369 resultados para anomalous Eu3 5D0->F-7(0) transition
Resumo:
The growing interest in lipase production is related to the potential biotechnological applications that these enzymes present. Current studies on lipase production by submerged fermentation involve the use of agro-industrial residues aiming at increasing economic attractiveness. Based on these aspects, the objective of this work was to investigate lipase production by Penicillium verrucosum in submerged fermentation using a conventional medium based on peptone, yeast extract, NaCl and olive oil, and an industrial medium based on corn steep liquor, Prodex Lac (yeast hydrolysate), NaCl and olive oil, as well as to characterize the crude enzymatic extracts obtained. Kinetics of lipase production was evaluated and the highest enzymatic activities, of 3.15 and 2.22 U.mL-1, were observed when conventional and industrial media were used, respectively. The enzymatic extract showed optimal activity in the range from 30 to 40 °C and at pH 7.0. Although the industrial medium presents economical advantages over the conventional medium, the presence of agro-industrial residues rich in nitrogen and other important nutrients seemed to contribute to a reduction in lipase activity.
Resumo:
A análise da presença de enzimas oxidativas como a peroxidase (POD) e a polifenoloxidase (PPO) e o controle da atividade destas enzimas são importantes na preservação e no processamento de alimentos. Este trabalho teve por objetivo determinar a atividade enzimática da polifenoloxidase (PPO) e da peroxidase (POD) do palmito de pupunha, bem como avaliar o comportamento destas enzimas frente ao tratamento térmico e assim calcular a cinética de inativação térmica das mesmas para suas porções termorresistente e termolábil. Para a extração de peroxidase (POD) e polifenoloxidase (PPO) de palmito, utilizou-se solução tampão fosfato de sódio 100 mM com diferentes pHs (5,5; 6,0; 6,5 e 7,0). O melhor pH de extração da POD foi 5,5 e da PPO, 6,5. Estes extratos foram tratados em diferentes temperaturas (65, 70, 75 e 80 °C) por perÃodos de 1 a 10 minutos. A POD e a PPO sofreram um decréscimo de 70 e 80%, respectivamente, em relação à s suas atividades iniciais. As energias de ativação, nas temperaturas estudadas, para a porção termolábil e termorresistente da peroxidase foram 154,0 e 153,0 kJ.mol-1, respectivamente, enquanto que para a polifenoloxidase foram 26,3 e 27,0 kJ.mol-1, respectivamente. Resultados apresentaram valores que estão dentro da faixa de energia de ativação reportada para o processo de inativação térmica de enzimas.
Resumo:
O presente estudo tem como objetivo determinar o teor de colesterol total em amostras de pescado de água marinha e doce. As amostras analisadas foram o pargo marinho, Lutjanus purpureus, e os seguintes peixes de água doce: tilápia do Nilo, Oreochromis niloticus, curimatã, Prochilodus cearensis e a sardinha, Triportheus angulatus, adquiridas em pontos comerciais (frigorÃficos, feira de pescado da praia de Mucuripe e feira-livre suburbana) de Fortaleza - Ceará. Além da determinação do teor de colesterol, também foram avaliados a composição quÃmica centesimal e o valor calórico das amostras. O teor médio de colesterol (mg.100 g-1) apresentado foi 33,5 para o pargo, 28,4 para a tilápia, 93,8 para o curimatã e 61,2 para a sardinha. Em relação à composição centesimal, os seguintes teores médios foram obtidos, respectivamente, para pargo, tilápia, curimatã e sardinha: 80,7; 80,2; 76,4 e 77,2% de umidade; 18,4; 17,7; 18,7 e 17,6% de proteÃna total; 1,0; 1,2; 3,2 e 4,6% de lipÃdio total; 0,7; 0,8; 0,8 e 1,0% de cinza, e 0,5; 0,6; 2,0 e 0,3% de carboidratos. O valor energético médio (kcal.100 g-1) foi de 83,6 para o pargo, 83,7 para a tilápia, 108,4 para o curimatã e de 111,8 para a sardinha.
