Influence of male nutritional conditions on the performance and alimentary selection of wild females of Anastrepha obliqua (Macquart)(Diptera, Tephritidae)

Influence of male nutritional conditions on the performance and alimentary selection of wild females of Anastrepha obliqua (Macquart) (Diptera, Tephritidae). The behavior of A. obliqua females is regulated by endogenous and exogenous factors and among these the presence of males. Experiments were carried out to investigate whether the presence of males and their nutritional condition may affect the behavior of self-selection feeding and the performance of A. obliqua females. Females were sorted in groups containing yeast-deprived females and males, and non-yeast-deprived females and males. The females were maintained apart from the males by a transparent plastic screen. Several yeast and sucrose combinations were offered to the females in a single diet block or in separate blocks. Ingestion, egg production, longevity and diet efficiency were determined. The non-yeast-deprived males positively influenced the females performance when the latter were fed with yeast and sucrose in distinct diet blocks. Performance was better in the groups without males and with yeast-deprived males where the females could not select the nutrient proportions (yeast and sucrose in a single diet block).

Selection of artificial hosts for oviposition by wild Anastrepha obliqua (Macquart) (Diptera, Tephritidae): influence of adult food and effect of experience

Several factors influence the selection of oviposition substrates by insects. The aim of the present work was to find answers to the following questions related to the oviposition behavior of Anastrepha obliqua. Can carbohydrates (glucose or sucrose) present in the adult diet have influence on the female preference for an oviposition substrate with similar composition? Can the previous experience with a host containing one of mentioned carbohydrates interfere in further selection of oviposition substrates? The results showed that the kind of carbohydrate present in the adult diet did not affect the female preference for an artificial oviposition substrate, neither when it was presented by itself nor in combination with brewer's yeast. The effect of experience in the oviposition behavior was observed when there was a previous contact with artificial oviposition substrates containing yeast and sucrose. The data are discussed in terms of the behavioral plasticity presented by this species in relation to feeding and oviposition behaviors.

Influence of age and diet on the performance of Cephalonomia stephanoderis (Hymenoptera, Bethylidae) a parasitoid of the coffee berry borer, Hypothenemus hampei (Coleoptera, Curculionidae)

The importance of age and feeding on the performance of Cephalonomia stephanoderis (Hymenoptera, Bethylidae), a parasitoid of the coffee berry borer, Hypothenemus hampei (Coleoptera, Curculionidae) was investigated in the laboratory. Groups of female parasitoids were subject to the following treatments: a group fed during one, five and ten days after emergence of adults with coffee borer larvae; another group fed only with honey solution during five days after emergence; and as a control, a third group was kept without food for five days. At the end of each treatment, survivorship, parasitoid activity (walking and flying capacity in an arena), search capacity for finding coffee borer-infested berries, host feeding and oviposition (on immature hosts), were assessed. Unfed females showed a significant decrease in survivorship compared to individuals that were fed. The type of meal (insects or honey) did not significantly influence parasitoid activity, search and oviposition capacities. Females fed with honey solution significantly consumed less immature coffee borers. Younger females (one day old) walked and flew out of the arena significantly faster than older ones (5 and 10 days old). Implications of these results are discussed on the performance of C. stephanoderis as a biological control agent of the coffee berry borer.

Survey of potential sharpshooter and spittlebug vectors of Xylella fastidiosa to grapevines at the São Francisco River Valley, Brazil

