99 resultados para Economical analisys
Resumo:
In this study, 331 samples from calves less than one month old from a dairy herd in the district of Piracanjuba, state of Goiás, Brazil were tested for rotavirus. Thirty-three samples (9.9%) tested positive for rotavirus. Out of those, 31 were submitted to G and P characterization by reverse transcription followed by semi-nested polymerase chain reaction. Two samples were characterized as G6P[1], three as G10P[11] and five as G6P[11]. The majority of the samples (51.6%) displayed multiple P genotypes (P-genotype mixtures), including typical human genotypes P[4] and P[6M], suggesting the occurrence of co-infections and genetic reassortment. Also, the detection of human genotypes in bovine samples may be considered evidence of the zoonotic potential of rotaviruses. To our knowledge, this is the first report of such a high frequency of P genotype mixtures in bovine rotavirus samples. It also increases data on G and P rotavirus genotypes circulating in dairy herds in Brazil and can help in the development of more efficient immunization approaches, thereby controlling infection and reducing economical losses.
Resumo:
Currently, it is accepted that there are three species that were formerly grouped under Candida parapsilosis: C. para- psilosis sensu stricto, Candida orthopsilosis, andCandida metapsilosis. In fact, the antifungal susceptibility profiles and distinct virulence attributes demonstrate the differences in these nosocomial pathogens. An accurate, fast, and economical identification of fungal species has been the main goal in mycology. In the present study, we searched sequences that were available in the GenBank database in order to identify the complete sequence for the internal transcribed spacer (ITS)1-5.8S-ITS2 region, which is comprised of the forward and reverse primers ITS1 and ITS4. Subsequently, an in silico polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) was performed to differentiate the C. parapsilosis complex species. Ninety-eight clinical isolates from patients with fungaemia were submitted for analysis, where 59 isolates were identified as C. parapsilosis sensu stricto, 37 were identified as C. orthopsilosis, and two were identified as C. metapsilosis. PCR-RFLP quickly and accurately identified C. parapsilosis complex species, making this method an alternative and routine identification system for use in clinical mycology laboratories.
The Brazilian policy for reduction of accidents and violence aligns with international perspectives?
Resumo:
The study analyzed The Brazilian Policy for Reduction of Morbidity and Mortality from Accidents and Violence, in the socio-political perspective. We used as a base the chapter “Violence: a global public health problem” from the World Report on Violence and Health. The analysis revealed convergent and divergent elements of the Brazilian Policy in comparison with the international perspectives. We verified that the Brazilian Policy tried to converge to the international policies, however: it emphasizes the health promotion actions, but are limited to the context and behavior of individuals and individual communities; the performance of health professionals is expected without providing more structural investments, as the improvement in work conditions, the increase of financial and material resources; there are few clear definitions of the government and economical sector responsibilities.
Resumo:
Although the criteria for defining erosion tolerance are well established, the limits generally used are not consistent with natural, economical and technological conditions. Rates greater than soil formation can be accepted only until a minimum of soil depth is reached, provided that they are not associated with environmental hazard or productivity losses. A sequence of equations is presented to calculate erosion tolerance rates through time. The selection of equation parameters permits the definition of erosion tolerance rates in agreement with environmental, social and technical needs. The soil depth change that is related to irreversible soil degradation can be calculated. The definition of soil erosion tolerance according to these equations can be used as a guideline for sustainable land use planning and is compatible with expert systems.