Resumo:
A produção de poligalacturonase pelo termofÃlico Bacillus sp. SMIA-2, cultivado em meio lÃquido contendo pectina cÃtrica como única fonte de carbono, alcançou a sua máxima atividade enzimática em 30 horas, com nÃveis de 42 IU.mL-1. Entre as várias fontes orgânicas e inorgânicas de nitrogênio testadas, o sulfato de amônio foi a que proporcionou maior atividade da poligalacturonase. O aumento da concentração da pectina cÃtrica, no meio de cultura, acima de 0,5% não proporcionou um aumento da atividade da enzima. O microrganismo foi capaz de utilizar uma variedade de fontes de carbono, mas a atividade da poligalacturonase variou com cada fonte. Pectina de maçã foi a melhor fonte de carbono para a secreção da poligalacturonase (56 IU.mL-1), enquanto frutose e maltose não foram muito efetivas. Galactose, rafinose e glicose inibiram a sÃntese da enzima. Estudos sobre a caracterização da poligalacturonase revelaram que a temperatura ótima dessa enzima foi 70 ºC e que ela manteve 62 e 58% de sua atividade máxima quando incubada por 2 horas a 40 e 90 ºC, respectivamente. O pH ótimo para atividade da enzima foi 7,0. A enzima manteve 90 e 75% de sua atividade máxima quando incubada a pH 8,0 e 8,5, respectivamente, por 24 horas, à temperatura ambiente. A atividade enzimática foi estimulada pelos Ãons Mg2+ e Zn2+. Por outro lado, foi inibida pelos Ãons Cs+2, Hg+2, Li+2 e Sr+2.
Resumo:
A eficiência da aplicação de filmes à base de proteÃnas de soro de leite foi avaliada em um sistema de embalagem que consistia em um pote plástico utilizando-se filmes de proteÃnas de soro de leite como fechamento superior. Pedaços de maçã foram embalados e armazenados à temperatura ambiente (25 °C) e sob refrigeração (10 °C). Os filmes proteicos à base de soro de leite foram obtidos por três procedimentos distintos: por desnaturação térmica; com a incorporação de ácido esteárico (0,5%, em massa); e por modificação enzimática utilizando-se a transglutaminase microbiana (10U/g proteÃna, ACTIVA TG-B ), a partir de uma formulação básica de 6,50% de proteÃna, 3,0% de plastificante (glicerol) e pH 7,0. A integridade dos filmes após embalagem e durante armazenamento foi observada, medindo-se as propriedades mecânicas dos filmes. A permeabilidade ao vapor d'água foi avaliada pela perda de massa, teor de umidade, e variação de textura dos pedaços de maçã. Os resultados indicaram que os filmes apresentam uma barreira moderada à umidade, apresentando diferença entre potes com e sem coberturas de filmes. A permeabilidade ao oxigênio foi conferida pelo escurecimento enzimático das maçãs pela ação da enzima polifenoxidase, apresentando diferença em relação ao das amostras acondicionadas em atmosfera modificada com gás N2.
Resumo:
Tendo como objetivo a obtenção de hidrolisados proteicos de farinha de trigo com baixo teor de fenilalanina (Phe), foram preparados, inicialmente, extratos proteicos da farinha de trigo, empregando-se método enzimático pela ação de protease de Bacillus licheniformis. Em seguida, esses extratos foram hidrolisados sob a ação do extrato enzimático bruto (EEB), obtido de casca de abacaxi, e de pancreatina comercial; e alguns parâmetros hidrolÃticos foram avaliados, tais como temperatura (30; 35; 40; 50; e 70 °C), tempo (1 hora e 30 minutos; 2 horas e 30 minutos; 3 horas e 30 minutos), e pH de reação (6,0; 7,0; 8,0 e 9,0). Para a remoção de Phe, empregou-se o carvão ativado (CA) e a eficiência deste processo foi avaliada determinando-se o teor de Phe por espectrofotometria derivada segunda, na farinha de trigo, assim como nos hidrolisados após tratamento com CA. Para os três parâmetros estudados, observaram-se efeitos variados sobre a remoção de Phe, sendo que os melhores resultados foram encontrados ao se empregar a associação sucessiva de EEB (E:S 10:100, 1 hora e 30 minutos), com a pancreatina (E:S 4:100, 3 horas e 30 minutos), em pH 7,0 a 50 °C, tendo atingido 66,28% de remoção de Phe, o que corresponde a um teor final de Phe de 522,44 mg.100 g-1 de hidrolisado.
Resumo:
Sugar cane juice or garapa darkens quickly after extraction due to the oxidation of some of its constituents harming its commercialization thus requiring rapid consumption. The objective of this study was to develop a mild process for sugar cane clarification, obtaining a cloudy, greenish-yellow beverage. The following parameters were combined to aiming at this objective: heat treatment at 65 ºC/50 minutes; pH change (to 7.0, 7.5, and 8.0); addition of flocculant (0, 30, and 60 ppm Aluminum polychloride or APC - "Panclar P-1010"), and clarifier aid (0, 2, or 4 ppm of positively charged polyelectrolyte - "Magnafloc LT-27"). The decantation time was 45 minutes and the supernatant liquid was removed with a vacuum pump. The treatments were defined using the Response Surface Methodology and were submitted to physicochemical analysis for turbidity (%), total polysaccharide content (µg.mL-1), dextran content (µg.mL-1), and sensory analysis (acceptance test) for the attributes of color, appearance, and turbidity. It was concluded that the addition of 60 ppm APC, pH 8, and 0 ppm polyelectrolyte represented the best treatment to obtain a low polysaccharide content, 90% turbidity, and high scores for color, appearance, and turbidity. The beverage was sensorially well accepted by consumers.
