Membranas Inorgânicas e reatores catalíticos

Membrane reactors are reviewed with emphasis in their applications in catalysis field. The basic principles of these systems are presented as well as a historical development. The several kinds of catalytic membranes and their preparations are discussed including the problems, needs and challenges to be solved in order to use these reactors in commercial processes. Some applications of inorganic membrane reactors are also shown. It was concluded that these systems have a great potential for improving yield and selectivity of high temperature catalytic reactions. However, it is still an imerging technology with a need for a lot of fundamental research; several challenges should be overcome for the successful commercial application of these systems.

Poluição química relacionada ao ar de interiores no Brasil

During the last two decades there has been increasing concern within the scientific community related to the effects of indoor air quality on health. Changes in building design devised to improve energy efficiency and new synthetic building materials have contributed to increase pollutant concentrations. These factors have generated poor air quality and caused the development of a lot of symptoms known as Sick Building Syndrome (SBS). In Brazil, there are few studies in this area, collected in this review to support researches and awareness of the need to adopt preventive measures to reach a better quality for the Indoor Environment.

Estudo de homogeneidade de lote de material silício metálico candidato a material de referência

From the perspective of the uncertainties in chemical measurements all uncertainty sources should be part of the uncertainty of the reference material. When the primary methods are not available, interlaboratorial comparisons are used as a means of certification. The material to be distributed to the laboratories should have its homogeneity confirmed. The uncertainty due to this factor will be added to the characterization uncertainty. This work presents a homogeneity study of a lot of silicon metal of chemical degree where the uncertainty due to inhomogeneity is obtained using analysis of variance.

Atropoisomerismo: o efeito da quiralidade axial em substâncias bioativas

Atropisomerism is a special kind of stereoisomeric relationship that arises from the freezing of a certain conformation of an organic molecule, associated with a high rotational barrier about a single covalent bond. Atropisomerism has been originally described in orto-functionalyzed biphenyl derivatives, but a lot of other organic functionalities can present this structural phenomenon, characterized by the presence of chiral properties in compounds that don't present classical stereogenic centers. Atropisomeric compounds, intermediates and catalysts have well-know importance in organic synthesis, but the influence of the axial chirality in substances able to modulate biological systems is still not very exploited in drug design and development. In this context, the present account describes the importance of this structural property in the medicinal chemistry of different classes of bioactive compounds or therapeutic agents, emphasizing how atropisomerism could affect the molecular recognition of a ligand or a prototype by the target bioreceptor.

Procedimentos analíticos para identificação de antocianinas presentes em extratos naturais

Anthocyanins are among the most important plant pigments. Due to their potential benefits for human health, there is considerable interest in these natural pigments. Nonetheless, there is great difficulty in finding a technique that could provide the identification of structurally similar compounds and estimate the number and concentration of the species present. A lot of techniques have been tried to find the best methodology to extract information from these systems. In this paper, a review of the most important procedures is given, from the extraction to the identification of anthocyanins in natural extracts.

Aplicação de fotólise direta e UV/H2O2 a efluente sintético contendo diferentes corantes alimentícios

Food industries employ a lot of synthetic dyes in their products. Most of these dyes are very stable face to the conventional treatments. This work studied the use of advanced oxidation process (AOP) as an alternative to the conventional ones to degrade a synthetic food effluent (photolysis and UV/H2O2 in continuous reactor). The more efficient process was the UV/H2O2 and it presented decoloration and degradation energetic efficiency values equal to 30.775 kWh m-3 and 269.909 kWh m-3, respectively. The color reduction was 96.4% and COD decrease was 38.56%.

A formação inicial em química baseada em conceitos representados por meio de modelos mentais

The current legislation determines that the chemist must have a solid comprehension about chemical concepts. Literature presents the concept of mental model, which is determinant to the learning of phenomena and concepts. This paper presents some mental models that students of the Chemistry course at UFSCar have about chemical concepts. A lot of incoherence was observed in student's mental models, which is an evidence that there are problems in the learning of chemistry education.

Treatment for purification water of biodiesel using electrofloculation

Biodiesel was created as a solution for a great economic and enviromental problem of petroleum, a resource with sustainable characteristics. But its production still needs optimization, because it uses a lot of water and generates a large volume of this residue, which appears improper to disposal without correct treatment. This work propose an economic, viable and efficient way to treat the Biodiesel purification water, not only aiming at a proper disposal, but the reuse as input in the process, generating a large industrial economy, and greater environmental progress. For both treatment uses the electrofloculation technique.