Resumo:
Mining in the State of Minas Gerais-Brazil is one of the activities with the strongest impact on the environment, in spite of its economical importance. Amongst mining activities, acid drainage poses a serious environmental problem due to its widespread practice in gold-extracting areas. It originates from metal-sulfide oxidation, which causes water acidification, increasing the risk of toxic element mobilization and water resource pollution. This research aimed to evaluate the acid drainage problem in Minas Gerais State. The study began with a bibliographic survey at FEAM (Environment Foundation of Minas Gerais State) to identify mining sites where sulfides occur. Substrate samples were collected from these sites to determine AP (acidity potential) and NP (neutralization potential). The AP was evaluated by the procedure of the total sulfide content and by oxygen peroxide oxidation, followed by acidity titration. The NP was evaluated by the calcium carbonate equivalent. Petrographic thin sections were also mounted and described with a special view to sulfides and carbonates. Based on the chemical analysis, the acid-base accounting (ABA) was determined by the difference of AP and NP, and the acid drainage potential obtained by the ABA value and the total volume of material at each site. Results allowed the identification of substrates with potential to generate acid drainage in Minas Gerais state. Altogether these activities represent a potential to produce between 3.1 to 10.4 billions of m³ of water at pH 2 or 31.4 to 103.7 billions of m³ of water at pH 3. This, in turn, would imply in costs of US$ 7.8 to 25.9 millions to neutralize the acidity with commercial limestone. These figures are probably underestimated because some mines were not surveyed, whereas, in other cases, surface samples may not represent reality. A more reliable state-wide evaluation of the acid drainage potential would require further studies, including a larger number of samples. Such investigations should consider other mining operations beyond the scope of this study as well as the kinetics of the acid generation by simulated weathering procedures.
Resumo:
The lychee is, all over the world, considered as the "queen of the fruits" due to the delicacy of its appearance and flavor. Although it was only recently that it started to have economical importance in Brazil, the lychee is already calling the attention of numerous farmers, mainly those who cultivate citric fruits and/or sugarcane in the State of São Paulo, due to the constant and at the same time growing necessity of finding new alternative crops. Considering that the commercial cultivation of lychee plants in the field requires the previous obtainment of rootstocks viewing to reduce the genetic variability and the length of the juvenile period displayed by plants resulting directly from the seeds, finding ways to improve the germination performance of lychee seeds for the production of rootstock plants is of considerable economic importance. Thus, the objective of this experiment was to test five substrates for the germination of lychee seeds: (1) vermiculite, (2) washed sand, (3) filter paper, (4) carbonized rice hull, and (5) sphagnum. The results showed that the period of time required by a lychee seed to germinate is a short one thus reinforcing the importance of providing a suitable substrate for the germination to take place. It was found that the substrates which apparently allowed the best combinations of water and oxygen availability for the seeds - washed sand and carbonized rice hull - were those leading to the fastest and highest germination values.
Resumo:
Chile has become a major actor in the blueberry industry as the most important supplier of off-season fresh fruit for the northern hemisphere. Blueberry exports passed from US$ 30 million (around 4,000 tons) in 2000 to US$ 380 million (94,000 tons) in 2011. The characteristics of the major blueberry growing regions (North, Central, South-central and South) are presented in terms of acreage, varieties, management practices, extension of the harvest season, and soil and climatic conditions. Most fruit is from highbush varieties, picked by hand and exported fresh by boat to United States. Largest proportion of fruit is exported from mid December to late January, which coincides with lowest prices. The south-central region (latitudes 34º50' to 38º15' S) was in 2007 the most important one with 5,075 ha (51.1% of area planted). Among the challenges for the Chilean blueberry industry in the near future are: 1. Lower profitability due to lower rates of currency exchange and higher costs, 2 - Greater scarcity and higher cost of labor, 3.- Need for higher productivity and sustainable production practices, 4- Fruit of high and consistent quality, and 5.- Greater investment in research. As a case study the article presents three approaches that can help identify areas with low availability of labor and improve its efficiency. The article shows the use of geomatic tools to establish labor availability, application of growth regulators to reduce crop load, increase fruit size and improve harvest efficiency, and the use of shakers to harvest fresh fruit for long distance markets. More research is needed to improve yields, reduce costs and give greater economical and ecological sustainability to the Chilean blueberry industry.