Survey of potential sharpshooter and spittlebug vectors of Xylella fastidiosa to grapevines at the São Francisco River Valley, Brazil. Pierce's disease of grapevines, caused by Xylella fastidiosa, is a serious problem in some regions of North America, not yet reported in Brazil. In this study, a survey of potential sharpshooter (Hemiptera, Cicadellidae, Cicadellinae) and spittlebug (Hemiptera, Cercopidae) vectors of X. fastidiosa was conducted in vineyards at the São Francisco River Valley, a major grape growing region in Brazil. Four vineyards of Vitis vinifera L. were sampled fortnightly from June/2005 to June/2007, using yellow sticky cards, each placed at two different heights (45 cm aboveground and 45 cm above the crop canopy) in 10 sampling localities. A total of 4,095 specimens of sharpshooters were collected, nearly all from 3 Proconiini species, Homalodisca spottii Takiya, Cavichioli & McKamey, 2006 (96.8% of the specimens), Tapajosa fulvopunctata (Signoret, 1854) (3.1%), and Tretogonia cribrata Melichar, 1926 (1 specimen). Hortensia similis (Walker, 1851) (2 specimens) was the only Cicadellini species. Only 1 cercopid specimen, belonging to Aeneolamia colon (Germar, 1821), was trapped. Even though they are not considered potential Xylella vectors, 2 Gyponini leafhoppers were collected: Curtara samera DeLong & Freytag, 1972 (11 specimens) and Curtara inflata DeLong & Freytag, 1976 (1 specimen). Homalodisca spottii was observed feeding and mating on green branches of grapevines, in addition to egg masses. Because of its prevalence on the crop canopy, occurrence throughout the year (with peaks from February to August), and ability to colonize grapevines, H. spottii could be an important vector if a X. fastidiosa strain pathogenic to grapevines becomes introduced at the São Francisco River Valley.

Aggregate stability as affected by short and long-term tillage systems and nutrient sources of a hapludox in southern Brazil

The ability of a soil to keep its structure under the erosive action of water is usually high in natural conditions and decreases under frequent and intensive cultivation. The effect of five tillage systems (NT = no-till; CP = chisel plowing and one secondary disking; CT = primary and two secondary distings; CTb = CT with crop residue burning; and CTr = CT with removal of crop residues from the field), combined with five nutrient sources (C = control, no nutrient application; MF = mineral fertilizers according to technical recommendations for each crop; PL = 5 Mg ha-1 y-1 fresh matter of poultry litter; CM = 60 m³ ha-1 y-1 slurry cattle manure; and SM = 40 m³ ha-1 y-1 slurry swine manure) on wet-aggregate stability was determined after nine years (four sampled soil layers) and on five sampling dates in the 10th year (two sampled soil layers) of the experiment. The size distribution of the air-dried aggregates was strongly affected by soil bulk density, and greater values of geometric mean diameter (GMD AD) found in some soil tillage or layer may be partly due to the higher compaction degree. After nine years, the GMD AD on the surface was greater in NT and CP compared to conventional tillage systems (CT, CTb and CTr), due to the higher organic matter content, as well as less soil mobilization. Aggregate stability in water, on the other hand, was affected by the low variation in previous gravimetric moisture of aggregates, which contributed to a high coefficient of variation of this attribute. The geometric mean diameter of water-stable aggregates (GMD WS) was highest in the 0.00-0.05 m layer in the NT system, in the layers 0.05-0.10 and 0.12-0.17 m in the CT, and values were intermediate in CP. The stability index (SI) in the surface layers was greater in treatments where crop residues were kept in the field (NT, CP and CT), which is associated with soil organic matter content. No differences were found in the layer 0.27-0.32 m. The effect of nutrient sources on GMD AD and GMD WS was small and did not affect SI.

Chemical and physical properties of organic residues

Due to human activity, large amounts of organic residue are generated daily. Therefore, an adequate use in agricultural activities requires the characterization of the main properties. The chemical and physical characterization is important when planning the use and management of organic residue. In this study, chemical and physical properties of charcoal, coffee husk, pine-bark, cattle manure, chicken manure, coconut fiber, sewage sludge, peat, and vermiculite were determined. The following properties were analyzed: N-NH4+, N-N0(3)-, and total concentrations of N, P, S, K, Ca, Mg, Mn, Zn, Cu, and B, as well as pH, Electrical Conductivity (EC) and bulk density. Coffee husk, sewage sludge, chicken manure and cattle manure were generally richer in nutrients. The EC values of these residues were also the highest (0.08 - 40.6 dS m-1). Peat and sewage sludge had the highest bulky density. Sodium contents varied from 0 to 4.75 g kg-1, with the highest levels in chicken manure, cattle manure and sewage sludge. Great care must be taken when establishing proportions of organic residues in the production of substrates with coffee husk, cattle or chicken manure or sewage sludge in the calculation of the applied fertilizer quantity in crop fertilization programs.