Resumo:
A crude extract of Spondias spp. was evaluated for the influence of pH and temperature on the activity and stability of its peroxidases and polyphenol-oxidases. In order to evaluate the conditions for the inactivation of the enzymes by heat treatment and by addition of a reducing agent, a factorial experimental design (n = 3) was employed using the Statistica (6.0) software package for data analysis. The optimal conditions found for peroxidases were: pH = 5.0 and temperature = 40 ºC, and for polyphenol-oxidases they were pH = 7.0 and temperature = 40 ºC. The peroxidases and polyphenol-oxidases were stable at all pH values tested (3.0 - 10.0) and maintained more than 60% of their activity at temperatures above 30 and 40 ºC, respectively. To achieve the total inactivation of these enzymes, two alternatives can be suggested: incubation at 92 ºC for 3.15 minutes with 200 mg.L-1 of ascorbic acid or incubation at 96 ºC for 2.80 minutes with 100 mg.L-1 of ascorbic acid.
Resumo:
A biosensor was developed for spectrophotometric determination of glucose concentrations in real samples of orange juice energetic drinks, and sport drinks. The biosensor consisted of glucose oxidase (GOD) and horseradish peroxidase (HRP) immobilized onto polyaniline activated with glutaraldehyde (PANIG). Immobilization parameters were optimized for GOD, and maximum immobilization yield was 16% when 5.0 mg of PANIG and 8.9 U prepared in 0.1 mol.L-1 sodium phosphate buffer (pH 7.0) reacted for 60 minutes at 4 °C with gentle stirring. The linear operational range for glucose determination using optimized operational parameters was between 0.05 and 6.0 mg.mL-1 with a very good reproducibility of response. The results obtained in the biosensor were compared with those obtained using free enzymes (commercial kits) and then validated through statistical analysis using the Tukey test (95% confidence interval).
Resumo:
Several studies have shown the antimicrobial and antioxidant properties of turmeric (Curcuma longa), widely used in food industry as a colorant, among other functions. The aim of this study was to determine the antioxidant and antimicrobial properties of turmeric essential oil against pathogenic bacteria and to study the influence of the addition of ascorbic acid on the prevention of polyphenols oxidation. The commercial turmeric essential oil alone did not show bactericidal activity against the microorganisms studied, Listeria monocytogenes and Salmonella typhimurium, but when combined with ascorbic acid, it showed significant antibacterial activity. The highest antimicrobial activity of turmeric essential oil against Salmonella typhimurium was 15.0 ± 1.41 mm at the concentration of 2.30 mg.mL-1 of essential oil and 2.0 mg.mL-1 of ascorbic acid. With regard to Listeria monocytogenes, the largest zone of inhibition (13.7 ± 0.58 mm) was obtained at the same concentrations. The essential oil showed antioxidant activity of EC50 = 2094.172 µg.mL-1 for the DPPH radical scavenging method and 29% under the concentration of 1.667 mg.mL-1 for the β-carotene bleaching method.
Resumo:
Due to the fact that previous studies on the enzymatic activity of Glutathione peroxidase (GSH-Px) diverge widely in their methodology and results, this study aimed to investigate the influence of different analytical conditions on GSH-Px activity in chicken thighs from broilers that were fed different diets with different sources and concentrations of selenium. GSH-Px activity was evaluated six hours after slaughter and 120 days after frozen storage at -18 ºC. The different analytical conditions included time of pre-incubation (0, 10 and 30 minutes), reaction medium, types of substrate (H2O2 (0.72 mM, 7.2 mM, and 72 mM) and Terc-butil hydroperoxide 15 mM), and different buffer concentrations (buffer 1, potassium phosphate 50 mM pH 7.0 + EDTA 1 mM + mercaptoethanol 1 mM, and buffer 2, tris-HCl 50 mM pH 7.6 + EDTA 1 mM + mercapthanol 5 mM). The results show that the highest GSH-Px activity was observed when enzyme and substrate were in contact at 22 ºC without any pre-incubation, and that, when used at concentrations above 0.72 mM, hydrogen peroxide saturated the GSH-Px enzyme and inhibited its activity. The enzyme presented higher affinity to hydrogen peroxide when compared to terc-butil peroxide, and the addition of a buffer containing mercaptoethanol did not increase GSH-Px enzymatic activity. The activity of GSH-Px was not influenced by the source and concentration of selenium in the diet either. The obtained results allowed the determination of the best temperature of contact between the enzyme and substrate (22 ºC), the optimum concentration, and the type of substrate and buffer to be used. This information is extremely useful for future studies on GSH-Px activity in meat due to the divergence and little information found in the literature.