Resumo:
The main objective of this research was the characterization of the humic fractions isolated from vermicomposting, originating from cattle manure and treated with Eisenea foetida or Lumbricus rubellus, during 3 and 6 months. Elemental analysis and Infrared and UV-vis spectroscopy were used for their characterizations. The results obtained shown that both humic acids are very similar, but six-month humic acid shown lower percentage of organic material than three month humic acid. The spectroscopy analysis shown that the humic acid studied can be compared with other humic acids reported in the literature. By comparing both vermicomposts, the one produced in three months presents a great potential as fertilizer and it is more economical than the vermicompost produced during a six month period.
Resumo:
For economical and ecological reasons, synthetic chemists are confronted with the increasing obligation of optimizing their synthetic methods. Maximizing efficiency and minimizing costs in the production of molecules and macromolecules constitutes, therefore, one of the most exciting challenges of synthetic chemistry. The ideal synthesis should produce the desired product in 100% yield and selectivity, in a safe and environmentally acceptable process. In this highlight the concepts of atom economy, molecular engineering and biphasic organometallic catalysis, which address these issues at the molecular level for the generation of "green" technologies, are introduced and discussed.
Resumo:
The purpose of this work is to demonstrate the usefulness of low cost high performance computers. It is presented technics and software packages used by computational chemists. Access to high-performance computing power remains crucial for many computational quantum chemistry. So, this work introduces the concept of PC cluster, an economical computing plataform.
Resumo:
A new extraction method for sterols was tested in fruits of Ottonia martiana Miq., a shrub belonging to the family Piperaceae, popularly known as "anestésica" due to the use of its roots and aerial parts, in alcoholic preparations, in treatment of odontological problems. For this purpose, a portable extraction equipment was developed, to operate with liquified gases, which showed to be practical, fast and effective, besides being economical and ecological. In the chromatographic analysis of the extracts obtained in this equipment, it was demonstrated the presence of two sterols, isomers of b-sitosterol and stigmasterol.
Resumo:
A lab-made interface for acquisition of instrumental analog signals between 0 and 5 V at a frequency up to 670 kHz at the parallel port of a microcomputer is described. Since it uses few and small components, it was built into the connector of a printer parallel cable. Its performance was evaluated by monitoring the signals of four different instruments and similar analytical curves were obtained with the interface and from readings from the instrument' displays. Because the components are cheap (~U$35,00) and easy to get, the proposed interface is a simple and economical alternative for data acquisition in small laboratories for routine work, research and teaching.
Resumo:
Solid municipal waste contains a large volume of polymers and its final disposal is a serious environmental problem. Consequently, the recycling of the principal polymers present in the solid waste is an alternative. In this review we describe the mechanical and chemical recycling of polymers and the energy recovery from plastic wastes. Polymer recycling involves not only the development of processing technologies, but also the solution of many chemical and analytical problems. The technological, economical and social aspects of polymer recycling are also considered.
Resumo:
A microcontrolled, portable and inexpensive photometer is described. It uses six light-emitting diodes (LEDs) as radiation sources and a phototransistor as detector, as well as a microcontroller (PIC - Programmable Controller of Interruption). This device provided total autonomy to the proposed photometer, which was successfully applied to determination of Fe2+ in ferrous syrups and of seven clinical biochemical parameters. As the components are cheap (~U$30.00) and easy to find, the proposed photometer is an economical alternative for routine chemical analyses in small laboratories, for research and teaching. Being portable and microcontrolled, it allows doing field chemical analyses.
Resumo:
The Universities, in Brazil and all over the world are currently going through a "second revolution" in which the socio-economical development is incorporated as part of their mission and science and knowledge play a key role for the development of the society. In this context, this article is directed towards the importance of entrepreneurship and the formation of technological entrepreneurs in the area of chemistry, with special attention to the teaching of entrepreneurship in the chemistry courses and its effect on students, universities and the job possibilities. This article also presents a short discussion on a basic entrepreneurship course for chemists and some suggestions of reading on entrepreneurship to those interested in get started in this area. What is presented here about entrepreneurship in chemistry can be applied to any other area of science and technology.