Tillage systems and nutrient sources affecting soil cover, temperature and moisture in a clayey oxisol under corn

Tillage affects soil physical properties, e.g., porosity, and leads to different amounts of mulch on the soil surface. Consequently, tillage is related to the soil temperature and moisture regime. Soil cover, temperature and moisture were measured under corn (Zea mays) in the tenth year of five tillage systems (NT = no-tillage; CP = chisel plow and single secondary disking; CT = primary and double secondary disking; CTb = CT with crop residues burned; and CTr = CT with crop residues removed). The tillage systems were combined with five nutrient sources (C = control; MF = mineral fertilizer; PL = poultry litter; CS = cattle slurry; and SS = swine slurry). Soil cover after sowing was greatest in NT (88 %), medium in CP (38 %) and lowest in CT treatments (< 10 %), but differences decreased after corn emergence. Soil temperature was related with soil cover, and significant differences among tillage were observed at the beginning of the growing season and at corn maturity. Differences in soil temperature and moisture in the surface layer of the tilled treatments were greater during the corn cycle than in untilled treatments, due to differences in intensity of soil mobilization and mulch remaining after soil management. Nutrient sources affected soil temperature and moisture in the most intense part of the corn growth period, and were related to the variation of the corn leaf area index among treatments

ORGANIC PHOSPHORUS FRACTIONS IN SOIL FERTILIZED WITH CATTLE MANURE

Inorganic phosphorus (Pi) usually controls the P availability in tropical soils, but the contribution of organic P (Po) should not be neglected, mainly in systems with low P input or management systems that promote organic matter accumulation. The aims of this study were to evaluate the changes in the Po fractions over time in soil fertilized and not fertilized with cattle manure and to correlate Po forms with available P extracted by anion exchange resin. The experiment was carried out under field conditions, in a sandy-clay loam Haplustox. The experimental design was a 2 × 9 randomized complete block factorial design, in which the first factor was manure application (20 t ha-1) or absence, and the second the soil sampling times (3, 7, 14, 21, 28, 49, 70, 91, and 112 days) after manure incorporation. Labile, moderately labile and non-labile Po fractions were determined in the soil material of each sampling. Manure fertilization increased the Po levels in the moderately labile and non-labile fractions and the total organic P, but did not affect the Po fraction proportions in relation to total organic P. On average, 5.1 % of total Po was in the labile, 44.4 % in the moderately labile and 50.5 % in the non-labile fractions. Available P (resin P) was more affected by the manure soluble Pi rather than by the labile Po forms. The labile and non-labile Po fractions varied randomly with no defined trend in relation to the samplings; for this reason, the data did not fit any mathematical model.