Soymilk plain beverages: correlation between acceptability and physical and chemical characteristics
Resumo:
The objective of the research was to relate the physical and chemical characteristics of soymilk plain beverages to its sensory acceptance. Five commercial products and a new product formulated based on the less accepted sample were used. The overall acceptance was evaluated by 102 assessors using a 10-point hybrid hedonic scale. The hedonic scores ranged from 3.8 (sample E) to 7.0 (A). Most assessors (55%) preferred sample A, which was viscous (26.6 cp), dark (L* = 77.7), and slightly acidic (pH = 6.6). Sample C, which had lower solid content and higher acidity, was preferred by 29% of the assessors. These two beverages showed the greatest commercial potential of the products analyzed. The least-accepted sample (E), preferred by 8% of the assessors, had a lighter color (L* = 96.8), lower viscosity (13.5 cp), higher lipid content (2.2 g/100 g), and less protein (1.68 g/100 g) than the other products evaluated. A reformulation of the least preferred product (E) with the addition of maltodextrin and also vanilla and milk flavors increased its acceptance, yielding an average score of 7.2. Overall, it was observed that a soymilk plain beverage with higher viscosity, darker color, and higher protein content best meets consumer expectations.
Resumo:
Marolo, also known as araticum or head-to-black, is a globular berry, a species native to the Brazilian savannah. The aim of this study was to evaluate the physical, chemical, and microbiological stability of frozen marolo pulp during 12 months of frozen storage. It was observed that the levels of ash (0.28-0.22%), protein (0.77-0.71%), lipids (1.75-1.73%), carbohydrates (12.1-10.15%), calorie (67.23-59.01 kcal), sucrose (2.50-1.29%), citric acid (435.63-197.5 µg.g-1), tartaric acid (4.38-1.88 µg.g-1) , acetic acid (470.38-279.25 µg.g-1), ascorbic acid (3.00-0.00 µg.g-1), total pectin (0.67-0.39%), pH (3.88-3.83), and b* chromaticity coordinates (24.85-20.53) decreased reduced during storage, whereas the levels of moisture (85.10-87.19%), color parameters (L* 58.89-62.62 and a* 5.37-7.86), reducing sugars (4.53-5.62%), total soluble sugars (7.1-7.36%), soluble solids (7.0-8.4 ºBrix), total acidity (0.9-1.0%), malic acid (514.13-781.25 µg.g-1), soluble pectin (0.16-0.24%), and antioxidant (6.85-37.35% of DPPH discoloration) increased over the one-year of storage period. According to the physical, chemical, and microbiological parameters assessed, the product can be stored for 12 months without loss of quality with addition of citric acid as a preservative.
Resumo:
The search for efficient and accessible cooling systems has increased worldwide. This study aims to build and evaluate an evaporative cooling system using a water driven ejector, allowing it to be installed in places with plenty of water. The system was investigated varying the flow rate and temperature of the circulating water, temperature of the replacement water, and coefficient of performance. The best vacuum obtained was 8.5 kPa at nominal operating conditions of 4.1 ± 0.1 m³/h and 5 ± 0.5 ºC for the circulating water reaching the temperature of 9.7 ± 0.5 ºC. The pulse-like disturbance generated by replacing the cooling water at different periods of times did not result in significant affect vacuum destabilization and the temperature rise in the cooling tank. The coefficient of performance of the system at the highest thermal power of 92.27 W was 0.077, which was underestimated due to possible problems related to pump efficiency. The system evaluated under the conditions proposed can be very efficient for cooling fluids at higher temperatures, and it can be complementary to main refrigeration systems.
Resumo:
The interaction between three phenolic compounds (catechin, caffeic acid and ferulic acid) onto two dietary fibres (cellulose and xylan) has been evaluated to inquire possible interferences on the biodisponibility of phenolic compounds. The adsorption kinetics were performed using solutions containing 100 mg/L of phenolic compounds during a contact time ranging between 10 and 120 minutes at pH 2.0, 4.5, and 7.0. After the kinetics, isotherms were obtained using phenolic compounds concentration ranging between 10 and 80 mg/L during 60 minutes, at pH 2.0 and 7.0 and temperature of 36 °C. Results indicate that adsorbed quantities mainly changed in function of pH, however the maximum adsorption was only of 0.978 mg of caffeic acid/g of xylan at pH 2 and after 60 min. Redlich-Peterson model were able to predict the adsorption isotherms of all phenolic compounds onto cellulose, except for caffeic acid at pH 7.0. The low adsorption capacities observed suggest that both dietary fibres are unable to compromise the biodisponibility of phenolic compounds, especially in the small intestine, where they are partially absorbed.