Panorama de propriedade intelectual, transferência de tecnologia e inovação da química brasileira e a comparação com os países do BRIC

Based on Science, Technology & Innovation (ST&I) indicators, Brazil is a competitive and interesting country from the point of view of technological foreign investment. However, it is still incipient with regard to national investments, production of technological knowledge, inbound mobility of scientists and technology transfer to the productive sector. Among many other factors, global patent production is considered as an important indicator of innovation. Likewise, the balance between revenue and expenses obtained through royalties and licensing fees of technologies is also critical in mapping the diffusion and absorption of knowledge. The understanding of intellectual property and its strategic management brings a significant advantage to the economic and technological development of nations, especially in the field of chemistry, which greatly contributes to biotechnology, new materials and microelectronics - three fundamental areas for innovation in developed countries. Therefore, this article aims to map out competencies in chemistry in Brazil and evaluate science, technology and innovation indicators in the country, comparing this dynamic to the one of other BRIC members (Russia, India and China). Chemistry is the fourth biggest field of interest in Brazil based on the number of researchers registered at the governmental platform for researchers, Plataforma Lattes/CNPq, and is preceded by education, medicine and agronomy. The majority of research groups are registered in the area of materials, followed by macromolecules and polymers, pharmaceutical products and basic materials chemistry. These groups represent approximately 77% of research groups analyzed, therefore, indicating a tendency in the country. The analyses of patents in different sub-areas of chemistry reveal that non-residents file most deposits in the country, a probable reflection of the low internal intellectual property culture. Pharmaceutics and Fine Chemistry are prominent areas in the country, in line with the global trend. Among BRIC countries, China has the highest number of patents and of requests for protection in international offices. On the other hand, Brazil has the lowest number of chemical patents published at USPTO, EPO and JPO. An analysis of the transfer of technology data indicates an increase in this activity in various sub-areas of chemistry in the country. Despite the great efforts made by the country to consolidate its national innovation system, more needs to be done to put Brazil in a competitive position. In a globalized world dominated by large players, Brazil needs a lot of progress on ownership and generation of chemistry technologies to strengthen its national sovereignty. It is essential to strengthen chemical research at all levels, from elementary school to university, as an inexhaustible source of knowledge and technology that, when properly protected, may generate real public achievement and social return.

Detecção e caracterização biológica e molecular de Rupestris stem-pitting associated virus e seu efeito na fotossíntese de videiras

Rupestris stem pitting associated virus (RSPaV) é o agente causal das "caneluras do tronco de Rupestris" da videira (Vitis spp.). Neste trabalho, um isolado de RSPaV, encontrado em videiras cv. Cabernet Franc no Rio Grande do Sul, foi estudado. O vírus foi detectado biologicamente, por enxertia em videira indicadora cv. Rupestris du Lot, em 26,2% das amostras avaliadas. A seqüência parcial do gene da replicase do RSPaV, isolado sul-brasileiro, com 831 nucleotídeos amplificados por RT-PCR e 276 aminoácidos deduzidos, apresentou maior identidade de nucleotídeos (98,1%) e aminoácidos deduzidos (99,6%), com dois isolados norte-americanos. O RSPaV estudado apresentou baixa homologia (37-41%) com outros vírus do gênero Foveavirus. A maioria das mudas de videira cv. C. Franc infetadas com RSPaV apresentou diminuição no potencial fotossintético (2,68 a 5,12 vezes) e aumento na taxa respiratória no escuro quando comparadas a mudas sadias, salientando os impactos que esse vírus pode proporcionar no potencial produtivo de videiras.

Detection and transmission of Drechslera avenae from oat seed

Detection, symptoms and symptomless transmission of Drechslera avenae (teleomorph Pyrenophora avenae) from seed were investigated. The present study reported that the D. avenae is frequently found in oat (Avena sativa) seed in Argentina. The prevalence of the seed lot infected was 54%. The incidence of seeds infected by D. avenae in the various seed lots from different regions ranged from 0 to 52% (overall mean of 7%). Besides conidia on conidiophore and immature pseudothecia, D. avenae produced small, spherical to pear-shape picnidia containing tiny conidia, on the seed surface. The pathogen was efficiently transmitted at a rate of 55% from seed to coleoptile tips in symptomless seedlings and at 12.5% to plumules. The importance of the infected seed and its epidemiological role are discussed.