Hydrozoa e Scyphozoa existentes no instituto paulista de oceanografia

Continuing the inventory of the Coelenterate Fauna of the Brazilian coast, 23 species of Hydrozoa and a Scyphomedusa are recorded from different points of the coast aproximately between 22º and 24º lat. S. Of these, 14 species were already known from other points of the coast and the remaining 10 were unknown from this latitude. Two species are here listed as new, they are: Halocordyle fragHis and Calicella gabriellae. 1. - Halocordyle fragilis, Stechow's (1923) correction of the generic name Pennaria has been followed, shows remarkable distinctive specific characters such as: alternate distribution of the cladii which do not lie all in the same plane, they are inserted at random on the hydrocaulus with a tendency towards a spiral dexiotropic distribution, sparse distribution of the pedicels which are alternate and not all located on the same side of the hydrocladium, and, finally, the long, wiry aspect of the colony which is as brittle as light glass. This characteristics are not sufficient, to my belief, to establish a new genus, since the polyps and the gonophores are entirely of the Halocordyle type, but they confer upon the species a very peculiar habitus. 2. - Calicella gabriellae forms erect hydrocauli which are extremely soft and flexuose, with hydrothecate and intermediate internodes. The thecae are deep, cylindrical, with a conical base, there are 10-12 long and narrow opercular valves. The gonangia are small, conical, with a short distal digitiform process. The included sporosac exhibits maturing ova. Dynamena heteroclonta described by Jarvis (1922) as a new species, is here considered as a new form of the very variable species Dynamena quadridentata. Schizotricha billardi nom. nov., is specifically separated from Sch. diaphana (Heller) to which it had been identified up to know. The Brazilian colonies agree with the French Somaliland specimens described by Billard (1904) and they are reunited in a new species named after the French worker. The main difference, between the two mentioned species are: shape and size of the gonothecae, of the thecae and of the nematophores. A description is given of all the species not previously recorded from the Brazilian coast as well as biological observations on Olindias sambaquiensis whose shoals during winter months are very large and may entangle partially the fishermen's nets. Its feeding and swimming habits are described and the species proves to be an excellent laboratory animal both for class and research purposes, for it easily endures long transportation (even up to 12 hours during summer months) as well as unoxygenized acquaria and nevertheless greadily feeds on any animal food.

INTERACTIONS OF BIOCHAR AND ORGANIC COMPOUND FOR SEEDLINGS PRODUCTION OF Magonia pubescens A. St.-Hil.

ABSTRACTThe objective of this study was to test the hypothesis that biochar, applied with cattle manure, promotes better development of seedlings of Magonia pubescens St. Hil. The experiment was conducted at the State University of Mato Grosso, Nova Xavantina, Brazil, in 2011. We used a completely randomized design, with twelve treatments and three replications. The substrates formed by the higher levels of cattle manure plus biochar (30%) provided better results of height, diameter and aerial biomass. However, the Dickson Quality Index has not confirmed the quality of seedlings in these treatments. We also observed that the doses of biochar (20 and 30%) when added separately to the Latosol, are not efficient for the growth improvement of the seedlings. Based on the present results, we validate the hypothesis that substrates formed with a mixture of cattle manure and biochar are effective to improve the production of seedlings of M. pubescens.

Fuel consumption of a tractor in function of wear, of ballasting and tire inflation pressure

When using appropriate inflation pressures and load capacity (ballast), it may obtain a higher yield and prolongation of the life of the tire, besides it may minimize the problems of loss of traction, increased slippage and fuel consumption. This study aimed to evaluate the fuel consumption of a tractor operating with new and worn tires in three conditions of ballasting and three inflation pressures, when driving on compacted soil with vegetation cover. The experiment was conducted at the experimental unit from the Department of Animal Science, Federal University of Lavras, state of Minas Gerais, Brazil, in an agricultural soil compacted by cattle trampling and with vegetation cover. It was used a tractor 4x2 with front wheel assist, of a 65.62 kW engine power. The tires were of R1 type, diagonal (front: 12.4 to 24; and rear: 18.4 to 30), the average height of the clutches of the new tires were 0.3 and 0.35 m for front and rear tires, respectively, and for the worn tires were 0.018 and 0.0045 m, for the front and the rear tires, respectively. The results showed advantages for the tractor equipped with new tires.

Potentials of biogas production from young bulls manure fed with different diets

Physical and chemical characteristics of manure are modified by different animal production systems. In cattle feeding system for young bulls there is an inversion of the proportion between forage and concentrate. In other words, the animals receive a smaller amount of forage compared to the traditional system. These changes in the manure characteristics involve changes in the treatment systems. The aim of this study was to determine the potential production of biogas of batch digesters fed with manure from young bulls that received two diets containing different proportions between forage and concentrate, with or without inoculums and submitted to three levels of temperature (25, 35 and 40(0)C). The evaluated parameters were total solids (TS) and volatile solids (VS) reduction and biogas potentials production. The digesters fed with manure from animals that received the diet 2 (80%C + 20% R) showed the largest reductions of TS and VS. About the potentials of biogas production there was interaction between the factors diet and inoculums, but no effects of temperatures. The treatment content manure from animals fed with diet 2 without inoculums presented the greatest potential of biogas production per kg of TS added (0.2123 m³).

