese (a Brazilian semi-hard cheese) salting and ripening. The theoretical results were compared with experimental data, and indicated that the deviation was 4.43% for NaCl and 4.72% for KCl validating the proposed model for the production of good quality, reduced-sodium cheeses.