Effect of Fusarium graminearum and infection index on germination and vigor of maize seeds

Pathogens in maize (Zea mays) seeds cause serious problems, such as the loss of their capacity to germinative. The objectives of this study were to identify the optimal period for infection of maize seeds on agar colonized by Fusarium graminearum, when incubated for 4, 8, 16 and 32 h, and to evaluate the effect of the fungus on the germination and vigor of seeds with different infection levels. After the respective incubation periods, the seeds were removed from the culture medium and submitted to the blotter test for 3 min with and without superficial disinfection with 1% solution of sodium hypochlorite. Once the optimal period for seed incubation was identified, seeds from the same sample were again placed on the colonized agar for infection. Germination and vigor tests (accelerated aging and cold test) were performed with a mixture of healthy seeds (placed on PDA medium) and inoculated seeds, resulting in seeds with 0, 20, 40, 60, 80 and 100% rates of infection. The results showed that a period of 32 h was long enough to obtain seeds infected by the pathogen. There were no significant effects of fungal infection on seed germination at any of the infection levels, probably due to the high vigor of the maize seed lot tested. Regarding vigor tests, infection levels differed significantly from the control (0% infection), but there were no significant differences among the infection levels.

Germination of Caesalpinia leiostachya (benth.) ducke seeds classified by size and shape

Caesalpinia leiostachya (Benth.) Ducke (Caesalpiniaceae) is a Brazilian legumenous tree whose seeds present different sizes and shapes, with dormancy imposed by a waterproof coat. In order to improve that quality of lot, seeds were classified by width in sieves of circular meshes (13, 14, 15, 16 and 17) and manually separated by shape in elongate, round and angular. Masses of 1000 seeds were determined and the thickness of each width and shape seedclass was measured, and coat permeability of the seeds classified by the width was investigated. Seeds were scarified in concentrated sulphuric acid and submitted to the germination test. Both final percentage and speed of germination index were evaluated. The classification of the seeds improved the quality of the lot, and the coat permeability was not affected by seed width. Elongated-flat seeds are of low physiological quality and should be discarded. Masses of 1000 seeds, percentage final and speed of germination increased with the width of the seeds. Both elongated and angular seeds had similar germinative behavior, and round seeds are of greater thickness and of superior physiological quality.

Energetic efficiency of a deep bed swine production system

The aim of this work was to evaluate the energy flows of a commercial production system of swine deep bed in its finishing phase, located in Juiz de Fora, in the State of Minas Gerais, Brazil. Thus, an energy efficiency study was carried out by monitoring a lot of animals, during a 94-day period. The energy rate of each compound involved in the production process was quantified and the matrixes of energy consumption were determined in the form of animal feeding, electrical energy, piglets, material used as deep bed, human labor, equipment, swine buildings, production of alive swine for slaughter, organic fertilizer production (swine deep bed or swine deep litter). From the direct input energy, 80.57% correspond to animal feeding, 11.90% to pigs for slaughter and 6.76% to piglets, while from the energy output 53.45% correspond to the terminating swine and 46.55% to organic fertilizer (swine deep bed). By the results obtained, we can conclude that such production system has corresponded to an industrial and highly specialized agro ecosystem, importing a great part of the energy consumed in the production process, with 41% of energy efficiency.

Influence of tail biting on weight gain, lesions and condemnations at slaughter of finishing pigs

The present study assessed the association of tail-biting lesions in finishing pigs with weight gain, occurrence of locomotion or respiratory disorders and abscesses during finishing period, and carcass condemnation at slaughter. The study was carried out on 4 different farms. For each animal with a tail biting lesion, two control pigs were selected. The total number of animals in the study was 312, with 104 of them being tail-bitten. Tail lesions were classified according to the degree of severity into four scores: score 0 -normal tail withou lesion; score 1-3 - increasing lesion severity, and score 4 - healed lesions. Overall, the occurrence of severe tail lesions (score 3) varied from 55 to 73% of tail-bitten pigs among farms. On all farms, healing of tail lesions was observed in 95% to 100% of the animals at the evaluation performed within 41-43 days after the commencement of the study. In two out of the four evaluated farms, pigs with score of 3 showed lower weight gain (P<0.05) compared with score 0 pigs. Before slaughter, the occurrence of locomotion problems and nodules/abscesses was associated (P<0.05) with the presence of tail-biting lesions. At slaughter, tail-biting lesions were associated (P<0.05) with the presence of abscesses, lung lesions (pleuritis and embolic pneumonia) or arthritis in carcasses. Carcass condemnation was associated with the presence of tail-biting lesions (P<0.05). Overall, carcass condemnation rate was 21.4%, of which animals with tail-biting lesions accounted for 66.7% of condemnations. Among the animals diagnosed with cannibalism at farm level, only two had not healed their lesions at slaughter. The fact that there were a lot of carcass condemnations, despite the fact that tail-bitten animals had no more active lesions, suggests that different situations may be observed between the field and slaughter, reinforcing the need to analyze pigs both at farm and slaughter to allow proper assessment of losses related to tail biting. Collectively, the observations of the present study show that complications associated with tail-biting found in slaughterhouses are probably underestimating field prevalence.