Neospora caninum seropositivity in cattle breeds in the South Fluminense Paraíba Valley, state of Rio de Janeiro

The infection by Neospora caninum of different cattle breeds in dairy properties in two municipalities of the South Fluminense Paraíba Valley, state of Rio de Janeiro, was evaluated. Considering a sampling universe of 2,491 cows, blood samples were collected from 563 dairy cows in 57 farms, which were randomically selected in proportion to the number of animals, using a random stratified sampling system. For each property the number of selected cows was proportional to the herd size. Abortion or other reproductive disorders were not considered as criteria for selecting the animals, and seropositivity was determined by indirect enzyme-linked immunosorbent assay (ELISA). A high association (p=0.006) between seropositivity and racial patterns was found. The analysis revealed that in comparison of pure black-and-white Holstein cows versus Zebu (p=0.0028), Holstein cows showed 2.65 times greater odds for seropositivity. In the same way, by comparing black-and-white Holstein versus Zebu + crossbreed Zebu/Holstein (p=0.01), it was noted that there is 2.23 times more chance for seropositivity in Holstein cattle. There were no significant differences concerning the comparison of Holstein cattle versus crossbreed Zebu/Holstein (p=0.08) or Zebu versus crossbreed Zebu/Holstein (p=0.11). This study supports the hypothesis that there is a close association between cattle breeds and the frequency of infection by N. caninum.

Nuclear and mitochondrial DNA markers in traceability of retail beef samples

Several characteristics are important in a traceability system of animal products, such as age at slaughter, breed composition, besides information of the productive chain. In general, the certification agent records information about the animals and the system which it came from, although cannot guarantee that the slaughtering, meat processing and distribution are error proof. Besides, there is a differential price, at least at the international market, based on sex and breed composition of the animals. Genetic markers allow identification of characteristics controlled in the beef cattle traceability program, as sex and breed composition, in order to correctly identify and appraise the final product for the consumer. The hypothesis of this study was that the majority beef samples retailed in the local market originate from female with a great participation of zebu breeds. Therefore, the objective of this work was to characterize retail beef samples with DNA markers that identify cattle sex and breed composition. Within 10 beef shops localized in Pirassununga, SP, Brazil, 61 samples were collected, all were genotyped as harboring Bos taurus mitochondrial DNA and 18 were positive for the Y chromosome amplification (male). For the marker sat1711b-Msp I the frequency of the allele A was 0.278 and for the marker Lhr-Hha I the frequency of the allele T was 0.417. The results of sat1711b-Msp I and Lhr-Hha I allelic frequencies are suggestive that the proportion of indicus genome compared with the taurine genome in the market meat is smaller than the observed in the Nellore breed. The procedure described in this study identified sex and subspecies characteristics of beef meat samples, with potential application in meat products certification in special as an auxiliary tool in beef cattle traceability programs.

Influence of Cutting Conditions on Tool Life, Tool Wear and Surface Finish in the Face Milling Process

The main goal of this work is to study the influence of cutting conditions - cutting speed, feed velocity and feed per tooth - on tool life and surface finish of the workpiece in the face milling of flat surfaces. Aiming to achieve this goal, several milling experiments were carried out with different cutting speeds, feed velocities and feeds per tooth. In the first phase of the experiments, cutting speed was varied without varying feed velocity, which caused a variation in feed per tooth. In the second phase of the experiments, cutting speed and feed velocity were varied in such a way that feed per tooth was kept constant. Tool flank wear and surface roughness of the workpiece were measured as cutting time elapsed. The main conclusions of this work are that a) cutting speed has a strong influence on tool life, regardless of whether feed velocity or feed per tooth varies and b) an increase in surface roughness of the workpiece is not closely related to an increase in wear of the primary cutting edge.